An electrochemical biosensor for rapid detection of E. coli O157:H7 with highly efficient bi-functional glucose oxidase-polydopamine nanocomposites and Prussian blue modified screen-printed interdigitated electrodes.

The presence of pathogenic bacteria in foods has always been a great threat to the wellbeing of people and the revenue of food manufacturers. Therefore, the demand for advanced detection methods that can sensitively and rapidly detect these pathogens has been of great importance. This study reports an electrochemical biosensor for rapid detection of E. coli O157:H7 with the integration of bifunctional glucose oxidase (GOx)-polydopamine (PDA) based polymeric nanocomposites (PMNCs) and Prussian blue (PB) modified screen-printed interdigitated microelectrodes (SP-IDMEs). The core-shell magnetic beads (MBs)-GOx@PDA PMNCs were first synthesized by the self-polymerization of dopamine (DA). Gold nanoparticles (AuNPs) were dispersed on the surface of PMNCs through biochemical synthesis to achieve further highly efficient adsorption of antibodies (ABs) and GOx. The final product ABs/GOxext/AuNPs/MBs-GOx@PDA PMNCs served as the carrier to separate target bacteria from food matrices as well as the amplifier for electrochemical measurement. The unbound PMNCs were separated by a filtration step and transferred into glucose solution to allow the enzymatic reaction to occur. The change of the current response was measured with an electrochemical detector using PB-modified SP-IDMEs. The constructed biosensor has been proven to be able to detect E. coli O157:H7 with the detection limit of 10(2) cfu ml(-1). The bifunctional PMNCs contain a high load of enzyme and can optimally utilize the binding sites on bacterial cells, which efficiently amplify the signals for measurement. The biosensor in this study exhibited good specificity, reproducibility, and stability and is expected to have a great impact on applications in the detection of foodborne pathogens.

Zipper-like magnetic molecularly imprinted microspheres for on/off-switchable recognition and extraction of 17ß-estradiol from food samples.

Zipper-like on/off-switchable and magnetic molecularly imprinted microspheres (SM-MIMs) were constructed using acrylamide (AAm) and 2-acrylamide-2-methyl propanesulfonic acid (AMPS) as functional monomers for 17ß-estradiol (17ß-E2) recognition and extraction. The imprinted polymer interactions between poly(AAm) (PAAm) and poly(AMPS) (PAMPS) with on/off-switchable property to temperature, exhibited dissociation at relatively higher temperatures (such as 30 °C) and helped 17ß-E2 enter into imprinted sites, leading to higher binding capability. Conversely, the interpolymer complexes between PAAm and PAMPS formed and blocked 17ß-E2 access to imprinted sites at lower temperature (such as 20 °C). SM-MIMs were used as dispersive solid phase extraction (SPE) adsorbent with HPLC for 17ß-E2 pretreatment and detection in food samples, and low limit detection (2.52 µg L-1) and quantification (10.76 µg L-1) with higher recovery were obtained. Therefore, SM-MIMs may be a promising adsorbent for 17ß-E2 pretreatment in food samples owing to its advantages of on/off-switchable recognition, eco-friendly elution, and efficient separation.

Aptasensors for Detection of Avian Influenza Virus H5N1.

Aptamers are single-stranded RNA or DNA oligonucleotides which have specific three-dimensional (3D) structures for high affinity and specific recognition to their target. In diagnostic and detection assays, aptamers represent an alternative to antibodies as recognition agents and offer advantages, such as reduced cost, rapid and reproducible synthesis, controllable modification, and improved stability. Aptamers are favorably used in biosensors as sensitive and selective bio-receptors coupled with a variety of transducers such as optical, mass-sensitive, and electrochemical sensors, the so-called aptasensors. We report the development of several types of aptasensors for rapid and specific detection of avian influenza virus (AIV) H5N1. DNA aptamers with high affinity and specificity against AIV H5N1 were immobilized on the electrode surface and then incorporated into different transducers such as surface plasmon resonance (SPR), quartz crystal microbalance (QCM) and electrochemical transducer. The target viruses were captured by the immobilized aptamers resulting in a detectable signal. The fabrication of aptasensors, detection principles, and their applications for AIV H5N1 detection are addressed.

A smart, phase transitional and injectable DOX/PLGA-Fe implant for magnetic-hyperthermia-induced synergistic tumor eradication.

Magnetic hyperthermia ablation is a new and minimally invasive modality for localized tumor removal. However, an inadequate ablation dosage can leave a residual tumor or cause a variety of complications. In addition, commonly used magnetic nanoparticles can easily escape from the tumor tissue, which present potential safety problems. In this study, a smart phase transitional and injectable implant based on biocompatible poly lactic-co-glycolic acid (PLGA) implant incorporating magnetic material (Fe powder) and anti-cancer drug (doxorubicin (DOX)) was developed. The magnetic-induced hyperthermia and release efficiency of DOX were evaluated in vitro. Drug release can be controlled under external alternating current magnetic field (AMF). The results of the in vivo tumor therapeutic efficacy showed that when exposed to external AMF, this smart injectable DOX/PLGA-Fe implant could converse magnetic energy into heat and accelerate the release of DOX, which leads to increasing the temperature to achieve tumor coagulative necrosis and accelerating the release of DOX to enhance residual tumor apoptosis. Furthermore, there was no leakage of magnetic material, as demonstrated using real-time ultrasound (US) and computerized tomography (CT) imaging, realizing the guidance and monitoring of tumor therapy. In conclusion, this smart phase transitional and injectable implant DOX/PLGA-Fe has the ability to improve the efficiency of this newly developed minimally invasive magnetic ablation of tumor treatment technique, and will provide a new avenue of developing minimally invasive synergistic tumor therapy.

Phase-Shifted PFH@PLGA/Fe3O4 Nanocapsules for MRI/US Imaging and Photothermal Therapy with near-Infrared Irradiation.

Photothermal therapy (PTT) utilizes photothermal conversion reagents to generate heat energy from absorbed light to effectively treat various malignant diseases. This approach has attracted broad and increasing interest in cancer treatment. Near-infrared (NIR)-induced PTT is particularly attractive because of its minimal absorbance by normal tissue and relatively deep tissue penetration. To improve the efficacy of PTT, we have developed nanocapsules encapsulating superparamagnetic iron oxide (Fe3O4) as synergistic agents for NIR-induced PTT. In this study, phase-shift and NIR photoabsorbing poly(lactic-co-glycolic acid) (PLGA) nanocapsules (perfluorohexane (PFH)@PLGA/Fe3O4) were fabricated for MRI/US dual-modal imaging-guided PTT. The multifunctional nanocapsules can be used not only to increase the local tumor temperature by absorbing the NIR energy but also as bimodal contrast agents for both MRI and US imaging. Such nanocapsules can be converted into microbubbles under NIR irradiation, which produces excellent contrast for US imaging and enhanced cancer ablation. We refer to the nanocapsule phase transition process induced by the infrared lamp as NIR radiation droplet vaporization (NIRDV).

Liquid-solid phase-inversion PLGA implant for the treatment of residual tumor tissue after HIFU ablation.

BACKGROUND: HIFU has been shown to be a more suitable alternative for the treatment of primary solid tumors and metastatic diseases than other focal heat ablation techniques due to its noninvasive and extracorporeal nature. However, similar to other focal heat ablation techniques, HIFU is still in need of refinements due to tumor recurrence. METHODS: In this work, we investigated the effectiveness of an adjunct treatment regimen using doxorubicin (DOX)-loaded, injectable, in situ-forming, and phase-inverting PLGA as the second line of defense after HIFU ablation to destroy detrimental residual tumors and to prevent tumor recurrence. All of the statistical analyses were performed using the Statistical Package for the Social Sciences 18.0 (SPSS, Inc., Chicago, IL, USA), and p<0.05 was considered statistically significant. All of the results are presented as the means ± STDEV (standard deviation). For multiple comparisons, ANOVA (differences in tumor volumes, growth rates, apoptosis, proliferation indexes, and Bcl-2 and Bax protein levels) was used when the data were normally distributed with homogenous variance, and rank sum tests were used otherwise. Once significant differences were detected, Student-t tests were used for comparisons between two groups. RESULTS: Our results revealed that DOX diffused beyond the ablated tissue regions and entered tumor cells that were not affected by the HIFU ablation. Our results also show that HIFU in concert with DOX-loaded PLGA led to a significantly higher rate of tumor cell apoptosis and a lower rate of tumor cell proliferation in the areas beyond the HIFU-ablated tissues and consequently caused significant tumor volume shrinkage (tumor volumes:0.26±0.1,1.09±0.76, and 1.42±0.9 cm3 for treatment, sham, and no treatment control, respectively). CONCLUSIONS: From these results, we concluded that the intralesional injection of DOX-loaded PLGA after HIFU ablation is significantly more effective than HIFU alone for the treatment of solid tumors.

Immobilisation of DNA probes for the development of SPR-based sensing.

An immobilisation procedure based on the direct coupling of thiol-derivatised oligonucleotide probes to bare gold sensor surfaces has been used for DNA sensing applications. The instrumentation used relies on surface plasmon resonance (SPR) transduction; in particular the commercially available instruments BIACORE X and SPREETA, have been employed in this study. The performances of the SPR-based DNA sensors resulting from direct coupling of thiol-derivatised DNA probes onto gold chips, have been studied in terms of the main analytical parameters, i.e. selectivity, sensitivity, reproducibility, analysis time, etc. A comparison between the thiol-derivatised immobilisation approach and a reference immobilisation method, based on the coupling of biotinylated oligonucleotide probes onto a streptavidin coated dextran sensor surface, using synthetic complementary oligonucleotides has been discussed. Finally, a denaturation method to obtain ssDNA ready for hybridisation analysis has been applied to polymerase chain reaction (PCR) amplified samples, for the detection of genetically modified organisms (GMOs).

Injectable smart phase-transformation implants for highly efficient in vivo magnetic-hyperthermia regression of tumors.

A minimally invasive, highly efficient and versatile strategy is proposed for localized tumor regression by developing a smart injectable liquid-solid phase-transformation organic-inorganic hybrid composite material, i.e., magnetic-Fe-powder-dispersed PLGA (Fe/PLGA) implants for magnetic hyperthermia therapy of cancer.

Hydrogel based QCM aptasensor for detection of avian influenza virus.

The objective of this study was to develop a quartz crystal microbalance (QCM) aptasensor based on ssDNA crosslinked polymeric hydrogel for rapid, sensitive and specific detection of avian influenza virus (AIV) H5N1. A selected aptamer with high affinity and specificity against AIV H5N1 surface protein was used, and hybridization between the aptamer and ssDNA formed the crosslinker in the polymer hydrogel. The aptamer hydrogel was immobilized on the gold surface of QCM sensor using a self-assembled monolayer method. The hydrogel remained in the state of shrink if no H5N1 virus was present in the sample because of the crosslinking between the aptamer and ssDNA in the polymer network. When it exposed to target virus, the binding reaction between the aptamer and H5N1 virus caused the dissolution of the linkage between the aptamer and ssDNA, resulting in the abrupt swelling of the hydrogel. The swollen hydrogel was monitored by the QCM sensor in terms of decreased frequency. Three polymeric hydrogels with different ratio (100:1 hydrogel I, 10:1 hydrogel II, 1:1 hydrogel III) of acrylamide and the aptamer monomer were synthesized, respectively, and then were used as the QCM sensor coating material. The results showed that the developed hydrogel QCM aptasensor was capable of detecting target H5N1 virus, and among the three developed aptamer hydrogels, hydrogel III coated QCM aptasensor achieved the highest sensitivity with the detection limit of 0.0128 HAU (HA unit). The total detection time from sampling to detection was only 30 min. In comparison with the anti-H5 antibody coated QCM immunosensor, the hydrogel QCM aptasensor lowered the detection limit and reduced the detection time.