Bio-based epoxy vitrimer with inherent excellent flame retardance and recyclability via molecular design.

The development of biobased fire-safe thermosets with recyclability heralds the switch for a transition towards a circular economy. In this framework, we introduced a novel high-performance bio-epoxy vitrimer (named GVD), which was fabricated by forming a crosslinking network between bio-epoxy glycerol triglycidyl ether (Gte), varying amounts of reactive flame-retardant agent 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) (0-7 wt%) and a vanillin-based hardener (VA) with imine bonds. For instance, the epoxy vitrimer GVD5, featuring a DOPO content of 5 wt%, achieved a V-0 rating in the vertical burning test (UL-94) and obtained a limiting oxygen index (LOI) value of 31 %, surpassing the performance of pristine epoxy. Furthermore, the peak heat release rate and total heat release of GVD5 were reduced by 38.2 % and 26.3 %, respectively, compared to pristine epoxy. The GVD vitrimers further demonstrated exceptional reprocessability and recyclability, attributed to the presence of dynamic imine bonds within the topological crosslinking network. Remarkably, the epoxy vitrimers maintained the mechanical properties of the parent epoxy. Therefore, this work provides a facile strategy for fabricating high-performance and multi-functional bio-epoxy thermosets.

Multifunctional polylactic acid sensing fabric based on biomass flame retardants for intelligent fire early-warning.

Today, building materials emit many hazardous gases in the event of a fire, causing great harm to human health and the environment. Therefore, it is of great significance to develop bio-based flame retardant materials and to realize preventive measures to reduce fires or their damage. In this work, we fabricated a novel multifunctional fire early-warning polylactic acid-based fabric (MFR-PBF) by coating MXene nanosheet, phytic acid @ furfurylamine (PA@FA) and ammonium polyphosphate (APP) via an eco-friendly layer-by-layer assembly method. MFR-PBF showed outstanding flame retardancy including a limiting oxygen index value of 35 % and better char formation capacity. More importantly, MFR-PBF exhibited sensitive fire early-warning capability (∼1 s) and excellent cyclic alarm stability (>15 cycles) due to the excellent semiconductor responsiveness (light and heat) and the significant catalytic char formation effect. Moreover, MFR-PBF is comfortable, flexible and strong enough to sew onto firefighter uniform to detect a variety of human motions, which can be monitored in the internet by using a LoRa emitter and a gateway. In addition, the controllable heating performance rendered MFR-PBF as a potential portable heater. This work provides new insights into the preparation and application of intelligent fire early-warning fabrics in the smart fire protection and Internet of Things.

All-Fabric Triboelectric Nanogenerator (AF-TENG) Smart Face Mask: Remote Long-Rate Breathing Monitoring and Apnea Alarm.

Since the beginning of the COVID-19 pandemic, the use of face masks has become not only mandatory in several countries but also an acceptable approach for combating the pandemic. In the quest for designing an effective and useful face mask, triboelectric nanogenerators (TENGs) have been recently proposed. Novel functionalities are provided with the use of TENGs in face masks due to the induced triboelectrification generated by the exhaled and inhaled breath, allowing their use as an energy sensor. Nonetheless, within the face mask, the presence of nontextile plastics or other common triboelectric (TE) materials can be undesired. Herein, we propose the use of an all-fabric TENG (AF-TENG) with the use of high molecular weight polyethylene (UHMWPE) and cotton fabric as negative and positive triboelectric layers, respectively. With these materials, it is possible to detect the breathing of the patient, which in the case of not detecting a signal over a few minutes can trigger an alarm locally, providing valuable time. Also, in this article, we have sent breathing signals locally and remotely to distances up to 20 km via Wi-Fi and LoRa, the same as warning signals in the case of detecting anomalies. This work reveals the use of TENGs in smart face masks as an important tool to be used in difficult epidemiological periods to the general public, bringing much more comfort and relaxation to patients and elderly in today's society, and based on pristine eco-friendly materials.

A novel thermotropic elastomer based on highly-filled LDH-SSB composites.

Elastomeric composites are prepared based on solution styrene butadiene elastomer and zinc-aluminium layered double hydroxides (LDH), using a conventional sulphur cure system. Up to 100 parts per hundred rubber of LDH are incorporated into the elastomer matrix. The composites exhibit an interesting phenomenon of thermoreversible transparency, i.e. the transparent sample becomes opaque at warm condition and restores the transparency at room temperature. The transparency is found to be increased as the amount of LDH was increased. The addition of LDH gradually improved the mechanical, dynamic mechanical performance and thermal stability of the base elastomer. These developped elastomers could be utilised as smart materials in different applications.

Development of multifunctional highly-efficient bio-based fire-retardant poly(lactic acid) composites for simultaneously improving thermal, crystallization and fire safety properties.

Currently, it is still a huge challenge to prepare high performance eco-friendly poly(lactic acid) (PLA) with high thermal stability, good processability, excellent crystallization behavior, good transparency and highly-efficient fire safety. In this paper, a novel bio-based nucleation agent N-(furan-2-ylmethyl)-P,P-diphenylphosphinic amide (FPPA) was prepared and used for the fabrication of fire safety PLA/FPPA composites. The chemical structure of FPPA was measured by FTIR, NMR and MS. Further, the crystallization behavior, thermal stability, fire safety and mechanical properties of PLA/FPPA composites were performed by TGA, DSC, polarization microscope, LOI, UL94, cone calorimeter, DMA and, SEM, Raman, GC-MS, and TGA-FTIR. The results showed that the multifunctional FPPA not only had a high thermal stability and was a good nucleation agent for PLA. Moreover, only loading of 3 wt% FPPA increased the LOI of PLA from 19.0 to 33.8 % with UL-94 V-0 classification. Furthermore, the heat release rate and total heat release values of PLA/3%FPPA composite reduced by 6.3 % and 15.3 % in cone-calorimeter test. Such high fire safety was mainly attributed to specific fire safety radicals due to thermal degradation of FPPA to interrupt composites burning in gas phase. Besides, transparency and mechanical properties were almost not changed because of low loading of FPPA in PLA. This multifunctional bio-based fire-retardant for PLA with good comprehensive performance promises broad application in engineering electronics, automobiles, 3D printing and construction materials.

Sodium alginate and Chitosan aided design of form-stable Polyrotaxane based phase change materials with ultra-high latent heat.

We prepared a series of highly porous Polyrotaxane/sodium alginate, and Polyrotaxane/Chitosan foam alloys according to a sustainable pathway by using water as the only solvent. The foam alloys were further used as supporter materials for poly (ethylene glycol) (PEG) encapsulation, to fabricate shape-stable bio-based phase change materials (PCMs). The pore morphology and the internal interface between PEG and foam alloys were characterized by scanning electron microscope (SEM). Due to the good compatibility between foam alloys and PEG, the PCM performed perfect anti-leakage properties. The introduction of sodium alginate or Chitosan ensures the shape stability of the PCMs during the phase transition. The PCMs performed good cycle stability and showed ultra-high latent heat (171.6 J g-1-189.5 J g-1). Finally, we compared the typical indicators of this work with those reported in the literature, and the comparison highlighted that the present PCMs have the significant advantages: high melting enthalpy, convenient preparation and outstanding sustainability. Notably, the work provided a sustainable idea for the design of anti-leakage and shape-stable PEG-based PCMs.

Synthesis of organo cobalt-aluminum layered double hydroxide via a novel single-step self-assembling method and its use as flame retardant nanofiller in PP.

Synthesis of polypropylene/organo-layered double hydroxide (PP/OLDH) has been carried out based on self-assembled organocobalt-aluminum LDH (O-CoAl-LDH). The novel method of synthesizing self-assembled CoAl-LDH and its characterization have also been reported in details. This method is proven to be very efficient way of producing OLDH in a single step with homogeneous composition and structure. As flame-retardant nanofiller, O-CoAl-LDH shows significant decrease in heat release rate (HRR), the total heat release (THR) and the heat release capacity (HRC) of the PP composites, though the thermal stability of the compounds decreases slightly compared to the base polymer. Morphological analyses show that the LDH particles are dispersed in PP matrix in a partially exfoliated form. The activation energy calculation based on the Kissinger method reveals that O-CoAl-LDH has a positive effect on the activation energy of thermal decomposition of PP. However, in the presence of this filler, decomposition of the composites starts at an earlier stage than that of pure PP.

Fabrication of low-fire-hazard flexible poly (vinyl chloride) via reutilization of heavy metal biosorbents.

As a naturally abundant biopolymer, chitosan is considered to be a suitable adsorbent for stannate (SnO32-) in tin plating wastewater. However, mass transfer of the adsorbent and its recycling remain challenging problems. Though flexible poly(vinyl chloride) (PVC) is highly flammable due to the addition of plasticizers, the traditional flame retardant, antimony trioxide (Sb2O3), is potentially harmful. In this study, chitosan was anchored onto the surface of PVC resin to adsorb SnO32- from wastewater. Thereafter, tin-doped chitosan-coated PVC resin was readily recycled and processed into a flexible PVC composite (modified fPVC). The limiting oxygen index value of the modified fPVC increased to 33.1%, and the peak heat release rate decreased to 161kW/m2. In addition to reducing fire hazards, this approach also decreased the content of harmful hydrogen chloride gas released during the combustion of modified fPVC. Meanwhile, the tensile properties of modified fPVC were enhanced compared with those of the Sb2O3-treated sample. These results indicated the synthesis of an eco-friendly Sb2O3-free flexible PVC composite that poses a low fire hazard.

[Treatment of osteoporotic vertebral compression fractures by ballon kyphoplasty].

OBJECTIVE: To explore the clinical efficacy and safety of balloon kyphoplasty for the aged osteoporotic vertebral compression fractures. METHODS: From June 2006 to August 2009, balloon kyphoplasty was performed on 26 patients (30 vertebral bodies), who presented painful vertebral compression fractures. They were 10 males and 16 femals, with an average age of 70 years ranging from 59 to 78 years. The operative segments were 4 cases in T11 vertebraes, T12 in 10, L1 in 12, L2 in 3, L4 in 1. The reduction of compressed vertebrae was displayed by X-ray, and the patients were followed up by observation of the visual analog scale and complications. RESULTS: All cases had rapid, significant and sustained improvements in postoperative pain following balloon kyphoplasty. Visual analog scale was reduced from (8.6 +/- 0.2) to (2.0 +/- 0.3) points. The anterior and midline vertebral body heights in 30 fractured vertebral bodies increased from pre-operative (18.34 +/- 3.25) mm, (14.36 +/- 2.56) mm up to pro-operative (20.51 +/- 1.34) mm, (19.66 +/- 1.28) mm (P < 0.05) respectively. No severe leakage occured. CONCLUSION: Balloon kyphoplasty in treatment of osteoporotic vertebral compression fractures can restore the height of fractured vertebra, relieve pain and improve the spinal function with satisfactory clinical outcomes.