Comparative Outcomes of Block and Cancellous Iliac Bone Grafting in Older Unilateral Alveolar Cleft Patients.

OBJECTIVE: To compare osseous outcomes of block and cancellous iliac bone grafting in older unilateral alveolar cleft patients. DESIGN: Retrospective and observational follow-up study. SETTING: Cleft Lip and Palate Centre, Department of Oral and Maxillofacial Surgery, Affiliated Hospital of Stomatology, Nanjing Medical University, China. PATIENTS: Forty-five nonsyndromic patients with unilateral complete alveolar cleft were enrolled in this study (25 patients in block bone graft group and 20 patients in cancellous bone graft group). INTERVENTIONS: In cancellous bone graft group, the alveolar cleft was filled with iliac cancellous bone particulate. In group of block bone graft, the harvested bone block was trimmed and fixed in alveolar defect. MAIN OUTCOME MEASURES: A novel method was proposed to investigate the volume and density of residual bone graft at 1-week, 3- and 6-month, 1- and 2-year postoperatively based on cone beam computed tomography scans. RESULTS: No difference in bone graft volume was found between 2 groups at 1-week and 3-month postoperatively; however, the residual volume of block bone graft group was significantly larger than that of cancellous bone graft group at 6-month, 1- and 2-year postoperatively. The bone density of block bone graft group was lower at 1-week and 3-month postoperatively but was comparable at 6-month, 1- and 2-year postoperatively. Our method was reliable and accurate to identify the range of residual bone graft when the boundary of grafted bone could not be identified clearly. CONCLUSION: Block bone graft could achieve comparable bone density and retain a greater amount of residual bone comparing to cancellous bone graft.

Effect of verbascoside on apoptosis and metastasis in human oral squamous cell carcinoma.

Despite significant advances in therapy, the 5-year survival rates for patients with advanced stage oral cancers still remains poor as an appropriate treatment has not been found yet, due to side effects of chemo/radiotherapy. Verbascoside (VB), a major bioactive constituent of the Tsoong herb, displays pharmacological properties by exhibiting anti-oxidative, anti-inflammatory and anti-cancer activities. However, the underlining function and mechanism of VB in human oral squamous cell carcinoma (OSCC) remains unclear. In this study, we show that VB significantly decreased the viability and metastasis of HN4 and HN6 tumor cells, while promoting apoptosis. A xenograft OSCC mouse model further showed that intraperitoneal injection of VB strongly inhibited growth and lung metastasis of implanted tumor cells. Immunoblot analysis confirmed that VB effectively suppressed nuclear factor (NF)-κB activation and downstream Bcl-2/Bcl-XL expression, resulting in increased OSCC cell apoptosis. In addition, VB suppressed mRNA and protein expression of matrix metalloproteinase-9 via suppression of NF-κB activation, thereby inhibiting tumor cell metastasis. Inspiringly, compared to cisplatin-treated group, VB is a biocompatible agent without signficant side effects in vivo. Collectively, our results demonstrate that VB effectively inhibits OSCC tumor cell growth and metastasis via suppression of IκB kinase complex (IKK)/NF-κB-related signaling activation, suggesting that VB has potential use as a potent anticancer agent in OSCC therapeutic strategies.

Anatomical Study and Clinical Application of Facial Artery Perforator Flaps in Intraoral Reconstruction: Focusing on Venous System.

PURPOSE: Facial artery perforator flaps (FAPFs) are preferred for the repair of intraoral and peri-nasal defects because it is a convenient procedure with minimal donor-site morbidity. The purpose of this study was to investigate the anatomic features of FAPFs and present their clinical application in intraoral reconstruction. MATERIALS AND METHODS: Five cadaver specimens (10 sides) of the head and neck region and 90 clinical cases (90 sides) of neck dissection were analyzed to explore the facial venous drainage system of FAPFs. In addition, anatomic features of the facial artery and vein and the marginal mandibular branch of the facial nerve were investigated in cadaver specimens. Furthermore, the authors reviewed a series of 33 intraoral reconstruction cases using their designed FAPFs focusing on flap survival and facial venous drainage system types. RESULTS: Based on cadaveric and clinical observations, the facial vein drainage system was divided into 3 types: type A drained into the internal jugular vein (47%); type B drained into the external jugular vein (37%); and type C drained into the anterior jugular vein (16%). The mean distances from the facial artery to the vein at the region of the FAPF pedicle and tip were 2.79 ± 0.51 and 10.24 ± 0.70 mm, respectively. Most cases using the authors' designed FAPFs yielded satisfactory esthetic and functional outcomes, whereas 3 cases presented with venous congestion from type C facial vein drainage. CONCLUSION: This study improved the understanding of the anatomic features and clinical application of FAPFs in intraoral reconstruction. This FAPF design could be used to achieve superior intraoral defect reconstruction, and type C facial vein drainage might be a risk factor for flap survival.

Accurate Evaluation of Cone-Beam Computed Tomography to Volumetrically Assess Bone Grafting in Alveolar Cleft Patients.

OBJECTIVE: The aim of this study was to investigate the accuracy of cone-beam computed tomography (CBCT) to assess the volume of bone graft in alveolar cleft patients. MATERIALS AND METHODS: Twelve patients of unilateral alveolar cleft were included in this study. All patients were taken CBCT preoperative and 1 week postoperative. The digital imaging and communications in medicine (DICOM) files were imported into Simplant software and three-dimensional (3D) reconstruction of the alveolar defect was achieved. With 3D volumetric measurements module, the volume of alveolar cleft was calculated preoperatively. During operation, the syringe compression method was adopted to calculate the actual amount of bone graft. One week postoperative, CBCT scan was performed again to measure the bone volume grafted to the defect. The volumetric ratio of the syringe compression method to preoperative CBCT assessment and the volume difference between syringe compression method and postoperative CBCT assessment were analyzed to evaluate the accuracy of CBCT measurement. RESULTS: The 3D structure of the alveolar cleft and the boundary of bone graft was clear from CBCT images. The estimated volume of alveolar cleft by preoperative CBCT scans was 1.06 ±â€Š0.09 cm, and the actual amount of bone graft determined by the syringe compression method was 1.51 ±â€Š0.12 cm. The ratio between the latter to the former was 1.43 ±â€Š0.07. The calculated volume of bone graft by 1-week postoperative CBCT scans was 1.53 ±â€Š0.11 cm, with no significant difference compared with the actual amount of bone graft (P > 0.05). CONCLUSIONS: CBCT was an accurate measurement to calculate the volume of alveolar defect and bone graft in alveolar cleft patients. Preoperative scans could aid in quantitatively determining the bone amount needed to adequately fill the bone defect, and the postoperative scans give accurate follow-up evaluation after surgery.

Reconstruction of palatomaxillary defects following cancer ablation with temporalis muscle flap in medically compromised patients: a 15-year single institutional experience.

OBJECTIVES: Successful reconstruction of palatomaxillary defects following cancer ablation represents a formidable challenge for surgeons to achieve consistently favorable outcomes. The purpose of this article is to present our experience in oncologic palatomaxillary repair with temporalis muscle flap (TMF) for medically compromised patients who are not ideal candidates for microvascular reconstruction at a Chinese tertiary referral hospital over a 15-year period (1998-2012). METHOD: A retrospective chart review was performed to identify patients with compromised medical conditions who underwent oncologic palatomaxillary reconstruction using TMF. Patients' demographics, clinicopathological variables, and surgical techniques were presented. Postoperative functional and aesthetic outcomes were assessed by measurements and patients self-evaluations. RESULTS: Sixty-nine TMFs were successfully harvested and used for immediate oncologic palatomaxillary reconstruction in 67 patients (31 males and 36 females, mean age 60.4 years) with diverse primary malignancies. These patients' co-morbidities included systemic diseases, preoperative chemotherapy/radiotherapy, and elder over 65 years which precluded the ideal utility of free flaps. Fifty-one patients remained alive without disease, while nine had recurrences/metastases and seven died during the follow-up (0.5-10.4 years, mean 3.7 years). All flaps survived with only partial necroses in four cases. Complications and donor-site morbidities were minimal with five transient facial paralysis and four mild diplopia and enophthalmos. Unrestricted diet and mouth opening, intelligible speech, and satisfactory temporal aesthetics were obtained in most patients. CONCLUSION: The TMF is a reliable, versatile, and alternative option for oncologic palatomaxillary reconstruction with satisfactory functional and aesthetic outcomes and minimal complications, especially when appropriately selected for those medically compromised patients.

A new design of facial artery perforator flaps for the reconstruction of small- to medium-sized intraoral defects.

AIM: The aim of this study was to investigate the reliability and outcomes of a new design of facial artery perforator flaps, extending from the angle of the mouth to the border of the mandible, for the reconstruction of small- to medium-sized intraoral defects. PATIENTS AND METHODS: The technique had been used in 23 patients between February 2009 and August 2012. The locations of intraoral defects included the tongue, the floor of the mouth, the inferior gingival mucosa, and the sublingual gland. All flaps were monitored for complications including skin loss and ischemia. The functions of appearance, swallowing, and speech were assessed 6 months after operation with the University of Washington Quality of Life Questionnaire. RESULTS: All flaps presented with satisfactory results except for one, which demonstrated superficial tip necrosis that settled after conservative treatment. The follow-up period ranged from 6 to 12 months, and 1 patient died as a result of pulmonary metastasis, and 3 patients underwent second surgery because of local tumor recurrence (2patients) and cervical recurrence (1 patient). Nineteen patients were assessed with the University of Washington Quality of Life Questionnaire, and the mean (SD) scores of appearance, swallowing, and speech were 57.89 (14.45), 83.68 (19.98), and 81.58 (23.16), respectively. CONCLUSIONS: This design of facial artery perforator flaps could provide an efficient and cost-effective method for reconstruction of small- to medium-sized intraoral defects with a low surgical morbidity and satisfactory levels of quality of life.

Morphometric analysis of paired fibula and mandible for optimal fibular mandibular reconstruction in a Chinese population.

To analyze the morphology of paired fibula and mandible aiming to choose optimal fibular segments for mandibular reconstruction in a Chinses population. A total of 118 cases of paired mandible and fibula was collected. All patients were received preoperative cone beam CT (CBCT) scans for mandibular evaluation and CT-angiographical (CTA) examination of the bilateral lower legs, respectively. The cross-sectional morphological differences between proximal (Side P), middle (Side M) and distal (Side D) segments of fibula and anterior, premolar and molar areas of mandible were compared. The most frequent cross-sectional shape at Side D, Side M and Side P portion of fibula was circular (75.4%), triangular (67.8%) and circular (49.2%), respectively. In anterior, premolar and molar areas of mandible, the most of the cross-section was s-shape (90.82%), straight (83.64%) and oblique (91.89%), respectively. The height and width of upper one third (W1) at Side M were significantly larger than those of Side D and Side P (p < 0.0001). There was significantly difference of width of lower one third (W2) among three groups (p < 0.0001). As for the height and widths of mandible, there was significant difference among anterior, premolar and molar regions (p < 0.0001). The rate of height between Side M of fibula and mandible (H (Side M/area)) was significantly larger than H (Side D/area) and H (Side P/area) (p < 0.01). The ratio of W1 between Side D of fibula and mandible (W1 (Side D/area)) was significantly larger than that of W1 (Side M/area) and W1 (side P/area) (p < 0.05). As for the ratio of W2 between fibula and mandible (W2 (plane/area)), there was significant difference among groups (p < 0.01). The distal and middle segments of fibula were suitable for reconstructing the anterior area of mandible and the proximal segment of fibula was more compatible with the premolar and molar areas of mandible.Clinical Relevance Presurgical morphometric analysis of paired fibula and mandible aids for optimal fibular-based mandibular reconstruction.

Computer-aided design-based preoperative planning of screw osteosynthesis for type B condylar head fractures: A preliminary study.

OBJECTIVE: To investigate the clinical application of a new computer-aided design - (CAD) based planning method for the treatment of type B condylar head fractures without fragmentation. METHODS: A total of 13 adult patients (19 sides) with type B condylar head fractures were included in the study. In all cases, imaging was performed using cone bean computed tomography (CBCT) preoperative, and Digital Imaging and Communications in Medicine (DICOM) files were imported into Simplant 11.04 software. The fracture of the mandibular condyle was reconstructed by a three-dimensional reconstruction module, and the simulation of reduction was achieved according to the morphological characteristics. Preoperative design was performed based on the CAD technology, and the three-dimensional interface was used to determine the length, location, and orientation of the positional screw. Osteosynthesis was performed with a single positional screw according to the optimum direction assessed in the preoperative planning CBCT, and the result was confirmed with postoperative CBCT scans and clinical follow-up. RESULTS: Preoperative computer-aided design was able to predict the length, location, and direction of the positional screw. Postoperative CBCT results demonstrated that 12 cases (18 sides) were consistent with preoperative design with exception of one case (one side) due to unexpected rupture of the fragment. Six-month follow-up showed the condylar fractures were anatomically repositioned and that healing was excellent in 12 cases (18 sides) with minor displacement and resorption in one case (one side). Postoperative occlusion in all cases was excellent, and the maximum mouth opening improved from mean 1.2 cm preoperatively to a of mean 4.3 cm at 6 months postoperatively. The data for mandibular movements at 6 months postoperatively demonstrated the recovery of protrusion, without higher grade limitations for laterotrusion. In one case, there appeared to be mandibular deviation (<0.5 cm) with mouth opening. CONCLUSION: The new preoperative design provides relevant data for screw osteosynthesis to enhance the precision and effectiveness of open reduction and internal fixation type B condylar head fractures.