The involvement of oxidative stress mediated endoplasmic reticulum pathway in apoptosis of Golden Pompano (Trachinotus blochii) liver under PS-MPs stress.

Globally, microplastics (MPs) are highly prevalent, especially in coastal areas. Unfortunately, golden pompano as a major marine fish in China is typically raised in floating marine cages near coasts, facing these MPs sources. However, toxicological studies on Golden Pompano which farm in coastal areas and face actual microplastic exposure are rare. Therefore, golden pompano were exposed to 10.0 µg/L, 100.0 µg/L, and 1000.0 µg/L polystyrene MPs (PS-MPs) for 14 days to study the potential impact of the microplastics on the Golden Pompano. Fish show slowed growth after 14 days of exposure. Histopathology shows irregular shaped nuclei and nuclear and cytoplasmic vacuolation traits in liver. Oxidative stress-related enzyme activity and gene expression data show that oxidative damage occurs in the high-concentrations (100.0 µg/L and 1000.0 µg/L) of PS-MPs exposures. Up-regulation of Grp78, Xbp-1, Eif-2α and chop gene expression indicates the occurrence of endoplasmic reticulum stress, and the western blot results also confirmed this. Severe oxidative stress also caused ERS, which ultimately increased BAX/Bcl-2 ratios and induces apoptosis. Furthermore, up-regulated anaerobic respiration, altered lipid metabolism, and immune disturbance were exhibited during PS-MPs stress. Therefore, oxidative stress appeared to be the main toxicity issue caused by MPs, while ERS-mediated apoptosis, metabolic alterations, and immune responses were induced by this stress. Notably, endoplasmic reticulum stress and apoptosis are a self-protective mechanism, which may be an intermediate link in the toxicity of microplastics. This study highlights the role of endoplasmic reticulum stress in MPs toxicology and assesses the adverse effects of microplastics on Golden Pompano.

The application of polypropylene mesh for testicular prosthesis in surgical castration for patients with prostate cancer.

BACKGROUND: To explore whether a polypropylene mesh is suitable for application as a new material for testicular prostheses. METHODS: The data of 65 patients with advanced prostate cancer who underwent surgical castration in hospital were collected and analyzed. Patients who preferred to undergo traditional orchidectomy (n = 16) were assigned to the control group, and patients who underwent subcapsular orchiectomy plus implantation of a polypropylene mesh testicular prosthesis (n = 49) were assigned to the experimental group. The presence of hematoma, infection, and other complications in patients in these two groups were investigated at 3 and 12 months following the surgery. The patients were also followed up using a self-designed testicular castration satisfaction questionnaire. RESULTS: A higher score indicated greater satisfaction. The mean score was 15.33 ± 2.85 in the experimental group and 4.63 ± 1.45 in the control group at 3 months after the surgery. The mean score was 14.92 ± 1.74 in the experimental group and 4.25 ± 1.61 in the control group at 12 months after the surgery. The difference between the two groups was statistically significant at the two time points (P < 0.01). CONCLUSIONS: Compared with orchidectomy alone, patients were more satisfied with subcapsular orchiectomy plus the implantation of a polypropylene mesh testicular prosthesis for the treatment of advanced prostate cancer. Furthermore, the polypropylene mesh testicular prosthesis maintained its original character over the duration of the study, with a good long-term effect. Thus, implantation of a polypropylene mesh testicular prosthesis is indicated to be safe and effective, and polypropylene mesh is potentially useful as a new material for testicular prostheses.

[Polypropylene mesh for testicular prothesis implantation: A report of 57 cases].

OBJECTIVE: To search for an optimum method for testicular prothesis implantation in the treatment of testis loss. METHODS: We retrospectively analyzed the surgical methods and outcomes of 53 cases of terminal prostate cancer and 4 cases of unilateral testicular torsion treated by implantation of testicular prothesis with the polypropylene mesh. RESULTS: The 57 male patients all received testicular prothesis with the polypropylene mesh. All the patients were satisfied with the appearance and size of the scrotum after surgery. No scrotal hematoma, prosthesis infection, or autoimmune disease occurred postoperatively. CONCLUSION: Testis loss is not a rare condition clinically, for the treatment of which surgical implantation of testicular prothesis with the polypropylene mesh can achieve both a fine tissue compatibility and a desirable scrotal appearance.

Adsorption-desorption behaviors of ciprofloxacin onto aged polystyrene fragments in aquatic environments.

As two emerging pollutants of great concern, microplastics (MPs) and antibiotics inevitably cooccur in various aquatic environments and interact with each other, impacting the fate and ecological risks. Aging obviously complicates their interaction and deserves further study. Therefore, the adsorption-desorption behaviors of ciprofloxacin (CIP) onto polystyrene (PS) fragments with various aging extent were investigated, and the key physiochemical properties influencing the interaction and the interaction mechanisms were clarified by redundancy analysis, FTIR and XPS spectra. The physicochemical properties of PS MPs were significantly changed with aging time, and the morphological and chemical changes seemed to occur asynchronously. The adsorption of CIP onto the pristine PS MPs relied on physisorption, especially the ion-involving electrostatic and cation-π interaction. Due to the hydrogen bonding formed by the C-OH, CO, and O-CO groups of PS and CIP, the adsorption capacities of the aged PS MPs were greatly increased. The desorption efficiency of CIP from MPs in the gastric fluid was closely related to the solution ionic strengths, C-OH and CO groups of MPs, while that in the intestinal fluid was associated with O-CO groups of MPs. The different impact factors could be well described by the differences in the chemical components and pHs of the simulated gastric and intestinal fluids. This study gives a comprehensive understanding of the adsorption-desorption behaviors of antibiotics onto MPs at a molecular level and indicates that MPs could act as Trojan horses to transport antibiotics into aquatic organisms.

Conversion of control and genetically-modified poplar into multi-scale products using integrated pretreatments.

In this work, a green and robust pretreatment which integrated acetic acid-catalyzed hydrothermal and wet mechanical pretreatment, was developed to efficiently produce high yield (up to 40.12%) of xylooligosaccharides and digestible substrates from Caffeoyl Shikimate Esterase down-regulated and control poplar wood. Subsequently, superhigh yield (more than 95%) of glucose and residual lignin were obtained after a moderate enzymatic hydrolysis. The residual lignin fraction exhibited a well-preserved ß-O-4 linkages (42.06/100Ar) and high S/G ratio (6.42). Subsequently, lignin-derived porous carbon was successfully synthesized, and it exhibited a high specific capacitance of 273.8 F g-1 at 1.0 A g-1 and long cycling stability (remained 98.5% after 10,000 cycles at 5.0 A g-1) compared to control poplar wood, demonstrating that special advantage of this genetically-modified poplar in this integrated process. This work developed an energy-saving and eco-friendly pretreatment technology as a waste-free route for converting different lignocellulosic biomass to multiple products.

Clinical Efficiency and Patient Preference of Immediate Digital Impression after Implant Placement for Single Implant-Supported Crown.

OBJECTIVE: To evaluate the time efficiency and patient preference of three impression techniques by comparing immediate digital impression performed directly after implantation with regular digital impression and conventional implant impression performed 3 months after implantation. METHODS: Twenty consecutive patients with a missing single molar or premolar who received implant treatment were recruited into this prospective self-controlled clinical trial. Three different impression techniques were performed after implant surgery on all the participants: An intraoral scanning (IOS) impression performed immediately after implant placement (immediate digital impression) was compared with a regular digital impression and a classic polyether impression (conventional implant impression) performed 3 months after implant surgery. The operating time of each impression technique was recorded. Patients were asked to complete a visual analogue scale (VAS) questionnaire on their perception of the three techniques to describe their satisfaction and preference. Statistical analyses were performed with the Wilcoxon signed rank test. RESULTS: The clinical time of the immediate digital impression (10.97 ± 2.1 min) was significantly shorter than that of the conventional implant impression (14.45 ± 3.0 min) (P < 0.05). The mean time of the immediate digital impression (10.97 ± 2.1 min) was statistically the same as that of the regular digital impression (10.23 ± 2.7 min) (P > 0.05). Participants' subjective evaluation indicated higher satisfaction with the immediate digital impression than with the regular digital impression and the conventional implant impression. CONCLUSION: The immediate digital impression was more efficient than the conventional implant impression and had the same efficiency as the regular digital impression. Among the three impression techniques, the participants showed higher satisfaction with the immediate digital impression.

A New Segmental Hepatectomy Approach Using Ultrasound-Guided Portal Branch Infusion of a Thermosensitive Gel in Pigs.

BACKGROUND: The aim of this study was to evaluate the safety, feasibility, and efficacy of a new segmental hepatectomy (SH) approach using intraoperative ultrasound (IOUS) guided infusion of a reversible thermosensitive gel into the portal vein branch in pigs; MATERIALS AND METHODS: Poloxamer 407 aqueous solution (20%, W/V) was mixed with indocyanine green (P407-ICG) in this study to make it green, and it remained liquid at room temperature and turned into a firm gel upon reaching body temperature. In experiment I, six pigs were used to detect the outcome of infusing the mixture into the biliary tract, liver parenchyma, and hepatic vein for a safety study. In experiment II, another 12 pigs were randomly segmented into two groups [SH group and partial hepatectomy (PH) group] to investigate the feasibility and efficacy of the new approach using IOUS-guided infusion of the mixture into the portal branch; RESULTS: No thermosensitive gel-induced abnormal changes were observed in the safety study. In the SH group, IOUS-guided infusion of the P407-ICG solution was effective in occluding the portal blood temporarily and demarcating the target liver segment to achieve precise SH. The blood loss in the SH group was significantly less than that of the PH group; CONCLUSIONS: SH assisted by IOUS-guided infusion of the reversible thermosensitive gel into the feeding portal vein branches is feasible, safe, simple, and effective.

Efficacy of a novel endotoxin adsorber polyvinylidene fluoride fiber immobilized with (L)-serine ligand on septic pigs.

A novel adsorber, polyvinylidene fluoride matrix immobilized with L-serine ligand (PVDF-Ser), was developed in the present study to evaluate its safety and therapeutic efficacy in septic pigs by extracorporeal hemoperfusion. Endotoxin adsorption efficiency (EAE) of the adsorber was firstly measured in vitro. The biocompatibility and hemodynamic changes during extracorporeal circulation were then evaluated. One half of 16 pigs receiving lipopolysaccharide (Escherichia coli O111:B4, 5 µg/kg) intravenously in 1 h were consecutively treated by hemoperfusion with the new adsorber for 2 h. The changes of circulating endotoxin and certain cytokines and respiratory function were analyzed. The 72 h-survival rate was assessed eventually. EAE reached 46.3% (100 EU/ml in 80 ml calf serum) after 2 h-circulation. No deleterious effect was observed within the process. The plasma endotoxin, interleukin-6 (IL-6), and tumor necrosis factor-α (TNF-α) levels were decreased during the hemoperfusion. Arterial oxygenation was also improved during and after the process. Furthermore, the survival time was significantly extended (>72 h vs. 47.5 h for median survival time). The novel product PVDF-Ser could adsorb endotoxin with high safety and efficacy. Early use of extracorporeal hemoperfusion with the new adsorber could reduce the levels of circulating endotoxin, IL-6, and TNF-α, besides improve respiratory function and consequent 72 h-survival rate of the septic pigs. Endotoxin removal strategy with blood purification using the new adsorber renders a potential promising future in sepsis therapy.

[Report of a case with Joubert syndrome and literature review].

OBJECTIVE: To explore the clinical feature, imaging and their diagnostic value for Joubert syndrome (JS). METHOD: The clinical data, imaging feature, and 31 references from China Biomedical literature database (CBMdise) were reviewed and analyzed. RESULT: The age of onset of 32 patients including male 20 and female 12 ranged from 3 days to 6 years (mean 2.2 years). All the 32 patients with Joubert syndrome showed "slow growth" and "reduced muscle tension", 26 cases (81.3%) showed "gasp for breath", 26 cases (81.3%) showed "unusual motion of eyeball", 2 cases (6.3%) showed additional fingers (toes), 6 cases (18.8%) showed stretching tongue with agape. The typical imaging features of Joubert syndrome included "molar tooth sign", "midline cleavage" between cerebellar hemispheres and "bat-wing" like fourth ventricle, all the 32 patients with Joubert syndrome showed "midline cleavage", "molar tooth sign" was present in 29 cases (90.1%), and "bat-wing" like fourth ventricle in 30 cases (93.8%). CONCLUSION: Joubert syndrome is a rare congenital brain malformation. The typical clinical manifestations included "gasp for breath", "reduced tension of muscle", "slow growth" and "unusual motion of eyeball", and at the same time the patients had the following typical imaging features of brain: "molar tooth sign", "midline cleavage" and "bat-wing" like fourth ventricle.

[The use of CAD/CAM system with zirconia in modern prosthodontics].

Computer assisted design/computer assisted machining (CAD/CAM) technology has received considerable clinical and research interest from modern dental practices as a means of delivering all-ceramic restorations. Up to now the CAD/CAM system with zirconia has the highest fracture strength in all all-ceramic materials, and consistently enabled the most esthetic, lifelike reproduction of natural dentition. They have been widely received by both dentists and patients. The CAD/CAM system with zirconia is indicated for crowns and bridges in natural teeth or implants and telescope dentures, the CAD/CAM with zirconia can be placed anywhere in the mouth, and can replace the porcelain crowns and bridges for single crown and bridges less than 6 units. This paper described the techniques of CAD/CAM system with zirconia in fabrication of crowns, bridges, telescope dentures and implant dentures with colored illustrations.