Color-variable dual-dyed photodynamic antimicrobial polyethylene terephthalate (PET)/cotton blended fabrics.

The urgent demand for scalable, potent, color variable, and comfortable antimicrobial textiles as personal protection equipment (PPE) to help reduce infection transmission in hospitals and healthcare facilities has significantly increased since the start of the COVID-19 pandemic. Here, we explored photodynamic antimicrobial polyethylene terephthalate/cotton (TC) blended fabrics comprised of photosensitizer-conjugated cotton fibers and polyethylene terephthalate (PET) fibers dyed with disperse dyes. A small library of TC blended fabrics was constructed wherein the PET fibers were embedded with traditional disperse dyes dominating the fabric color, thereby enabling variable color expression, while the cotton fibers were covalently coupled with the photosensitizer thionine acetate as the microbicidal agent. Physical (SEM, CLSM, TGA, XPS and mechanical strength) and colorimetric (K/S and CIELab values) characterization methods were employed to investigate the resultant fabrics, and photooxidation studies with DPBF demonstrated the ability of these materials to generate reactive oxygen species (i.e., singlet oxygen) upon visible light illumination. The best results demonstrated a photodynamic inactivation of 99.985% (~ 3.82 log unit reduction, P = 0.0021) against Gram-positive S. aureus, and detection limit inactivation (99.99%, 4 log unit reduction, P ≤ 0.0001) against Gram-negative E. coli upon illumination with visible light (60 min; ~ 300 mW/cm2; λ ≥ 420 nm). Enveloped human coronavirus 229E showed a photodynamic susceptibility of ~ 99.99% inactivation after 60 min illumination (400-700 nm, 65 ± 5 mW/cm2). The presence of the disperse dyes on the fabrics showed no significant effects on the aPDI results, and furthermore, appeared to provide the photosensitizer with some measure of protection from photobleaching, thus improving the photostability of the dual-dyed fabrics. Taken together, these results suggest the feasibility of low cost, scalable and color variable thionine-conjugated TC blended fabrics as potent self-disinfecting textiles.

Influence of polyvinyl chloride microplastic on chromium uptake and toxicity in sweet potato.

The extensive use of plastic products and rapid industrialization have created a universal concern about microplastics (MPs). MPs can pose serious environmental risks when combined with heavy metals. However, current research on the combined effects of MPs and hexavalent chromium [Cr(VI)] on plants is insufficient. Herein, a 14-day hydroponic experiment was conducted to investigate the impact of PVC MPs (100 and 200 mg/L) and Cr(VI) (5, 10, and 20 µM) alone and in combination on sweet potato. Results showed that combined Cr(VI) and PVC MPs affected plant growth parameters significantly, but PVC MPs alone did not. The combined application of PVC MPs and Cr(VI) resulted in a decrease in plant height (24-65%), fresh biomass per plant (36-71%), and chlorophyll content (16-34%). Cr(VI) bioaccumulation increased with the increase in its doses, with the highest concentration of Cr(VI) in the leaves (16.45 mg/kg), stems (13.81 mg/kg), and roots (236.65 mg/kg). Cr(VI) and PVC MPs-induced inhibition varied with Cr(VI) and PVC MPs doses. Osmolytes and antioxidants, lipid peroxidation, and H2O2 contents were significantly increased, while antioxidant enzymes except CAT were decreased with increasing Cr(VI) concentration alone and mixed treatments. The presence of PVC MPs promoted Cr(VI) accumulation in sweet potato plants, which clearly showed severe toxic effects on their physio-biochemical characteristics, as indicated by a negative correlation between Cr(VI) concentration and these parameters. PVC MPs alone did not significantly inhibit these parameters. The findings of this study provide valuable implications for the proper management of PVC MPs and Cr(VI) in sweet potato plants.

Abundance, spatial distribution, and characteristics of microplastics in agricultural soils and their relationship with contributing factors.

Agro-ecosystem contamination with microplastics (MPs) is of great concern. However, limited research has been conducted on the agricultural soil of tropical regions. This paper investigated MPs in the agro-ecosystem of Hainan Island, China, as well as their relationships with plastic mulching, farming practices, and social and environmental factors. The concentration of MPs in the study area ranged from 2800 to 82500 particles/kg with a mean concentration of 15461.52 particles/kg. MPs with sizes between 20 and 200 µm had the highest abundance of 57.57%, fragment (58.16%) was the most predominant shape, while black (77.76%) was the most abundant MP colour. Polyethylene (PE) (71.04%) and polypropylene (PP) (19.83%) were the main types of polymers. The mean abundance of MPs was significantly positively correlated (p < 0.01) with all sizes, temperature, and shapes except fibre, while weakly positively correlated with the population (p = 0.21), GDP (p = 0.33), and annual precipitation (p = 0.66). In conclusion, plastic mulching contributed to significant contamination of soil MPs in the study area, while environmental and social factors promoted soil MPs fragmentation. The current study results indicate serious contamination with MPs, which poses a concern regarding ecological and environmental safety.

TfR-T12 short peptide and pH sensitive cell transmembrane peptide modified nano-composite micelles for glioma treatment via remodeling tumor microenvironment.

Two kinds of amphiphilic block copolymers of TfR-T12-PEG-PLGA and TATH7-PEG-PLGA were synthesized to self-assembly nano-composite micelles for encapsulating paclitaxel and imiquimod synchronously. TfR-T12 peptide modified nano-composite micelles can pass through BBB in a TfR-mediated way to achieve targeted delivery of chemotherapeutic drugs, and pH sensitive TATH7 peptide modified nano-composite micelles enhanced uptake efficiency more significantly under pH 5.5 medium than pH 7.4 medium. The results of pharmacodynamic evaluation in vivo showed that the nano-composite micelles had achieved good anti-tumor effect in subcutaneous and normotopia glioma models, and effectively prolonged the life cycle of tumor-bearing mice. The nano-composite micelles regulated the immunosuppression phenomenon of tumor microenvironment significantly, and promoted the M1 polarization of TAMs, then enhanced the proliferation and activation of CD8+ T cells in tumor microenvironment. It comes to conclusion that the nano-composite micelle achieves the purpose of effective treatment of glioma by chemotherapy combined with immunotherapy.

Effect of Er:YAG laser irrigation with different etching modes on the push-out bond strength of fiber posts to the root dentine.

The objective of this study was to evaluate the effect of Er:YAG laser irrigation on the push-out bond strength of fiber posts to the root dentine. Sixty extracted human mandibular first premolars were collected and decoronated. The residual roots received endodontic treatment. The treated roots were randomly divided into three groups according to different irrigation protocols: group LAI (Er:YAG laser-activated irrigation), group PUI (passive ultrasonic irrigation, positive control), and group CSI (conventional syringe irrigation, negative control) (n = 20). Each group was divided into two subgroups, either total-etching modes or self-etching modes (n = 10). After fiber post restoration, all roots were sectioned into seven 1.0-mm-thick slices. The slices received a push-out test by a universal test machine. The resin tag on the segments' bonding interfaces was observed by scanning electron microscope. There were significant differences in the effects of the irrigation method, bonding modes, and root regions on the push-out bond strength among the groups (p < 0.05). The specimens with Er:YAG laser-activated irrigation and self-etching mode showed significantly the highest bonding strength (p < 0.001). The lengths and densities of resin tags in group PUI or group LAI with self-etching modes were longer than those in group CSI with total-etching modes. The laser-activated irrigation with self-etching modes improved the bond strength of fiber post to root dentine compared to the passive ultrasonic irrigation or conventional syringe irrigation with total or self-etching modes.

PRDX6 alleviates lipopolysaccharide-induced inflammation and ferroptosis in periodontitis.

OBJECTIVE: Periodontitis is a progressive and inflammatory oral disease and results in the damage of the supporting tissues of teeth. Peroxiredoxin 6 (PRDX6) is an antioxidant enzyme identified as a regulator in ferroptosis. This study aimed to investigate whether PRDX6 could protect human gingival fibroblasts (HGFs) from lipopolysaccharide (LPS)-induced inflammation and its mechanisms. MATERIAL AND METHODS: Both inflamed and non-inflamed human gingival tissues were collected to assess the expression of PRDX6 and nuclear factor erythropoietin 2-related factor 2 (NRF2) by Immunohistochemistry and Western blotting. Furthermore, the molecular mechanisms of PRDX6 have been clarified in PRDX6 silenced cells. The inflammatory cytokines in HGFs were measured by RT-qPCR and ELISA. The lipid hydroperoxide (LOOH) was detected by C11-BODIPY. RESULTS: The expression of PRDX6 and NRF2 were decreased in gingival tissues of severe periodontitis patients. The increased LPS-induced LOOH and inflammatory cytokines were found in PRDX6 knockdown HGFs. Besides, the inhibition of ferroptosis or PRDX6 phospholipase A2 activity (PLA2) alleviated LPS-induced inflammatory cytokines and LOOH. However, inhibiting NRF2 signalling upregulated those in HGFs. CONCLUSIONS: Therefore, this study provided a new mechanistic insight that PRDX6, regulated by the NRF2 signalling, alleviates LPS-induced inflammation and ferroptosis in human gingival fibroblasts.

Facile Synthesis of Antibody-Coupled Polydopamine-Coated Magnetic Graphene Oxide Composites for Efficient Immunopurification and Metabolomics Analysis of Mitochondria.

As a vital hub, a mitochondrion houses metabolic pathways that play important roles in cellular physiology. Aberrant metabolites occurring in mitochondria are closely associated with the emergence and progression of various mitochondria-related diseases. Therefore, a simple and versatile approach to efficiently purify intact mitochondria is urgently needed to precisely and comprehensively characterize the composition and abundance of the mitochondrial metabolome in different physiological and pathological states. In this work, novel immunoaffinitive magnetic composites MagG@PD@Avidin@TOM20 were prepared to achieve highly selective isolation of intact mitochondria from three different hepatocytes (LO2, HepG2, and Huh7). The prepared composites inherit combined merits, including strong magnetic responsiveness, excellent stability, and specific and high affinity between antibody TOM20 and mitochondrial outer membrane protein. These mitochondria attached on MagG@PD@Avidin@TOM20 were characterized by the western blot and fluorescence microscopy to confirm their purity and integrity, which are vital for reliable mitochondrial metabolic analysis. Subsequently, ultrahigh-performance liquid chromatography-high-resolution mass spectrometry-based untargeted metabolomics analysis was conducted to characterize the metabolomes in the immunopurified mitochondria and whole cells. Notably, the metabolite profiles of whole cells and mitochondria including itaconic acid, acetylcarnitine, malic acid, etc., were significantly different. These data underscore the importance of determining metabolites at the mitochondrial level, which would supplement us new knowledge at the subcellular level.

Smart Nanosacrificial Layer on the Bone Surface Prevents Osteoporosis through Acid-Base Neutralization Regulated Biocascade Effects.

Osteoporosis is a global chronic disease characterized by severe bone loss and high susceptibility to fragile fracture. It is widely accepted that the origin acidified microenvironment created by excessive osteoclasts causes irreversible bone mineral dissolution and organic degradation during osteoclastic resorption. However, current clinically available approaches are mainly developed from the perspective of osteoclast biology rather than the critical acidified niche. Here, we developed a smart "nanosacrificial layer" consisting of sodium bicarbonate (NaHCO3)-containing and tetracycline-functionalized nanoliposomes (NaHCO3-TNLs) that can target bone surfaces and respond to external secreted acidification from osteoclasts, preventing osteoporosis. In vitro and in vivo results prove that this nanosacrificial layer precisely inhibits the initial acidification of osteoclasts and initiates a chemically regulated biocascade to remodel the bone microenvironment and realize bone protection: extracellular acid-base neutralization first inhibits osteoclast function and also promotes its apoptosis, in which the apoptosis-derived extracellular vesicles containing RANK (receptor activator of nuclear factor-κ B) further consume RANKL (RANK ligand) in serum, achieving comprehensive osteoclast inhibition. Our therapeutic strategy for osteoporosis is based on original and precise acid-base neutralization, aiming to reestablish bone homeostasis by using a smart nanosacrificial layer that is able to induce chemically regulated biocascade effects. This study also provides a novel understanding of osteoporosis therapy in biomedicine and clinical treatments.

Rational Synthesis of Aptamer-Functionalized Polyethylenimine-Modified Magnetic Graphene Oxide Composites for Highly Efficient Enrichment and Comprehensive Metabolomics Analysis of Exosomes.

Exosomes, which are phospholipid bilayer nanovesicles, can transfer their content to recipient cells, playing a crucial role in intercellular communication. Exosomes have emerged as promising cancer biomarkers. However, a convenient, efficient, and economical approach for their isolation and comprehensive analysis is still technically challenging. In this study, aptamer-based immunoaffinitive magnetic composites, MagG@PEI@DSP@aptamer, were prepared to achieve the convenient capture, efficient enrichment, and mild release of exosomes. The constructed composites contain three segments: a PEI-modified magnetic graphene scaffold, an aptamer CD63 sequence, and a cleavable cross-linker in between. Notably, the binding capacity of MagG@PEI@DSP for an aptamer is 93 nmol/mg, and per milligram MagG@PEI@DSP@aptamer could capture 450 µg exosomes. Moreover, the released exosomes from MagG@PEI@DSP@aptamer composites were intact and well-dispersed. The prepared composites were then applied to profile the metabolite composition of exosomes secreted by breast cancer cells MCF-7, and the number of detected features was obviously increased when compared to that obtained by the traditional ultracentrifugation method (4528 vs 3710 and 3967 vs 3785 in the positive and negative ionization modes). Besides, the exosomes secreted by MCF-7 and normal breast cells MCF-10A were isolated from cell culture medium with MagG@PEI@DSP@aptamer, and their metabolic profiles were then comprehensively analyzed; in total, 119 metabolites in MCF-7 and MCF-10A were identified. Compared with exosomes from MCF-10A, 43 and 42 metabolites were upregulated and downregulated, respectively, in those from MCF-7. These data showed that the prepared MagG@PEI@DSP@aptamer composites can be used to effectively capture exosomes and further for metabolomics analysis.

Protoporphyrin-IX conjugated cellulose nanofibers that exhibit high antibacterial photodynamic inactivation efficacy.

Towards the development of anti-infective nanoscale materials employing a photodynamic mechanism of action, we report the synthesis, physical properties (SEM, mechanical strength, water contact angle), spectroscopic characterization (infrared, Raman, DRUV), and evaluation of antibacterial efficacy of porphyrin-conjugated regenerated cellulose nanofibers, termed RC-TETA-PPIX-Zn. Cellulose acetate was electrospun to produce nanofibers, thermally treated to enhance mechanical strength, and finally hydrolyzed to produce regenerated cellulose (RC) nanofibers that possessed a high surface area and nanofibrous structure. Covalent grafting of a protoporphyrin IX (PPIX) photosensitizer using epichlorohydrin/triethylenetetramine (TETA), followed by zinc chelation, afforded RC-TETA-PPIX-Zn. The high surface area afforded by the nanofibers and efficient photosensitizer conjugation led to a very high loading of 412 nmol PPIX/mg material, corresponding to a degree of substitution of 0.1. Antibacterial efficacy was evaluated against Staphylococcus aureus (ATCC-6538) and Escherichia coli (ATCC-8099), with our best results achieving detection limit inactivation (99.999+%) of both bacteria after only 20 min illumination (Xe lamp, λ ≥ 420 nm). No statistically significant loss in antibacterial activity was observed when using nanofibers that had been 'photo-aged' with 5 h of pre-illumination to simulate the effects of photobleaching. Post aPDI, scanning electron microscopy revealed that the bacteria had undergone cell membrane leakage, consistent with oxidative damage caused by photo-generated reactive oxygen species. Taken together, the conjugation strategy employed here provides a scalable, facile and efficient route to creating nanofibrous materials from natural polymers with a high photosensitizer loading, enabling the use of commercially-available neutral porphyrin photosensitizers, such as PPIX, in the design and synthesis of potent anti-infective nanomaterials.

Preparation of Pd/Bacterial Cellulose Hybrid Nanofibers for Dopamine Detection.

Palladium nanoparticle-bacterial cellulose (PdBC) hybrid nanofibers were synthesized by in-situ chemical reduction method. The obtained PdBC nanofibers were characterized by a series of analytical techniques. The results revealed that Pd nanoparticles were evenly dispersed on the surfaces of BC nanofibers. Then, the as-prepared PdBC nanofibers were mixed with laccase (Lac) and Nafion to obtain mixture suspension, which was further modified on electrode surface to construct novel biosensing platform. Finally, the prepared electrochemical biosensor was employed to detect dopamine. The analysis result was satisfactory, the sensor showed excellent electrocatalysis towards dopamine with high sensitivity (38.4 µA·mM(-1)), low detection limit (1.26 µM), and wide linear range (5-167 µM). Moreover, the biosensor also showed good repeatability, reproducibility, selectivity and stability and was successfully used in the detection of dopamine in human urine, thus providing a promising method for dopamine analysis in clinical application.

Reversible protection of Cys-93(ß) by PEG alters the structural and functional properties of the PEGylated hemoglobin.

As a potential hemoglobin (Hb)-based oxygen carrier (HBOC), the PEGylated Hb has received much attention for its non-nephrotoxicity. However, PEGylation can adversely alter the structural and functional properties of Hb. The site of PEGylation is an important factor to determine the structure and function of the PEGylated Hb. Thus, protection of some sensitive residues of Hb from PEGylation is of great significance to develop the PEGylated Hb as HBOC. Here, Cys-93(ß) of Hb was conjugated with 20 kDa polyethylene glycol (PEG20K) through hydrazone and disulfide bonds. Then, the conjugate was modified with PEG5K succinimidyl carbonate (PEG5K-SC) using acylation chemistry, followed by removal of PEG20K Hb with hydrazone hydrolysis and disulfide reduction. Reversible conjugation of PEG20K at Cys-93(ß) can protect Lys-95(ß), Val-1(α) and Lys-16(α) of Hb from PEGylation with PEG5K-SC. The autoxidation rate, oxygen affinity, structural perturbation and tetramer instability of the PEGylated Hb were significantly decreased upon protection with PEG20K. The present study is expected to improve the efficacy of the PEGylated Hb as an oxygen therapeutic.

Self-Assembled Cubic Liquid Crystalline Nanoparticles for Transdermal Delivery of Paeonol.

BACKGROUND: The aim of this study was to optimize the preparation method for self-assembled glyceryl monoolein-based cubosomes containing paeonol and to characterize the properties of this transdermal delivery system to improve the drug penetration ability in the skin. MATERIAL AND METHODS: In this study, the cubic liquid crystalline nanoparticles loaded with paeonol were prepared by fragmentation of glyceryl monoolein (GMO)/poloxamer 407 bulk cubic gel by high-pressure homogenization. We evaluated the Zeta potential of these promising skin-targeting drug-delivery systems using the Malvern Zeta sizer examination, and various microscopies and differential scanning calorimetry were also used for property investigation. Stimulating studies were evaluated based on the skin irritation reaction score standard and the skin stimulus intensity evaluation standard for paeonol cubosomes when compared with commercial paeonol ointment. In vitro tests were performed on excised rat skins in an improved Franz diffusion apparatus. The amount of paeonol over time in the in vitro penetration and retention experiments both was determined quantitatively by HPLC. RESULTS: Stimulating studies were compared with the commercial ointment which indicated that the paeonol cubic liquid crystalline nanoparticles could reduce the irritation in the skin stimulating test. Thus, based on the attractive characteristics of the cubic crystal system of paeonol, we will further exploit the cosmetic features in the future studies. CONCLUSIONS: The transdermal delivery system of paeonol with low-irritation based on the self-assembled cubic liquid crystalline nanoparticles prepared in this study might be a promising system of good tropical preparation for skin application.

Laccase immobilized on a PAN/adsorbents composite nanofibrous membrane for catechol treatment by a biocatalysis/adsorption process.

The treatment of catechol via biocatalysis and adsorption with a commercial laccase immobilized on polyacrylonitrile/montmorillonite/graphene oxide (PAN/MMT/GO) composite nanofibers was evaluated with a homemade nanofibrous membrane reactor. The properties in this process of the immobilized laccase on PAN, PAN/MMT as well as PAN/MMT/GO with different weight ratios of MMT and GO were investigated. These membranes were successfully applied for removal of catechol from an aqueous solution. Scanning electron microscope images revealed different morphologies of the enzyme aggregates on different supports. After incorporation of MMT or MMT/GO, the optimum pH showed an alkaline shift to 4, compared to 3.5 for laccase immobilized on pure PAN nanofibers. The optimum temperature was at 55 °C for all the immobilized enzymes. Besides, the addition of GO improved the operational stability and storage stability. A 39% ± 2.23% chemical oxygen demand (COD) removal from the catechol aqueous solution was achieved. Experimental results suggested that laccase, PAN, adsorbent nanoparticles (MMT/GO) can be combined together for catechol treatment in industrial applications.

Synergistic effect of stereo-complexation and interfacial compatibility in ammonium polyphosphate grafted polylactic acid fibers for simultaneously improved toughness and flame retardancy.

Flammability and poor toughness of unmodified PLA limit its applications in various fields. Though ammonium polyphosphate (APP) is a green and effective flame retardant, it has poor compatibility with the matrix, leading to a decrease in mechanical properties. Stereo-complexation greatly improves the strength and heat resistance of traditional PLA. However, the effect of flame retardants on the formation of stereo-complexed crystals and the impact of stereo-complexation on flame retardancy have not been studied previously. In this research, PDLA chains were first in-situ reacted with APP particles for improved interfacial compatibility. By utilizing the characteristic of PLA enantiomers that can form stereo-complexed crystals, near-complete stereo-complexed PLA fibers with flame retardancy were produced via clean and continuous melt spinning. The compatibility between PDLA-g-APP and PLLA matrix was studied by SEM, rheological analyses and DSC. Strength and flexibility of the fibers were simultaneously enhanced compared to traditional PLA due to the synergistic effect of interfacial compatibility and stereo-complexation. Compared to traditional PLA, the peak heat release rate and total heat release in microcalorimetry test were reduced by 33 % and 22 %, respectively. The flame-retardant fibers achieved a V-0 rating in the UL-94 test, and an increase in LOI value from 19.4 % to 28.2 %.

Highly Stretchable and Fluorescent Visualizable Thermoplastic Polyurethane/Tetraphenylethylene Plied Yarn Strain Sensor with Heterogeneous and Cracked Structure for Human Health Monitoring.

Smart wearable technology has been more and more widely used in monitoring and prewarning of human health and safety, while flexible yarn-based strain sensors have attracted extensive research interest due to their ability to withstand greater external strain and their significant application potential in real-time monitoring of human motion and health signals. Although several strain sensors based on yarn structures have been reported, it remains challenging to strike a balance between high sensitivity and wide strain ranges. At the same time, visual signal sensing is expected to be used in strain sensors thanks to its intuitiveness. In this work, thermoplastic polyurethane (TPU) and tetraphenylethylene (TPE) were wet-spun to fabricate flexible fluorescent fibers used as the substrate of the sensor, followed by the drop addition of polydimethylsiloxane (PDMS) beads and curing to produce a heterogeneous structure, which were further twisted into a plied yarn. Finally, a visualizable flexible yarn strain sensor based on solidified liquid beads and crack structure was obtained by loading polydopamine (PDA) and polypyrrole (PPy) in situ. The sensor exhibited high sensitivity (the GF value was 58.9 at the strain range of 143-184%), a wide working strain range (0-184%), a low monitoring limit (<0.1%), a fast response (58.82 ms), reliable responses at different frequencies, and excellent cycle durability (over 2000 cycles). At the same time, the yarn strain sensor also had excellent photothermal characteristics and a fluorescence crack visualization effect. These attractive advantages enabled yarn strain sensors to accurately monitor various human activities, showing great application potential in health monitoring, personalized medical diagnosis, and other aspects.

Reactive oxide species and ultrasound dual-responsive bilayer microneedle array for in-situ sequential therapy of acute myocardial infarction.

Acute myocardial infarction (AMI) resulting from coronary artery occlusion stands as the predominant cause of cardiovascular disability and mortality worldwide. An all-encompassing treatment strategy targeting pathological processes of oxidative stress, inflammation, proliferation and fibrotic remodeling post-AMI is anticipated to enhance therapeutic outcomes. Herein, an up-down-structured bilayer microneedle (Ce-CLMs-BMN) with reactive oxygen species (ROS) and ultrasound (US) dual-responsiveness is proposed for AMI in-situ sequential therapy. The upper-layer microneedle is formulated by crosslinking ROS-sensitive linker with polyvinyl alcohol loaded with cerium dioxide nanoparticles (CeNPs) featuring versatile enzyme-mimetic activities. During AMI acute phase, prompted by ischemia-induced microenvironmental redox imbalance, this layer swiftly releases CeNPs, which aid in eliminating excessive ROS and catalyzing oxygen gas (O2) production through multiple enzymatic pathways, thereby alleviating oxidative stress-induced damage and modulating inflammation. In AMI chronic repair phase, micro-nano reactors (CLMs) situated in the lower-layer microneedle undergo cascade reactions with the assistance of US irradiation to generate nitric oxide (NO). As a bioactive molecule with pro-angiogenic and anti-fibrotic effects, NO expedites cardiac repair while attenuating adverse remodeling. Additionally, its antiplatelet-aggregating properties contribute to thromboprophylaxis. In-vitro and in-vivo results substantiate the efficacy of this integrated healing approach in AMI management, showcasing promising prospects for advancing infarcted heart repair.

Dual-Targeted Self-Adjuvant Heterocyclic Lipidoid@Polyester Hybrid Nanovaccines for Boosting Cancer Immunotherapy.

Tumor vaccines have demonstrated a modest response rate, primarily attributed to their inefficient delivery to dendritic cells (DCs), low cross-presentation, DC-intrinsic immunosuppressive signals, and an immunosuppressive tumor microenvironment (TME). Here, draining lymph node (DLN)-targeted and tumor-targeted nanovaccines were proposed to address these limitations, and heterocyclic lipidoid (A18) and polyester (BR647) were synthesized to achieve dual-targeted cancer immunotherapy. Meanwhile, oligo hyaluronic acid (HA) and DMG-PEG2000-Mannose were incorporated to prepare dual-targeted nanovaccines encapsulated with STAT3 siRNA and model antigens. The nanovaccines were designed to target the DLN and the tumor, facilitating the delivery of cargo into the cytoplasm. These dual-targeted nanovaccines improved antigen presentation and DC maturation, activated the stimulator of interferon genes (STING) pathway, enhanced the pro-apoptotic effect, and stimulated antitumor immune responses. Additionally, these dual-targeted nanovaccines overcame immunosuppressive TME, reduced immunosuppressive cells, and promoted the polarization of tumor-associated neutrophils from N2 to N1. Among the four dual-targeted nanovaccines that induced robust antitumor responses, the heterocyclic lipidoid@polyester hybrid nanovaccines (MALO@HBNS) demonstrated the most promising results. Furthermore, a combination strategy involving MALO@HBNS and an anti-PD-L1 antibody exhibited an immensely powerful anticancer role. This work introduced a dual-targeted nanovaccine platform for antitumor treatment, suggesting its potential combination with an immune checkpoint blockade as a comprehensive anticancer strategy.

Enhanced localized therapeutic precision: A face-to-face folate-targeted Cu2+-mediated nanotherapy with thermosensitive sustained-release system.

Safe and effective Cu2+ supplementation in local lesion is crucial for minimizing toxicity of DSF-based chemotherapy. Targeted delivery of Cu2+ appears more promising. Intraperitoneal chemotherapy for peritoneal carcinoma (PC) establishes "face-to-face" contact between targeted nanocarriers and tumor tissue. Herein, this study developed a biodegradable, injectable thermosensitive hydrogel that coencapsulating DSF submicroemulsion (DSF-SE) and folate-modified liposome loading glycyrrhizic acid-Cu (FCDL). FCDL acted as 'beneficial horse' to target the tumor-localized folate receptor, thus liberating Cu2+ in tumor nidus. The prepared FCDL and DSF-SE were found with uniform sizes (160.2 nm, 175.4 nm), low surface charge (-25.77 mV, -16.40 mV) and high encapsulation efficiency (97.93 %, 90.08 %). In vitro drug release profile of FCDL, DSF-SE and FCDL＆DSF-SE@G followed a sustained release pattern. And the release behavior of Cu2+ from FCDL was pH-related, i.e., Cu2+ was released faster under acidic condition. When FCDL and DSF-SE were loaded into an PLGA-PEG-PLGA-based hydrogel system, FCDL＆DSF-SE@G was formed to ensure separated delivery of Cu2+ and DSF in space but synchronized release over time. The rheology experiment showed a satisfactory gelling temperature of 32.7 °C. In vitro cytotoxicity study demonstrated that FCDL＆DSF-SE@G significantly lowered the IC50 of free Cu2+/DSF, Cu2+/DSF hydrogel and non-targeted analogue by almost 70 %, 65 % and 32 %, respectively. Accordingly, in tumor-bearing mice, FCDL＆DSF-SE@G augmented the tumor inhibition rates for the same formulations by 352 %, 145 % and 44 %, respectively. The main mechanism was attributed to higher uptake of FCDL and DSF-SE, resulting in increased Cu(DDTC)2 formation, ROS production and cell apoptosis. In conclusion, this targeted nanotherapy approach with dual-nanocarriers loaded hydrogel system, with its focus on face-to-face contact between nanocarriers and tumor tissues in the peritoneal cavity, holds significant promise for intraperitoneal chemotherapy in PC.

Robust integration of light-driven carbon quantum dots with bacterial cellulose enables excellent mechanical and antibacterial biodegradable yarn.

Due to the overuse of antimicrobial drugs, bacterial resistance became an urgent problem to be solved. In this study, carbon quantum dots (CQDs) with high photodynamic antibacterial activity were synthesized by a one-pot hydrothermal method and introduced into bacterial cellulose (BC) dispersion solution. Through a wet-spinning and wet-twisting processing strategy, bionic ordering nanocomposite macrofiber (BC/CQDs-based yarn) based on BC were obtained. The results showed that BC/CQDs-based yarn had excellent tensile strength (226.8 MPa) and elongation (22.2 %). Utilizing the light-driven generation of singlet oxygen (1O2) and hydroxyl radical (·OH), BC/CQDs-based yarn demonstrated remarkable antibacterial efficacy, with 99.9999 % (6 log, P < 0.0001) and 96.54 % (1.46 log, P < 0.0004) effectiveness against E. coli and S. aureus, respectively. At the same time, BC/CQDs-based yarn also displayed the characteristics of photothermal, fluorescent, and biodegradability. In summary, the application potential of BC/CQDs-based yarn is significant, opening up a new strategy for the development of sustainable green weaving and bio-based multi-function yarn.