Adjustable flanged technique for secondary implantation of four-point scleral­fixated posterior chamber intraocular lenses using two parallel 6-0 polyglactin sutures.

OBJECTIVE: To assess the efficacy and safety of using the adjustable flanged technique for secondary implantation of four-point scleral­fixated posterior chamber intraocular lenses with two parallel 6-0 polyglactin sutures. METHODS: Two parallel 6-0 polyglactin sutures were passed separately through the two haptics on the horizontal line of the 4-haptic IOL. The four externalized sutures were then trimmed and cauterized to form flanges. The best corrected visual acuity, intraocular pressure, and complications in all patients were observed and recorded. RESULTS: The flanged technique using two parallel 6-0 polyglactin sutures was applied to 14 aphakic eyes. The average preoperative best corrected visual acuity was 1.00 ± 0.88 LogMAR (Snellen 20/200), which improved to 0.42 ± 0.38 LogMAR (Snellen 20/48) at the final follow-up (P = 0.004). None of the patients experienced vitreous hemorrhage, low intraocular pressure, or issues with exposed or broken sutures. CONCLUSION: The simplicity of the technique, along with its ability to accommodate adjustments post-implantation, allows for optimal positioning and reduces risks like IOL tilt or dislocation. Overall, this is a promising approach to secondary IOL implantation, with potential benefits for both patient outcomes and surgical efficiency.

Finite element analysis of stress in oral mucosa and titanium mesh interface.

BACKGROUND: The stiffness of titanium mesh is a double-blade sword to repair larger alveolar ridges defect with excellent space maintenance ability, while invade the surrounding soft tissue and lead to higher mesh exposure rates. Understanding the mechanical of oral mucosa/titanium mesh/bone interface is clinically meaningful. In this study, the above relationship was analyzed by finite elements and verified by setting different keratinized tissue width in oral mucosa. METHODS: Two three-dimensional finite element models were constructed with 5 mm keratinized tissue in labial mucosa (KM cases) and 0 mm keratinized tissue in labial mucosa (LM cases). Each model was composed of titanium mesh, titanium screws, graft materials, bone, teeth and oral mucosa. After that, a vertical (30 N) loadings were applied from both alveolar ridges direction and labial mucosa direction to stimulate the force from masticatory system. The displacements and von Mises stress of each element at the interfaces were analyzed. RESULTS: Little displacements were found for titanium mesh, titanium screws, graft materials, bone and teeth in both LM and KM cases under different loading conditions. The maximum von Mises stress was found around the lingual titanium screw insertion place for those elements in all cases. The keratinized tissue decreased the displacement of oral mucosa, decreased the maximum von Mises stress generated by an alveolar ridges direction load, while increased those stress from labial mucosa direction load. Only the von Mises stress of the KM cases was all lower than the tensile strength of the oral mucosa. CONCLUSION: The mucosa was vulnerable under the increasing stress generated by the force from masticatory system. The adequate buccal keratinized mucosa width are critical factors in reducing the stress beyond the titanium mesh, which might reduce the titanium exposure rate.

Polyetherketoneketone Mesh for Alveolar Bone Augmentation: Geometric Parameter Design and Finite Element Analysis.

Objective: To evaluate the mechanical properties of porous polyetherketoneketone (PEKK) meshes with different thicknesses, pore sizes, and porosities through finite element analysis to provide an optimal PEKK design for alveolar bone augmentation in the posterior mandibular region. Methods: A three-dimensional evaluation model of severe alveolar bone defects in the mandibular posterior was constructed based on cone beam computerized tomography (CBCT) data. Then, PEKK meshes with different structural designs were obtained. Two key parameters were set with different values: five levels of thickness (0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, and 0.6 mm) and three levels of pore size (1 mm, 2 mm, and 3 mm) with a corresponding porosity of 19.18%-42.67%. A 100 N physiological force was simultaneously loaded by finite element analysis (FEA), and the deformation and stress data were outputted for further analysis. Results: The deformation and stress of the PEKK meshes are negatively correlated with the changes in thickness and positively correlated with the changes in pore size. The FEA results show that the maximum deformation, equivalent stress, and maximum principal stress of the PEKK meshes are 0.168 mm-0.478 mm, 49.243 MPa-124.890 MPa, and 31.549 MPa-104.200 MPa, respectively. The PEKK mesh group with a thickness of 0.2 mm, pore size of 3 mm, and porosity of 42.67% is in danger of plastic deformation or even fracture during use. Conclusion: According to the FEA results, the PEKK meshes with larger thicknesses and smaller pore sizes and porosities behave better. In consideration of reducing soft tissue stimulation and promoting bone regeneration, an ultrathin porous PEKK mesh with a pore size of no more than 3 mm, porosity of no more than 42.67%, and thickness of 0.2 mm can be used clinically to meet the mechanical performance requirements of the guided bone regeneration (GBR) structure.

Applications of Polydopamine in Implant Surface Modification.

There is great clinical demand for orthopedic and dental implant surface modification methods to prevent osseointegration failure and improve implant biological functions. Notably, dopamine (DA) can be polymerized to form polydopamine (PDA), which is similar to the adhesive proteins secreted by mussels, to form a stable bond between the bone surface and implants. Therefore, PDA has the potential to be used as an implant surface modification material with good hydrophilicity, roughness, morphology, mechanical strength, biocompatibility, antibacterial activity, cellular adhesion, and osteogenesis. In addition, PDA degradation releases DA into the surrounding microenvironment, which is found to play an important role in regulating DA receptors on both osteoblasts and osteoclasts during the bone remodeling process. Furthermore, the adhesion properties of PDA suggest its use as an intermediate layer in assisting other functional bone remodeling materials, such as nanoparticles, growth factors, peptides, and hydrogels, to form "dual modifications." The purpose of this review is to summarize the recent progress in research on PDA and its derivatives as orthopedic and dental implant surface modification materials and to analyze the multiple functions of PDA.

Cytokine expression in gingival crevicular fluid around teeth opposing dental implants and 3-unit fixed partial dentures in a cross-sectional study.

OBJECTIVE: This study aimed to study the cytokines in gingival crevicular fluid (GCF) of the teeth opposing to dental implants and 3-unit fixed partial dentures (FPDs). MATERIALS AND METHODS: A total of 74 participants were recruited for this cross-sectional study. Based on the status of lower first molars, the participants were divided into dental implants group and 3-unit FPDs group. Social index and oral hygiene were recorded. Occlusal loading was evaluated with a T-scan. GCF was sampled from the upper first molar and assessed with a commercial cytokine assay kit. RESULTS: Forty three dental implants patients and 31 3-unit FPDs patients received all of the clinical and laboratory evaluation. The dental implants group had a higher occlusion force distribution on first molars region. IL-10, IL-17, RANK had a higher mean in dental implants group and was associated with occlusion force of first molar. There was a weakly association between IL-10 and dental implants in the binary logistic regression analyses. CONCLUSIONS: In this study, the teeth opposing implants have a higher level of cytokines in the GCF than teeth opposing to 3-unit FPDs in periodontal healthy participants because of the poor osseoperception of dental implants. IL-10 might reflect a higher occlusion force in dental implants region. CLINICAL RELEVANCE: This study provided that different tooth restoration methods could influence the periodontal status of the contact teeth.

Injectable Tissue-Adhesive Hydrogel for Photothermal/Chemodynamic Synergistic Antibacterial and Wound Healing Promotion.

It is an exigent need for the development of hydrogel dressings with desirable injectability, good adhesive, antibacterial, and wound healing promotion properties. Herein, the multifunctional injectable hydrogels with good tissue adhesion are designed based on Ag-doped Mo2C-derived polyoxometalate (AgPOM) nanoparticles, urea, gelatin, and tea polyphenols (TPs) for antibacterial and wound healing acceleration. After being injected into the tissue, urea diffuses out under the concentration gradient, and TPs and gelatin chains recombine to trigger the in situ formation of hydrogel with excellent adhesiveness. AgPOM fixed in the hydrogel could not only react with hydrogen peroxide in the infection site to generate singlet oxygen to kill the bacteria but also convert near-infrared light into heat under 1060 nm laser irradiation to realize sterilization. In vitro studies display the high bactericidal ability of the hydrogel against drug-resistant Staphylococcus aureus and also exhibit a prominent therapeutic effect on infected wounds through synergistic photothermal/chemodynamic therapy and accelerate wound healing. Hence, the injectable hydrogel with AgPOM as the antimicrobial agent can be a novel therapeutic agent for drug-resistant bacteria-infected wounds and wound healing promotion.

An electrochemical sensor based on Ce-MOF-derived Ce-doped poly(3,4-ethylenedioxythiophene) composite for efficient determination of rutin in food.

As a common antioxidant and nutritional fortifier in food chemistry, rutin has positive therapeutic effects against novel coronaviruses. Here, Ce-doped poly(3,4-ethylenedioxythiophene) (Ce-PEDOT) nanocomposites derived through cerium-based metal-organic framework (Ce-MOF) as a sacrificial template have been synthesized and successfully applied to electrochemical sensors. Due to the outstanding electrical conductivity of PEDOT and the high catalytic activity of Ce, the nanocomposites were used for the detection of rutin. The Ce-PEDOT/GCE sensor detects rutin over a linear range of 0.02-9 µM with the limit of detection of 14.7 nM (S/N = 3). Satisfactory results were obtained in the determination of rutin in natural food samples (buckwheat tea and orange). Moreover, the redox mechanism and electrochemical reaction sites of rutin were investigated by the CV curves of scan rate and density functional theory. This work is the first to demonstrate the combined PEDOT and Ce-MOF-derived materials as an electrochemical sensor to detect rutin, thus opening a new window for the application of the material in detection.

Hygroscopic Porous Polymer for Sorption-Based Atmospheric Water Harvesting.

Sorption-based atmospheric water harvesting (SAWH) holds huge potential due to its freshwater capabilities for alleviating water scarcity stress. The two essential parts, sorbent material and system structure, dominate the water sorption-desorption performance and the total water productivity for SAWH system together. Attributed to the superiorities in aspects of sorption-desorption performance, scalability, and compatibility in practical SAWH devices, hygroscopic porous polymers (HPPs) as next-generation sorbents are recently going through a vast surge. However, as HPPs' sorption mechanism, performance, and applied potential lack comprehensive and accurate guidelines, SAWH's subsequent development is restricted. To address the aforementioned problems, this review introduces HPPs' recent development related to mechanism, performance, and application. Furthermore, corresponding optimized strategies for both HPP-based sorbent bed and coupling structural design are proposed. Finally, original research routes are directed to develop next-generation HPP-based SAWH systems. The presented guidelines and insights can influence and inspire the future development of SAWH technology, further achieving SAWH's practical applications.

A novel temperature-responsive electrochemical sensing platform for reversible switch-sensitive detection of acetamidophenol.

A novel facile, quick, and temperature-controlled sensor was constructed based on a polystyrene-poly-N,N-diethyl acrylamide-polystyrene (PS-PDEAM)/carboxylated multi-walled carbon nanotube (MWCNT) composite modified glass carbon electrode. The sensor achieves acetaminophen (AP) reversibility through better temperature sensitivity. PS-PDEAM shrinks when the temperature exceeds its lower critical temperature (LCST). When AP molecules pass through the modified interface, the electron transfer rate is accelerated, and the sensor is turned on. In the off state, the electrochemical response of AP cannot be detected. Under ideal experimental conditions, for composite modified films, there is a wide detection range of AP between 1.5-85.1 µM and 85.1-235.1 µM, and the limit of detection of acetaminophen is as low as 0.57 µM (S/N = 3). This method has been successfully applied to the determination of AP in tablets, and shows high stability, good reproducibility and excellent anti-interference ability. The on-off sensor opens up a wide range of possibilities for the use of temperature-sensitive polymers in electro-catalysis, sensors, and environmental pollutant monitoring.

Determination of luteolin in Chrysanthemum tea with a ultra-sensitive electrochemical sensor based on MoO3/poly(3,4-ethylene dioxythiophene)/gama-cyclodextrin metal-organic framework composites.

Chrysanthemum tea is a tranditional Chinese health drink, which contains luteolin, a flavonoid with vesatile health benefit activities. Herein, A sensitive electrochemical sensor based on composite materials consisting of MoO3 nanorods, poly (3, 4-ethylene dioxyethiophene)(PEDOT), and γ-cyclodextrin metal-organic framework(CD-MOF) was prepared.The materials were characterized and analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). Due to the synergisticeffects of the materials, the sensor showed a wide linear range of 0.4 nM -1800 nM and a low detection limit (LOD) of 0.1 nM (S/N = 3) for luteolin under optimized conditions. Besides, the influences of some coexistent phenolic compounds and common metal ions on luteolin detection were evaluated and no significant interference was observed. Finally, the sensor was successfully applied to the detection of luteolin in real Chrysanthemum tea samples.

High-Efficient Vacuum Ultraviolet-Ozone Assist-Deposited Polydopamine for Poly(lactic-co-glycolic acid)-Coated Pure Zn toward Biodegradable Cardiovascular Stent Applications.

Zinc is a prospective metal for biodegradable cardiovascular stent applications, but the excessively released Zn2+ during degradation remains a huge challenge in biocompatibility. Considerable efforts have been made to develop a high-efficient surface modification method, while maintaining adhesion strength, mechanical support, and vascular compatibility. Biomimetic polydopamine (PDA) can adhere to Zn tightly, subsequently achieving robust chemical bonds with poly(lactic-co-glycolic acid) (PLGA) coating. However, the deposition of PDA on Zn depends on the controlled conditions such as a sensitive pH and a long period of time. Herein, we introduce vacuum ultraviolet-ozone (VUV/O3) assist-deposition technology to accelerate the polymerization of PDA on pure Zn, which shortens the process to 40 min at a moderate pH of 8.5 and improves the deposition rate by 1-2 orders of magnitude under sufficient active oxygen species (ROS). Additionally, PLGA/PDA coating enhances the corrosion resistance, and their effective protection maintains the mechanical properties after long-term corrosion. Moreover, the controlled Zn2+ release contributes to the superior in vitro biocompatibility, which inhibits the hemolysis rate and smooth muscle cell (SMC) proliferation. The enhanced endothelial cell (EC) proliferation is promising to promote the re-endothelialization, avoiding in-stent restenosis and neointimal hyperplasia. Such modified Zn might be a viable candidate for the treatment of cardiovascular diseases.

Micro-arc oxidation-assisted sol-gel preparation of calcium metaphosphate coatings on magnesium alloys for bone repair.

Calcium phosphate coating is an attractive surface modification strategy for magnesium alloys, since it can increase their corrosion resistance and endow them with osteogenic function simultaneously. Herein, a calcium metaphosphate (CMP) coating was fabricated on magnesium alloy by using sol-gel approach assisted with micro-arc oxidation pre-treatment. Scanning electron microscopy showed that the micro-pores and cracks in micro-arc oxidation inner layer generated during the pre-treatment process were sealed by the grainy sol-gel outer layer. Energy dispersive spectrometry and X-ray diffraction results demonstrated the identity of the coating as CMP. The cross-cut test showed that the adhesion of CMP coating was strong. Applying bare magnesium alloy substrate as a control, the CMP coating surface was rougher and more hydrophilic. The potentiodynamic polarization test demonstrated that the corrosion resistance was significantly improved by using CMP coating. Hydrogen evolution in immersion test further confirmed that the degradation rate was decelerated within 14 days. Moreover, CMP coating facilitated the adhesion speed, spreading area, and focal adhesion formation of bone marrow stem cells. The number of cells in the active proliferating state and proliferated cells present on the CMP coating also increased. Additionally, CMP coating upregulated alkaline phosphatase activity and osteogenic gene expression in cells. In summary, the micro-arc oxidation assisted sol-gel CMP coatings increased the corrosion resistance and promoted the interfacial cell behavior for magnesium alloy implants, which might inform the further development of surface modifications on magnesium alloys for bone related applications.

Catalytic upcycling of waste plastics over nanocellulose derived biochar catalyst for the coupling harvest of hydrogen and liquid fuels.

A powerful simple biochar catalyst derived from nanocellulose was applied to the catalytic upcycling of waste plastics into H2 and liquid fuels for the first time. For the results from model low-density polyethylene (LDPE) pyrolysis, the C8-C16 aliphatics and monocyclic aromatics were dominant constitutes of the liquid product with the yields ranging from 22 to 68 wt%. At the temperature of 500 °C and biochar to LDPE ratio surpassing 3, the LDPE could be completely degraded into liquid and gas without wax production. A wax yield of 16 wt% was observed at the temperature of 450 °C and biochar to LDPE ratio of 4, which was dramatically lower than that (77 wt%) from the absence of biochar at the temperature of 500 °C. Up to 92 vol% of H2 was detected in the gaseous product with a yield of 36 wt%. The lower temperatures and higher biochar to LDPE ratios favored increasing the generation of H2 at the expense of light gas CnHm especially CH4. Moreover, this biochar catalyst was tested effectively to convert the real waste plastics including grocery bags and packaging tray into valuable liquid and H2-enriched gas.

One-step synthesis of biomass-based sulfonated carbon catalyst by direct carbonization-sulfonation for organosolv delignification.

Biomass-based sulfonated carbon catalyst (SCC) was prepared from corncob via direct sulfuric acid carbonization-sulfonation treatment. Central composite design was used to evaluate temperature and time for optimizing SCC yield and sulfonic acid (SO3H) density. The SO3H groups were successfully introduced to the SCC as evidenced by FTIR and sulfur analysis. Numerical optimization results showed that 100 °C and 5.78 h are the optimal conditions for maximizing yield (61.24%) and SO3H density (1.1408 mmol/g). The highest ethanol organosolv lignin (EOL) yield of 63.56% with a substrate yield of 39.08% was achieved at 20% SCC loading in the ethanol organosolv delignification of lignocellulosic biomass. The FTIR spectra of the isolated lignin revealed typical features of G-lignin, indicating that no drastic changes took place in the lignin structure during the process. This study developed a simple one-step preparation method of SCC, which was successfully used as a catalyst in an organosolv delignification of biomass.

Self-adhesive protein/polypyrrole hybrid film for flexible electronic sensors in physiological signal monitoring.

Flexible electronic sensors composed of conductive material and flexible film have attracted increasing attention in decades due to its commercial, medical and scientific value. However, the poor interfacial bonding robustness between conductive materials and flexible film influences widely practical application of sensors. It is still a great challenge to fabricate a self-adhesive conductive film. Herein, we report a freestanding and self-adhesive bovine serum albumin/polypyrrole (BSA/PPy) hybrid film at the air/water interface. It is discovered that the PPy nanoparticles aggregate uniformly on the BSA film that is formed by amyloid-like BSA aggregation. The BSA/PPy film was integrated with polydimethylsiloxane (PDMS) film to fabricate flexible electronic sensors. The test indicates that the BSA/PPy film-based sensor could tolerate 500 cycles of bending without the resistance performance variation. The BSA/PPy film functions as a key mediator to dynamically tune the PPy conductance in response to external pressures and strains. The sensors exhibit ability for detecting tiny acoustic vibration, real-time human motion, physiological behavior and for differentiating various breathing pattern. Our strategy may open a pathway to readily construct flexible electronic sensors toward practical applications.

Facile distribution of an alkaline microenvironment improves human bone marrow mesenchymal stem cell osteogenesis on a titanium surface through the ITG/FAK/ALP pathway.

PURPOSE: Osseointegration at the titanium surface-bone interface is one of the key factors affecting the success rate of dental implants. However, the titanium surface always forms a passive oxide layer and impacts bone marrow-derived mesenchymal stem cell (BMSC) osteogenic differentiation after exposure to the atmosphere, which further leads to poor osseointegration. Given that wet storage helps prevent titanium aging and that weakly alkaline conditions stimulate BMSC osteogenic differentiation, the aim of the present study was to explore whether sodium bicarbonate, a well-known hydrogen ion (pH) buffer, forms an alkaline microenvironment on titanium surfaces to promote BMSC osteogenic differentiation. MATERIAL AND METHODS: In this work, sand-blasted and acid-etched (SLA) titanium discs were soaked in 20 mM, 50 mM, 100 mM, and 200 mM sodium bicarbonate at room temperature for 5 min without rinsing. The influence of this surface modification on BMSC adhesion, proliferation, and osteogenic differentiation was measured. Additionally, cellular osteogenic differentiation-associated signaling pathways were evaluated. RESULTS: We showed that titanium discs treated with sodium bicarbonate created an extracellular environment with a higher pH for BMSCs than the normal physiological value for 5 days, strongly promoting BMSC osteogenic differentiation via the activation of integrin-focal adhesion kinase-alkaline phosphatase (Itg-FAK-ALP). In addition, the proliferation and adhesion of BMSCs were increased after alkaline treatment. These cellular effects were most significant with 100 mM sodium bicarbonate. CONCLUSION: The results indicated that the titanium surface treated with sodium bicarbonate improved BMSC osteogenic differentiation mainly by creating an alkaline microenvironment, which further activated the Itg-FAK-ALP signaling pathway. CLINICAL RELEVANCE: Surfaces modified with 100 mM sodium bicarbonate had the highest initial pH value and thus showed the greatest potential to improve BMSC performance on titanium surfaces, identifying a novel conservation method for dental implants.

Changes in epidemiological features of vaccine preventable infectious diseases among three eras of national vaccination strategies from 1953 to 2018 in Shanghai, China.

BACKGROUND: Recurring outbreaks of infectious diseases highlight the importance of population vaccination strategies. We aimed to assess the impact of national vaccination strategies on vaccine-preventable infectious diseases (VPDs) in Shanghai, China and to identify vulnerable groups that may benefit from future vaccination policies. METHODS: Infectious disease data from 1953 to 2018 was obtained from Xuhui District Center for Disease Control and Prevention, Shanghai China. We used joinpoint regression to show incidence, mortality and fatality trends and to determine annual percent change in incidence of 12 VPDs among three eras of national immunization strategies: (1)1953-1977, (2)1978-2007, and(3)2008-2018. FINDINGS: Incidence, mortality, and fatality from VPDs have decreased drastically over the three eras, despite the inclusion of more diseases over time. Strikingly, the overall yearly incidence of VPDs shows an increasing trend from 2000 to 2018 in Shanghai (annual percentage changes, APC:7.7, p = 0.025). In the third era (2008-2018), the three VPDs with the highest incidence were varicella (80.2 cases/100,000), hand, foot, and mouth disease (HFMD) (73.6 cases/100,000), and hepatitis (43.5 cases/100,000). A significant upward trend was also observed in hepatitis (APC:24.9, p<0.001), varicella (APC:5.9, p = 0.006), and HFMD (APC:11.8, p = 0.003) from 2008-2018. Hepatitis and tuberculosis are the only VPDs with fatality cases in this period. INTERPRETATION: Focus is needed in controlling adult hepatitis and tuberculosis, either by introducing adult booster vaccines or by research into more effective vaccines. Varicella and HFMD are on the rise, but vaccines for these are not included in national programs. Strategies funded by government agencies or encouraged by research incentives are needed for varicella and HFMD, such as two-dose and novel multi-valent vaccines, respectively. FUNDING: Chinese Ministry of Education, Shanghai Municipal Government.

Fabrication and characterization of silk fibroin coating on APTES pretreated Mg-Zn-Ca alloy.

To delay the degradation of magnesium alloys, silk fibroin as a natural organic polymer coating was fabricated on a 3-amino-propyltriethoxysilane (APTES) pretreated Mg-Zn-Ca alloy. APTES pretreatment coated the surface of magnesium alloys with amino groups, which can bond with functional groups in silk fibroin to form a compact coating/substrate interface. The influences of the APTES concentration and drying temperature on the coating adhesion and interface were investigated to explore the optimal parameters in the fabrication process. The nanoporous silk fibroin films completely covered the APTES pretreated Mg-Zn-Ca surface, which reached a thickness of ~7 µm. The chemical states for the coated Mg-Zn-Ca alloy were compared to those of the bare Mg-Zn-Ca alloy and the APTES pretreated Mg-Zn-Ca alloy to illustrate the coating mechanism. During in vitro degradation and electrochemical measurements in simulated body fluid (SBF), the samples with the silk fibroin coating showed remarkably improved corrosion resistance and a slower degradation rate compared to those of the bare samples, suggesting that the silk fibroin coating was an effective protection coating for the substrates and can delay the degradation of magnesium alloys. Moreover, a model for the in vitro degradation was proposed. In vitro cell experiments confirmed the excellent biocompatibility of silk fibroin coated Mg-Zn-Ca structure.

Synthesis and characterization of sulfonated activated carbon as a catalyst for bio-jet fuel production from biomass and waste plastics.

Sulfonated activated carbon-based catalysts were prepared by microwaved-assisted carbonization of phosphoric acid activated corncob followed by sulfonation using concentrated sulfuric acid. Sulfonation at different temperatures and times resulted in varied SO3H group density of the SAC catalysts. Sulfonation temperature showed a significant effect on the introduction of SO3H on the AC precursor while time had minor role. The SAC catalysts were characterized by means of N2 sorption analysis (specific surface area, pore-volume, average pore width), FTIR spectroscopy, SEM imaging, and sulfur analysis. The impact of catalysts SO3H density on the product distribution and bio-oil composition from the catalytic co-pyrolysis of Douglas fir and LDPE was evaluated. The highest bio-jet fuels (aromatics and C9-16 alkanes) obtained was 97.51% using the SAC catalyst sulfonated at 100 °C for 5 h. Results showed that SAC has great potential as catalyst in the co-pyrolysis of biomass and plastics for the production of jet-fuel range hydrocarbons.

Light-responsive polymersomes with a charge-switch for targeted drug delivery.

Unlike the traditional block amphiphilic polymersomes, we herein report a lipid-like amphiphilic polymer that self-assembles into photo-responsive polymersomes for drug delivery. The introduction of a quaternary ammonium moiety not only provides a hydrophilic segment of the polymersomes, but also enables electrostatic adsorption with folic acid, thus achieving the targeting of cancer cells with overexpression of folate receptor. Upon light irradiation, the photocleavage reaction of the o-nitrobenzyl moiety disintegrates polymersomes by changing the polymer structure from cationic amphiphilic state to zwitterionic hydrophilic state, thus realizing photo-triggered drug release. The data showed that anticancer drugs (doxorubicin hydrochloride, DOX·HCl) can be loaded into the hydrophilic cavity of polymersomes and controllably released by photo-induced disintegration of polymersomes. Cellular assay showed that the active targeting of folic acid and photo-triggered release endowed the DOX-loaded polymersomes with a higher cytotoxicity to HeLa cells. Such cationic polymersomes provide a novel strategy for designing effective and intelligent drug carriers, and have potential application as a novel integrated platform for targeted drug delivery.