[Expert consensus on Antiviral Oral Liquid in treatment of influenza in clinical practice].

Antiviral Oral Liquid is modified on the basis of Baihu Decoction in Treatise on Febrility Diseases by ZHANG Zhongjing and Qingwen Baidu Yin in Qing Dynasty, with effects in clearing toxic heat, repelling dampness and cooling blood. It is widely used in clinical treatment of common colds, influenza and upper respiratory tract infection, mumps, viral conjunctivitis and hand-foot-mouth disease, with a good clinical efficacy and safety. Based on a questionnaire survey of clinicians and a systematic review of study literatures on Antiviral Oral Liquid, the international clinical practice guidelines development method was adopted to analyze the optimal available evidences and expert experiences in the "evidence-based, consensus-based and experience-based" principles. The consensus was jointly reached by more than 30 multidisciplinary experts nationwide, including clinical experts of traditional Chinese and Western medicine in the field of respiratory diseases and infectious diseases, and methodological experts. In the study, literatures were retrieved based on clinical problems in the clinical survey as well as PICO clinical problems. The GRADE system was used for the classification and evaluation of evidence, and fully combined with clinical expert experience, so as to reach expert consensus by the nominal grouping method. This expert consensus recommended or suggested indications, usage and dosage, course of treatment, intervention time for treatment, and the safety and precautions of Antiviral Oral Liquid for treatment of influenza, and can provide reference for the rational use of this drug in clinical practice.

[Osteogenesis of human adipose-derived mesenchymal stem cells-biomaterial mixture in vivo after 3D bio-printing].

OBJECTIVE: To construct human adipose-derived mesenchymal stem cells (hASCs)-biomaterial mixture 3D bio-printing body and detect its osteogenesis in vivo, and to establish a guideline of osteogenesis in vivo by use of 3D bio-printing technology preliminarily. METHODS: P4 hASCs were used as seed cells, whose osteogenic potential in vitro was tested by alkaline phosphatase (ALP) staining and alizarin red staining after 14 d of osteogenic induction. The cells were added into 20 g/L sodium alginate and 80 g/L gelatin mixture (cell density was 1 × 10(6)/mL), and the cell-sodium alginate-gelatin mixture was printed by Bioplotter 3D bio-printer (Envision company, Germany), in which the cells'survival rate was detected by live- dead cell double fluorescence staining. Next, the printing body was osteogenically induced for 1 week to gain the experimental group; and the sodium alginate-gelatin mixture without cells was also printed to gain the control group. Both the experimental group and the control group were implanted into the back of the nude mice. After 6 weeks of implantation, the samples were collected, HE staining, Masson staining, immunohistochemical staining and Inveon Micro CT test were preformed to analyze their osteogenic capability. RESULTS: The cells'survival rate was 89%± 2% after printing. Six weeks after implantation, the samples of the control group were mostly degraded, whose shape was irregular and gel-like; the samples of the experimental group kept their original size and their texture was tough. HE staining and Masson staining showed that the bone-like tissue and vessel in-growth could be observed in the experimental group 6 weeks after implantation, immunohistochemical staining showed that the result of osteocalcin was positive, and Micro CT results showed that samples of the experimental group had a higher density and the new bone volume was 18% ± 1%. CONCLUSION: hASCs -biomaterial mixture 3D bio-printing body has capability of ectopic bone formation in nude mice, and it is feasible to apply cells-biomaterial mixture 3D bio-printing technology in the area of bone formation in vivo.

[Comparasion of clinical and technical operating time of full-crown restorations between traditional and Triple-tray impression techniques].

OBJECTIVE: To compare the difference of clinical and technical processes of full-crown restorations by using traditional and Triple-tray impression techniques, consumed materials and time estimated in every procedure of these two methods. METHODS: Four veteran clinicians were selected to carry out full-crown restorative treatment for 124 patients (130 crowns). From one impression, dentists could make casts of prepared teeth and the opposing dentition and register the interocclusal relationship.After tooth preparation,Impregum Penta polyether impression was fabricated for 76 cases(80 crowns) by Triple-tray method and 48 cases (50 crowns)by conventional method. During the whole processes, the consumption of impression materials and plaster, the time of fitting on the articulator, manufacturing procedure and try-in in clinical practice were recorded. The differences of material and time consumption in every procedure of these two methods were evaluated by Independent-Samples t test. RESULTS: The consumption of impression materials and plaster of Triple-tray impression technique was significantly less than that of traditional impression technique(P<0.01), and average time in every procedure of Triple-tray impression technique was remarkablely reduced compared with that of the traditional impression technique (P<0.01). Triple-tray impression technique reduces operating costs and the possibility of error. CONCLUSION: Compared with traditional impression technique, Triple-tray impression technique could reduce the consumption of time and materials in clinical and technical processes.

Responsive Hydrogels Based on Triggered Click Reactions for Liver Cancer.

Globally, liver cancer, which is one of the major cancers worldwide, has attracted the growing attention of technological researchers for its high mortality and limited treatment options. Hydrogels are soft 3D network materials containing a large number of hydrophilic monomers. By adding moieties such as nitrobenzyl groups to the network structure of a cross-linked nanocomposite hydrogel, the click reaction improves drug-release efficiency in vivo, which improves the survival rate and prolongs the survival time of liver cancer patients. The application of a nanocomposite hydrogel drug delivery system can not only enrich the drug concentration at the tumor site for a long time but also effectively prevents the distant metastasis of residual tumor cells. At present, a large number of researches have been working toward the construction of responsive nanocomposite hydrogel drug delivery systems, but there are few comprehensive articles to systematically summarize these discoveries. Here, this systematic review summarizes the synthesis methods and related applications of nanocomposite responsive hydrogels with actions to external or internal physiological stimuli. With different physical or chemical stimuli, the structural unit rearrangement and the controlled release of drugs can be used for responsive drug delivery in different states.

Clinical Evaluation of 532-nm Green Laser on Dentin Hypersensitivity: A Randomized Double-Blind Clinical Trial.

Objective: The aim of this study was to evaluate the therapies of low-level green laser and chemical desensitizer in the treatment of dentin hypersensitivity (DH). Methods: Forty-eight patients with 96 sensitive teeth were invited to participate in this clinical trial and were randomly divided into three groups. One group was treated with low-level green laser, the second group was treated with desensitizer [sodium fluoride (NaF)], and the third group acted as the placebo group and was treated with distilled water and placebo laser. The wavelength of green laser was 532 nm and the irradiance was 15 J/cm2 per treatment site. Hypersensitivity was assessed by visual analogue scale (VAS) according to cold test and probing at baseline. Immediately, 2 weeks, and 3 months after the application of green laser, NaF, and placebo, the participants' sensitivity level was accessed by new VAS analysis. Results: Forty-five patients with 90 teeth (n = 15 patients/group; 30 teeth/group) were followed up for 2 weeks and 3 months after treatment. There were significant differences in VAS scores between the placebo group and intervention group (green laser group and NaF group; analysis of variance, p < 0.05) at all three time points. The mean pain scores in DH reduced significantly immediately after treatment in the green laser group and NaF group when stimulated by cold and probing, whereas no significant difference was observed with these two therapies after 2 weeks (p > 0.05). After 3 months, mean VAS scores of the NaF group were higher than those of the green laser group (p < 0.01). Conclusions: Therefore, the green laser displayed similar effectiveness as NaF in treatment of DH and could be a promising new therapy to reduce DH.

[Methodology of computer-aided design of automatic artificial tooth selection for complete denture].

OBJECTIVE: To study the method of automatic tooth selection for computer-aided design in complete denture, evaluate the results by comparison with traditional denture tooth selection. METHODS: 3D data of occlusal rim made by the dentist were obtained with a 3D laser scanner and specific points on the occlusal rim were measured on Imageware11 platform. Based on Matlab 7.1 software platform, an automatic tooth selection software was programmed with adequate consideration of complete denture tooth selection factors, for example: face form of the patient, mesiodistal diameter of the artificial anterior teeth and posterior teeth, etc. Oclusal rim and edentulous models were selected from 20 patients. The artifical teeth were selected by both technician and software. The result of automatic tooth selection was evaluated by comparison with traditional method. RESULTS: In 20 cases the concordant rate of automatic and traditional method is 70%. CONCLUSION: The method of automatic tooth selection for computer-aided design in complete denture was realized in accordance with traditional method of denture tooth selection, the relationship between the curve of artificial teeth arranged on the occlusal rim and cuspid line--which was calculated accurately; automatic denture tooth selection; the denture tooth selected by software can be directly used in CAD complete denture tooth arrangement.

Intranasal infection and contact transmission of Zika virus in guinea pigs.

Zika virus (ZIKV) is primarily transmitted to humans through mosquito bites or sexual contact. The excretion and persistence of contagious ZIKV in various body fluids have been well documented in ZIKV patients; however, the risk of direct contact exposure remains unclear. Here, we show that guinea pigs are susceptible to ZIKV infection via subcutaneous inoculation route; infected guinea pigs exhibit seroconversion and significant viral secretion in sera, saliva, and tears. Notably, ZIKV is efficiently transmitted from infected guinea pigs to naïve co-caged animals. In particular, intranasal inoculation of ZIKV is fully capable of establishing infection in guinea pigs, and viral antigens are detected in multiple tissues including brain and parotid glands. Cynomolgus macaques also efficiently acquire ZIKV infection via intranasal and intragastric inoculation routes. These collective results from animal models highlight the risk of exposure to ZIKV contaminants and raise the possibility of close contact transmission of ZIKV in humans.

Osteogenic Differentiation of Three-Dimensional Bioprinted Constructs Consisting of Human Adipose-Derived Stem Cells In Vitro and In Vivo.

Here, we aimed to investigate osteogenic differentiation of human adipose-derived stem cells (hASCs) in three-dimensional (3D) bioprinted tissue constructs in vitro and in vivo. A 3D Bio-plotter dispensing system was used for building 3D constructs. Cell viability was determined using live/dead cell staining. After 7 and 14 days of culture, real-time quantitative polymerase chain reaction (PCR) was performed to analyze the expression of osteogenesis-related genes (RUNX2, OSX, and OCN). Western blotting for RUNX2 and immunofluorescent staining for OCN and RUNX2 were also performed. At 8 weeks after surgery, osteoids secreted by osteogenically differentiated cells were assessed by hematoxylin-eosin (H&E) staining, Masson trichrome staining, and OCN immunohistochemical staining. Results from live/dead cell staining showed that most of the cells remained alive, with a cell viability of 89%, on day 1 after printing. In vitro osteogenic induction of the 3D construct showed that the expression levels of RUNX2, OSX, and OCN were significantly increased on days 7 and 14 after printing in cells cultured in osteogenic medium (OM) compared with that in normal proliferation medium (PM). Fluorescence microscopy and western blotting showed that the expression of osteogenesis-related proteins was significantly higher in cells cultured in OM than in cells cultured in PM. In vivo studies demonstrated obvious bone matrix formation in the 3D bioprinted constructs. These results indicated that 3D bioprinted constructs consisting of hASCs had the ability to promote mineralized matrix formation and that hASCs could be used in 3D bioprinted constructs for the repair of large bone tissue defects.

Organic selenium resin in solid phase synthesis and its application in constructing medicinally relevant small organic molecules.

Heterocyclic compounds are of high importance in constructing active drug intermediates library. The emergence of solid-phase and combinatorial chemistry has led to renewed interest in using organoselenium resins to library drug-like production. In this mini review, we summarize the construction of heterocyclic compounds libraries such as isoxazoles, oxadiazoles, triazoles, pyrimidines, pyrrolines, indolines, benzopyrans, furans etc. using organoselenium resins. And it provided efficient and practical ways for the preparation of a variety of well-defined functional heterocyclic compounds with the advantages of good yields, high purity, straightforward operations, broad range and high diversity of the products, lack of odor, and good stability of the resins, all of these give expression to green chemistry.

[Preliminary evaluation of clinical effect of computer aided design and computer aided manufacture zirconia crown].

OBJECTIVE: To evaluate clinical effects of computer aided design and computer aided manufacturing (CAD/CAM) milled zirconia crown in three aspects: aesthetic, contact wear and fracture. METHODS: Sixty patients were divided into two groups.In one group, 35 full contour CAD/CAM zirconia crown were made on molars of 30 patients. The manufacturing process of zirconia crown was as follow. First, the three dimensional(3-D) data of working models, antagonist impression and check records were acquired by 3-D laser scanning Dental wings S50. Then full contour zirconia crowns, which had functional occlusal contacts with antagonistic teeth, and appropriate contact with adjacent teeth were designed with Zeno-CAD(V4.2.5.5.12919) software. ZENOSTAR Zr pure zirconia material was milled in digital controlled machine WIELAND 4030 M1.In the end, the zirconia crown were completed with the method of second sintering and polishing. After clinical try-in, the crown was cemented.In the control group, thirty gold alloy full crown were made and cemented on molars of 30 patients. According to the modified U S Public Health Service Criteria(USPHS) evaluation standard, all crowns were evaluated on the same day, at three months, half a year, one year and two years following delivery. There were three aspects we were focusing on in the evaluation: aesthetic, contact wear(restoration and antagonist), and fracture. RESULTS: In all the prosthesis we evaluated during the 24 months, no fracture was found. Contact wear of crowns varies according to different antagonist teeth. CONCLUSIONS: The zirconia crowns show privilege in aesthesis, toughness and anti-wearing.However, there is contact wear on antagonistic natural teeth. Thus it is a good choice when full zirconia crowns are indicated on two antagonistic teeth in both jaws.

[Features of spinal cord MRI findings and clinical follow-up study on 8 children with hand-foot-and-mouth disease and acute flaccid paralysis].

OBJECTIVE: To understand the features of magnetic resonance imaging (MRI) findings and the results of clinical follow-up study in 8 infants and children with hand-foot-and-mouth disease (HFMD) complicated with acute flaccid paralysis (AFP) who were admitted to Beijing Ditan Hospital during the outbreak of HFMD in 2008. METHODS: The clinical characteristics of the 8 HFMD cases were investigated, and MRI findings were analyzed. The recovery of their impairment in limbs was followed up for three months. RESULTS: All the 8 cases showed poliomyelitis-like syndrome. MRI of spinal cord showed unilateral or bilateral hyperintense lesions which chiefly occurred in the anterior horn regions of the spinal cord (C(2)-C(7) or T(12)-L(1)) on T(1)/T(2)-weighted images. Lesions of spinal cord chiefly occurred in T(12)-L(1). Most of the cases showed mild paralysis, which occurred in more than half of cases in single lower extremity. The patients who had acute paralysis of single lower extremity recovered faster than those with paralysis of four limbs. CONCLUSIONS: In HFMD with AFP cases, MRI of spinal cord showed unilateral or bilateral lesions in the anterior horn regions of the spinal cord (C(2)-C(7) or T(12)-L(1)) on T(1)/T(2)-weighted images. AFP may be to some degree reversible in HFMD cases. MRI can directly and completely show the range and degree of changes associated with AFP in HFMD cases, thus provide instructive suggestions to its treatment. The acute paralysis of HFMD cases may be benefited from earlier treatment for AFP.

Solid-phase synthesis of linked heterocycles from a selenopolystyrene resin.

A linked heterocycle library of isoxazoles, 1,2,3-triazoles, bicyclo[2.2.1]hepta-2,5-diene or 4-methylcyclohexa-1,3-diene and 1,2,4-oxadiazoles was prepared by solid-phase organic synthesis. Key steps on resin-bound selenium were electrophilic additions; 1,3-dipolar cycloaddition; Porco's two-step, one-pot condensation of amidoxime and carboxylate; and Diels-Alder reaction.