Oral microbiota dysbiosis alters chronic restraint stress-induced depression-like behaviors by modulating host metabolism.

Studies have shown that the microbiota-gut-brain axis is highly correlated with the pathogenesis of depression in humans. However, whether independent oral microbiome that do not depend on gut microbes could affect the progression of depression in human beings remains unclear, neither does the presence and underlying mechanisms of the microbiota-oral-brain axis in the development of the condition. Hence this study that encompasses clinical and animal experiments aims at investigating the correlation between oral microbiota and the onset of depression via mediating the microbiota-oral-brain axis. We compared the oral microbial compositions and metabolomes of 87 patients with depressive symptoms versus 70 healthy controls. We found that the oral microbial and metabolic signatures were significantly different between the two groups. Significantly, germ-free (GF) mice transplanted with saliva from mice exposing to chronic restraint stress (CRS) displayed depression-like behavior and oral microbial dysbiosis. This was characterized by a significant differential abundance of bacterial species, including the enrichment of Pseudomonas, Pasteurellaceae, and Muribacter, as well as the depletion of Streptococcus. Metabolomic analysis showed the alternation of metabolites in the plasma of CRS-exposed GF mice, especially Eicosapentaenoic Acid. Furthermore, oral and gut barrier dysfunction caused by CRS-induced oral microbiota dysbiosis may be associated with increased blood-brain barrier permeability. Pseudomonas aeruginosa supplementation exacerbated depression-like behavior, while Eicosapentaenoic Acid treatment conferred protection against depression-like states in mice. These results suggest that oral microbiome and metabolic function dysbiosis may be relevant to the pathogenesis and pathophysiology of depression. The proposed microbiota-oral-brain axis provides a new way and targets for us to study the pathogenesis of depression.

An R2R3 MYB transcription factor confers brown planthopper resistance by regulating the phenylalanine ammonia-lyase pathway in rice.

Brown planthopper (BPH) is one of the most destructive insects affecting rice (Oryza sativa L.) production. Phenylalanine ammonia-lyase (PAL) is a key enzyme involved in plant defense against pathogens, but the role of PAL in insect resistance is still poorly understood. Here we show that expression of the majority of PALs in rice is significantly induced by BPH feeding. Knockdown of OsPALs significantly reduces BPH resistance, whereas overexpression of OsPAL8 in a susceptible rice cultivar significantly enhances its BPH resistance. We found that OsPALs mediate resistance to BPH by regulating the biosynthesis and accumulation of salicylic acid and lignin. Furthermore, we show that expression of OsPAL6 and OsPAL8 in response to BPH attack is directly up-regulated by OsMYB30, an R2R3 MYB transcription factor. Taken together, our results demonstrate that the phenylpropanoid pathway plays an important role in BPH resistance response, and provide valuable targets for genetic improvement of BPH resistance in rice.

Saving 80% Polypropylene in Facemasks by Laser-Assisted Melt-Blown Nanofibers.

The ongoing coronavirus (COVID-19) pandemic requires enormous production of facemasks and related personal protection materials, thereby increasing the amount of nondegradable plastic waste. The core material for facemasks is melt-blown polypropylene (PP) fiber. Each disposable facemask consumes ∼0.7 g of PP fibers, resulting in annual global consumption and disposal of more than 1 150 000 tons of PP fibers annually. Herein, we developed a laser-assisted melt-blown (LAMB) technique to manufacture PP nanofibers with a quality factor of 0.17 Pa-1 and significantly reduced the filter's weight. We demonstrated that a standard surgical facemask could be made with only 0.13 g of PP nanofibers, saving approximately 80% of the PP materials used in commercial facemasks. Theoretical analysis and modeling were also conducted to understand the LAMB process. Importantly, nanofibers can be easily scaled up for mass production by upgrading traditional melt blown line with scanning laser-assisted melt-blown (SLAMB).

Enantiomeric Separation and Degradation of Benoxacor Enantiomers in Horticultural Soil by Normal-Phase and Reversed-Phase High Performance Liquid Chromatography.

The separation of benoxacor enantiomers on six commercial chiral columns was investigated by high-performance liquid chromatography (HPLC) under normal-phase and reversed-phase conditions. The mobile phases included hexane/ethanol, hexane/isopropanol, acetonitrile/water, and methanol/water. The effects of the chiral stationary phases (CSPs), temperature, and mobile phase composition and ratio on the separation of benoxacor enantiomers were examined. Under normal-phase conditions, the two benoxacor enantiomers were completely separated on Chiralpak AD, Chiralpak IC, Lux Cellulose-1, and Lux Cellulose-3 columns and partially separated on a Lux Cellulose-2 column. Under reversed-phase conditions, benoxacor enantiomers were completely separated on a Lux Cellulose-3 column and partially separated on Chiralpak IC and Lux Cellulose-1 columns. Normal-phase HPLC performed better than reversed-phase HPLC for the separation of benoxacor enantiomers. As the column temperature increased from 10 °C to 4 °C, the enthalpy (ΔH) and entropy (ΔS) results indicated that the resolution was strongly affected by the temperature and that the lowest temperature did not always produce the best resolution. An optimized separation method on the Lux Cellulose-3 column was used to investigate the stability of benoxacor enantiomers in solvents and the degradation of benoxacor enantiomers in three types of horticultural soil. Benoxacor enantiomers were stable, and degradation or racemization were not observed in methanol, ethanol, isopropanol, acetonitrile, hexane, or water (pH = 4.0, 7.0, and 9.0). In three horticultural soils, the degradation rate of S-benoxacor was faster than that of R-benoxacor, resulting in soil enrichment with R-benoxacor. The results of this study will help to improve the risk assessment of enantiomer levels of benoxacor in the environment.

Prognostic comparison of transoral laser microsurgery for early glottic cancer with or without anterior commissure involvement: A meta-analysis.

OBJECTIVES: Transoral laser microsurgery (TLM) has gradually gained approval in the treatment of early glottic cancer. However, the oncological outcomes of TLM for glottic cancer with anterior commissure (AC) involvement are still a controversial topic. We aimed to systematically review the literature on glottic cancer (Tis-T2) with patients who received TLM as first choice therapy and to evaluate several prognostic outcomes in patients with or without AC involvement. METHODS: A systematic literature retrieval was conducted in PubMed, Medline (Ovid) and Web of Science. Risk ratio (RR) between AC involvement (AC+) or without AC involvement (AC-) was assessed and 95% confidence interval(95%CI) was calculated, which was performed on RevMan 5.3. RESULTS: A total of 20 literatures were included when comparing the local recurrence (LR) rate of patients with or without AC involvement, and the results suggested LR matters in group AC+ over group AC- (RR = 2.39, 95%CI = 1.99-2.86, p < 0.00001). The 5-year overall survival(5yOS) rate included 10 studies, and there was no significant difference between AC+ and AC- (RR = 0.98, 95%CI = 0.93-1.02, p = 0.35). The laryngeal preservation rate (LPR) of AC+ was lower than that of AC- (RR = 0.97, 95%CI = 0.94-1.00, p = 0.04). CONCLUSION: The results indicate that the prognosis of early glottic cancer with AC involvement is more likely to have higher local recurrence and lower LPR but no statistical difference in 5yOS rate.

Comb-like amphiphilic copolymers bearing acetal-functionalized backbones with the ability of acid-triggered hydrophobic-to-hydrophilic transition as effective nanocarriers for intracellular release of curcumin.

The pH-responsive micelles have enormous potential as nanosized drug carriers for cancer therapy due to their physicochemical changes in response to the tumor intracellular acidic microenvironment. Herein, a series of comb-like amphiphilic copolymers bearing acetal-functionalized backbone were developed based on poly[(2,4,6-trimethoxybenzylidene-1,1,1-tris(hydroxymethyl) ethane methacrylate-co-poly(ethylene glycol) methyl ether methacrylate] [P(TTMA-co-mPEGMA)] as effective nanocarriers for intracellular curcumin (CUR) release. P(TTMA-co-mPEGMA) copolymers with different hydrophobic-hydrophilic ratios were prepared by one-step reversible addition fragmentation chain transfer (RAFT) copolymerization of TTMA and mPEGMA. Their molecular structures and chemical compositions were confirmed by (1)H NMR, Fourier transform infrared spectroscopy (FT-IR) and gel permeation chromatography (GPC). P(TTMA-co-mPEGMA) copolymers could self-assemble into nanosized micelles in aqueous solution and displayed low critical micelle concentration (CMC). All P(TTMA-co-mPEGMA) micelles displayed excellent drug loading capacity, due to the strong π-π conjugate action and hydrophobic interaction between the PTTMA and CUR. Moreover, the hydrophobic PTTMA chain could be selectively hydrolyzed into a hydrophilic backbone in the mildly acidic environment, leading to significant swelling and final disassembly of the micelles. These morphological changes of P(TTMA-co-mPEGMA) micelles with time at pH 5.0 were determined by DLS and TEM. The in vitro CUR release from the micelles exhibited a pH-dependent behavior. The release rate of CUR was significantly accelerated at mildly acidic pH of 4.0 and 5.0 compared to that at pH 7.4. Toxicity test revealed that the P(TTMA-co-mPEGMA) copolymers exhibited low cytotoxicity, whereas the CUR-loaded micelles maintained high cytotoxicity for HepG-2 and EC-109 cells. The results indicated that the novel P(TTMA-co-mPEGMA) micelles with low CMC, small and tunable sizes, high drug loading, pH-responsive drug release behavior, and good biocompatibility may have potential as hydrophobic drug delivery nanocarriers for cancer therapy with intelligent delivery.

[Effects of maternal exposure to nano-alumina during pregnancy on neurodevelopment in offspring mice].

OBJECTIVE: To observe the effects of maternal exposure to nano-alumina during pregnancy on the neurodevelopment in offspring mice. METHODS: Female ICR mice began to be exposed to nano-alumina 10 d before mating, and the nano-alumina exposure lasted till offspring mice were born. All the female mice were randomly divided into 5 groups: solvent control group (saline), nano-carbon group (11.76 mg/ml), micro-alumina group (50 mg/ml), 50 nm alumina group (50 mg/ml), and 13 nm alumina group (50 mg/ml). All the mice were treated by nasal drip (10 µl/time) 3 times daily till offspring mice were born. Physiological indices, reflex and sensory function test, endurance test, Morris water maze test, positioning and navigation test, and open field test were used to evaluate the neurodevelopment of newborn mice. RESULTS: On day 28, the body weight of 13 nm alumina group (16.73±4.04 g) was significantly lower than that of solvent control group (20.45±2.50 g) (P<0.01); the 13 nm alumina group had significantly delayed time to ear opening compared with the solvent control group (4.91±0.78 d vs 4.45±0.50 d, P<0.01); compared with the solvent control group, the nano-carbon group, micro-alumina group, 50 nm alumina group, and 13 nm alumina group had significantly delayed time to eruption of teeth (10.05±0.23 d vs 10.32±0.48 d, 10.75±0.45 d, 10.32±0.47 d, and 10.79±0.49 d, P<0.05 or P<0.01). On days 4 and 7 after birth, compared with the solvent control group, other groups had significantly decreased proportions of mice which passed the cliff avoidance test (P < 0.05 or P < 0.01). On days 12 and 14 after birth, compared with the solvent control group, the nano-carbon group, 50 nm alumina group, and 13 nm alumina group had significantly reduced pre-suspension time in the endurance test (P < 0.05 or P < 0.01). The Morris water maze and positioning and navigation tests showed that the 13 nm alumina group had a significantly increased 5 d incubation period compared with the solvent control group (P < 0.05); compared with the solvent control group, other groups had significantly reduced numbers of platform crossings (P < 0.05 or P < 0.01). The open field test showed that the nano-carbon group and 13 nm alumina group had reduced numbers of rearings compared with the solvent control group (P < 0.05); compared with the solvent control group, other groups had significantly reduced numbers of modifications (P < 0.01). CONCLUSION: Maternal exposure to nano-alumina (13 nm) during pregnancy has inhibitory effects on the physical development and early behavioral development in newborn mice and can also inhibit the learning and memory abilities and adaptability to new environment in offspring mice. The neurodevelopmental toxicity of nano-alumina to newborn mice increases as the particle sizes of nano-alumina decrease, which has been demonstrated by the endurance test and number of rearings.

Ultrathin mesoporous BiOCl nanosheets-mediated liposomes for photoelectrochemical immunoassay with in-situ signal amplification.

Designing new biochemical sensors and achieving selectivity and high-sensitivity analysis is one of main research directions for immunoassays. Herein, a liposome-amplification photoelectrochemical (PEC) immunoassay was developed using ultrathin mesoporous bismuth chloride oxide nanosheets (BiOCl MSCN) for the highly selective and sensitive detection of carcinoembryonic antigen (CEA). Based on good photocurrent response of BiOCl MSCN toward dopamine, a liposome-conjugated secondary antibody loaded with dopamine was added for specific recognition in the presence of CEA. After the lysis treatment, the liberated dopamine was injected into the three-electrode electrolytic cell to enhance the photocurrent of BiOCl MSCN. Under the optimized conditions, the constructed liposome-mediated PEC immunoassay showed high sensitivity against CEA, with a dynamic response in the linear range of 0.05 ng mL-1 to 100 ng mL-1 and a detection limit of 35 pg mL-1. The present study proposes a new approach to the liposome-mediated PEC immunoassay constructed on ultrathin mesoporous BiOCl nanosheets, which can be used to target further the study of the sensing mechanism.

High-strength and high-toughness ECM films with the potential for peripheral nerve repair.

Extracellular matrix (ECM) scaffolds are widely applied in the field of regeneration as the result of their irreplaceable biological advantages, and the preparation of ECM scaffolds into ECM hydrogels expands the applications to some extent. However, weak mechanical properties of current ECM materials limit the complete exploitation of ECM's biological advantages. To enable ECM materials to be utilized in applications requiring high strength, herein, we created a kind of new ECM material, ECM film, and evaluated its mechanical properties. ECM films exhibited outstanding toughness with no cracks after arbitrarily folding and crumpling, and dramatically high strength levels of 86 ± 17.25 MPa, the maximum of which was 115 MPa. Such spectacular high-strength and high-toughness films, containing only pure ECM without any crosslinking agents and other materials, far exceed current pure natural polymer gel films and even many composite gel films and synthetic polymer gel films. In addition, both PC12 cells and Schwann cells cultured on the surface of ECM films, especially Schwann cells, showed good proliferation, and the neurite outgrowth of the PC12 cells was promoted, indicating the application potential of ECM film in peripheral nerve repair.

[Preparation of a zinc porphyrinated nanofibrous membrane and its ammonia sensing property].

OBJECTIVE: To prepare a zinc porphyrinated polyimide nanofibrous membrane for rapid detection of trace amount of ammonia. METHODS: Zinc porphyrin chromophore was copolymerized into polyimide backbones and the according nanofibrous membrane was prepared by electrospinning technique. Ammonia detection was achieved by recording the color and spectral changes of the membrane before and after exposing to the target gas. The sensitivity, selectivity and detection limit of prepared membrane were further studied. RESULTS: The obtained nanofibrous membrane preserved typical photophysical properties of zinc porphyrin chromophores. When exposed to ammonia, a dual chromo and spectrum responses of the nanofibrous membrane were observed. The binding affinity constant and the detection limit of zinc porphyrinated polyimide nanofibrous membrane calculated from surface plasmon resonance (SPR) analysis and UV-vis were 3.33 X10³ L/mol and 3.13 mg/m³, respectively. CONCLUSION: The membrane prepared in this study exhibits good sensitivity, selectivity and reproducibility towards ammonia detection.

Stepwise Energy Transfer: Near-Infrared Persistent Luminescence from Doped Polymeric Systems.

Organic near infrared (NIR) persistent-luminescence systems with bright and long-lived emission are highly valuable for applications in communication, imaging, and sensors. However, realizing these materials (especially lifetime over 0.1 s) is a challenge, mainly because of non-radiative quenching of their long-lived excitons. Herein, a universal strategy of stepwise Förster resonance energy transfer (FRET) for a bright NIR system with remarkable persistent luminescence (up to 0.2 s at 810 nm) is presented, based on a new triphenylene-dye-doped polymer (triphenylene-2-ylboronic acid@poly(vinyl alcohol) (TP@PVA)) with a persistent blue phosphorescence of 3.29 s. This persistent NIR luminescence is demonstrated for application not only in NIR anti-counterfeiting but also NIR bioimaging with penetrating a piece of skin as thick as 2.0 mm. By co-doping a red dye (such as Nile red) and an NIR dye Cyanine 7 (Cy7) into this doped PVA film, the shortage of spectral overlap between TP emission and Cy7 absorbance is successfully solved, through a stepwise FRET process involving triplet to singlet (TS)-FRET from TP to the intermediate red dye and then singlet to singlet (SS)-FRET to Cy7. It is noted that the efficiency of the upper TS-FRET is enhanced significantly by the lower SS-FRET, leading to high efficiencies for the continuous FRETs.

Preparation of bioactive and antibacterial PMMA-based bone cement by modification with quaternary ammonium and alkoxysilane.

Bone cement based on poly(methyl methacrylate) (PMMA) powder and methyl methacrylate (MMA) liquid is a very popular biomaterial used for the fixation of artificial joints. However, there is a risk of this cement loosening from bone because of a lack of bone-bonding bioactivity. Apatite formation in the body environment is a prerequisite for cement bioactivity. Additionally, suppression of infection during implantation is required for bone cements to be successfully introduced into the human body. In this study, we modified PMMA cement with γ-methacryloxypropyltrimetoxysilane and calcium acetate to introduce bioactive properties and 2-(tert-butylamino)ethyl methacrylate (TBAEMA) to provide antibacterial properties. The long-term antibacterial activity is attributed to the copolymerization of TBAEMA and MMA. As the TBAEMA content increased, the setting time increased and the compressive strength decreased. After soaking in simulated body fluid, an apatite layer was detected within 7 days, irrespective of the TBAEMA content. The cement showed better antibacterial activity against Gram-negative E. Coli than Gram-positive bacteria; however, of the Gram-positive bacteria investigated, B. subtilis was more susceptible than S. aureus.

Biodegradable Hollow Polydopamine@manganese Dioxide as an Oxygen Self-Supplied Nanoplatform for Boosting Chemo-photodynamic Cancer Therapy.

Photodynamic therapy (PDT) has attracted extensive attention in the clinical treatment of malignant tumor. However, the acidic and hypoxic conditions of the tumor microenvironment (TME) limit the further application of PDT in the clinic. Herein, we fabricate a new nanoplatform─HPDA@MnO2@Ce6/DOX@PEG-RGD (HPMRCD)─by means of coating hollow polydopamine nanoparticles (HPDA) with manganese dioxide (MnO2), which is modified by cyclic RGD functionalized poly(ethylene glycol) (PEG) and further co-loaded with a photosensitizer, Chlorin e6 (Ce6), and a chemotherapy drug, doxorubicin (DOX). This nanoplatform could be enriched in tumor tissues, then instantly dissociated under an acidic and H2O2-rich TME. The dual-responsive release of Mn2+ ions and oxygen (O2) can relieve tumor hypoxia, which can be used as a magnetic resonance contrast agent and the latter can enhance the PDT effect. Furthermore, the degradation of HPMRCD leads to an efficient loaded therapeutic molecule release, thus yielding a potential therapy to enhance tumor suppression by adopting the combined chemo-photodynamic therapy.

Reliability and Validity of General Health Questionnaire-12 in Chinese Dental Healthcare Workers During the COVID-19 Pandemic.

BACKGROUND: The General Health Questionnaire-12 (GHQ-12) is a widely used instrument to assess mental health status. However, little is known about its applicability in Chinese healthcare workers. This study aimed to evaluate the reliability and validity of the GHQ-12 in Chinese dental healthcare workers. METHODS: Dental healthcare workers participated in the first occupational survey in China conducted by the Chongqing Stomatological Association from February 2021 to March 2021 by filling out GHQ-12. The reliability and validity of GHQ-12 were then tested. RESULTS: A total of 3,020 valid electronic questionnaires were acquired. The positive detection rate of self-reported mental health status was 23.80% (719/3,020). The Cronbach's α coefficient of the GHQ-12 was 0.892, and the Cronbach's α coefficient was 0.877-0.888 after the deletion of individual items, and the split-half reliability was 0.843. The correlation coefficient between the item-total score ranged from 0.465 to 0.762 (P<0.05). The exploratory factor analysis found 2 common factors with a factor load of 0.564-0.818. The confirmatory factor analysis showed that the factor load on the specified items was 0.480-0.790. CONCLUSIONS: The two-factor model of GHQ-12 featured good reliability and validity, which could be used to assess the mental health status of Chinese dental healthcare workers.

Biocatalytic synthesis and in vitro release of biodegradable linear polyesters with pendant ketoprofen.

Enzyme-catalyzed polycondensation for the synthesis of polyester prodrugs of ketoprofen was reported. Lipase acrylic resin from Candida antarctica (CAL-B) was used to synthesize the linear polyesters with pendent ketoprofen groups based on ketoprofen glycerol ester, poly(ethylene glycol), and divinyl sebacate. The products were characterized by GPC and (1)H NMR. The results indicated that the molecular weight and yields of the polyesters depend on experimental conditions such as temperature and feed ratio. The in vitro study showed that the drug release from the polyester was slow under physiological conditions, which indicated that the polyester could be a promising prodrug with extended pharmacological effects by delayed release of ketoprofen.

Technical note: factors affecting dose distribution in the overlap region of two-segment total body irradiation by helical tomotherapy.

OBJECTIVE: To assess the effects of various treatment planning parameters to identify the optimal gap distance for precise two-segment total body irradiation (TBI) using helical tomotherapy (HT) with fixed jaw mode. METHODS AND MATERIALS: Data of a treatment plan for 8 acute leukemia patients (height range: 109-130 cm) were analyzed. All patients underwent total-body computed tomography (CT) with 5-mm slice thickness. A lead wire, placed at 10 cm above the patella, was used to mark the boundary between the two segments. Target volumes and organs at risk were delineated using a Varian Eclipse 10.0 physician's workstation. Different distances between the lead wire and the boundary of the two targets were used. CT images were transferred to the HT workstation to design the treatment plans, by adjusting parameters, including the field width (FW; 2.5 cm, and 5 cm), pitch (0.287 and 0.430), modulation factor (1.8). The plans were superimposed to analyze the dose distributions in the overlap region when varying target gap distances, FWs, pitches to determine the optimal combinations. RESULTS: The pitch did not affect the dose distribution in the overlap region. The dose distribution in the overlap region was mostly homogeneous when the target gap distance was equal to the FW. Increased FW diminished the effect of the target gap distance on the heterogeneous index of the overlap region. CONCLUSIONS: In two-segment TBI treatments by HT with Helix mode, a gap distance equal to the FW may achieve optimal dose distribution in the overlap region.

Carbon quantum dots encapsulated in super small platinum nanocrystals core-shell architecture/nitrogen doped graphene hybrid nanocomposite for electrochemical biosensing of DNA damage biomarker-8-hydroxy-2'-deoxyguanosine.

In this work, carbon quantum dots (CQD) encapsulated in super small platinum nanocrystals core-shell architecture/nitrogen doped graphene hybrid nanocomposite (CQD@PDA@PtNCs-NGR) was design synthesized. Without using any capping reagent, stabilizer and surfactant, very small CQD was served as template and anchoring point for the synthesis of Pt NCs with a super small size (2.25 nm) and a uniform distribution. Meanwhile, dopamine (DA) was used as bridging agent, positioning agent and weak reducing agent to make Pt2+ grow on the CQD. Combine the high dispersed Pt NCs with high specific surface area and high conductivity of NGR, the CQD@PDA@PtNCs-NGR shows excellent electrocatalytic performance towards the biosensing of DNA damage biomarker- 8-Hydroxy-2'-deoxyguanosine (8-OH-dG). A very low detection limit of 0.45 nM and 0.85 nM (S/N = 3), a wide linear range of 0.013 µM-109.78 µM and a high sensitivity of 7.912 µA µM-1cm-2 and 4.190 µA µM-1cm-2 were obtained. The fabricated CQD@PDA@PtNCs-NGR realized the detection of 8-OH-dG in human urine practical sample. Furthermore, CQD@PDA@PtNCs-NGR was applied for the determination of 8-OH-dG generated from damaged DNA and damaged guanine (G), respectively. This work effectively combines the electrochemical signal of 8-OH-dG with DNA damage, confirms the mechanism of DNA damage, which might pave a new way to establish the associations between degree of DNA damage and 8-OH-dG.

Highly regioselective enzymatic synthesis of polymerizable derivatives of methyl shikimate.

Regiocontrollable selectivity of enzymatic method for synthesis of polymerizable derivatives of methyl shikimate was described. Lipase acrylic resin from Candida antarctica (CAL-B) and immobilized lipase from Mucor miehei (MML) showed high regioselectivity toward the secondary hydroxyl of methyl shikimate, which presents three hydroxyl groups with similar reactivity. Catalysis by MML in acetone facilitated the single step synthesis of 5-O-acyl methyl shikimate derivatives in high yields, while the use of CAL-B in acetone afforded 4-O-acyl methyl shikimate derivatives. The obtained series of methyl shikimate derivatives would be important monomers for potential useful analogues of shikimic acid.

Preparation and evaluation of paclitaxel-imprinted polymers with a rosin-based crosslinker as the stationary phase in high-performance liquid chromatography.

In this study, molecularly imprinted polymer (MIP) microspheres for paclitaxel (PTX) were prepared by microsuspension polymerization and used as a stationary phase in high-performance liquid chromatography (HPLC) for the separation of PTX and its structural analog docetaxel (DOC). For MIP synthesis, ethylene glycol maleic rosinate acrylate and 2-vinylpyridine were used as the cross-linker and functional monomer, respectively. MIP microspheres were characterized by scanning electron microscopy, laser granulometry, nitrogen sorption porosimetry, and thermogravimetric analysis. Results indicated the formation of regular MIPs with an even pore size distribution; furthermore, these MIPs exhibited excellent thermal stability. These MIP microspheres were packed into a stainless steel column for the selective separation of PTX and DOC. Under optimum chromatographic conditions, a separation factor of 2.54 and an imprinting factor of 2.37 were obtained. In addition, thermodynamic data obtained from van't Hoff plots revealed enthalpy-driven separation and higher contribution from functional group interactions as compared with that from steric complementary interactions. Microcalorimetry was employed to investigate the binding mechanisms of the analytes on the MIP surface.

Electrospray formation of gelled nano-aluminum microspheres with superior reactivity.

Nanometallic fuels with high combustion enthalpy, such as aluminum, have been proposed as a potential fuel replacement for conventional metallic fuel to improve propellant performance in a variety of propulsive systems. Nevertheless, nanometallic fuels suffer from the processing challenges in polymer formulations such as increased viscosity and large agglomeration, which hinder their implementation. In this letter, we employ electrospray as a means to create a gel within a droplet, via a rapid, solvent evaporation-induced aggregation of aluminum nanoparticles, containing a small mass fraction of an energetic binder. The gelled aluminum microspheres were characterized and tested for their burning behavior by rapid wire heating ignition experiments. The gelled aluminum microspheres show enhanced combustion behavior compared to nanoaluminum, which possibly benefits from the nitrocellulose coating and the gelled microstructure, and is far superior to the corresponding dense micrometer-sized aluminum.