A Prediction Rule for the Dystonic Spread of Blepharospasm: A 4-Year Prospective Cohort Study.

OBJECTIVE: Blepharospasm (BSP), focal dystonia with the highest risk of spread, lacks clear understanding of early spreading risk factors and objective prognostic indicators. We aimed to identify these risk factors through clinical and electrophysiological assessments, and to establish a predictive model for dystonic spread in BSP. METHODS: We prospectively followed BSP patients for 4 years, collecting data on dystonic spread, and conducting electrophysiological evaluations. The blink reflex, masseter inhibitory reflex, and trigeminal somatosensory evoked potential were assessed. Univariable and multivariable Cox proportional hazard regression models were used to assess clinical characteristics associated with BSP dystonic spread. A predictive model was constructed using a nomogram, and performance of the model was evaluated using the area under the receiver operating characteristic curve. RESULTS: A total of 136 enrolled participants (mean age 56.34 years) completed a 4-year follow-up. Among them, 62 patients (45.6%) showed spread to other body regions. Multivariable Cox regression analysis showed that a high Hamilton Anxiety Scale score (hazard ratio 1.19, 95% confidence interval 1.13-1.25, p < 0.001), prolonged trigeminal somatosensory evoked potential mandibular branch P1-N2 peak interval (hazard ratio 1.11, 95% confidence interval 1.02-1.21, p = 0.017), and elevated trigeminal somatosensory evoked potential mandibular branch P1-N2 peak amplitude (hazard ratio 1.26, 95% confidence interval 1.12-1.41, p < 0.001) were independent risk factors for BSP dystonic spread within 4 years. Combining these factors, the predictive models demonstrated excellent discriminative ability, with the receiver operating characteristic curve score being 0.797, 0.790, 0.847, and 0.820 at 1, 2, 3 and 4 years after enrollment, respectively. INTERPRETATION: We established a predictive model with significant value for anticipating dystonic spread in BSP, offering crucial evidence. These findings contribute essential insights into the early clinical identification of the development and evolution of BSP diseases. ANN NEUROL 2024.

Subjective and objective analysis of orthodontic expert consensus on the assessment of orthodontic treatment outcomes.

OBJECTIVE: The objective of the study was to explore and validate the consensus of orthodontic experts on the assessment of orthodontic treatment outcomes based on subjective and objective analysis. MATERIALS AND METHODS: The research consisted of two parts: the exploration and verification of expert consensus. First, a sample of 108 cases randomly selected from six dental schools in China were evaluated by 69 orthodontic experts and measured by researchers based on post-treatment study casts and lateral cephalograms, respectively. Then, through statistical analysis, the objective indicators significantly correlated with experts' subjective evaluations were selected, their weights were determined, and the critical values of satisfactory, acceptable and unacceptable grades were screened. Subsequently, another sample of 72 cases were evaluated by another 36 orthodontic experts, and the subjective evaluation results were compared with the objective measurement results. RESULTS: There were six model indicators and seven cephalometric indicators being significantly correlated with the experts' subjective evaluations, including occlusal contact, overjet, midline, interproximal contact, alignment, occlusal relationship, L1/NB, ANB, SN/OP, U1/SN, LL-EP, Cm-Sn-UL and Ns-Prn-Pos, with a cumulative R2 of 0.704. In the verification part, the correlation coefficient between the 36 experts' subjective scores and objective regression scores was 0.716 (P < .001); the correlation coefficient between the 36 experts' subjective grades and objective grades was 0.757 (P < .001). CONCLUSIONS: Orthodontic experts had good consistency in the subjective evaluation of the combined records of post-treatment study casts and lateral cephalograms. The objective indicators selected from subjective and objective analysis had good reliability and validity and could further improve the existing occlusal indices.

The measurement of molecular interactions, structure and physical properties of okara cellulose composite hydrogels using different analytical methods.

BACKGROUND: Aiming to address the practical problems of a low utilization rate and the serious waste of soybean residue, novel composite hydrogels based on okara cellulose before and after 2,2,6,6-tetramethylpiperidine oxide (TEMPO) oxidation and high polymers of chitosan (CH), carrageenan (CA) or Arabic gum (AG) were prepared by a homogeneous mixture in ionic liquid. RESULTS: In the present study, composite hydrogels fabricated from okara cellulose and CH, CA or AG were prepared by dissolving them in an ionic liquid, followed by heating (100 °C, 3 h) and then soaking them in a 1:1 water-isopropanol solution. The composite hydrogels prepared from TEMPO oxidation-treated cellulose were physically cross-linked to CH, CA or AG. The results showed that the intramolecular hydrogen bonds in the amorphous regions of the cellulose were disrupted, whereas the intermolecular hydrogen bonds between the biopolymers were increased, which promoted the formation of composite gels with crystalline structures. The TEMPO treatment increased the gel strength. For example, for the cellulose/CA gels, the hardness, fracturability, springiness and cohesiveness values were 5.9-, 4.3-, 2.4- and 3.6-fold higher compared to the non-treated ones, respectively. The composite hydrogels exhibited good thermal stability, swelling properties and mechanical properties. These novel composite polysaccharide-based hydrogels may therefore have great potential in various food and non-food fields. CONCLUSION: In summary, the addition of polymers (CH, CA or AG) and TEMPO oxidized cellulose was suitable for increasing the swelling, textural properties, thermal stability and rheological properties of hydrogels, which provides new ideas and new methods for the preparation of bio-based composite hydrogels. © 2022 Society of Chemical Industry.

EFFECTS OF POST-EXTRACTION ALVEOLAR RIDGE PRESERVATION VERSUS IMMEDIATE IMPLANT PLACEMENT: A SYSTEMATIC REVIEW AND META-ANALYSIS.

OBJECTIVES: This systematic review aimed to compare the clinical data including success rates, tissue preservation, esthetic results, and patient-reported outcomes between delayed implant placement after alveolar ridge preservation (ARP) and immediate implant placement (IIP). MATERIAL AND METHODS: Both electronic and manual searches were performed for randomized controlled trials and cohort studies consisting of at least 10 cases per group and a follow-up of at least 1-year in duration. The primary outcome was the implant success rate and secondary outcomes were changes in marginal bone level (MBL), pink esthetic score (PES) and patient reported outcomes consisting of complications and satisfaction. RESULTS: A total of 12 studies were included (8 randomized controlled trials and 4 cohort studies). This review contained 456 implants placed after ARP and 459 implants placed through IIP. The results from this meta-analysis showed that the success rates of implants placed through ARP protocol (98.68%) was significantly higher than that of implants placed through IIP protocol (95.21%) (RR = 1.03; 95% CI [1.01; 1.06]; P = .008; I2 = 0%). CONCLUSION: The results from this meta-analysis and systematic review showed that implants placed through ARP protocol may demonstrate higher success rates compared to implants placed through IIP.

The production of bacterial cellulose in Gluconacetobacter xylinus regulated by luxR overexpression of quorum sensing system.

Quorum sensing is a mechanism that facilitates cell-to-cell communication. Through signal molecular density for signal recognition, which leads to the regulation of some physiological and biochemical functions. Gluconacetobacter xylinus CGMCC 2955, which produces bacterial cellulose (BC), synthesizes the LuxR protein belonging to the LuxI/LuxR type QS system. Here, a luxR overexpression vector was transformed into G. xylinus CGMCC 2955. The overexpression of luxR increased the yield of BC by 15.6% after 16 days static culture and reduced the cell density by 15.5% after 120-h-agitated culture. The glucose was used up by G. xylinus-pMV24-luxR at 72-h-agitated fermentation, which 12 h earlier than the wild-type (WT). The total N-acylhomoserine lactones (AHL) content of the luxR-overexpressing strain and the WT strain attained 1367.9 ± 57.86 mg/L and 842.9 ± 54.22 mg/L, respectively. The C12-HSL and C14-HSL contents of G. xylinus-pMV24-luxR were 202 ± 21.66 mg/L and 409.6 ± 0.91 mg/L, which were significantly lower than that of WT. In contrast, C6-HSL showed opposite results. The difference of AHL content proved that overexpression of luxR improved the binding of AHL and showed preference for some specific AHL. The metabolic results demonstrated that upon glucose exhaustion, the consumption of gluconic acid was promoted by luxR overexpression, and the content of D- ( +)-trehalose, an antiretrograde metabolite, increased significantly. KEY POINTS: • The overexpression of luxR increased the yield of bacterial cellulose • The content of signal molecules was significantly different • Differential metabolites were involved in multiple metabolic pathways.

Correlation between esthetic expectations for orthognathic treatment and psychological characteristics among Chinese adult patients.

INTRODUCTION: This study aimed to evaluate the association of esthetic expectations with self-reported personal characteristics, anxiety, depression, self-esteem, oral health-related quality of life, and the Orthognathic Quality of Life Questionnaire (OQLQ) in Chinese adult patients before orthognathic treatment. METHODS: This study involved 213 patients with clinically significant skeletal deformity requiring orthognathic surgery for comprehensive treatment. Each patient completed a series of Chinese version scales, including the self-rating anxiety scale, self-rating depression scale, self-esteem scale, the Oral Health Impact Profile-14 questionnaire, and the OQLQ. The patients' self-reported personal characteristics were also recorded, including facial appearance ratings before and after orthognathic treatment, highest education level, mean monthly income, and enthusiasm toward orthodontic or orthognathic treatment. The Least Absolute Shrinkage and Selection Operator multivariate linear regression model was conducted for the selection of the above factors. The final multivariate linear regression model was built with variables identified under the optimal tuning parameter. RESULTS: A total of 213 patients (87 men and 126 women) were included in this study. The patients' esthetic expectation scores were significantly associated with their total scores, which encompassed the education level, mean monthly income, enthusiasm toward orthodontic or orthognathic treatment, self-esteem scale, the Chinese version of the 14-item Oral Health Impact Profile questionnaire, OQLQ, etc. In the multivariate linear regression model, the OQLQ, enthusiasm toward orthognathic treatment, depression, and expected facial appearance score after the treatment were the most important factors to predict esthetic expectation. CONCLUSIONS: High esthetic expectations for orthognathic treatment were mostly associated with higher expected facial appearance scores after the treatment, greater enthusiasm toward orthognathic treatment, worse depression (confusion), and 2 domains (social aspects of deformity and oral function) of OQLQ. Therefore, OQLQ, enthusiasm toward orthognathic treatment, and expected facial appearance score after treatment may be used to predict patients' esthetic expectations before commencing orthognathic treatment in daily clinical practice.

PASS versus MBT™ for evaluation of anchorage control in three-dimensional measurements: a randomized controlled trial.

BACKGROUND: Growth and development might lead to anchorage loss during orthodontic treatment, such as the mesial drift of molars, the compensation characteristics of upper molars following mandibular growth, or the angulation of molars before treatment. Different anchorage reinforcement devices have been developed to prevent mechanical anchorage loss, but the anchorage loss resulting from physiological factors should also be taken into account. OBJECTIVE: To explore the efficacy of a new strategy to control physiologic anchorage compared with that of the conventional straight-wire appliance. TRIAL DESIGN: Randomized controlled trial (RCT). METHODS: Participants of Han ethnicity were randomized into the physiologic anchorage spee-wire system (PASS) group or McLaughlin-Bennett-Trevisi (MBT™) straight-wire group by minimization random allocation. The eligibility criteria were patients with a Class I or II molar relationship, permanent dentition (11-35 years old), fixed appliances involving the extraction of at least two upper first premolars, and medium or maximum anchorage requirements. Pre-treatment and post-treatment dental casts were scanned into digital casts and measured using a blinded method. Mesial displacements of the upper first molars were considered as the primary outcome for evaluating anchorage control. Measurements were taken for subgroups based on age. RESULTS: Data from 60 participants were analysed. The baseline characteristics were not significantly different between groups. Mesial displacement of the upper first molar (in mm) was 2.96 ± 1.52 in the PASS group and 2.70 ± 1.66 in the MBT group (P = 0.521). The variation in incisor torque was -6.94 ± 6.35 degree in the PASS group and -11.76 ± 7.65 degree in the MBT group (P = 0. 010). The incisor retraction (in mm) was 4.24 ± 1.99 and 5.67 ± 2.27 in the PASS and MBT groups, respectively (P = 0.012). Adverse effects were not documented in any patient. LIMITATION: The study was a single-centre study. CONCLUSIONS: Compared with the MBT group, the PASS group without additional anchorage devices could attain well anchorage control by considering the dentoalveolar compensation of anchor teeth. REGISTRATION: This RCT was registered at the Chinese Clinical Trial Registry (Chictr.org.cn) ChiCTR-TRC-13003260.

[Purification and component identification of total proanthocyanidins in Choerospondias axillaris pericarp].

The present study determined the quantitative markers of total proanthocyanidins in the purification of the industrial waste Choerospondias axillaris pericarp based on the comparison results of high-performance liquid chromatography(HPLC) and mass spectrometry(MS) and optimized the purification process with two stable procyanidins as markers. The adsorption and desorption of five different macroporous adsorption resins, the static adsorption kinetics curve of NKA-Ⅱ resin, the maximum sample load, and the gradient elution were investigated. The UPLC-Q-TOF-MS/MS was employed for qualitative analysis of the newly-prepared total proanthocyanidins of C. axillaris pericarp. As revealed by the results, NKA-Ⅱ resin displayed strong adsorption and desorption toward total proanthocyanidins. The sample solution(50 mg·mL~(-1)) was prepared from 70% ethanol crude extract of C. axillaris pericarp dissolved in water and 7-fold BV of the sample solution was loaded, followed by static adsorption for 12 h. After 8-fold BV of distilled water and 6-fold BV of 10% ethanol were employed to remove impurities, the solution was eluted with 8-fold BV of 50% ethanol, concentrated, and dried under reduced pressure, and purified total proanthocyanidin powder was therefore obtained. Measured by vanillin-hydrochloric acid method, the purity and transfer rate of total proanthocyanidins were 47.67% and 59.92%, respectively, indicating the feasibi-lity of the optimized process. UPLC-Q-TOF-MS/MS qualitative analysis identified 16 procyanidins in C. axillaris total proanthocyanidins. The optimized purification process is simple in operation and accurate in component identification, and it can be applied to the process investigation of a class of components that are difficult to be separated and purified. It can also provide technical support and research ideas for the comprehensive utilization of industrial waste.

Influence of Chemical and Physical Change of Pollen Microgels on Swelling/De-Swelling Behavior.

Pollen, the male microgametophyte of seed plants, is commonly used as a food and health supplement. Here, a facile method to transform sunflower pollen into pH-responsive microgels with tailored properties is presented. The structure and morphology of the pollen microgel are characterized by scanning electron microscopy, confocal laser scanning microscopy, and dynamic image particle analysis based on potassium hydroxide treatment with various incubation time and concentration. These pollen microgels exhibit significant volume change under different pH conditions and Ca+ /ethylenediaminetetraacetic acid treatment. The results describe the fundamental properties of pollen microgels and pave the way for its future applications, such as "smart" drug carriers.

Vertical bone augmentation with simultaneous implantation using deproteinized bovine bone block functionalized with a slow delivery of BMP-2.

OBJECTIVE: We hypothesized that a biomimetic calcium phosphate (CaP) coating which incorporates morphogenetic protein 2 (BMP-2) on the deproteinized bovine bone (DBB) blocks could be used to enhance the vertical alveolar ridge augmentation for the one-stage onlay surgery with simultaneous implants insertion. We aimed to test this hypothesis in vivo. MATERIAL AND METHODS: Beagles dogs were used for the study (n = 6 specimens per group). One month after building the edentulous animal model, 4 mm vertical alveolar bone loss were surgically created and four groups of blocks (W × L × H: 7 mm × 10 mm × 4 mm) were randomly fixed onto the reduced alveolar ridge by implants: (a) DBB blocks alone (negative control group); (b) DBB blocks with superficial adsorption of 50 µg BMP-2 (ad.BMP-2 group); (c) DBB blocks coated by biomimetic CaP coating which incorporates 50 µg BMP-2 (inc.BMP-2 group); and (d) autologous bone blocks (positive control group). After 3 months of healing, samples were harvested for micro-CT and histomorphometric analyses. RESULTS: In histomorphometry, the inc.BMP-2 group showed a significantly thicker (coronal-apically) and wider (buccal-lingually) augmented bone area, better bone-to-implant contact than the negative control group. In both the micro-CT and histomorphometry, the inc.BMP-2 group showed more mineralized tissue than the negative control group and the inc.BMP-2 group also showed significantly more newly formed bone and residual grafts than the negative control group in the upper half of the blocks. In micro-CT, the inc.BMP-2 group showed significantly more bone-to-graft contact percentage than the ad.BMP-2 group. In both micro-CT and histomorphometry, the inc.BMP-2 group showed significantly more percentage of mineralized tissue than the ad.BMP-2 group. No significant differences were found between the inc.BMP-2 group and the positive control group either in micro-CT or in histomorphometry. CONCLUSIONS: The DBB blocks with coating-delivered BMP-2 significantly enhanced the efficacy of vertical alveolar bone augmentation, compared with the unloaded blocks and blocks with adsorbed BMP-2, in the one-stage onlay surgery with simultaneous implant insertion.

Nonvascularized Iliac Bone Reconstruction for the Mandible Without Maxillofacial Skin Scarring.

PURPOSE: There are many methods to reconstruct the mandible, but they are often accompanied by trauma, which can lead to scarring of the maxillofacial skin. The purpose of this study was to show the utility of a minimally invasive method for reconstruction of the mandible with nonvascularized iliac bone grafts without a skin scar, as well as to evaluate the success rate and complications. PATIENTS AND METHODS: This was a retrospective case series. We retrospectively analyzed patients who underwent transoral resection of benign mandibular pathologies, followed by nonvascularized iliac bone graft reconstruction. The primary outcome variable was the success rate of the bone grafts. Secondary outcome variables were postoperative complications at the grafted bone recipient and donor sites, the long-term absorptivity of grafted bone, and the type of mandibular defect. We computed descriptive statistics or performed the χ2 test for each variable. RESULTS: Overall, 54 patients were included in the study, including 21 male and 33 female patients, with an age range of 10 to 65 years. The complete survival rate was 87.0% (47 of 54 patients), and the partial survival rate was 98.1% (53 of 54). The average bone absorption rate 3 years after surgery was 1.8 to 30.7%. We propose a new classification method for mandibular defects based on the extent of the tumor, location of the osteotomy, and degree of surgical difficulty. CONCLUSIONS: Intraoral nonvascularized iliac bone grafting is a highly successful minimally invasive method for mandibular reconstruction. It is also one of the best methods for mandibular reconstruction in patients with benign mandibular tumors without soft tissue involvement.

Periodontal regeneration using bone morphogenetic protein 2 incorporated biomimetic calcium phosphate in conjunction with barrier membrane: A pre-clinical study in dogs.

AIM: To evaluate the effect of bone morphogenetic protein 2 (BMP-2) incorporated biomimetic calcium phosphate (BMP-2/BioCaP) in conjunction with barrier membrane on periodontal regeneration in chronic periodontitis experimental model. MATERIAL AND METHODS: Chronic periodontitis experimental model with critical-sized supra-alveolar defects was created in 15 dogs' mandibles. After the initial periodontal therapy, the defects were randomly assigned to the following groups: (a) control; (b) barrier membrane; (c) deproteinized bovine bone mineral + barrier membrane; (d) BioCaP + barrier membrane and (e) BMP-2/BioCaP + barrier membrane (6 quadrants with 18 teeth per group). Eight weeks later, clinical examinations, micro-CT, and histomorphometric analyses were performed. RESULTS: Clinical examinations, including plaque index, bleeding index, and probing depth, were similar for all groups. In contrast, the clinical attachment loss was significantly lower in defects grafted with BMP-2/BioCaP and barrier membrane. The micro-CT results showed that the height of mineralized tissue in defects grafted with BMP-2/BioCaP and barrier membrane was significantly higher. For histometric analysis, the defects grafted with BMP-2/BioCaP and barrier membrane exhibited significantly more connective tissue height, new cementum height, new bone height and area, as well as less down-growth of junctional epithelium. CONCLUSION: BMP-2/BioCaP could be a promising bone substitute for periodontal regeneration.

Preclinical application of recombinant human bone morphogenetic protein 2 on bone substitutes for vertical bone augmentation: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Recombinant human bone morphogenetic protein 2 (rhBMP-2) has been introduced to clinical practice because of its osteoinductive capacity. However, the evidence of its efficacy in vertical bone augmentation procedures is not clear. PURPOSE: The purpose of this systematic review and meta-analysis was to investigate the efficacy of rhBMP-2 in vertical bone augmentation and to establish whether its addition in preclinical experiments (animal studies) would be sufficient to justify further clinical and histometric studies. MATERIAL AND METHODS: An electronic search of 3 databases, PubMed/MEDLINE, EMBASE, and Web of Science, and a manual search of the reference list of relevant studies were performed. Only randomized controlled trials regarding animal studies comparing the efficacy of bone grafts supplemented with and without rhBMP-2 in vertical bone augmentation procedures were included and reviewed. RESULTS: Nine studies were included. The results of the meta-analysis showed that the pooled weighted mean difference (WMD) of the percentage of newly formed bone was 9.97% (95% confidence interval [CI]=-0.79% to 20.72%; P=.070), the WMD of the percentage of residual materials was -21.31% (95% CI=-70.62% to 28.00%; P=.400), the WMD of the augmented bone height was 1.70 mm (95% CI=-0.23 to 3.63 mm; P=.080), the WMD of the augmented bone height for studies with space-providing barriers was 1.00 mm (95% CI=0.43 to 1.57 mm; P<.001), and the WMD of the percentage of regenerated tissue was 17.07% (95% CI=8.52% to 25.62%; P<.001). CONCLUSIONS: The application of rhBMP-2 in bone substitutes did not enhance new bone formation and residual graft resorption in vertical bone augmentation procedures. Tissue regeneration and the augmented bone height were significantly improved by the additional use of BMP-2.

Development of a reverse transcription recombinase-aided amplification assay for the detection of coxsackievirus A10 and coxsackievirus A6 RNA.

Hand, foot and mouth disease (HFMD) is a serious public health problem, and coxsackievirus A6 (CVA6) and coxsackievirus A10 (CVA10) are two of the major causative pathogens, in addition to enterovirus 71 (EV71) and coxsackievirus A16 (CVA16). A simple and rapid reverse transcription recombinase-aided amplification assay (RT-RAA) was developed for the detection of CVA10 and CVA6 in this study. The analytical sensitivity for detection of CVA10 and CVA6 at 95% probability by probit regression analysis was 35 copies per reaction and 38 copies per reaction, respectively, with 100% specificity. Compared with commercial RT-qPCR assays, when testing 455 fecal specimens, the kappa value of the RT-RAA assay for CVA10 and CVA6 was 0.920 (p < 0.001) and 0.952 (p < 0.001), respectively. Moreover, four samples that were positive for CVA10 and five that were positive for CVA6 by RT-RAA but negative by RT-qPCR were further determined to be true positives. These results demonstrate that the proposed RT-RAA assays are very valuable tools for the detection of CVA10 and CVA6 and have potential for use in resource-limited settings.

Application of Y-shaped, coated self-expandable metallic stents for anastomotic stenosis after gastrojejunostomy (Billroth II).

BACKGROUND: Anastomotic stenosis is an infrequent but life-threatening complication after gastrojejunostomy (Billroth II). Tubular or single tubular stents have limited efficacy due to the particular anatomy. PURPOSE: To assess the feasibility of a Y-shaped, fully-coated, self-expandable, metallic stent (SEMS) for anastomotic stenosis after gastrojejunostomy (Billroth II). MATERIAL AND METHODS: Between January 2008 and August 2014, 14 patients (10 with gastric carcinoma and four with duodenal ulcers) had anastomotic stenoses following Billroth II reconstructions. Eight patients with gastric cancer had tumor recurrence near the anastomosis; two had benign strictures. The four duodenal ulcer patients had benign stenoses. An integrated Y-shaped, fully coated SEMS was designed to accord with the anatomy of residual gastrojejunal anastomotic strictures. Fourteen stents were inserted under fluoroscopic control. Follow-up was at 1, 3, 9, and 12 months, and then annually. RESULTS: All 14 stents were inserted successfully at the first attempt with a technical success rate of 100%. After stenting, abdominal symptoms resolved in all patients. All patients were followed up for 4-27 months (mean, 13.9 months). One of the eight recurrent cases died of multiple tumor metastases and liver failure after 7 months, without obstruction symptoms. In all six patients with benign anastomotic stenosis, the stents were removed successfully without complication and with no evidence of restenosis based on clinical evaluation and imaging. CONCLUSION: A Y-shaped, fully-coated SEMS proved to be a feasible and minimally invasive procedure for treating anastomotic stenosis after gastrojejunostomy (Billroth II).

Distalization of the maxillary and mandibular dentitions with miniscrew anchorage in a patient with moderate Class I bimaxillary dentoalveolar protrusion.

This case report describes the treatment of a 25-year-old woman with a skeletal Class I pattern and moderate bimaxillary dentoalveolar protrusion. The orthodontic treatment included distal movement of her maxillary and mandibular dentitions using 1-stage miniscrews. The total active treatment time was about 12 months. Her tooth alignment and profile were significantly improved by the orthodontic treatment. The 2-year posttreatment records show a stable occlusion and satisfactory facial esthetics.

The host HLA-A*02 allele is associated with the response to pegylated interferon and ribavirin in patients with chronic hepatitis C virus infection.

Human leukocyte antigen (HLA) alleles are associated with both the progression of chronic hepatitis C (CHC) and the sustained virological response (SVR) to antiviral therapy. HLA-A*02 is the most common HLA allele in people of European/Caucasian descent and the Chinese and Japanese population. Therefore, we investigated whether HLA-A*02 expression is associated with disease outcome in Chinese CHC patients. Three hundred thirty-one treatment-naïve CHC patients were recruited in this study. The expression of HLA-A*02 was tested by FACS and LABType SSO assays. All patients were treated weekly with pegylated interferon plus ribavirin (PEG-IFN/RBV) according to a standard protocol. Virological response was assessed by TaqMan assay at the 4th, 12th, 24th, and 48th week of therapy, and again at the 24th week post-therapy. By the end of the study, 293 CHC patients, including 144 HLA-A*02-positive patients and 149 HLA-A*02-negative patients, were evaluable for analysis. There were no statistical differences in clinicopathological parameters between HLA-A*02-positive and negative patients before antiviral therapy (P > 0.05). The HLA-A*02-positive patients had a higher rapid virological response (RVR, 74.3 % versus 62.4 %, P = 0.03) and SVR (78.5 % versus 64.4 %, P = 0.01) and a lower relapse rate (4.2 % versus 11.9 %, P = 0.03) than HLA-A*02-negative patients. Multivariable logistic regression analysis showed that HLA-A*02 expression, liver fibrosis stages

A Big Prospect for Hydrogel Nano-System in Glioma.

Patients diagnosed with glioma typically face a limited life expectancy (around 15 months on average), a bleak prognosis, and a high likelihood of recurrence. As such, glioma is recognized as a significant form of malignancy. Presently, the treatment options for glioma include traditional approaches such as surgery, chemotherapy, and radiotherapy. Regrettably, the efficacy of these treatments has been less than optimal. Nevertheless, a promising development in glioma treatment lies in the use of hydrogel nano-systems as sophisticated delivery systems. These nano-systems have demonstrated exceptional therapeutic effects in the treatment of glioma by various responsive ways, including temperature-response, pH-response, liposome-response, ROS-response, light-response, and enzyme-response. This study seeks to provide a comprehensive summary of both the therapeutic application of hydrogel nano-systems in managing glioma and the underlying immune action mechanisms.

Fabrication and characterization of succinylated and glycosylated soy protein isolate and its self-assembled nanogel.

In this study, we used succinic anhydride (SA) acylation and dextran (DX) glycosylation modified soybean isolate protein (SPI) to develop self-assembled SPI-SA-DX adduct-based nanogels. Degree of modification, SDS-PAGE, and FT-IR studies showed that the amino group of the SPI was replaced by hydrophilic dextran and succinic acid carboxyl groups. Dextran chain and anhydride group attachment to the soybean protein surface enhanced hydrophilicity and spatial site blocking. Modification-induced protein structure unfolding, free sulfhydryl groups to be converted to disulfide bonds, and reduced surface hydrophobicity (H0). H0 was lowest at 33,750 ± 1008.29 when SA content = 10 % protein content (SPI-SA3-DX). The nanometer gel based on SPI-SA3-DX had the maximum turbidity and clear transparent solution without precipitation. Its particle size and polymer dispersibility index (PDI) were also the smallest, with values of (106.87 ± 4.51) nm and 0.21 ± 0.009, respectively. Transmission electron microscopy showed that nanogels had subspherical shell-core structures. Nanogels were stable under different pH, ionic strength, high temperature, and storage conditions.

Clostridium beijerinckii mutant with high inhibitor tolerance obtained by low-energy ion implantation.

Clostridium beijerinckii mutant strain IB4, which has a high level of inhibitor tolerance, was screened by low-energy ion implantation and used for butanol fermentation from a non-detoxified hemicellulosic hydrolysate of corn fiber treated with dilute sulfuric acid (SAHHC). Evaluation of toxicity showed C. beijerinckii IB4 had a higher level of tolerance than parent strain C. beijerinckii NCIMB 8052 for five out of six phenolic compounds tested (the exception was vanillin). Using glucose as carbon source, C. beijerinckii IB4 produced 9.1 g l(-1) of butanol with an acetone/butanol/ethanol (ABE) yield of 0.41 g g(-1). When non-detoxified SAHHC was used as carbon source, C. beijerinckii NCIMB 8052 grew well but ABE production was inhibited. By contrast, C. beijerinckii IB4 produced 9.5 g l(-1) of ABE with a yield of 0.34 g g(-1), including 2.2 g l(-1) acetone, 6.8 g l(-1) butanol, and 0.5 g l(-1) ethanol. The remarkable fermentation and inhibitor tolerance of C. beijerinckii IB4 appears promising for ABE production from lignocellulosic materials.