Iodine-doped TiO2 nanotube coatings: a technique for enhancing the antimicrobial properties of titanium surfaces against Staphylococcus aureus.

BACKGROUND: Implant-related infections are a challenging complication of orthopedic surgery, primarily due to the formation of bacterial biofilms on the implant surface. An antibacterial coating for titanium implants was developed to provide novel insights into the prevention and treatment of implant-related infections. METHODS: Titanium plates were coated with TiO2 nanotubes by anodization, and iodine was doped onto the coating via electrophoretic deposition. The obtained plates were characterized using a range of analytical techniques. Subsequently, Staphylococcus aureus was inoculated onto the surfaces of untreated titanium plates (control group), TiO2-nanocoated titanium plates (TiO2 group), and iodine-doped TiO2-nanocoated titanium plates (I-TiO2 group) to compare their antibacterial properties. RESULTS: Twenty-four hour in vitro antimicrobial activity test of the I-TiO2 group against Staphylococcus aureus was superior to those of the other groups, and this difference was statistically significant (P < 0.05). CONCLUSIONS: This coating technology provides a new theoretical basis for the development of anti-infective implants against Staphylococcus aureus in orthopedics.

Optimized Neural Network Based on Genetic Algorithm to Construct Hand-Foot-and-Mouth Disease Prediction and Early-Warning Model.

Accompanied by the rapid economic and social development, there is a phenomenon of the crazy spread of many infectious diseases. It has brought the rapid growth of the number of people infected with hand-foot-and-mouth disease (HFMD), and children, especially infants and young children's health is at great risk. So it is very important to predict the number of HFMD infections and realize the regional early-warning of HFMD based on big data. However, in the current field of infectious diseases, the research on the prevalence of HFMD mainly predicts the number of future cases based on the number of historical cases in various places, and the influence of many related factors that affect the prevalence of HFMD is ignored. The current early-warning research of HFMD mainly uses direct case report, which uses statistical methods in time and space to have early-warnings of outbreaks separately. It leads to a high error rate and low confidence in the early-warning results. This paper uses machine learning methods to establish a HFMD epidemic prediction model and explore constructing a variety of early-warning models. By comparison of experimental results, we finally verify that the HFMD prediction algorithm proposed in this paper has higher accuracy. At the same time, the early-warning algorithm based on the comparison of threshold has good results.

Recent progress in drug delivery of pluronic P123: pharmaceutical perspectives.

This review focuses on recent investigations that used Pluronic P123 (P123) as pharmaceutical ingredients in vesicle, micelle, mixed micelle, in situ gel, tablet and emulsion. The main results from these studies show that P123 can significantly increase the stability of incorporated hydrophobic drugs with enhanced in vitro cytotoxicity and cellular uptake of anticancer drugs. Moreover, modified forms of P123 with RGD, folate or other targeted marker have shown its therapeutic potentials in various types of tumors and cancers. Furthermore, modified forms of P123 alone and/or mixed with other copolymers have less toxic effects and more tumor-specific delivery of anticancer drugs. They are promising materials as a nanoplatform for the drug delivery. Finally, the future perspectives of the field are briefly discussed.

Repair of the radial defect of rabbit with polyester/tricalcium phosphate scaffolds prepared by rapid prototyping technology.

OBJECTIVE: To evaluate the effects of repairing rabbit radial defects with polyester/tricalcium phosphate scaffolds prepared by rapid prototyping technology loaded with bovine bone morphogenetic protein (bBMP), and find new carriers for growth factors. METHODS: Polyester/tricalcium phosphate scaffolds prepared by rapid prototyping technology loaded with and without bovine BMP were used to repair the 15 mm radial defect in rabbit. Then the results of radiography, histology, scaffolds degrade rates and bone mineral density (BMD) were appraised to examine the effects at the 12th week. RESULTS: At the 12th week postoperatively, all defects treated with bBMP were radiographically repaired. No radius implanted polyester/tricalcium phosphate scaffolds without bBMP showed radiographic and histological union. At experimental groups, longitudinal alignment of lamellar structure was observed histologically at the 12th week, indicating that remodeling of regenerated bone was complete in different degree. Of the three experimental groups, the bony regeneration and remodeling of callus in poly lactide-co-glycolide/tricalcium phosphate (PLGA/TCP) group was the best. The BMD values were beyond 70% of normal value at the 12th week while the PLGA/TCP scaffolds group was the highest, and no abnormalities were observed in the surrounding soft tissue in all groups. CONCLUSIONS: Polyester/tricalcium phosphate scaffolds prepared by rapid prototyping technology loaded with bovine BMP can repair a 15 mm radial defect of rabbit. As for the results, the PLGA/TCP scaffold is ideal and better than poly L-lactide-co-D, L-lactide (PDLLA/TCP) scaffold, but the ploy L-lactic acid (PLLA/TCP) is not so good for its low degradation rates.

[Preparation of gelatin nanogel modified with fluoride anion and its ultrasonic triggered release characteristics].

AIM: To investigate the preparation, shape and ultrasound triggered release characteristics of gelatin nanogel modified with fluoride anion. METHODS: Adriamycin gelatin nanogel modified with fluoride anion (ADM-FMNG) was prepared by co-precipitation with fluoride anion. The content and encapsulation rate of adriamycin were measured by HPLC method. The size and shape of ADM-FMNG were determined by electron microscope. The size and distribution of ADM-FDNG before and after sonication were measured by laser size analysis device. RESULTS: The average diameter of ADM-FMNG was (46 +/- 12) nm. Adriamycin encapsulated rate and loading were 87.2% and 0.091 g x L(-1), respectively. 48.5% of adriamycin was released within 50 h while in vitro at 37 degrees C. Under the action of ultrasound that has the frequency of 20 kHz, 0.4 W x cm(-2) of power density and 7-8 min duration, 51. 5% of adriamycin in ADM-FMNG was released that was significantly higher than control group, the size of ADM-FMNG was changed from (46 +/- 12) nm to (1,212 +/- 35) nm and restored after ultrasound stopped for 3-4 min. CONCLUSION: ADM-FDNG system has the sensitive ultrasound triggered release characteristics.

[Repair of the radial defect of rabbit by polyester/tricalcium phosphate scaffolds prepared by rapid prototyping technology].

OBJECTIVE: To evaluate the repairing effect of the rabbits radial defects of by polyester/tricalcium phosphate scaffolds prepared by rapid forming technology loaded with bovine BMP, and find a new carrier for growth factor. METHODS: Polyester/Tricalcium phosphate scaffolds prepared by rapid prototyping (RP) technology loaded with and without bovine BMP were used to repair the 15 mm radial defect of rabbit. Then results of radiography, histology, scaffolds degrade rates and bone density were appraised to examine the repairing effects of the scaffolds at 12 weeks. RESULTS: At 12 weeks, all defects treated with bBMP were radiographically repaired. No radii implanted polyester/tricalcium phosphate scaffolds alone showed radiographic and historical union. At experimental groups, longitudinal alignment of lamellar structure was observed histologically at 12 weeks, indicating that remodeling of regenerated bone almost completed, the scaffolds degradation rates were different by 12 weeks, and no abnormalities were observed in the surrounding soft tissue in all groups. CONCLUSION: Polyester/tricalcium phosphate scaffolds prepared by rapid prototyping technology loaded with bovine BMP can repair the rabbits radical defects. As for the effects, the poly (L-lactic-co-glycolide)/tricalcium phosphate (PLGA/TCP) scaffold are ideal and better than poly (L-lacide-co-D, L-lactide)/tricalcium phosphate (PDLLA/TCP) scaffold, but the poly (L-lactic acid)/tricalcium phosphate (PLLA/TCP) is not so good for its low degradation rates.

[Efficacy of double-door laminoplasty combined with hydroxyapatite artificial bone grafting for cervical spinal stenotic myelopathy].

OBJECTIVE: To evaluate the effects of double-door laminoplasty and hydroxyapatite artificial bone grafting in the treatment of cervical spinal stenotic myelopathy. METHODS: Twelve cases of cervical spinal stenotic myelopathy underwent expansive double-door laminoplasty of the cervical spine and hydroxyapatite artificial bone grafting. The clinical outcome of the patients and the operative procedures were assessed. RESULTS: The 5-year follow-up showed significantly alleviated clinical symptoms and improved physical signs in all the patients except for 1 patient who responded poorly to the surgery. CONCLUSIONS: Expansive double-door laminoplasty of the cervical spine in combination with hydroxyapatite artificial bone grafting is safe and effective for treating cervical spinal stenotic myelopathy. Hydroxyapatite artificial bone possesses good biological compatibility and osteoconduction, and is applicable in the laminoplasty procedures as an ideal bone graft material.

Catalytic pyrolysis of cellulose with sulfated metal oxides: a promising method for obtaining high yield of light furan compounds.

Pyrolysis-gas chromatography/mass-spectrometry (Py-GC/MS) was employed to achieve fast pyrolysis of cellulose and on-line analysis of the pyrolysis vapors. Three sulfated metal oxides (SO(4)(2-)/TiO(2), SO(4)(2-)/ZrO(2) and SO(4)(2-)/SnO(2)) were prepared and used for catalytic cracking of the pyrolysis vapors. The distribution of the pyrolytic products was significantly altered by the catalysts. Those important primary pyrolytic products, such as levoglucosan and hydroxyacetaldehyde, were significantly decreased or even completely eliminated. Meanwhile, the catalysis increased three light furan compounds (5-methyl furfural, furfural and furan) greatly. In regard to the selectivity of the three catalysts, the SO(4)(2-)/SnO(2) was the most effective catalyst for obtaining 5-methyl furfural, while the SO(4)(2-)/TiO(2) favored the formation of furfural and the SO(4)(2-)/ZrO(2) favored the formation of furan.