Building microbial consortia to enhance straw degradation, phosphorus solubilization, and soil fertility for rice growth.

Straw pollution and the increasing scarcity of phosphorus resources in many regions of China have had severe impacts on the growing conditions for crop plants. Using microbial methods to enhance straw decomposition rate and phosphorus utilization offers effective solutions to address these problems. In this study, a microbial consortium 6 + 1 (consisting of a straw-degrading bacterium and a phosphate-solubilizing bacterium) was formulated based on their performance in straw degradation and phosphorus solubilization. The degradation rate of straw by 6 + 1 microbial consortium reached 48.3% within 7 days (The degradation ability was 7% higher than that of single bacteria), and the phosphorus dissolution rate of insoluble phosphorus reached 117.54 mg·L- 1 (The phosphorus solubilization ability was 29.81% higher than that of single bacteria). In addition, the activity of lignocellulosic degrading enzyme system was significantly increased, the activities of endoglucanase, ß-glucosidase and xylanase in the microbial consortium were significantly higher than those in the single strain (23.16%, 28.02% and 28.86%, respectively). Then the microbial consortium was processed into microbial agents and tested in rice pots. The results showed that the microbial agent significantly increased the content of organic matter, available phosphorus and available nitrogen in the soil. Ongoing research focuses on the determination of the effects and mechanisms of a functional hybrid system of straw degradation and phosphorus removal. The characteristics of the two strains are as follows: Straw-degrading bacteria can efficiently degrade straw to produce glucose-based carbon sources when only straw is used as a carbon source. Phosphate-solubilizing bacteria can efficiently use glucose as a carbon source, produce organic acids to dissolve insoluble phosphorus and consume glucose at an extremely fast rate. The analysis suggests that the microbial consortium 6 + 1 outperformed individual strains in terms of both performance and application effects. The two strains within the microbial consortium promote each other during their growth processes, resulting in a significantly higher rate of carbon source consumption compared to the individual strains in isolation. This increased demand for carbon sources within the growth system facilitates the degradation of straw by the strains. At the same time, the substantial carbon consumption during the metabolic process generated a large number of organic acids, leading to the solubilization of insoluble phosphorus. It also provides a basis for the construction of this type of microbial consortium.

Clopidogrel with indobufen or aspirin in minor ischemic stroke or high-risk transient ischemic attack: a randomized controlled clinical study.

BACKGROUND: Ischemic stroke and transient ischemic attack (TIA) are the most prevalent cerebrovascular diseases. The conventional antiplatelet drugs are associated with an inherent bleeding risk, while indobufen is a new antiplatelet drug and has the similar mechanism of antiplatelet aggregation as aspirin with more safety profile. However, there have been no studies evaluating the combination therapy of indobufen and clopidogrel for antiplatelet therapy in cerebrovascular diseases. OBJECTIVE: The CARMIA study aims to investigate the effectiveness and safety of a new dual antiplatelet therapy consisting of indobufen and clopidogrel comparing with the conventional dual antiplatelet therapy consisting of aspirin and clopidogrel in patients with minor ischemic stroke or high-risk TIA. METHODS: An open-label randomized controlled clinical trial was conducted at a clinical center. We randomly assigned patients who had experienced a minor stroke or transient ischemic attack (TIA) within 72 h of onset, or within 1 month if they had intracranial stenosis (IS), to receive either indobufen 100 mg twice daily or aspirin 100 mg once daily for 21 days. For patients with IS, the treatment duration was extended to 3 months. All patients received a loading dose of 300 mg clopidogrel orally on the first day, followed by 75 mg once daily from the second day to 1 year. We collected prospective data using paper-based case report forms, and followed up on enrolled patients was conducted to assess the incidence of recurrent ischemic stroke or TIA, mRS score, NIHSS (National Institutes of Health Stroke Scale) score, and any bleeding events occurring within 3 month after onset. RESULTS: We enrolled 202 patients diagnosed with ischemic stroke or transient ischemic attack. After applying the criteria, 182 patients were eligible for data analysis. Endpoint events (recurrence of ischemic stroke/TIA, myocardial infarction, or death) were observed in 6 patients (6.5%) receiving aspirin and clopidogrel, including 4 (4.3%) with stroke recurrence, 1 (1.1%) with TIA recurrence, and 1 (1%) with death. In contrast, no endpoint events were reported in the indobufen and clopidogrel group (P = 0.029). The group of patients receiving indobufen and clopidogrel exhibited significantly lower modified Rankin Scale (mRS) score. (scores range from 0 to 6, with higher scores indicating more severe disability) compared to the aspirin and clopidogrel group (common odds ratio 3.629, 95% CI 1.874-7.036, P < 0.0001). Although the improvement rate of NIHSS score in the indobufen and clopidogrel group was higher than that in the aspirin and clopidogrel group, the difference was not statistically significant (P > 0.05). Bleeding events were observed in 8 patients (8.6%) receiving aspirin and clopidogrel, including 4 (4.3%) with skin bleeding, 2 (2.2%) with gingival bleeding, 1 (1.1%) with gastrointestinal bleeding, and 1 (1.1%) with urinary system bleeding. On the other hand, only 1 patient (1.1%) in the indobufen and clopidogrel group experienced skin bleeding (P = 0.035). CONCLUSION: The combination of indobufen and clopidogrel has shown non-inferior and potentially superior effectiveness and safety compared to aspirin combined with clopidogrel in patients with minor ischemic stroke and high-risk TIA in the CARMIA study (registered under chictr.org.cn with registration number ChiCTR2100043087 in 01/02/2021).

Estimate of the degradation potentials of cellulose, xylan, and chitin across global prokaryotic communities.

Complex polysaccharides (e.g. cellulose, xylan, and chitin), the most abundant renewable biomass resources available on Earth, are mainly degraded by microorganisms in nature. However, little is known about the global distribution of the enzymes and microorganisms responsible for the degradation of cellulose, xylan, and chitin in natural environments. Through large-scale alignments between the sequences released by the Earth Microbiome Project and sequenced prokaryotic genomes, we determined that almost all prokaryotic communities have the functional potentials to degrade cellulose, xylan, and chitin. The median abundances of genes encoding putative cellulases, xylanases, and chitinases in global prokaryotic communities are 0.51 (0.17-1.01), 0.24 (0.05-0.57), and 0.33 (0.11-0.71) genes/cell, respectively, and the composition and abundance of these enzyme systems are environmentally varied. The taxonomic sources of the three enzymes are highly diverse within prokaryotic communities, and the main factor influencing the diversity is the community's alpha diversity index rather than gene abundance. Moreover, there are obvious differences in taxonomic sources among different communities, and most genera with degradation potentials are narrowly distributed. In conclusion, our analysis preliminarily depicts a panorama of cellulose-, xylan-, and chitin-degrading enzymatic systems across global prokaryotic communities.

PS microspheres coated by AuNPs via thermodynamic driving heterocoagulation and their high catalytic activity.

A unique method of fabricating PS/AuNPs composite particles in ex situ mode is proposed on the basis of thermodynamically driving mechanism. It is facile and versatile as it eliminates the need for surface functionalizations and modifications of both PS microspheres and AuNPs. The PS/AuNPs composite particles take on a raspberry-like morphology with controllable coverage according to some thermodynamic factors, which have been extensively characterized by scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. More importantly, the PS/AuNPs composite particles hold higher catalytic efficiency and better repeatability than the previously reported results, which are confirmed in two oxidation-reduction reactions of 2-nitroaniline/NaBH(4) and rhodamine B/NaBH(4).

Effect of chronic alcohol consumption on oral microbiota in rats with periodontitis.

Background: The imbalance of oral microbiota can contribute to various oral disorders and potentially impact general health. Chronic alcohol consumption beyond a certain threshold has been implicated in influencing both the onset and progression of periodontitis. However, the mechanism by which chronic alcohol consumption affects periodontitis and its association with changes in the oral microbial community remains unclear. Objective: This study used 16S rRNA gene amplicon sequencing to examine the dynamic changes in the oral microbial community of rats with periodontitis influenced by chronic alcohol consumption. Methods: Twenty-four male Wistar rats were randomly allocated to either a periodontitis (P) or periodontitis + alcohol (PA) group. The PA group had unrestricted access to alcohol for 10 weeks, while the P group had access to water only. Four weeks later, both groups developed periodontitis. After 10 weeks, serum levels of alanine aminotransferase and aspartate aminotransferase in the rats' serum were measured. The oral swabs were obtained from rats, and 16S rRNA gene sequencing was conducted. Alveolar bone status was assessed using hematoxylin and eosin staining and micro-computed tomography. Results: Rats in the PA group exhibited more severe periodontal tissue damage compared to those in the periodontitis group. Although oral microbial diversity remained stable, the relative abundance of certain microbial communities differed significantly between the two groups. Actinobacteriota and Desulfobacterota were more prevalent at the phylum level in the PA group. At the genus level, Cutibacterium, Tissierella, Romboutsia, Actinomyces, Lawsonella, Anaerococcus, and Clostridium_sensu_stricto_1 were significantly more abundant in the PA group, while Haemophilus was significantly less abundant. Additionally, functional prediction using Tax4Fun revealed a significant enrichment of carbohydrate metabolism in the PA group. Conclusion: Chronic alcohol consumption exacerbated periodontitis in rats and influenced the composition and functional characteristics of their oral microbiota, as indicated by 16S rRNA gene sequencing results. These microbial alterations may contribute to the exacerbation of periodontitis in rats due to chronic alcohol consumption.

Conjugated microporous polymer for solid-phase extraction of neonicotinoid insecticides from environmental water samples.

Conjugated microporous polymers (CMPs) have unique characteristics and have been used in a range of fascinating applications in separation sciences. In this study, a CMP, designated as CMP-1, was synthesized via the Sonogashira-Hagihara coupling reaction using 1,3,5-triphenylbenzene and 1,4-dibromobenzene as building blocks. CMP-1 features a large surface area, abundant micropore structures, and excellent stability, making it a promising solid-phase extraction adsorbent for the efficient enrichment of neonicotinoid insecticides (NEOs). Under the optimized conditions, CMP-1 was combined with high-performance liquid chromatography and diode array detection to enable the detection of NEOs with a wide linear range (0.5-200 µg·L-1), a low detection limit (0.26-0.58 µg·L-1), and acceptable precision. The developed method was applied to determine spiked NEOs in three types of environmental water samples, with recoveries of 73.7%-112.0% and relative standard deviations of 0.6%-9.4%.

Ambient aerodynamic desorption/ionization method for microparticle mass measurement.

An ambient desorption/ionization method, named aerodynamic desorption (AD), was proposed for the in situ rapid mass measurement of microparticles. The AD method exploited the discontinuous atmospheric pressure interface (DAPI) to generate a pulsed airflow, which was used to desorb the microparticles under atmospheric pressure. Various microparticles, e.g., bacteria, cell, polystyrene, synthetic diamond, and silica particles, with different size and surface component were successfully desorbed. Similar to that in the conventional laser-induced acoustic desorption (LIAD) method, these microparticles were desorbed as precharged ions in the AD process and the charge number was largely relevant to the particle size. However, compared with LIAD, the sensitivity of the AD method was higher. A lower concentration of particles was required for the analysis. In addition, the construction and sampling process of AD source were much simpler. All types of liquid, solid, or/and gaseous samples can be directly sampled under ambient condition. As a demonstration of this AD method, the in situ mass analysis of red blood cells (RBCs) and E. coli bacteria were carried out using a homemade ambient AD mass spectrometer consisting of AD source, QIT mass analyzer, and charge detector. Their mass and mass distributions were obtained successfully.

Dual functionalization of poly(ε-caprolactone) film surface through supramolecular assembly with the aim of promoting in situ endothelial progenitor cell attachment on vascular grafts.

In this study, we developed a method for the dual functionalization of a poly(ε-caprolactone) (PCL) surface by means of the supramolecular assembly technology. Polyethylene glycol (PEG), with resistance to protein adsorption, and TPSLEQRTVYAK (TPS) peptide, which can specifically bind endothelial progenitor cells (EPCs), were immobilized on the PCL surface through host-guest inclusion complexation. The chemical composition as well as the hydrophilic/hydrophobic property of the functionalized surface was characterized by X-ray photoelectron spectroscopy and water contact angle measurements. The relative composition of two functional molecules on the dually functionalized surface was further analyzed by fluorescence quantification. Finally, the fibrinogen adsorption, platelet adhesion and activation, and selective attachment of cells were systematically evaluated on the functionalized surface. The results show that the presence of PEG evidently inhibited the adsorption of plasma protein and platelet adhesion, thus reducing the possibility of thrombus formation on the functionalized surface. At the same time, the TPS-functionalized surface demonstrated enhanced attachment toward EPC compared with the surfaces in the absence of TPS functionalization. For the surface functionalized by both PEG and TPS, the functions provided by each component have been well demonstrated. The relative composition of the PEG and TPS could be further fine-tuned by adjusting the feeding ratio. All these results indicate that the dually functionalized surface developed in this study is a suitable candidate for vascular graft to induce and promote in situ endothelialization.

Effects of biodegradable and non-biodegradable microplastics on bacterial community and PAHs natural attenuation in agricultural soils.

Anthropogenic activities such as in situ straw incineration and the widespread use of agricultural film led to the accumulation of polycyclic aromatic hydrocarbons (PAHs) and microplastics (MPs) in agricultural soils. In this study, four biodegradable MPs (BPs), including polylactic acid (PLA), polybutylene succinate (PBS), poly-ß-hydroxybutyric acid (PHB) and poly (butylene adipate-co-terephthalate) (PBAT) and non-biodegradable low-density polyethylene (LDPE) were selected as representative MPs. The soil microcosm incubation experiment was conducted to analyze MPs effects on PAHs decay. MPs did not influence PAHs decay significantly on day 15 but showed different effects on day 30. BPs reduced PAHs decay rate from 82.4% to 75.0%- 80.2% with the order of PLA < PHB < PBS < PBAT while LDPE increased it to 87.2%. MPs altered beta diversity and impacted the functions to different extents, interfering in PAHs biodegradation. The abundance of most PAHs-degrading genes was increased by LDPE and decreased by BPs. Meanwhile, PAHs speciation was influenced with bioavailable fraction elevated by LDPE, PLA and PBAT. The facilitating effect of LDPE on 30-d PAHs decay can be attributed to the enhancement of PAHs-degrading genes and PAHs bioavailability, while the inhibitory effects of BPs were mainly due to the response of the soil bacterial community.

Tinware-Inspired Aerobic Surface-Initiated Controlled Radical Polymerization (SI-Sn0CRP) for Biocompatible Surface Engineering.

Surface anchored polymer brushes prepared by surface-initiated controlled radical polymerization (SI-CRP) have raised considerable interest in biomaterials and bioengineering. However, undesired residues of noxious transition metal catalysts critically restrain their widespread biomedical applications. Herein, we present a robust and biocompatible surface-initiated controlled radical polymerization catalyzed by a Sn(0) sheet (SI-Sn0CRP) under ambient conditions. Through this approach, microliter volumes of vinyl monomers with diverse functions (heterocyclic, ionic, hydrophilic, and hydrophobic) could be efficiently converted to homogeneous polymer brushes. The excellent controllability of SI-Sn0CRP strategy is further demonstrated by the exquisite fabrication of predetermined block and patterned polymer brushes through chain extension and photolithography, respectively. Additionally, in virtue of intrinsic biocompatibility of Sn, the resultant polymer brushes present transcendent affinity toward blood and cell, in marked contrast to those of copper-based approaches. This strategy could provide an avenue for the controllable fabrication of biocompatible polymer brushes toward biological applications.

Investigation of the enhanced antitumour potency of STING agonist after conjugation to polymer nanoparticles.

Intravenously administered cyclic dinucleotides and other STING agonists are hampered by low cellular uptake and poor circulatory half-life. Here we report the covalent conjugation of cyclic dinucleotides to poly(ß-amino ester) nanoparticles through a cathepsin-sensitive linker. This is shown to increase stability and loading, thereby expanding the therapeutic window in multiple syngeneic tumour models, enabling the study of how the long-term fate of the nanoparticles affects the immune response. In a melanoma mouse model, primary tumour clearance depends on the STING signalling by host cells-rather than cancer cells-and immune memory depends on the spleen. The cancer cells act as a depot for the nanoparticles, releasing them over time to activate nearby immune cells to control tumour growth. Collectively, this work highlights the importance of nanoparticle structure and nano-biointeractions in controlling immunotherapy efficacy.

Effect of core and veneer porcelain thickness and resin cement on opalescence property of glass-ceramic veneers.

OBJECTIVES: This study aimed to analyze the effect of core and veneer porcelain thickness and resin cement on the opalescence property (OP) of glass-ceramic veneers, which were used to restore discolored teeth. METHODS: IPS e.max CAD LT A3 ceramic specimens were fabricated by computer aided design and computer aided manufacturing (CAD/CAM). The thickness values of core porcelain groups were 0.25 and 0.50 mm, and those of the core/veneer porcelain groups were 0.25 mm core/0.25 mm dentin, 0.50 mm core/0.25 mm dentin, 0.50 mm core/0.50 mm dentin, and 0.50 mm core/0.25 mm dentin/0.25 mm incisal. To simulate the clinical bonding procedure of porcelain veneer, resin cement Variolink N Bleach XL was coated at the bottom of CAD/CAM porcelain veneer specimens to make composite specimens of CAD/CAM porcelain veneer and resin cement. The L*a*b* values of specimens in the reflection and transmission pattern were measured by a spectrophotometer. Then, the OP was calculated. RESULTS: The OP values of 0.25 and 0.50 mm core porcelain groups, and 0.25 mm core/0.25 mm dentin, 0.50 mm core/0.25 mm dentin, 0.50 mm core/0.50 mm dentin, and 0.50 mm core/0.25 mm dentin/0.25 mm incisal core/veneer porcelain groups were 6.10±0.50, 7.00±0.24, 6.40±0.24, 7.08±0.28, 7.16±0.21, and 7.86±0.11 respectively. With increasing thickness of core porcelain, the OP values increased significantly (P<0.05). When 0.25 mm-thick dentin porcelain was added, no significant difference was found in the OP values of specimens with the same core porcelain thickness (P>0.05). For the 0.50 mm core porcelain group, no significant difference was found between 0.25 and 0.50 mm-thick dentin porcelain groups (P>0.05), but the OP values increased significantly after increasing the 0.25 mm incisal porcelain (P<0.05). The OP values of 0.25 mm core/0.25 mm dentin, 0.50 mm core/0.25 mm dentin, 0.50 mm core/0.50 mm dentin, and 0.50 mm core/0.25 mm dentin/0.25 mm incisal CAD/CAM porcelain veneer-resin cement composite specimens were 6.29±0.31, 7.56±0.36, 7.67±0.30, and 8.65±0.53. The OP values increased with increasing thickness of the porcelain layer (P<0.05), but no statistically signi-ficant difference was found between the groups of 0.50 mm core/0.25 mm dentin and 0.50 mm core/0.50 mm dentin (P=0.733). The influence of porcelain layer thickness and resin cement on the OP value was statistically different (P<0.05), and no interaction was found between the total thickness and the presence of resin cement (P>0.05). CONCLUSIONS: When using glass-ceramic veneers for discolored teeth, the following are recommended to improve the OP and obtain a natural and realistic effect: adopt the design of direct sintering incisal porcelain with core porcelain; appropriately increase the thickness of core porcelain; and select resin cement with opaque effect.

Galvanic-Replacement-Assisted Surface-Initiated Atom Transfer Radical Polymerization for Functional Polymer Brush Engineering.

Here we present a facile and robust strategy, namely, galvanic-replacement-assisted surface-initiated Cu(0)-mediated atom transfer radical polymerization (gr-SI-Cu0ATRP, or gr-SI-Cu0CRP) for polymer brush engineering under ambient conditions. In gr-SI-Cu0ATRP, highly active and nanostructured Cu(0) surfaces are obtained by a simple galvanic replacement on zinc/aluminum surfaces in dilute Cu2+ solution. Polymer brush growth rate is extremely high (up to ∼904 nm in 30 min polymerization); meanwhile, both nano Cu(0) surfaces and Cu2+ solution can be reused multiple times without losing grafting efficiency. We also demonstrate that the gr-SI-Cu0ATRP is advantageous for polymer brush engineering on arbitrary substrates, including flexible (polyethylene terephthalate), curved (polycarbonate), and porous (anodic aluminum oxide), and endow the substrates with various functionalities, for example, anti-icing, antifogging, and ion selectivity.

Seawater-Boosting Surface-Initiated Atom Transfer Radical Polymerization for Functional Polymer Brush Engineering.

Iron-mediated surface-initiated reversible deactivation radical polymerization (Fe0 SI-RDRP) is an appealing approach to produce robust polymer surfaces with low toxicity and biocompatibility, while its application has been limited so far due to the poor activity of iron-based catalysts. Herein, we show that the iron(0)-mediated surface-initiated atom transfer radical polymerization (Fe0 SI-ATRP) could be significantly enhanced by simply using seawater as reaction media. In comparison, there was no polymer brush formation in deionized water. This method could convert a range of monomers to well-defined polymer brushes with unparalleled speed (up to 31.5 nm min-1) and a minor amount of monomer consumption (µL). Moreover, the resultant polymer brush shows chain-end fidelity which could be exemplified by repetitive Fe0 SI-ATRP to obtain tetrablock brushes. Finally, we show the preparation of polymer-brush-gated ion-selective membranes by Fe0 SI-ATRP for osmotic energy conversion, which gives excellent power densities of 5.93 W m-2, outperforming the most reported as well as commercialized benchmark (5 W m-2).

The regeneration of macro-porous electrospun poly(ɛ-caprolactone) vascular graft during long-term in situ implantation.

Long-term evaluation of vascular grafts is an essential step to facilitate clinical translation. In this study, we investigate the long-term performance of a macro-porous poly(ɛ-caprolactone) (PCL) electrospun vascular graft using the rat abdominal artery replacement model. Long-term patency, endothelialization, and smooth muscle cell regeneration were evaluated, as well as calcification and degradation. The data showed that all the grafts remained open and unobstructed. There was no evidence of aneurysm, stenosis, or calcification one year after implantation. Importantly, neo-vessel was regenerated on the luminal surface of the graft, and was composed of a complete endothelial layer and several layers of smooth muscle cells. The neo-vessel showed vascular physiological function, although not as good as that in native blood vessels, likely due to the remaining scaffold fibers. These data indicated that the PCL macro-porous electrospun vascular graft has potential to be an artery substitute for long-term implantation. Also, this work indicates that continued efforts are needed to develop advanced vascular grafts that exhibit the appropriate balance between the regeneration of the neo-vessel and the complete degradation of the graft materials. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1618-1627, 2018.

Effect of Resveratrol on Modulation of Endothelial Cells and Macrophages for Rapid Vascular Regeneration from Electrospun Poly(ε-caprolactone) Scaffolds.

Rapid endothelialization is a key factor that determines the success of small-diameter vascular grafts as an artery substitute in the treatment of cardiovascular diseases. Aimed to facilitate vascular regeneration, we developed a vascular scaffold loaded with resveratrol, which is a natural compound extracted from plants and showed multifaceted effects in cardiovascular protection. The tubular poly(ε-caprolactone) (PCL) scaffold was prepared by electrospinning with resveratrol in the PCL solution. In vitro assay demonstrated that resveratrol could be released from the scaffolds in a sustained and controlled manner. Cell culture results indicated that the migration of endothelial cells (ECs), nitric oxide production, and the ability of tube formation increased in the resveratrol-containing PCL scaffold groups compared with the PCL control. Meanwhile, the level of tumor necrosis factor (TNF)-α, the main proinflammatory factor secreted from macrophages, was reduced, and the messenger RNA expressions of the M2 macrophage-related genes were increased in the resveratrol-containing group. Further, in vivo implantation was performed by replacing rat abdominal aorta. We observed fast endothelialization and enhanced vascular regeneration in rats with resveratrol-containing scaffolds. The presence of resveratrol also induced a large number of M2 macrophages to infiltrate into the graft wall. Taken together, the incorporation of resveratrol into the PCL grafts enhanced the vascular regeneration by modulation of ECs and macrophages.

ECM-mimetic heparin glycosamioglycan-functionalized surface favors constructing functional vascular smooth muscle tissue in vitro.

Contractile vascular smooth muscle accounts for the normal physiological function of artery. Heparin, as a native glycosaminoglycan, has been well known for its important function in promoting or maintaining the contractile phenotype of vascular smooth muscle cells (VSMCs). In this study, heparin-functionalized non-woven poly(ε-caprolactone) (PCL) mat was fabricated by a facile and efficient surface modification protocol, which enables the control of surface heparin density within a broad range. Surface heparization remarkably increased the hydrophilicity of PCL, and reduced platelet adhesion. MTT assay showed that VSMC proliferation was evidently inhibited on the heparin-functionalized PCL surface in a dose-dependent manner. Gene analysis confirmed that surface heparization also promoted the transition of VSMCs from synthetic phenotype to contractile one. Furthermore, with a proper surface density of heparin, it allowed VSMCs to grow in a certain rate, while exhibiting contractile phenotype. Culture of VSMCs on a modified PCL mat with moderate heparin density (PCL-Hep-20) for 2 days resulted in a confluent layer of contractile smooth muscle cells. These data suggest that the heparin-modified PCL scaffolds may be a promising candidate to generate functional vascular tissues in vitro.

Differences in the performance of PCL-based vascular grafts as abdominal aorta substitutes in healthy and diabetic rats.

Great progress has been made in the field of vascular tissue engineering, with some artificial vascular grafts already exhibiting promising outcomes in animal models. However, these studies were mostly conducted using healthy animals, which are not representative of actual clinical demands. Indeed, patients who require artificial vascular graft implantation are often accompanied by other comorbidities, such as hyperlipidaemia, hypertension and diabetes which should also be taken into consideration when assessing the potential of vascular grafts that are intended for clinical applications. In the present study, we established a rat model with type 2 diabetes (T2D) for performance evaluation of an electrospun PCL vascular graft. Our data showed that rats with T2D had elevated incidents of adverse event rates, including exacerbated platelet adhesion, inflammation, early calcification and impaired regeneration compared to the non-diabetic controls. Thus, we report that T2D exacerbates the regeneration process after in vivo implantation of vascular grafts. More advanced grafts are in demand for clinical use in patients with clinical complications such as T2D.

Enzyme-functionalized vascular grafts catalyze in-situ release of nitric oxide from exogenous NO prodrug.

Nitric oxide (NO) is an important signaling molecule in cardiovascular system, and the sustained release of NO by endothelial cells plays a vital role in maintaining patency and homeostasis. In contrast, lack of endogenous NO in artificial blood vessel is believed to be the main cause of thrombus formation. In this study, enzyme prodrug therapy (EPT) technique was employed to construct a functional vascular graft by immobilization of galactosidase on the graft surface. The enzyme-functionalized grafts exhibited excellent catalytic property in decomposition of the exogenously administrated NO prodrug. Localized and on-demand release of NO was demonstrated by in vitro release assay and fluorescent probe tracing in an ex vivo model. The immobilized enzyme retained catalytic property even after subcutaneous implantation of the grafts for one month. The functional vascular grafts were implanted into the rat abdominal aorta with a 1-month monitoring period. Results showed effective inhibition of thrombus formation in vivo and enhancement of vascular tissue regeneration and remodeling on the grafts. Thus, we create an enzyme-functionalized vascular graft that can catalyze prodrug to release NO locally and sustainably, indicating that this approach may be useful to develop new cell-free vascular grafts for treatment of vascular diseases.

Effect of sustained heparin release from PCL/chitosan hybrid small-diameter vascular grafts on anti-thrombogenic property and endothelialization.

Thrombus formation and subsequent occlusion are the main reasons for the failure of small-diameter vascular grafts. In this study, a hybrid small-diameter vascular graft was developed from synthetic polymer poly(ε-caprolactone) (PCL) and natural polymer chitosan (CS) by the co-electrospinning technique. Heparin was immobilized on the grafts through ionic bonding between heparin and CS fibers. The immobilization was relatively stable, and heparin could continuously release from the grafts for more than 1month. Heparin functionalization evidently improved the hemocompatibility of the PCL/CS vascular grafts, which was illustrated by the reduced platelet adhesion and prolonged coagulation time (activated partial thromboplastin time, prothrombin time and thromboplastin time) as shown in the human plasma assay, and was further confirmed by the ex vivo arteriovenous shunt experiment. In vitro cell proliferation assay showed that heparin can promote the growth of human umbilical vein endothelial cells, while moderately inhibiting the proliferation of vascular smooth muscle cells, a main factor for neointimal hyperplasia. Implantation in rat abdominal aorta was performed for 1month. Results indicate that sustained release of heparin provided optimal anti-thrombogenic effect by reducing thrombus formation and maintaining the patency. Furthermore, heparin functionalization also enhanced in situ endothelialization, thereby preventing the occurrence of restenosis. In conclusion, it provides a facile and useful technique for the development of heparinized medical devices, including vascular grafts.