Associations of sex, age, and number of remaining teeth with performance on oral hypofunction tests.

INTRODUCTION: Oral hypofunction comprises seven aspects of oral condition, including oral hygiene, oral dryness, bite strength, tongue-lip motor function, tongue pressure, masticatory function, and swallowing function. Each of these seven has a single diagnostic criterion; however, the use of a single indicator without consideration of sex, age, or other factors is controversial. The purpose of this study was to evaluate the association between the oral hypofunction test and sex, age, and number of remaining teeth. METHODS: The study was conducted at 12 facilities by the members of the Japanese Society of Geriatric Dentistry during April to December 2019. The participants comprised 181 healthy older adults aged 65 years and over (56.9% female; age range 65-95 years) who regularly visited these facilities. All tests of oral function and oral status available in Japan were performed on the participants, and the association between these tests and sex, age, and number of remaining teeth was examined. RESULTS: Sex differences were observed in masticatory function, bite force, lip closure force, jaw-opening force, oral diadochokinesis "ka," and tongue coating index (p < .05). In men, age was weakly (r = 0.20-0.40) associated with masticatory function, jaw-opening force, maximum tongue pressure, oral diadochokinesis, and swallowing function. In women, the number of remaining teeth, masticatory function, jaw-opening force, and oral diadochokinesis "ta" and "ka" was also weakly associated with age. CONCLUSIONS: Performance on the oral hypofunction test differs by sex, age, and number of remaining teeth. This means that the current single criterion for evaluation requires caution in its interpretation.

Cyclic Fatigue Properties of Titanium Alloys for Application in Dental Implants.

The present study investigated the cyclic fatigue properties of titanium alloys (Ti-6Al-4V and Ti-6Al-7Nb) as implant materials and compared their properties with those of commercially pure titanium. Ti-6Al-4V and Ti-6Al-7Nb cylinders with diameters of 3.0 mm were examined. The surfaces of the cylinders were roughened by sand blasting with alumina particles and acid etching. Static and cyclic tests were performed according to ISO 14801:2016. The yield force in the static test (YS) was measured in 5 specimens of each alloy using a universal testing machine. The yield force in a cyclic test (YC) was measured in 20 specimens of each alloy using the staircase method, which involved applying a cyclic load at a frequency of 10 Hz for 106 cycles. After the cyclic loading tests, cross-sections of the specimens were examined under an optical microscope. The YS values for Ti-6Al-4V and Ti-6Al-7Nb were 1463 N±93 N and 1405 N±79 N, respectively, and the YC values were 870 N±58 N and 853 N±202 N, respectively. Microscopic observation revealed cracks on the tensile side of some of the specimens, including run outs and failures. The results of this study suggest that the YC values for Ti-6Al-4V and Ti-6Al-7Nb were 40% less than those for YS. The yield force of Grade-4 Cp-Ti significantly decreased after cyclic loading. The YC values for Ti-6Al-4V and Ti-6Al-7Nb were approximately 900 N, which was markedly greater than that for commercially pure, Grade-4 titanium (700 N).

Maxillary Obturator Prosthesis Made with Polyetherketoneketone Using Optical Impression and CAD/CAM System.

This report describes the case of a 68-year-old man who visited our department complaining of poor denture retention and difficulty masticating due to damage to the retainer of a maxillary obturator. The patient had never been satisfied with the fit of this prosthesis, which had been placed two years earlier. The obturator and the mucosal surface of the denture base were incompatible, which had caused the retainer to detach. The maxillary defect was categorized as H3S0D0T0 according to the HS classification. The diagnosis was a masticatory disorder due to a damaged retainer and an incompatible denture base. Optical impressions and occlusal records were taken and a maxillary obturator fabricated using a CAD/CAM system. Dental CAD software was used to design and complete the tooth arrangement. The CAM system was used to mill a polyetherketoneketone disc based on the obtained data and composite resin used to face the teeth and gingiva. The maxillary obturator was placed after only three visits, spanning from impression taking to denture completion. The use of digital data allowed the time to denture completion to be shortened in addition to the number of hospital visits to be reduced. Compared to conventional impression taking, optical impressions also prevent discomfort, decreasing stress for the patient.

Oral Function for Diagnosing Oral Hypofunction in Healthy Young Adults: A Comparison with the Literature.

This study investigated decline in oral function in healthy young adults and compared it with that observed in an earlier studies employing older adults. The participants comprised 130 young healthy adults (mean age 24.1±2.9 yr), all with complete dentition. All participants underwent the oral hypofunction test established by the Japanese Society of Gerodontology, which evaluates oral hygiene, oral dryness, occlusal force, tongue-lip motor function (oral diadochokinetic rate; ODK), tongue pressure, and masticatory and swallowing function. The average value for and rate of hypofunction of each parameter were calculated. In healthy young adults, the scores were 28.9±17.1% for oral hygiene; 28.8±2.2 for oral dryness; 959.9±499.8 N for occlusal force; 7.0±0.8 times/sec for ODK /pa/, 7.6±0.8 times/sec for /ta/, and 6.9±0.9 times/sec for /ka/; 41.8±8.4 kPa for tongue pressure; 249.8±94.1 mg/dl for masticatory function; and 0.2±0.7 for swallowing function. No sign or symptom of change in oral function was observed at a high rate in young adults. Occlusal force, tongue-lip motor function, and tongue pressure showed a large difference in the rate of hypofunction between younger and older adults, however.

Effect of Professional Denture Cleaning on Surface Roughness of Silicone or Acrylic Soft Relining Materials.

The aim of this study was to investigate the effects of combining mechanical (ultrasonic) and chemical cleaning (using denture cleaners) on the surface roughness of silicone or acrylic soft relining materials. The silicone soft relining material with the lowest Shore A hardness and a acrylic soft relining material routinely used in Japan were selected. Four groups were established based on type of treatment: immersion in water (W); ultrasonic cleaning in tap water (U); ultrasonic cleaning in a hypochlorous acid denture cleanser (HU); or ultrasonic cleaning in an acidic denture cleanser (AU). Following the tests, surface roughness was determined as the arithmetic mean height of the surface (Sa) and maximum height (Sz). Data were analyzed using the Kruskal-Wallis test followed by Bonferroni correction for a multiple comparison. No significant difference was observed in the Sa or Sz of the silicone soft relining material between the 4 groups. Significant differences were observed in the Sa of the acrylic soft relining material between Groups W and HU (p=0.008) and between Groups W and AU (p=0.008), but no significant differences in the Sz among the 4 groups. Combining U with AU or U with HU yielded no increase in the surface roughness of the silicon soft relining material. The surface roughness of the acrylic soft relining material showed an increase, however, with the combination treatments used.

Influence of Chewing Gummy Jelly Containing Aroma Compound on Psychological Stress and Autonomic Nervous System Activity: A Randomized Crossover Trial.

The aim of this randomized crossover trial was to clarify the effects of chewing gummy jelly containing a compound of decanoic acid, oligonol, methyl cellulose, and citral (DOMAC) on mental stress and autonomic nervous activity in facemask wearers. A placebo gummy jelly was used in conjunction with DOMAC. Eight healthy adults with no tooth loss (mean age: 35±5 yr) were included. The participants were required to chew one DOMAC or placebo gummy jelly for 5 min after wearing a facemask for 20 min in the laboratory, then the other gummy jelly after a washout period. Rate of change in salivary immunoglobulin A (IgA) as a marker of stress was compared between before and after chewing. Additionally, sympathetic and parasympathetic activity was compared at both time points. A significant difference was observed in the percentage change in salivary IgA from that at before wearing a facemask: 127±34% (mean±standard deviation) while wearing a facemask; 46±20% while chewing DOMAC gummies; and 47±26% while chewing placebo gummies (p<0.05). Parasympathetic nervous system activity was 971.2±1040.7 ms2 at 20 min after facemask wearing; 295.0±253.0 ms2 after DOMAC gummy chewing; and 1956.1±2798.0 ms2 after chewing a placebo gummy jelly; with significant differences only being found between 20 min after facemask wearing and after DOMAC gummy chewing (p<0.05). Sympathetic nervous system activity was 1.80±1.83 at 20 min after facemask wearing; 4.06±3.33 after DOMAC gummy chewing; and 4.95±7.02 after chewing a placebo gummy jelly; with significant differences only being found between 20 min after facemask wearing and after DOMAC gummy chewing. These results suggest that chewing gummy jellies containing DOMAC relieves stress caused by facemask wearing and activates sympathetic nervous system activity.

Relationship between two pressure-sensitive films for testing reduced occlusal force in diagnostic criteria for oral hypofunction.

OBJECTIVE: To measure the occlusal force in the same group of patients with the Dental Prescale 50H type R and the Dental Prescale II, examine the association between them, and determine the reference value for Dental Prescale II that corresponds to the 50H type R 200 N reference value used to make a diagnosis of oral hypofunction. BACKGROUND: Reduced occlusal force, a measure of frailty in older persons, was previously determined with Prescale 50H type R pressure-sensitive film, but it has been replaced by the Prescale II. MATERIALS AND METHODS: The study participants were 441 men and women aged ≥ 65 (mean, 71.8 ± 5.3) years. The occlusal force was measured with the two different types of pressure-sensitive film, and their association was examined. Receiver operating characteristic curves for the Prescale II measured values were created with the 200 N reference value used for the 50H type R film as the cut-off value. RESULTS: The analysis set included 391 participants for whom measurements were obtained using both the 50H type R and the Prescale II. Linear regression analysis produced regression equations, and a ROC curve analysis provided reference values of 500 N for the Prescale II (without pressure filter) and 350 N for the Prescale II (with pressure filter). CONCLUSION: In occlusal force tests for making a diagnosis of oral hypofunction, reference values for the Prescale II (without pressure filter) and for the Prescale II (with pressure filter) were determined. The findings suggested that the Prescale II can be used as a diagnostic examination for oral hypofunction.

Oral function and nutritional status in non-acute hospitalised elders.

INTRODUCTION: Malnutrition and risk of malnutrition continues to be a common finding in elders, yet its association with oral function in hospitalised patients remains unclear. MATERIAL AND METHODS: Patients aged 70 years or over who had been hospitalised for non-acute rehabilitation were recruited. Nutritional risk was screened using the Mini-Nutritional Assessment Short Form (MNA-SF) and Nutritional Risk Screening (NRS) scores. Malnutrition was assessed according to the Global Leadership Initiative on Malnutrition (GLIM) criteria. All participants underwent the oral hypofunction test battery, evaluating oral hygiene, oral dryness, occlusal force, tongue-lip motor function, tongue pressure, masticatory and swallowing function. Statistical analyses comprised Mann-Whitney or Kruskal-Wallis tests. Bivariate associations between categorical variables were tested using the Pearson chi-square test; for continuous variables, the Spearman correlation was calculated. A P-value < .05 was considered statistically significant. RESULTS: Sixty patients aged a mean 82.5 ± 7.0 years participated. Some 88.3% were diagnosed with oral hypofunction, and this was more common in older patients (P = .020). Analysing the 7 oral hypofunction tests as an interval variable (NiOF) revealed additional correlations with number of teeth (ρ = 0.477) as well as the nutritional risk, evaluated by the MNA-SF (ρ = -0.284) and NRS (ρ = 0.317) scores. NiOF scores were higher among denture wearers (P = .003). GLIM did not confirm the correlation with NiOF. Biomarkers such as serum albumin and CRP were not associated with the NiOF score. CONCLUSION: In this sample, the association between oral function and nutritional state is more obvious in nutritional risk scores than in the malnutrition diagnosis by GLIM.

Consideration of mouth opening when using positioning stents during radiotherapy for tongue cancer: a retrospective study.

Background: The aim was to clarify the range of mouth opening required to minimize the development of oral mucositis on the palate while using a positioning stent during radiotherapy in patients with tongue cancer. A positioning stent is used to reduce the severity of oral mucositis; however, requirements for fabricating the device have not been standardized. In particular, the range of mouth opening required while using a stent to prevent radiation-induced oral mucositis has not been determined. Materials and methods: We retrospectively analyzed medical records and computed tomography (CT) images of nine patients who had undergone radiotherapy for tongue cancer. Irradiation dose for the palate and range of mouth opening while using the positioning stent was calculated from CT images and the radiotherapy treatment planning program. Results: The irradiation dose presented as medians and interquartile range (IQR) for the palate was 1.6 (IQR: 1.1-2.2) Gy with the use of the positioning stent and 37.2 (IQR: 17.5-44.1) Gy without the use of the positioning stent. The range of mouth opening was 19-37 [mean ± standard deviation (SD): 26 ± 5.6] mm, and it correlated with the attenuation amount of irradiation dose to the palate (r = 0.673, p = 0.0467). Regression equation was y = 0.21x + 19. Conclusions: Our study may be useful for deriving the relationship between the attenuation amount of irradiation of the palate with the positioning stent and the amount of mouth opening required for this attenuation.

Effect of Lip-seal Resistance Training on Lip-seal Strength in Young Adults.

Lip-seal strength is important for articulating bilabials, capturing food during eating, maintaining fluid within the oral cavity before swallowing, and achieving swallowing pressure. The objective of this study was to investigate the effect of lip-seal resistance training on lip-seal strength in young adults. The participants comprised 15 young healthy adults aged 26-34 years, all with complete dentition. Each was required to perform lip-seal resistance training 5 weekdays a week for 4 weeks with a commercially available instrument for that purpose. The instrument was placed on the midline, left corner, and right corner of the mouth, and pulled forward, leftward, and rightward, respectively. The participants were required to pull the training instrument forcefully while resisting by closing the lips together as strongly as possible until the instrument exited the lips. Lip-seal strength was measured at before and after training using a measurement device. Change in lip-seal strength between before and after training was analyzed using the Wilcoxon signed rank test. The mean lip-seal strength was 8.9±1.5 N before training and 10.4±1.8 N after. A significant difference was observed in lip-seal strength between before and after training (p=0.003), and the mean increase during the training period was 18.1±17.6%. The results showed that lip-seal resistance training for 4 weeks increased lip-seal strength in young adults. These findings suggest that training that involves pulling not only in a forward direction, but also in bilateral directions strongly stimulates the orbicularis oris muscle, resulting in an increase in lip-seal strength.

Intra- and inter-investigator reliabilities of oral moisture measured using an oral moisture-checking device.

BACKGROUND: Oral mucosal moisture determined using oral moisture-checking devices is used as a mouth dryness evaluation method. Such devices are capable of evaluating the state of mouth dryness in a simple manner and have applicability in a wide range of subjects; however, their intra- and inter-investigator reliabilities have not yet been clarified. OBJECTIVE: This study aims to investigate the intra- and inter-investigator reliabilities of measuring oral moisture using an oral moisture-checking device for a wide range of age groups. METHODS: Intra- and inter-investigator reliabilities were investigated in 28 young subjects and 19 older subjects aged ≥65 years. Three trained investigators independently measured oral mucosal moisture values using an oral moisture-checking device. Intra-investigator reliability was assessed using the coefficient of variation (CV) and intraclass correlation coefficient (ICC) (1.1), and inter-investigator reliability was assessed using ICC (2.1). RESULTS: Mean CV was 0.015 and 0.016, mean ICC (1.1) was 0.806 and 0.877, and ICC (2.1) was 0.873 and 0.829 in the young and older subjects, respectively. CONCLUSION: In young subjects, the mean values of ICC (1.1) and ICC (2.1) of the oral moisture-checking device were 0.806 and 0.873, respectively, whereas in older subjects, these values were 0.877 and 0.829, respectively. Thus, this confirms that the examination of oral mucosal moisture using the oral moisture-checking device has sufficient intra- and inter-investigator reliabilities for a wide range of age groups.

Retention force and allowable range of the angle of an implant-supported overdenture attachment system using healing screws and a silicone resilient denture liner.

STATEMENT OF PROBLEM: Changes in the intraoral condition immediately after implant placement and in patients using fixed prosthetic appliances with implant abutments cause problems that require the use of an easily adjustable implant-supported overdenture system. PURPOSE: The purpose of this in vitro study was to develop a simulated implant-supported overdenture attachment system by using healing screws for the patrix and a silicone resilient denture liner for the matrix and to investigate the initial retention force, time-course changes, and allowable range of the angle between attachments. MATERIAL AND METHODS: Tests on the retention force and allowable range of the angle were performed. Attachments using tissue-level healing screws (height: 2.0 and 3.0 mm) for the patrix and a silicone resilient denture liner for the matrix were prepared. In the retention force measurement test, the frequency of insertion and removal was set at 3 per day to simulate a 4-month relief period. The joined attachment model was pulled apart, and the maximum traction (N) required to remove it was defined as the retention force. The retention force was measured every 90 times (representing the number of insertions and removals per month). To test the allowable angle range, 2 patrices were used. The angle between the 2 patrices was set at 0, 10, 20, and 30 degrees, and the angular limit for joining with the matrix was measured. The initial retention force of the healing screw attachments was compared with that of a polymeric O-ring by using 1-way layout ANOVA followed by the Bonferroni test (α=.05). To analyze time-course changes in the 2 types of healing screw attachments, the retention force before insertion and removal was compared with that after repeated insertions and removals for each simulated period using 1-way layout ANOVA followed by the Dunnett test (α=.05). RESULTS: The initial retention force of the 2.0- and 3.0-mm healing screws was 2.4 ±0.1 and 2.6 ±0.2 N. After repeating insertions and removals to simulate use for 4 months, the retention force of the 2.0- and 3.0-mm healing screws was 1.8 ±0.2 and 2.2 ±0.1 N, respectively, both showing significant differences from the initial retention force (P<.05). The allowable angle range test revealed that insertion and removal of the healing screws was possible up to 30 degrees. CONCLUSIONS: Under the conditions of this in vitro study, repeated insertion and removal attenuated the retention force but was still equivalent to the retention force of the O-ring. The allowable range of the angle between patrices for insertion and removal was up to 30 degrees.

Rate of oral frailty and oral hypofunction in rural community-dwelling older Japanese individuals.

OBJECTIVE: To clarify the rate of oral frailty and oral hypofunction in rural community-dwelling older adults in Japan. BACKGROUND: Recently, the oral function of Japanese older adults has been evaluated multilaterally based on two concepts: oral frailty and oral hypofunction. Oral frailty is defined as a decrease in the oral function accompanied by a decrease in mental and physical functions. Oral hypofunction is a disease where the oral function is comprehensively decreased. However, their rates have not yet been elucidated. MATERIALS AND METHODS: Oral frailty and oral hypofunction were evaluated in 679 older adults from rural areas. To investigate the differences in occurrence rates due to the evaluation methods, one of the subordinate symptoms of oral hypofunction, the reduced occlusal force, was evaluated based on both the occlusal force (main method) and the number of teeth (alternative method). RESULTS: The rate of oral frailty was 22.3% in men and 22.7% in women. The rate of oral hypofunction was 39.0% in men and 46.9% in women. The overall rate of oral hypofunction was 43.6% when the reduced occlusal force of oral hypofunction was evaluated using the main method and 46.4% when evaluated using the alternative method. The proportion of participants with decreased occlusal force, the number of present teeth, oral diadochokinesis, tongue pressure and masticatory performance increased with age in both men and women. CONCLUSION: Among rural community-dwelling older adults, the rate of oral frailty was 22.5% and that of oral hypofunction was 43.6%.

Differences in Elderly and Non-Elderly Outpatient Subjective Evaluation of "Easy-to-Eat Meals" after Dental Treatment.

Dental treatment improves the experience of eating by healing illnesses in the oral cavity or through the installation of special devices. However, mastication can often prove difficult for short periods of time after dental treatment, potentially limiting the types of food that can be consumed. Therefore, we proposed a highly nutritious meal strategy for dental outpatients (hereafter, "easy-to-eat meals"). We previously reported patients' subjective assessment of these easy-to-eat meals as determined through a questionnaire survey. The purpose of the present study was to investigate how differences in age affected such assessments. The study participants comprised patients scheduled to undergo dental treatment. They were divided into 2 groups: one of patients aged above and one of those aged below 70 years. All were required to consume provided easy-to-eat meals at the dental hospital directly after treatment and then answer a questionnaire. The questionnaire included items on patient satisfaction with the meals, taste, portion size, convenience, reduction in discomfort, and whether they would consume them again. The format of the questionnaire was a visual analog scale (VAS), ranging from 0 (negative) to 10 (positive). Portion size was to be rated on a scale from 0 ("Not enough") to 10 ("Too much"), with 5 being "Just right". Correlations between the questionnaire items were investigated to determine how they influenced each other. The VAS average for "Reduction in discomfort" was 8.45±1.39 in the non-elderly group and 6.07±2.92 in the elderly group, and the difference was significant (p=0.02); the VAS average for "Taste" was 6.49±2.32 in the non-elderly group and 4.91±0.98 in the elderly group, and the difference was significant (p=0.04). The results of this study suggest that providing such meal plans as nutritional guidance after dental treatment can influence quality of life in elderly patients.

Morphological Investigation of Residual Ridge in Japanese Edentulous Elderly for Fabrication of Edentulous Stock Tray.

The objective of this study was to determine the size of the residual ridge in edentulous elderly Japanese persons for preparation of edentulous stock trays and clarify any correlations among the items measured. The participants comprised 74 patients requesting construction of a complete denture for the maxilla, mandible, or both. The length, width, and anterior and posterior height of the maxillary and mandibular residual ridge was measured on a prepared working model using a caliper. For each of the maxillary and mandibular edentulous residual ridges, correlations among measurement items were analyzed employing Pearson's correlation coefficient. In participants who were edentulous in both the maxilla and mandible, correlations between the maxillary and mandibular measurement items were analyzed employing Pearson's correlation coefficient. The results revealed that the mean maxillary length of the residual ridge was 55.21±4.07 mm, while mean mandibular length was 56.03±4.04 mm. The mean posterior width of the maxillary jaw was 48.79±4.14 mm, while that of the mandibular jaw was 57.33±3.24 mm. A strong correlation was found between the length and width of the residual ridge in both the maxilla and mandible, but no strong correlation was detected between the height in the anterior tooth region and any other item measured. These findings suggest that the size of any given item can be estimated by measuring either the length or width of the residual ridge when selecting a stock tray. We also propose that it is necessary to prepare stock trays with several different heights in the anterior tooth region, regardless of the length and width of the tray, or to adjust the length of the tray.

"Easy-to-eat Meals" for Outpatients Following Dental Treatment.

Patients often experience temporary difficulty in masticating during the period immediately following dental treatment. The purpose of this study was to investigate subjectively assessed satisfaction with a specially designed diet for such patients by means of a questionnaire. These "easy-to-eat meals" were planned and provided by this hospital in Japan, and comprised a combination of commercially available and nutritionally rich soft foods, jellied foods, drinks, and other items. The patients were required to commence consuming them immediately following dental treatment. The questionnaire contained 6 categories -Satisfaction, Taste, Meal completion, Convenience, Reduction in discomfort, and Likelihood of reuse - to be evaluated on a 10-cm visual analog scale (VAS). The overall response was positive in all 41 completed questionnaires, with an overall score of 6 or higher for every category. Orthodontics achieved the highest VAS score in every category, followed by oral implantology, prosthodontics, and conservative Original Article doi:10.2209/tdcpublication.2018-0055 dentistry. A correlation was observed between Satisfaction and each of the 5 remaining questionnaire categories (Taste: |r|=0.70, p≤0.00; Meal completion: |r|=0.60, p≤0.00; Convenience: |r|=0.56, p≤0.00; Reduction in discomfort: |r|=0.48, p=0.00; and Likelihood of reuse: |r|=0.79, p≤0.00). An acceptable level of convenience was obtained with these meals, as they were reported to be useful during the period immediately following treatment, when eating out or preparing meals was physically and/or psychologically difficult.

Relationship between masticatory function and frailty in community-dwelling Japanese elderly.

BACKGROUND: Frailty likely results in impaired functioning, and frail individuals requiring long-term care have recently attracted the attention of researchers. In the oral health field, the number of elderly individuals who require intervention for retaining occlusion has been increasing, as has the number of remaining teeth and required prosthetic treatment. Additionally, the number of elderly with reduced masticatory function has also been increasing, and frailty is a suspected factor. AIMS: The aim of this study is to clarify the relationship between frailty and masticatory function decline. DESIGN: A cross-sectional study. METHODS: A total of 747 participants (total mean age 73.6 ± 5.8 years old) underwent a comprehensive examination at the Tokyo Metropolitan Institute of Gerontology. Three masticatory functions were evaluated: maximum occlusal force, mixing ability, and self-reported chewing ability. Frailty was determined using all 25 questions of the Basic checklist developed by the Japanese Ministry of Health, Labour and Welfare, following the method reported by Satake et al. RESULTS: Binomial logistic analysis clarified the relationship between frailty and evaluation of each of the three masticatory functions. Significant correlations of pre-frailty or frailty with maximum occlusal force, mixing ability, and subjective chewing ability were observed. CONCLUSION: All three masticatory functions (maximum occlusal force, mixing ability, and self-reported chewing ability) were associated with pre-frailty or frailty in community-dwelling Japanese elderly.

A 2-year longitudinal study of the relationship between masticatory function and progression to frailty or pre-frailty among community-dwelling Japanese aged 65 and older.

BACKGROUND: An association has recently been reported between frailty and reduced masticatory function; however, the causal relationship remains unclear. OBJECTIVE: The aim of this study was to clarify the relationship between masticatory function and frailty progression. METHODS: Among 6699 individuals aged 65 and older (mean age 72.8 ± 5.2 years) who were invited to participate in comprehensive medical check-ups, 418 who underwent examinations at the Tokyo Metropolitan Institute of Gerontology in both 2013 and 2015 and who met inclusion criteria were included in this study. Frailty was determined with the Kihon Checklist developed by the Japanese Ministry of Health, Labour and Welfare. The following three masticatory functions were evaluated: occlusal force, mixing ability and subjective chewing ability. The following confounding factors were investigated: age, sex, grip strength, comfortable walking speed, Mini-Mental State Examination (MMSE) score, Self-Rating Depression Scale (SDS) score, skeletal mass index (SMI), number of medications taken and number of remaining teeth. Statistical analysis was performed with binomial logistic regression analysis. RESULTS: Logistic regression analysis revealed that comfortable walking speed, SDS score, MMSE score and masticatory function were significantly related to progression to frailty or pre-frailty. Of the three masticatory function items evaluated, mixing ability and subjective chewing ability were related to frailty progression. CONCLUSION: Our results confirm that masticatory function was associated with the progression to pre-frailty or frailty among community-dwelling individuals 65 years and older over the 2-year period of this longitudinal study. Of the masticatory function items evaluated, mixing ability and subjective chewing ability were associated with frailty progression.

Influence of the mechanical properties of resilient denture liners on the retention of overdenture attachments.

STATEMENT OF PROBLEM: Information is lacking about the selection criteria for silicone resilient denture liners applied as a matrix material for attachments on overdentures. PURPOSE: The purpose of this in vitro study was to investigate the mechanical properties of silicone resilient denture liners and their influence on the initial retention force of overdenture attachments and the reduction in retention force over time. MATERIAL AND METHODS: Nine types of silicone resilient denture liner were injected and fixed to the matrix section of an experimental denture base. They were then fitted to an epoxy resin model that simulated the residual ridge with a patrix ball attachment (n=10). The retention force of the denture was measured with a digital force gauge, and the maximum force of traction (N) was regarded as the initial retention force. The retention force reduction (N) after repeated insertion and removal (n=5) was calculated by subtracting the retention force after 3348 cycles (3-year simulated insertion and removal) from the initial retention force. The intaglio of the matrix was observed with a scanning electron microscope (SEM) before and after the 3348 cycles. Four mechanical properties (hardness, strain-in-compression, tensile strength, and arithmetic mean roughness) of the resilient denture liners were measured. One-way ANOVA of the initial retention force of each lining material was performed, followed by the Scheffe test (α=.05). Pearson correlation analysis was used (α=.05) to analyze correlations of the initial retention force with the retention force reduction after insertion and removal and the mechanical properties of each material. Multiple regression analysis with the stepwise method extracted the initial retention force and the retention force reduction as dependent variables, and the resilient denture liner mechanical properties as explanatory variables (α=.05). RESULTS: The initial retention force of the resilient denture liners was 1.3 to 5.4 N. Multiple comparisons showed significant differences in some groups (P<.05). The retention force reduction of the resilient denture liners was 0.2 to 1.9 N. Multiple regression analysis with the stepwise method extracted hardness and strain-in-compression as explanatory variables for the initial retention force and the retention force reduction. CONCLUSIONS: Within the limitations of this in vitro study, hardness was found to influence the initial retention force of the overdenture, and strain-in-compression influenced the retention force reduction in the 3-year simulation.

Oral hypofunction in the older population: Position paper of the Japanese Society of Gerodontology in 2016.

BACKGROUND: There is growing international interest in identifying the effects of ageing on oral health and on appropriate strategies for managing oral disorders. The Japanese Society of Gerodontology (JSG), as the official representative of researchers and clinicians interested in geriatric dentistry in Japan, makes several recommendations on the concept of "oral hypofunction." AIMS: This study proposes diagnostic criteria and management strategies to reduce the risk of oral hypofunction among older people. CONCEPTUAL FRAMEWORK: We define oral hypofunction as a presentation of 7 oral signs or symptoms: oral uncleanness; oral dryness; decline in occlusal force; decline in motor function of tongue and lips; decline in tongue pressure; decline in chewing function; and decline in swallowing function. The criteria of each symptom were determined based on the data of previous studies, and oral hypofunction was diagnosed if the criteria for 3 or more signs or symptoms were met. CONCLUSIONS: We recommend that more evidence should be gathered from clinical studies and trials to clarify our diagnostic criteria and management strategies.