Using nanocellulose to improve heat-induced cull cow meat myofibrillar protein gels: effects of particle morphology and content.

BACKGROUND: Enhancing protein gel properties is essential to improve the texture of meat products. In this study, the improvement effects of three types of nanocellulose, i.e. rod-like cellulose nanocrystals (CNC), long-chain cellulose nanofibers (CNF) and spherical cellulose nanospheres (CNS) with different concentrations (1, 3, 5, 10, 15 and 20 g kg-1 ), on cull cow meat myofibrillar protein (MP) gel were investigated. RESULTS: Compared with needle-shaped CNC and spherical CNS, the addition of 10 and 20 g kg-1 long-chain CNF had the most significant improvement effect on gel hardness and water-holding capacity, respectively (P < 0.05), increasing to 160.1 g and 97.8%, respectively. In addition, the incorporation of long-chain CNF shortened the T2 relaxation time and induced the formation of the densest network structure and promoted the phase transition of the gel. However, excessive filling of nanocellulose would destroy the structure of the gel, which was not conducive to the improvement of gel properties. Fourier transform infrared results showed that there was no chemical reaction between the three nanocellulose types and MP, but the addition of nanocellulose was conducive to gel formation. CONCLUSION: The improvement of MP gel properties by adding nanocellulose mainly depends on its morphology and concentration. Nanocellulose with higher aspect ratio is more beneficial to the improvement of gel properties. For each nanocellulose type, there is an optimal addition amount for MP gel improvement. © 2023 Society of Chemical Industry.

Fabrication and physicochemical and antibacterial properties of ethyl cellulose-structured cinnamon oil oleogel: relation between ethyl cellulose viscosity and oleogel performance.

BACKGROUND: Edible packaging and coating with natural antimicrobials such as essential oils is an emerging technology for the control of pathogen growth in meat products. This study aimed to explore ethyl cellulose (EC) of three viscosities for the structuring of cinnamon essential oil (CEO), and investigated the physicochemical properties of the resulting oleogel and its emulsion, as well as the corresponding antibacterial activity in model and actual environments (as in sausages). RESULTS: The network structure of CEO-EC oleogel was more compact with increased EC viscosity, thereby improving the binding capacity and stability of the oil. A positive correlation was found between EC viscosity and particle size of the CEO-EC emulsion. The 45 cP CEO-EC emulsion exhibited greatest antimicrobial activitiy in models with Escherichia coli (E. coli) O157:H7 (ATCC 700927) and Staphylococcus aureus (S. aureus) (ATCC 29213), as well as in sausage, with respect to total counts of mesophilic bacteria, psychrotrophs, lactobacilli, and pseudomonads. CONCLUSION: The CEO-EC oleogel has antibacterial activity, determined by the EC viscosity, that provide potential antibacterial protection for meat products and might be especially suitable for some traditional Chinese ready-to-eat sausages without strictly sealed packaging. © 2019 Society of Chemical Industry.

Using carboxylated cellulose nanofibers to enhance mechanical and barrier properties of collagen fiber film by electrostatic interaction.

BACKGROUND: Collagen-based films including casings with a promising application in meat industry are still needed to improve its inferior performance. In the present study, the reinforcement of carboxylated cellulose nanofibers (CNF) for collagen film, based on inter-/intra- molecular electrostatic interaction between cationic acid-swollen collagen fiber and anionic carboxylated CNF, was investigated. RESULTS: Adding CNF decreased the zeta-potential but increased particle size of collagen fiber suspension, with little effect on pH. Furthermore, CNF addition led to a higher tensile strength but a lower elongation, and the water vapor and oxygen barrier properties were improved remarkably. Because the CNF content was 50 g kg-1 or lower, the films had a homogeneous interwoven network, and CNF homogeneously embedded into collagen fiber matrix according to the scanning electron microscopy and atomic force microscopy analysis. Additionally, CNF addition increased film thickness and opacity, as well as swelling rate. CONCLUSION: The incorporation of CNF endows collagen fiber films good mechanical and barrier properties over a proper concentration range (≤ 50 g kg-1 collagen fiber), which is closely associated with electrostatic reaction of collagen fiber and CNF and, subsequently, the form of the homogenous, compatible spatial network, indicating a potential applications of CNF in collagenous protein films, such as edible casings. © 2017 Society of Chemical Industry.

Using celluloses to reinforce the optimized alginate film in wet state: Effect of cellulose types and cooking treatment.

Alginate (Alg) as co-extruded casing is of interest to the meat industry as replacers for natural sausage casing. However, these studies on the mechanical reinforcement of Alg-based film are still limited in the wet state (e.g. co-extrusion process). In this work, Alg-D with the highest viscosity-average molecular weight (1.12 × 105) was selected from four types of alginates based on the results of the viscosity of Alg solutions and film strength. Next, three celluloses (cellulose nanocrystals (CNC), cellulose nanofibers (CNF) and microfibrillated fiber (MFC)) were added to the Alg-D matrix at different concentrations. SEM showed that the cross section of the Alg-based films became more compact and uniform when the size of celluloses decreased. The tensile test revealed that the strength (TS) of Alg-based films exhibited an initial increase followed by a subsequent drop as the cellulose content rose. The best mechanical strengthening effect was the Alg-CNC film (1.16 MPa), which increased by 93.33 % compared with that of pure Alg. Cooking treatment could further enhance this trend. The opacity increased gradually with the increase of cellulose content, while these films were still transparent enough for food packaging. These findings would have potential applications in food packaging, especially co-extruded sausage casings.

Influence of surface properties on the adhesion of bacteria onto different casings.

Bacteria adhere to the surfaces of sausage casing and form biofilms, which causes food spoilage and quality deterioration. However, bacterial adhesion to the casing surfaces has not received enough attention and has not been extensively studied. In this study, the effect of the physicochemical properties of casing surfaces on bacterial initial adhesion were investigated with Leuconostoc mesenteroides as model bacteria. The adhesion of Leuconostoc mesenteroides onto 5 types of casings were systematically investigated, including animal casings, collagen casings, cellulose casings, fiber casings, and nylon casings, which are the most frequently encountered casings in sausage processing. It was found that the number of viable cells on the casings following the trend as: animal casings > collagen casings > fiber casings > cellulose casings > nylon casings after 4 h of incubation time. This phenomenon might be due to the different physicochemical properties of the different casings. Therefore, physicochemical factors, including zeta potential, hydrophobicity and roughness of casings, zeta potential and hydrophobicity of Leuconostoc mesenteroides, were further characterized. In terms of hydrophobic interactions, the results showed that the number of bacteria attached to the casings did not conform to the trend of hydrophobic interaction. In terms of electrostatic interactions, the results showed that the number of bacteria attached to the casings did not conform to the trend of hydrophobic interaction. The casings with different surface roughnesses in a range of 1.67-20.83 µm, the variation of bacterial adhesion quantity was in good agreement with the variation trend of casing roughness, the result showed that the surface roughness was the key factor dominating the bacterial adhesion rate compared with the surface hydrophobicity and zeta potential. The results give new insights to explore the mechanism of bacterial adhesion on casings and prevent sausage spoilage.

Inhibition of α-amylase and amyloglucosidase by cellulose nanofibrils with different surface charge and spectroscopic analysis of their interaction mechanism.

We investigated the inhibition effect of carboxymethylated cellulose nanofibrils with four different surface chargeon α-amylase and amyloglucosidase via enzyme activity inhibition assay, fluorescence spectra and secondary structure change analysis. These results revealed that cellulose nanofibril with lowest surface charge displayed the greatest inhibition effects against α-amylase (9.81 mg/mL) and amyloglucosidase (13.16 mg/mL). All cellulose nanofibrils in starch model significantly (p < 0.05) inhibited the starch digestion, where the inhibition effect was negatively correlated with the magnitude of particle surface charge. Cellulose nanofibrils could bind α-amylase or amyloglucosidase to form new complex in the manner of static quenching. The thermodynamic parameters demonstrated that the cellulose nanofibrils-starch hydrolase (α-amylase or amyloglucosidase) complexes were formed spontaneously via hydrophobic effects. Additionally, Fourier transform Infrared spectra exhibited the changes in the fraction of secondary structures of starch hydrolase after the interactions with carboxymethylated cellulose nanofibrils. These data provide a convenient and simple method tailor gastrointestinal digestion of starch by changing cellulose surface charge, to control postprandial serum glucose upsurge.

Using celluloses in different geometries to reinforce collagen-based composites: Effect of cellulose concentration.

Cellulose is frequently used to strengthen biocomposite films, but few literature systematically deliberates the effects of concentration of celluloses in different geometries on the reinforcement of these composites. Here we prepared three types of celluloses, including rod-like cellulose nanocrystalline (CNC), long-chain cellulose nanofiber (CNF) and microscopic cellulosic fines (CF). The effect of concentration of the three celluloses was examined on the barrier properties to water and light, thermostability, microstructure, and mechanical properties of collagen (COL) films. The addition of celluloses increased the watertightness and thermostability of composite films. Besides, FTIR showed a increased hydrogen bonding for COL/CNF and COL/CNC composite films, but decrease for COL/CF composites. As the concentration of CF and CNF increased, the strength of composites improved. The TS for COL/CNF (124 MPa) and COL/CF composites (113 MPa) were largely increased, compared with that of collagen ones (90 MPa). Considering the factors of crystallinity, hydrogen bonding, and interfacial tortuosity, COL/CNF composites possessed better mechanical behaviors than that of COL/CF and COL/CNC composites. Furthermore, Halpin-Kardos and Ouali models well predicted the modulus of COL/CNF composites when CNF was below and above percolation threshold (2.7 wt%), respectively.

Tunable mechanical behavior of collagen-based films: A comparison of celluloses in different geometries.

Collagen (Col) films were reinforced by celluloses in different geometries: microcrystalline cellulose (MCC), cellulosic fines (CF), cellulose nanofiber (CNF) and cellulose nanocrystals (CNC). The reinforcement mechanisms were investigated by the elastoplasticity and fracture appearance. Compared with the fracture stress of collagen film (67.5 MPa), the Col-CNF films effectively borne the stress (95.8 MPa) by intercrystalline fracture, ascribing the abundant hydrogen bonding and mechanical locking between cellulose and collagen. The toughness of Col-CF films was increased by the interfibrillar slippage of CF and pull-off of CF within the matrix, improving the strain-to-break from 8.37% to 12.13%. The films added with MCC and CNC weaken the mechanical behavior, due to the defects and lack of mechanical locking. Besides, the effects of celluloses' geometries on the thickness, density, water-tightness, thermal stability, crystallinity and FTIR of films were also investigated. These provide the evidence that the geometries of fillers diversely improve the behaviors of collagen film offering strategies for the film with adjustable mechanical properties.

A top-down approach to improve collagen film's performance: The comparisons of macro, micro and nano sized fibers.

The severe reduction of mechanical strength of collagen once it is extracted or dissociated from animal tissues and no additional crosslinking approaches are conducted, impede its application in biodegradable and edible food packaging. Here, for the first time, high pressure homogenization (HPH) was used to prepare diverse sized fibers and the related fibers-composed films' performance were investigated. These fibers have a diversity of effects on film performance. The films prepared with smaller sized fibers had a more uniform and denser structure. The mechanical and the water barrier properties of the films improved significantly as the fiber size decreased. No obvious change in FTIR and thermal properties suggests that the improved film performance is mainly attributed to the physical entanglement and non-covalent bonds. Given the forementioned benefits of the films, control of fiber size can be a potential industrial approach for producing collagenous materials in edible food packaging.

Metal ions increase mechanical strength and barrier properties of collagen-sodium polyacrylate composite films.

From the previous experiment, it was confirmed that the incorporation of 0.3 wt% sodium polyacrylate (PAAS) into collagen (Co) fibers can improve the mechanical properties and thermal stability of the composite films. In this study, Ca2+, Fe3+ and Ag+ ranging 0.001-0.004 mol/g were used to improve the properties of Co-PAAS blend films based on the rationale of their potential electrostatic interaction with these biopolymers. As expected, Zeta-potential film-forming solutions was decreased to some extent with the addition of metal ions. SEM images presented that the surface of the composites became coarser and internal structure became more stratified as metal ion contents increased. Tensile strength was increased by the addition of these ions with a varied optimal concentration: Ca2+ (0.003 mol/g), Fe3+ (0.002 mol/g) and Ag+ (0.001 mol/g). Water vapor permeability (WVP), solubility and light transmission value of films while causing film thickness no obvious change. In addition, the differential scanning calorimetry (DSC) and thermo-gravimetric analysis (TGA) results indicated that the metal ions improved the thermal stability of the composite film. Therefore, Ca2+, Fe3+ and Ag+ with an appropriate addition amount can be used as a potential alternative to reinforce collagenous composite materials.

Using Cellulose Nanofibers and Its Palm Oil Pickering Emulsion as Fat Substitutes in Emulsified Sausage.

Nano cellulose is attracting great interest in food and nutraceutical fields and also provides a potential additive to develop functional meat products such as low fat sausage. Here, we compared 1 wt% aqueous dispersion of cellulose nanofiber (CNF) and its palm oil Pickering emulsion (CPOE) at the ratio of 1:1 (water: oil, v:v) for being fat alternatives replacing 30% and 50% of the original fat of the emulsified sausage. Replacing fat by CPOE and CNF resulted in lower fat content, lower cooking loss and higher moisture content and higher lightness values (P ≤ 0.05) at both fat levels. Textural analysis indicated that the products formulated with CPOE showed higher hardness, springiness, chewiness and the texture was enhanced by the addition of CNF, especially when 30% fat was substituted. Compared with the full-fat control, the sausages formulated with CPOE became more elastic and compact, especially by the incorporation of CNF according to the rheology and scanning electron microscope results. The reformulated products with CPOE and CNF at the 30% level showed higher sensory scores (P ≤ 0.05) while at the 50% level produced comparable quality to the control, but no significant differences were found in the overall acceptability. In summary, CNF and its Pickering emulsion provide the potential as potential fat alternatives for developing low fat meat products. PRACTICAL APPLICATIONS: Cellulose nanofibers present a variety of distinguishing properties, such as large surface area, great stability and high strength. The ability to stabilize emulsions and good biocompatibility enlarge its application in food. In this study, we attempted to use cellulose nanofibers and its palm oil Pickering emulsion as fat substitutes to partly replace the original fat of pork emulsified sausages, hoping to provide some basic information for using cellulose nanofibers and its Pickering emulsion as fat substitute to high fiber, low fat meat products.

Mechanical reinforcement of gelatin hydrogel with nanofiber cellulose as a function of percolation concentration.

Given a variety of distinguished aspect ratio-related characteristics of nanofiber cellulose (NFC), the impact of NFC on gelatin hydrogel performance involving strength, rheology, microstructure was investigated, focusing on concentration percolation mechanism for it. The inner topography displayed a compact three-dimensional network structure in the NFC-added gelatin gel, however, an NFC amount of 7.5gkg-1 caused more inhomogeneous aggregation. Texture profile analysis showed that the addition of NFC increased the hardness but reduced the elasticity of gelatin gel at 10°C, depending on NFC concentration. For static rheology, adding NFC transformed gelatin solution from the Newtonian action into pseudoplastic behavior at 60°C, with a marked increase of viscosity. Furthermore, NFC improved the temperature of sol-gel transition of gelatin, even no obvious transformation as ≥5gkg-1 NFC used. NFC reinforcement provides the potential to use as texture modifier along with gelatin in food field.

Preparation of cellulose nanocrystals from asparagus (Asparagus officinalis L.) and their applications to palm oil/water Pickering emulsion.

Nano cellulosic materials as promising emulsion stabilizers have attracted great interest in food industry. In this paper, five different sized cellulose nanocrystals (CNC) samples were prepared from stem of Asparagus officinalis L. using the same sulfuric acid hydrolysis conditions but different times (1.5, 2, 2.5, 3.0, and 3.5h). The sizes of these CNC ranged from 178.2 to 261.8nm, with their crystallinity of 72.4-77.2%. The CNC aqueous dispersions showed a typical shear thinning behavior. In a palm oil/water (30/70, v/v) model solution, stable Pickering emulsions were formed with the addition of CNC, and their sizes are in the range of 1-10µm based on the optical and confocal laser scanning microscopy (CLSM) observation. The CNC sample prepared at 3h hydrolysis time, showed a relative efficient emulsion capacity for palm oil droplets, among these CNCs. Other parameters including the CNC, salt, and casein concentrations on the emulsion stability were studied.