Atypical neural encoding of faces in individuals with autism spectrum disorder.

Individuals with autism spectrum disorder (ASD) experience pervasive difficulties in processing social information from faces. However, the behavioral and neural mechanisms underlying social trait judgments of faces in ASD remain largely unclear. Here, we comprehensively addressed this question by employing functional neuroimaging and parametrically generated faces that vary in facial trustworthiness and dominance. Behaviorally, participants with ASD exhibited reduced specificity but increased inter-rater variability in social trait judgments. Neurally, participants with ASD showed hypo-activation across broad face-processing areas. Multivariate analysis based on trial-by-trial face responses could discriminate participant groups in the majority of the face-processing areas. Encoding social traits in ASD engaged vastly different face-processing areas compared to controls, and encoding different social traits engaged different brain areas. Interestingly, the idiosyncratic brain areas encoding social traits in ASD were still flexible and context-dependent, similar to neurotypicals. Additionally, participants with ASD also showed an altered encoding of facial saliency features in the eyes and mouth. Together, our results provide a comprehensive understanding of the neural mechanisms underlying social trait judgments in ASD.

The Saururus chinensis genome provides insights into the evolution of pollination strategies and herbaceousness in magnoliids.

Saururus chinensis, an herbaceous magnoliid without perianth, represents a clade of early-diverging angiosperms that have gone through woodiness-herbaceousness transition and pollination obstacles: the characteristic white leaves underneath inflorescence during flowering time are considered a substitute for perianth to attract insect pollinators. Here, using the newly sequenced S. chinensis genome, we revisited the phylogenetic position of magnoliids within mesangiosperms, and recovered a sister relationship for magnoliids and Chloranthales. By considering differentially expressed genes, we identified candidate genes that are involved in the morphogenesis of the white leaves in S. chinensis. Among those genes, we verified - in a transgenic experiment with Arabidopsis - that increasing the expression of the "pseudo-etiolation in light" gene (ScPEL) can inhibit the biosynthesis of chlorophyll. ScPEL is thus likely responsible for the switches between green and white leaves, suggesting that changes in gene expression may underlie the evolution of pollination strategies. Despite being an herbaceous plant, S. chinensis still has vascular cambium and maintains the potential for secondary growth as a woody plant, because the necessary machinery, i.e., the entire gene set involved in lignin biosynthesis, is well preserved. However, similar expression levels of two key genes (CCR and CAD) between the stem and other tissues in the lignin biosynthesis pathway are possibly associated with the herbaceous nature of S. chinensis. In conclusion, the S. chinensis genome provides valuable insights into the adaptive evolution of pollination in Saururaceae and reveals a possible mechanism for the evolution of herbaceousness in magnoliids.

Nanoplastic Stimulates the Amyloidogenesis of Parkinson's Alpha-Synuclein NACore.

Environmental plastic wastes are potential health hazards due to their prevalence as well as their versatility in initiating physical, chemical, and biological interactions and transformations. Indeed, recent research has implicated the adverse effects of micro- and nano-plastics, including their neurotoxicity, yet how plastic particulates may impact the aggregation pathway and toxicity of amyloid proteins pertinent to the pathologies of neurological diseases remains unknown. Here, electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS) is employed to reveal the polymorphic oligomerization of NACore, a surrogate of alpha-synuclein that is associated with the pathogenesis of Parkinson's disease. These data indicate that the production rate and population of the NACore oligomers are modulated by their exposure to a polystyrene nanoplastic, and these cellular assays further reveal an elevated NACore toxicity in microglial cells elicited by the nanoplastic. These simulations confirm that the nanoplastic-NACore association is promoted by their hydrophobic interactions. These findings are corroborated by an impairment in zebrafish hatching, survival, and development in vivo upon their embryonic exposure to the nanoplastic. Together, this study has uncovered the dynamics and mechanism of amyloidogenesis elevated by a nanoplastic trigger, shedding a new light on the neurological burden of plastic pollution.

Nanosized Porphyrin-Containing Covalent Organic Polymer to Enhance Ferroptosis in Photodynamic Treatment of Tumor Cells via Glutathione Depletion.

A porphyrin-containing nanoscale covalent organic polymer (COP) was fabricated from 5,10,15,20-tetra(4-carboxyphenyl)porphyrin (TCPP) and cystamine via an acylation reaction. On the one hand, TCPP can induce tumor cell death by laser irradiation. Due to the presence of disulfide bonds of cystamine which can react with glutathione, it exhibits depletion of glutathione and accumulation of peroxides in tumor cells. Ultimately by the hyaluronic acid to encapsulate the COP to get S-COP@HA, the nanoparticle with a size of 168.6 nm also exhibits good tumor accumulation and biosafety. Significant inhibition of tumor cell growth was observed after two consecutive doses of S-COP@HA at relatively low laser densities. This combination therapy was proved to reduce the level of reduced glutathione in tumor cells, where ferroptosis occurs after photodynamic treatment. Overall, this study presents a potent, good therapeutic option for the effective enhancement of photodynamic therapy by glutathione depletion.

Nanocomposite Hydrogel Bioinks for 3D Bioprinting of Tumor Models.

In vitro tumor models were successfully constructed by 3D bioprinting; however, bioinks with proper viscosity, good biocompatibility, and tunable biophysical and biochemical properties are highly desirable for tumor models that closely recapitulated the main features of native tumors. Here, we developed a nanocomposite hydrogel bioink that was used to construct ovarian and colon cancer models by 3D bioprinting. The nanocomposite bioink was composed of aldehyde-modified cellulose nanocrystals (aCNCs), aldehyde-modified hyaluronic acid (aHA), and gelatin. The hydrogels possessed tunable gelation time, mechanical properties, and printability by controlling the ratio between aCNCs and gelatin. In addition, ovarian and colorectal cancer cells embedded in hydrogels showed high survival rates and rapid growth. By the combination of 3D bioprinting, ovarian and colorectal tumor models were constructed in vitro and used for drug screening. The results showed that gemcitabine had therapeutic effects on ovarian tumor cells. However, the ovarian tumor model showed drug resistance for oxaliplatin treatment.

Relationship between Composition and Environmental Degradation of Poly(isosorbide-co-diol oxalate) (PISOX) Copolyesters.

To reduce the global CO2 footprint of plastics, bio- and CO2-based feedstock are considered the most important design features for plastics. Oxalic acid from CO2 and isosorbide from biomass are interesting rigid building blocks for high Tg polyesters. The biodegradability of a family of novel fully renewable (bio- and CO2-based) poly(isosorbide-co-diol) oxalate (PISOX-diol) copolyesters was studied. We systematically investigated the effects of the composition on biodegradation at ambient temperature in soil for PISOX (co)polyesters. Results show that the lag phase of PISOX (co)polyester biodegradation varies from 0 to 7 weeks. All (co)polyesters undergo over 80% mineralization within 180 days (faster than the cellulose reference) except one composition with the cyclic codiol 1,4-cyclohexanedimethanol (CHDM). Their relatively fast degradability is independent of the type of noncyclic codiol and results from facile nonenzymatic hydrolysis of oxalate ester bonds (especially oxalate isosorbide bonds), which mostly hydrolyzed completely within 180 days. On the other hand, partially replacing oxalate with terephthalate units enhances the polymer's resistance to hydrolysis and its biodegradability in soil. Our study demonstrates the potential for tuning PISOX copolyester structures to design biodegradable plastics with improved thermal, mechanical, and barrier properties.

Sulfonate-Containing Polyelectrolytes for Perovskite Modification: Chemical Configuration, Property, and Performance.

Three sulfonate-containing polyelectrolytes are elaborately designed and used to passivate perovskite film with the anti-solvent method. Under the influence of the secondary monomer, three copolymers present various chemical configurations and deliver different modification effects. Fluorene-thiophene copolymer STF has linear and highly-conjugated chain. STF-perovskite film presents large crystal grains. Fluorene-carbazole copolymer SCF has flexible chain and easily enters into grain boundary areas. SCF-perovskite film is homogenous and continuous. Fluorene-fluorene copolymer SPF agglomerates on the surface and is not applicable to the anti-solvent method. The full investigation demonstrates that STF and SCF not only conduct surface defect passivation, but also improve the film quality by being involved in the perovskite's crystallization process. Compared with the control device, the devices with STF and SCF deliver high efficiency and excellent stability. The unencapsulated devices with STF and SCT maintain ≈80% of the initial power conversion efficiency (PCE) after 40 days of storage under 30-40% relative humidity. SCF performs better and the device maintains 60% of the initial PCE after 20 days of storage under 60-80% relative humidity.

Simultaneous removal of ammonia nitrogen, phosphate, zinc, and phenol by degradation of cellulose in composite mycelial pellet bioreactor: Enhanced performance and community co-assembly mechanism.

In this experiment, the prepared tea biochar-cellulose@LDH material (TB-CL@LDH) was combined with mycelium pellets to form the composite mycelial pellets (CMP), then assembled and immobilized with strains Pseudomonas sp. Y1 and Cupriavidus sp. ZY7 to construct a bioreactor. At the best operating parameters, the initial concentrations of phosphate (PO43--P), ammonia nitrogen (NH4+-N), chemical oxygen demand (COD), zinc (Zn2+), and phenol were 22.3, 25.0, 763.8, 1.0, and 1.0 mg L-1, the corresponding removal efficiencies were 80.4, 87.0, 83.4, 91.8, and 96.6%, respectively. Various characterization analyses demonstrated that the strain Y1 used the additional carbon source produced by the strain ZY7 degradation of cellulose to enhance the removal of composite pollutants and clarified the principle of Zn2+ and PO43--P removal by adsorption, co-precipitation and biomineralization. Pseudomonas and Cupriavidus were the dominant genera according to the high-throughput sequencing. As shown by KEGG results, nitrification and denitrification genes were affected by phenol. The study offers prospects for the simultaneous removal of complex pollutants consisting of NH4+-N, PO43--P, Zn2+, and phenol.

Gene therapy by virus-like self-spooling toroidal DNA condensates for revascularization of hindlimb ischemia.

Peripheral arterial diseases (PAD) have been reported to be the leading cause for limb amputations, and the current therapeutic strategies including antiplatelet medication or intervene surgery are reported to not clinically benefit the patients with high-grade PAD. To this respect, revascularization based on angiogenetic vascular endothelial growth factor (VEGF) gene therapy was attempted for the potential treatment of critical PAD. Aiming for transcellular delivery of VEGF-encoding plasmid DNA (pDNA), we proposed to elaborate intriguing virus-like DNA condensates, wherein the supercoiled rigid micrometer-scaled plasmid DNA (pDNA) could be regulated in an orderly fashion into well-defined nano-toroids by following a self-spooling process with the aid of cationic block copolymer poly(ethylene glycol)-polylysine at an extraordinary ionic strength (NaCl: 600 mM). Moreover, reversible disulfide crosslinking was proposed between the polylysine segments with the aim of stabilizing these intriguing toroidal condensates. Pertaining to the critical hindlimb ischemia, our proposed toroidal VEGF-encoding pDNA condensates demonstrated high levels of VEGF expression at the dosage sites, which consequently contributed to the neo-vasculature (the particularly abundant formation of micro-vessels in the injected hindlimb), preventing the hindlimb ischemia from causing necrosis at the extremities. Moreover, excellent safety profiles have been demonstrated by our proposed toroidal condensates, as opposed to the apparent immunogenicity of the naked pDNA. Hence, our proposed virus-like DNA condensates herald potentials as gene therapy platform in persistent expressions of the therapeutic proteins, and might consequently be highlighted in the management of a variety of intractable diseases.

Influence on the temporomandibular joint induced by mandibular malpositioning caused by vertical dimension elevation and occlusal loss in adult rats: An imaging, histological and immunohistochemical study.

BACKGROUND: Mandibular malpositioning may result in an abnormal concentration of stresses within the temporomandibular joint (TMJ) in adult rats, which may further lead to a series of pathological changes, such as articular cartilage wear, subchondral bone sclerosis and osteophyte formation. However, the pathological and adaptive changes in condylar cartilage caused by different stress distributions are still controversial. OBJECTIVE: The aim of this study was to observe the effect of sagittal changes in mandibular position on condylar cartilage by changing the occlusal vertical dimension (OVD) in adult rats. METHODS: Fifteen-week-old female rats were divided into three groups: control (CON), increased OVD (iOVD) and loss of occlusion (LO) groups. An occlusal plate and tooth extraction were used to establish the animal model. TMJ samples of the experimental and CON groups were observed and investigated by bone morphological, histomorphological and immunohistochemical staining analyses at 3 days, 1 week, 2 weeks, 4 weeks and 8 weeks. Weight curves were plotted. RESULTS: Micro-computed tomography showed that, compared with the CON group, cartilage destruction followed by repair occurred in both experimental groups, which was similar to the trend observed in haematoxylin-eosin staining. All experimental results for the iOVD group showed an approximately similar time trend. Compared with the iOVD group, the toluidine blue and immunohistochemical staining results in the LO group showed no obvious change trend over time. CONCLUSION: Compared with occlusal loss, an increase in OVD caused faster and more severe damage to condylar cartilage, and subchondral bone repair occurred later.

Deep learning in the diagnosis for cystic lesions of the jaws: a review of recent progress.

Cystic lesions of the gnathic bones present challenges in differential diagnosis. In recent years, artificial intelligence (AI) represented by deep learning (DL) has rapidly developed and emerged in the field of dental and maxillofacial radiology (DMFR). Dental radiography provides a rich resource for the study of diagnostic analysis methods for cystic lesions of the jaws and has attracted many researchers. The aim of the current study was to investigate the diagnostic performance of DL for cystic lesions of the jaws. Online searches were done on Google Scholar, PubMed, and IEEE Xplore databases, up to September 2023, with subsequent manual screening for confirmation. The initial search yielded 1862 titles, and 44 studies were ultimately included. All studies used DL methods or tools for the identification of a variable number of maxillofacial cysts. The performance of algorithms with different models varies. Although most of the reviewed studies demonstrated that DL methods have better discriminative performance than clinicians, further development is still needed before routine clinical implementation due to several challenges and limitations such as lack of model interpretability, multicentre data validation, etc. Considering the current limitations and challenges, future studies for the differential diagnosis of cystic lesions of the jaws should follow actual clinical diagnostic scenarios to coordinate study design and enhance the impact of AI in the diagnosis of oral and maxillofacial diseases.

A comparative study of the application of three digital imaging techniques to assess the thickness of the palatal mucosa of the maxillary anterior teeth.

BACKGROUND: This study highlights the need for precise and efficient methods to measure palatal mucosal thickness in the maxillary anterior teeth, particularly for soft tissue augmentation in the aesthetic zone. The research evaluates three digital imaging techniques, suggesting that Cone Beam Computed Tomography (CBCT) combined with intraoral scanners (IOS) is a promising approach for reliable clinical assessment. METHODS: Ten volunteers with healthy periodontium were selected, and three methods were employed: CBCT-based indirect gingival imaging, modified soft tissue CBCT (ST-CBCT), and CBCT combined with IOS. Measurements of palatal mucosal thickness were taken at multiple points along the palatal gingival margin. Statistical analysis included Bland-Altman plots for method agreement and intraclass Correlation Coefficient (ICC) analysis for reliability. All measurements were standardized, repeated for consistency, and accurate to 0.01 mm to ensure reliability. RESULTS: The Bland-Altman plots showed that less than 5% of the points for palatal mucosal thickness differences measured by the gingival indirect radiographic method, modified ST-CBCT, and CBCT combined with IOS were located outside the 95% limits of agreement (LoA). The mean value of the differences was within 0.2 mm, indicating good clinical agreement among the three methods. The inter- and intra-study ICC values for palatal mucosal thickness measurements of the maxillary anterior teeth using the three CBCT methods were greater than 0.75 (P < 0.001), demonstrating reproducibility. CONCLUSIONS: Based on the evaluation of three digital imaging techniques, this study indicates that the combination of CBCT with IOS is a feasible method for measuring palatal mucosal thickness in the maxillary anterior teeth and demonstrates good reproducibility.

Dual-Targeting Biomimetic Semiconducting Polymer Nanocomposites for Amplified Theranostics of Bone Metastasis.

Bone metastasis is a type of metastatic tumors that involves the spreads of malignant tumor cells into skeleton, and its diagnosis and treatment remain a big challenge due to the unique tumor microenvironment. We herein develop osteoclast and tumor cell dual-targeting biomimetic semiconducting polymer nanocomposites (SPFeNOC ) for amplified theranostics of bone metastasis. SPFeNOC contain semiconducting polymer and iron oxide (Fe3 O4 ) nanoparticles inside core and surface camouflaged hybrid membrane of cancer cells and osteoclasts. The hybrid membrane camouflage enables their targeting to both metastatic tumor cells and osteoclasts in bone metastasis through homologous targeting mechanism, thus achieving an enhanced nanoparticle accumulation in tumors. The semiconducting polymer mediates near-infrared (NIR) fluorescence imaging and sonodynamic therapy (SDT), and Fe3 O4 nanoparticles are used for magnetic resonance (MR) imaging and chemodynamic therapy (CDT). Because both cancer cells and osteoclasts are killed synchronously via the combinational action of SDT and CDT, the vicious cycle in bone metastasis is broken to realize high antitumor efficacy. Therefore, 4T1 breast cancer-based bone metastasis can be effectively detected and cured by using SPFeNOC as dual-targeting theranostic nanoagents. This study provides an unusual biomimetic nanoplatform that simultaneously targets osteoclasts and cancer cells for amplified theranostics of bone metastasis.

Protein Recognition Based on Temperature-Stimulated Multiparameter Response Virtual Array Sensing Strategy.

In the field of array sensing, researchers are committed to miniaturizing array sensing systems while ensuring the acquisition of multiple sensing information. Here, a new strategy called "stimulus responsive array sensing" was presented to obtain virtual multiple sensing without constructing multiple physical sensing units. Based on bioluminescence resonance energy transfer, where luciferase acts as the donor and temperature stimulus response polymers act as the receptors, by using only one sensing unit to output multiple stimulus responsive sensing signals in temperature dimension, an equivalent array sensing could be achieved. This strategy can distinguish and quantify a variety of proteins. More importantly, glucose responsive monomers were doped in polymers; thus, more virtual sensing units can be further increased to obtain more sensing signals, greatly increasing the accuracy of protein recognition, and it can also be used to differentiate several compositions of protein under different glucose concentrations in urine caused by different renal diseases. The results show the potential of the "stimulus responsive array sensing" for analyzing molecular compositions in complex biological systems and show a new tack in array sensing.

A Bacterial Nanomedicine Combines Photodynamic-Immunotherapy and Chemotherapy for Enhanced Treatment of Oral Squamous Cell Carcinoma.

Bacterial therapy is an emerging hotspot in tumor immunotherapy, which can initiate antitumor immune activation through multiple mechanisms. Porphyromonas gingivalis (Pg), a pathogenic bacterium inhabiting the oral cavity, contains a great deal of pathogen associated molecular patterns that can activate various innate immune cells to promote antitumor immunity. Owing to the presence of protoporphyrin IX (PpIX), Pg is also an excellent photosensitizer for photodynamic therapy (PDT) via the in situ generation of reactive oxygen species. This study reports a bacterial nanomedicine (nmPg) fabricated from Pg through lysozyme degradation, ammonium chloride lysis, and nanoextrusion, which has potent PDT and immune activation performances for oral squamous cell carcinoma (OSCC) treatment. To further promote the tumoricidal efficacy, a commonly used chemotherapeutic drug doxorubicin (DOX) is efficiently encapsulated into nmPg through a simple incubation method. nmPg/DOX thus prepared exhibits significant synergistic effects on inhibiting the growth and metastasis of OSCC both in vitro and in vivo via photodynamic-immunotherapy and chemotherapy. In summary, this work develops a promising bacterial nanomedicine for enhanced treatment of OSCC.

A Sewing Approach to the Fabrication of Eco/bioresorbable Electronics.

Eco/bioresorbable electronics represent an emerging class of technology defined by an ability to dissolve or otherwise harmlessly disappear in environmental or biological surroundings after a period of stable operation. The resulting devices provide unique capabilities as temporary biomedical implants, environmental sensors, and related systems. Recent publications report schemes to overcome challenges in fabrication that follow from the low thermostability and/or high chemical reactivity of the eco/bioresorbable constituent materials. Here, this work reports the use of high-speed sewing machines, as the basis for a high-throughput manufacturing technique that addresses many requirements for these applications, without the need for high temperatures or reactive solvents. Results demonstrate that a range of eco/bioresorbable metal wires and polymer threads can be embroidered into complex, user-defined conductive patterns on eco/bioresorbable substrates. Functional electronic components, such as stretchable interconnects and antennas are possible, along with fully integrated systems. Examples of the latter include wirelessly powered light-emitting diodes, radiofrequency identification tags, and temporary cardiac pacemakers. These advances add to a growing range of options in high-throughput, automated fabrication of eco/bioresorbable electronics.

Microbiota profiles in the saliva, cancerous tissues and its companion paracancerous tissues among Chinese patients with lung cancer.

BACKGROUND: Despite the growing interest in the impact of the gut microbiome on cancer, the relationship between the lung microbiome and lung cancer has received limited investigation. Additionally, the composition of the oral microbiome was found to differ from that of individuals with lung cancer, indicating that these microorganisms may serve as potential biomarkers for the detection of lung cancer. METHODS: Forty-three Chinese lung cancer patients were enrolled in the current retrospective study and 16 S rRNA sequencing was performed on saliva, cancerous tissue (CT) and paracancerous tissue (PT) samples. RESULTS: Diversity and species richness were significantly different between the oral and lung microbiota. Lung microbiota were largely composed of the phyla Proteobacteria, Firmicutes, Bacteroidetes and Actinobacteria. The relative abundance of Promicromonosporacea and Chloroflexi increased in CT, while Enterococcaceae and Enterococcus were enriched in PT (p<0.05). A cancer-related microbiota model was constructed and produced an area under the curve of 0.74 in the training set, indicating discrimination between subjects with and without cancer. CONCLUSIONS: Characterization of microbiota in saliva, CT and PT from Chinese lung cancer patients revealed little difference between CT and PT, indicating that the tumor and its microenvironment might influence the local microbiome. A model to distinguish between CT and PT was constructed, which has the potential to enhance our comprehension of the involvement of microbiota in the pathogenesis of lung cancer and identify novel therapeutic targets.

Shield, Anchor, and Adhesive Roles of Methylene Blue in Tyrosinase Adsorbed on Carbon Felt for a Flow Injection Amperometric Enzyme Biosensor for Phenolic Substrates and Inhibitors.

Methylene blue (MB) acted as a stabilizer for preventing surface-induced denaturation of tyrosinase (TYR) adsorbed on a carbon felt (CF) surface, which is based on shield and anchor roles preventing the unfavorable conformational change of TYR on the hydrophobic CF surface. Furthermore, MB acted as an effective adhesive for TYR immobilization on CF. The resulting TYR and MB coadsorbed CF (TYR/MB-CF) worked as an excellent working electrode unit in an electrochemical detector in a flow injection amperometric biosensor, which allowed highly sensitive consecutive determination of not only TYR substrates but also competitive inhibitors. Simultaneous adsorption of TYR and MB from their mixed solution was much useful as compared with step-wise separated adsorption of TYR on the MB-adsorbed CF, which suggests that the binding interaction of MB with TYR in the solution phase is important for this phenomenon. Fluorescence and UV-vis spectroscopy revealed that not only electrostatic forces between the cationic MB and anionic amino acid residues of TYR but also hydrophobic interactions via the phenothiazine ring of MB play a principal binding driving force of MB with TYR at the surface of the TYR molecules. Synchronous fluorescence, three-dimensional fluorescence, and circular dichroism (CD) spectroscopy clarified that the conformation and the secondary structure of TYR slightly changed upon the MB binding, implying that MB binding leads to the modification of the original intramolecular bonding in part.

Factors related to microimplant-assisted rapid palatal expansion in teenagers and young adults: A cone-beam computed tomography study.

INTRODUCTION: For patients with maxillary transverse deficiency, selecting an appropriate therapeutic method is important for the treatment effect and prognosis. Our study aimed to explore factors related to microimplant-assisted rapid palatal expansion (MARPE) in teenagers and young adults using cone-beam computed tomography. METHODS: Twenty-five patients who underwent MARPE were included in this retrospective study from February 2014 to June 2019. Midpalatal suture density (MPSD) ratio, midpalatal suture maturation (MPSM), bone effect, dentoalveolar effect, and dental effect in maxillary first molar were evaluated using cone-beam computed tomography. Spearman correlation analysis was used to analyze the correlation between the MPSD ratio, MPSM, age, and the expansion amount generated by MARPE. RESULTS: Twenty-five patients (mean age, 19.84 ± 3.96 years; range, 15-29 years) with maxillary transverse deficiency were analyzed. Age was negatively correlated with bone expansion, alveolar expansion, and alveolar change (all P <0.05). There was a negative correlation between MPSM and nasal cavity variation, bone expansion, and alveolar change (all P <0.05). The bone expansion was negatively correlated with MPSD ratio 3 (r = -0.417; P <0.05) and MPSD ratio 4 (all P <0.05). CONCLUSIONS: Age, MPSM, and MPSD ratio were significantly related to the MARPE effect. Age, MPSM, and MPSD ratio should be considered when choosing MARPE.

Foot-and-Mouth Disease Virus VP3 Protein Acts as a Critical Proinflammatory Factor by Promoting Toll-Like Receptor 4-Mediated Signaling.

Foot-and-mouth disease virus (FMDV) infection in cloven-hoofed animals causes severe inflammatory symptoms, including blisters on the oral mucosa, hoof, and breast; however, the molecular mechanism underlying the inflammatory response is unclear. In this study, we provide the first evidence that the FMDV protein VP3 activates lipopolysaccharide-triggered Toll-like receptor 4 (TLR4) signaling. FMDV VP3 increased the expression of TLR4 by downregulating the expression of the lysozyme-related protein Rab7b. Additionally, Rab7b can interact with VP3 to promote the replication of FMDV. Our findings suggested that VP3 regulates the Rab7b-TLR4 axis to mediate the inflammatory response to FMDV. IMPORTANCE Foot-and-mouth disease virus (FMDV) infection causes a severe inflammatory response in cloven-hoofed animals, such as pigs, cattle, and sheep, with typical clinical manifestations of high fever, numerous blisters on the oral mucosa, hoof, and breast, as well as myocarditis (tigroid heart). However, the mechanism underlying the inflammatory response caused by FMDV is enigmatic. In this study, we identified the VP3 protein of FMDV as an important proinflammatory factor. Mechanistically, VP3 interacted with TLR4 to promote TLR4 expression by inhibiting the expression of the lysozyme-related protein Rab7b. Our findings suggest that FMDV VP3 is a major proinflammatory factor in FMDV-infected hosts.