Is adding biochar be better than crop straw for improving soil aggregates stability and organic carbon contents in film mulched fields in semiarid regions? -Evidence of 5-year field experiment.

Plastic film mulching is used widely to increase crop yields in semiarid areas, but improving the soil fertility in film mulched fields is also important for achieving sustainable high yields in northwest of China. In this study, a completely randomized two-factor field design experiment was conducted in Pengyang, Ningxia, China during 2017-2021. In order to investigate the effects of plastic film mulching with straw/biochar addition on the soil aggregate characteristics, organic carbon content, and maize yield. Six treatments were established as follows: control (C), straw (S), biochar (B), plastic film mulching (F), plastic film mulching with added straw (FS) or biochar (FB). After 5 years of continuous production, each straw and biochar addition treatments significantly improved the soil aggregate distribution and stability, and the average aggregate content >0.25 mm increased significantly by 47.32%. Compared with the treatments without plastic film mulching, the mean weight diameter and geometric mean diameter of the soil particles increased by 9.19% and 4.15%, respectively, under the plastic film mulching treatments. The organic carbon content of the 0-60 cm soil layer increased significantly under each straw and biochar addition treatment compared with the without straw. The aggregate organic carbon contents under each treatment increased as the aggregate particle size increased, where the straw and biochar addition treatments significantly increased the organic carbon content of the aggregates, whereas the contents decreased under the plastic film mulching treatments. The contributions of the soil aggregates >0.25 mm to the organic carbon contents of the 0-60 cm soil layer were significantly higher under FS (37.63%) and FB (56.45%) than F. Structural equation modeling showed that straw/biochar added, plastic film mulching, and a greater soil organic carbon content could significantly promote yield increases, where the straw and biochar addition treatments significantly increased the average maize by 14.6% on average. In conclusion, carbon input as straw, especially biochar, had a positive effect on improving the soil organic carbon content and maize yield under plastic film mulching farmland in a semiarid region.

All-Aqueous Nanoprecipitation: Spontaneous Formation of Hydrogen-Bonded Nanoparticles and Nanocapsules Mediated by Phase Separation of Poly(N-Isopropylacrylamide).

Spontaneous formation of polymer nanoparticles of well-defined, <100 nm sizes with controlled solid/hollow morphology and fluorescent properties is reported. The nanoparticle formation is assisted by temperature-triggered nucleation of an amphiphilic polymer-poly(N-isopropylacrylamide) (PNIPAM)-and mediated by hydrogen bonding of the emerged nuclei with tannic acid (TA). The pH of solution and TA/PNIPAM ratios are explored as parameters that define TA/PNIPAM assembly. Well-defined nanoparticles are formed in a wide range of neutral pH when the TA/PNIPAM ratio exceeds its critical, pH-dependent value. Dynamic light scattering and zeta potential measurements as well as atomic force microscopy and electron energy loss spectroscopy indicate that solid nanoparticles or nanocapsules are formed depending on the solution pH and that enhanced ionization of TA favors hollow morphology. Nanocapsules exhibit label-free fluorescence at neutral pH values and therefore can be useful in imaging applications.

Transport behavior of microplastics in soil‒water environments and its dependence on soil components.

Microplastic (MP) pollution has become a global concern, and the transport behavior of MPs in soil-water systems is vital in determining their distribution and potential risks to the subsurface environment. To reveal the role of various soil components on MP migration, the downward transport behavior of polystyrene (PS) MPs were explored in this study via column experiments with mono or multi-soil components as porous media. Compared with the selected soil mineral volcanic rock (VR) and fine river sand (RS), condensed soil organic matter (SOM) resulted in higher transport efficiencies for PS microparticles, with greater than 90% total mass recovery under the experimental conditions. The more surface charges of SOM than minerals contribute to the high migration efficiency of PS MPs, and electrostatic repulsion is assumed a significant driving mechanism in the migration of negatively charged PS particles in soils. The ionic strength of porewater influenced the PS migration behaviors by altering the electrostatic interactions between the MPs and soil grains. The uniform mixing of SOM with mineral grains significantly enhanced the transport efficiency of PS MPs in the columns. The results provide supports for the prediction and prevention of the risks of MPs to the subsurface environment.

Decellularized Brain Extracellular Matrix Hydrogel Aids the Formation of Human Spinal-Cord Organoids Recapitulating the Complex Three-Dimensional Organization.

The intricate electrophysiological functions and anatomical structures of spinal cord tissue render the establishment of in vitro models for spinal cord-related diseases highly challenging. Currently, both in vivo and in vitro models for spinal cord-related diseases are still underdeveloped, complicating the exploration and development of effective therapeutic drugs or strategies. Organoids cultured from human induced pluripotent stem cells (hiPSCs) hold promise as suitable in vitro models for spinal cord-related diseases. However, the cultivation of spinal cord organoids predominantly relies on Matrigel, a matrix derived from murine sarcoma tissue. Tissue-specific extracellular matrices are key drivers of complex organ development, thus underscoring the urgent need to research safer and more physiologically relevant organoid culture materials. Herein, we have prepared a rat decellularized brain extracellular matrix hydrogel (DBECMH), which supports the formation of hiPSC-derived spinal cord organoids. Compared with Matrigel, organoids cultured in DBECMH exhibited higher expression levels of markers from multiple compartments of the natural spinal cord, facilitating the development and maturation of spinal cord organoid tissues. Our study suggests that DBECMH holds potential to replace Matrigel as the standard culture medium for human spinal cord organoids, thereby advancing the development of spinal cord organoid culture protocols and their application in in vitro modeling of spinal cord-related diseases.

Human Placenta Decellularized Extracellular Matrix Hydrogel Promotes the Generation of Human Spinal Cord Organoids with Dorsoventral Organization from Human Induced Pluripotent Stem Cells.

Spinal cord organoids are of significant value in the research of spinal cord-related diseases by simulating disease states, thereby facilitating the development of novel therapies. However, the complexity of spinal cord structure and physiological functions, along with the lack of human-derived inducing components, presents challenges in the in vitro construction of human spinal cord organoids. Here, we introduce a novel human decellularized placenta-derived extracellular matrix hydrogel (DPECMH) and, combined with a new induction protocol, successfully construct human spinal cord organoids. The human placenta-sourced decellularized extracellular matrix (dECM), verified through hematoxylin and eosin staining, DNA quantification, and immunofluorescence staining, retained essential ECM components such as elastin, fibronectin, type I collagen, laminin, and so forth. The temperature-sensitive hydrogel made from human placenta dECM demonstrated good biocompatibility and promoted the differentiation of human induced pluripotent stem cell (hiPSCs)-derived spinal cord organoids into neurons. It displayed enhanced expression of laminar markers in comparison to Matrigel and showed higher expression of laminar markers compared to Matrigel, accelerating the maturation process of spinal cord organoids and demonstrating its potential as an organoid culture substrate. DPECMH has the potential to replace Matrigel as the standard additive for human spinal cord organoids, thus advancing the development of spinal cord organoid culture protocols and their application in the in vitro modeling of spinal cord-related diseases.

Retention and transport behavior of microplastic particles in water-saturated porous media.

Microplastic (MP) pollution has become a global concern given its wide occurrence and potential ecological risks. The retention/transport features of MPs in porous media govern the fate and risks of MPs in subsurface environments. Polystyrene (PS) microspheres are employed as representative MPs to explore the migration behaviors in water-saturated quartz sand columns. The hydrodynamic size mainly determines the deposition and size exclusion straining of MPs in porous media, and further the attachment efficiency. PS50 (PS with 50 nm diameter) shows a total migration rate greater than 85% in each of the studied conditions. In contrast, PS500 commonly exhibits slower migration velocities and higher attachment efficiencies than those of PS50 and PS100. The ionic strength, pH, and dissolved organic matter content of the solution show obvious effects on the retention/transport of PS MPs. The influences of solution chemical properties are consistent with the prediction of Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The results in this study clarify the size-dependent migration characteristics of MPs in porous media and provide a basis for risk assessment of MPs in terrestrial environments.

The crosstalk between macrophages and bone marrow mesenchymal stem cells in bone healing.

Bone injury plagues millions of patients worldwide every year, and it demands a heavy portion of expense from the public medical insurance system. At present, orthopedists think that autologous bone transplantation is the gold standard for treating large-scale bone defects. However, this method has significant limitations, which means that parts of patients cannot obtain a satisfactory prognosis. Therefore, a basic study on new therapeutic methods is urgently needed. The in-depth research on crosstalk between macrophages (Mϕs) and bone marrow mesenchymal stem cells (BMSCs) suggests that there is a close relationship between inflammation and regeneration. The in-depth understanding of the crosstalk between Mϕs and BMSCs is helpful to amplify the efficacy of stem cell-based treatment for bone injury. Only in the suitable inflammatory microenvironment can the damaged tissues containing stem cells obtain satisfactory healing outcomes. The excessive tissue inflammation and lack of stem cells make the transplantation of biomaterials necessary. We can expect that the crosstalk between Mϕs and BMSCs and biomaterials will become the mainstream to explore new methods for bone injury in the future. This review mainly summarizes the research on the crosstalk between Mϕs and BMSCs and also briefly describes the effects of biomaterials and aging on cell transplantation therapy.

An Ultrahigh Linear Sensitive Temperature Sensor Based on PANI:Graphene and PDMS Hybrid with Negative Temperature Compensation.

The detection of human body temperature is one of the important indicators to reflect the physical condition. In order to accurately judge the state of the human body, a high-performance temperature sensor with fast response, high sensitivity, and good linearity characteristics is urgently needed. In this paper, the positive temperature characteristics of graphene-polydimethylsiloxane (PDMS) composite with high sensitivity were studied. Besides, doping polyaniline (PANI) with special negative temperature characteristics as the temperature compensation of the composite finally creatively solved the problem of sensor nonlinearity from the material level. Thus, the PANI:graphene and PDMS hybrid temperature sensor with extraordinary linearity and high sensitivity is realized by establishing the space-gap model and mathematical theoretical analysis. The prepared sensor exhibits high sensitivity (1.60%/°C), linearity (R2 = 0.99), accuracy (0.3 °C), and time response (0.7 s) in the temperature sensing range of 25-40 °C. Based on this, the fabricated temperature sensor can combine with the read-out circuit and filter circuit with a high-precision analog digital converter (ADC) to monitor real-time skin temperature, ambient temperature, and respiratory rate, et al. This high-performance temperature sensor reveals its great potential in electronic skin, disease diagnosis, medical monitoring, and other fields.

Local anesthesia in oral and maxillofacial surgery: A review of current opinion.

Local anesthesia (LA) is the most important pain management process in oral and maxillofacial surgery. Safe and effective LA not only enable patients to obtain high-quality treatment, but also relieve the anxiety of patients when they come to the clinic. The choices of local anesthetic and injection methods determine the success of LA to a great extent. At present, in most countries or regions, common local anesthetics used in oral and maxillofacial surgery belong to amides and they are injected into patients' body mainly through block or infiltration anesthesia. In addition, the operators' technique level, patient's subjective psychology and anatomical variation of maxillofacial structure also have a strong influence on LA in dental clinic. Due to the existence of above factors, the worldwide success rates of LA in oral and maxillofacial surgery is very different. There are no specific LA methods that ensure 100% successful LA rates. Fortunately, the development of new local anesthetic and injection technology are providing us with new ideas to solve this problem. This review mainly report the new research progress on LA in oral and maxillofacial surgery in recent decades and help clinicians with dental LA operation.

Neurotrophic effects of dental pulp stem cells in repair of peripheral nerve after crush injury.

BACKGROUND: Nerve diseases and injuries, which are usually accompanied by motor or sensory dysfunction and disorder, impose a heavy burden upon patients and greatly reduce their quality of life. Dental pulp stem cells (DPSCs), derived from the neural crest, have many characteristics that are similar to those of neural cells, indicating that they can be an ideal source for neural repair. AIM: To explore the potential roles and molecular mechanisms of DPSCs in crushed nerve recovery. METHODS: DPSCs were isolated, cultured, and identified by multilineage differentiation and flow cytometry. Western blot and immunofluorescent staining were applied to analyze the expression levels of neurotrophic proteins in DPSCs after neural induction. Then, we collected the secretions of DPSCs. We analyzed their effects on RSC96 cell proliferation and migration by CCK8 and transwell assays. Finally, we generated a sciatic nerve crush injury model in vivo and used the sciatic function index, walking track analysis, muscle weight, and hematoxylin & eosin (H&E) staining to further evaluate the nerve repair ability of DPSCs. RESULTS: DPSCs highly expressed several specific neural markers, including GFAP, S100, Nestin, P75, and NF200, and were inclined toward neural differentiation. Furthermore, neural-induced DPSCs (N-DPSCs) could express neurotrophic factors, including NGF, BDNF, and GDNF. The secretions of N-DPSCs could enhance the proliferation and migration of Schwann cells. In vivo, both DPSC and N-DPSC implants alleviated gastrocnemius muscle atrophy. However, in terms of anatomy and motor function, as shown by H&E staining, immunofluorescent staining, and walking track analyses, the repair effects of N-DPSCs were more sustained, potent, and effective than those of DPSCs and the controls. CONCLUSION: In summary, this study demonstrated that DPSCs are inclined to differentiate into neural cells. N-DPSCs express neurotrophic proteins that could enhance the proliferation and migration of SCs. Furthermore, our results suggested that N-DPSCs could help crushed nerves with functional recovery and anatomical repair in vivo. Thus, DPSCs or N-DPSCs could be a promising therapeutic cell source for peripheral nerve repair and regeneration.

A Porous Au@Rh Bimetallic Core-Shell Nanostructure as an H2 O2 -Driven Oxygenerator to Alleviate Tumor Hypoxia for Simultaneous Bimodal Imaging and Enhanced Photodynamic Therapy.

In treatment of hypoxic tumors, oxygen-dependent photodynamic therapy (PDT) is considerably limited. Herein, a new bimetallic and biphasic Rh-based core-shell nanosystem (Au@Rh-ICG-CM) is developed to address tumor hypoxia while achieving high PDT efficacy. Such porous Au@Rh core-shell nanostructures are expected to exhibit catalase-like activity to efficiently catalyze oxygen generation from endogenous hydrogen peroxide in tumors. Coating Au@Rh nanostructures with tumor cell membrane (CM) enables tumor targeting via homologous binding. As a result of the large pores of Rh shells and the trapping ability of CM, the photosensitizer indocyanine green (ICG) is successfully loaded and retained in the cavity of Au@Rh-CM. Au@Rh-ICG-CM shows good biocompatibility, high tumor accumulation, and superior fluorescence and photoacoustic imaging properties. Both in vitro and in vivo results demonstrate that Au@Rh-ICG-CM is able to effectively convert endogenous hydrogen peroxide into oxygen and then elevate the production of tumor-toxic singlet oxygen to significantly enhance PDT. As noted, the mild photothermal effect of Au@Rh-ICG-CM also improves PDT efficacy. By integrating the superiorities of hypoxia regulation function, tumor accumulation capacity, bimodal imaging, and moderate photothermal effect into a single nanosystem, Au@Rh-ICG-CM can readily serve as a promising nanoplatform for enhanced cancer PDT.

Degradable self-adhesive epidermal sensors prepared from conductive nanocomposite hydrogel.

Conductive hydrogel-based epidermal sensors are attracting significant interest due to their great potential in soft robotics, electronic skins, bioelectronics and personalized healthcare monitoring. However, the conventional conductive hydrogel-based epidermal sensors cannot be degraded, resulting in the significant problem of waste, which will gradually increase the burden on the environment. Herein, degradable adhesive epidermal sensors were assembled using conductive nanocomposite hydrogels, which were prepared via the conformal coating of cellulose nanofiber (CNF) networks and supramolecular interaction among CNF, polydopamine (PDA), Fe3+, and polyacrylamide (PAM). They exhibited superior mechanical properties, reliable degradability (30 days in water), and excellent self-adhesiveness. The obtained hydrogels could be assembled as self-adhesive, degradable epidermal sensors for real-time human motion monitoring. Air could be sucked into the hydrogels during their swelling process, thereby oxidizing the tris-catechol-Fe3+ complexes and releasing Fe3+. Finally, the polymer networks were degraded via a Fenton-like reaction dominated by S2O82- and Fe(ii/iii) with the help of the catechol groups of PDA. This work paves the way for the potential fabrication of degradable, and self-adhesive epidermal sensors for applications in human-machine interactions, implantable bioelectronics, and personalized healthcare monitoring.

Advances of tooth-derived stem cells in neural diseases treatments and nerve tissue regeneration.

Nerous system diseases, both central and peripheral, bring an incredible burden onto patients and enormously reduce their quality of life. Currently, there are still no effective treatments to repair nerve lesions that do not have side effects. Stem cell-based therapies, especially those using dental stem cells, bring new hope to neural diseases. Dental stem cells, derived from the neural crest, have many characteristics that are similar to neural cells, indicating that they can be an ideal source of cells for neural regeneration and repair. This review summarizes the neural traits of all the dental cell types, including DPSCs, PDLCs, DFCs, APSCs and their potential applications in nervous system diseases. We have summed up the advantages of dental stem cells in neural repair, such as their neurotrophic and neuroprotective traits, easy harvest and low rejective reaction rate, among others. Taken together, dental stem cells are an ideal cell source for neural tissue regeneration and repair.

In vivo engineered extracellular matrix scaffolds with instructive niches for oriented tissue regeneration.

Implanted scaffolds with inductive niches can facilitate the recruitment and differentiation of host cells, thereby enhancing endogenous tissue regeneration. Extracellular matrix (ECM) scaffolds derived from cultured cells or natural tissues exhibit superior biocompatibility and trigger favourable immune responses. However, the lack of hierarchical porous structure fails to provide cells with guidance cues for directional migration and spatial organization, and consequently limit the morpho-functional integration for oriented tissues. Here, we engineer ECM scaffolds with parallel microchannels (ECM-C) by subcutaneous implantation of sacrificial templates, followed by template removal and decellularization. The advantages of such ECM-C scaffolds are evidenced by close regulation of in vitro cell activities, and enhanced cell infiltration and vascularization upon in vivo implantation. We demonstrate the versatility and flexibility of these scaffolds by regenerating vascularized and innervated neo-muscle, vascularized neo-nerve and pulsatile neo-artery with functional integration. This strategy has potential to yield inducible biomaterials with applications across tissue engineering and regenerative medicine.

Self-defensive antibiotic-loaded layer-by-layer coatings: Imaging of localized bacterial acidification and pH-triggering of antibiotic release.

Self-defensive antibiotic-loaded coatings have shown promise in inhibiting growth of pathogenic bacteria adhering to biomaterial implants and devices, but direct proof that their antibacterial release is triggered by bacterially-induced acidification of the immediate environment under buffered conditions remained elusive. Here, we demonstrate that Staphylococcus aureus and Escherichia coli adhering to such coatings generate highly localized acidification, even in buffered conditions, to activate pH-triggered, self-defensive antibiotic release. To this end, we utilized chemically crosslinked layer-by-layer hydrogel coatings of poly(methacrylic acid) with a covalently attached pH-sensitive SNARF-1 fluorescent label for imaging, and unlabeled-antibiotic (gentamicin or polymyxin B) loaded coatings for antibacterial studies. Local acidification of the coatings induced by S. aureus and E. coli adhering to the coatings was demonstrated by confocal-laser-scanning-microscopy via wavelength-resolved imaging. pH-triggered antibiotic release under static, small volume conditions yielded high bacterial killing efficiencies for S. aureus and E. coli. Gentamicin-loaded films retained their antibacterial activity against S. aureus under fluid flow in buffered conditions. Antibacterial activity increased with the number of polymer layers in the films. Altogether, pH-triggered, self-defensive antibiotic-loaded coatings become activated by highly localized acidification in the immediate environment of an adhering bacterium, offering potential for clinical application with minimized side-effects. STATEMENT OF SIGNIFICANCE: Polymeric coatings were created that are able to uptake and selectively release antibiotics upon stimulus by adhering bacteria in order to understand the fundamental mechanisms behind pH-triggered antibiotic release as a potential way to prevent biomaterial-associated infections. Through fluorescent imaging studies, this work importantly shows that adhering bacteria produce highly localized pH changes even in buffer. Accordingly such coatings only demonstrate antibacterial activity by antibiotic release in the presence of adhering bacteria. This is clinically important, because ad libitum releasing antibiotic coatings usually show a burst release and have often lost their antibiotic content when bacteria adhere.

Polymer-ceramic spiral structured scaffolds for bone tissue engineering: effect of hydroxyapatite composition on human fetal osteoblasts.

For successful bone tissue engineering, a scaffold needs to be osteoconductive, porous, and biodegradable, thus able to support attachment and proliferation of bone cells and guide bone formation. Recently, hydroxyapatites (HA), a major inorganic component of natural bone, and biodegrade polymers have drawn much attention as bone scaffolds. The present study was designed to investigate whether the bone regenerative properties of nano-HA/polycaprolactone (PCL) spiral scaffolds are augmented in an HA dose dependent manner, thereby establishing a suitable composition as a bone formation material. Nano-HA/PCL spiral scaffolds were prepared with different weight ratios of HA and PCL, while porosity was introduced by a modified salt leaching technique. Human fetal osteoblasts (hFOBs) were cultured on the nano-HA/PCL spiral scaffolds up to 14 days. Cellular responses in terms of cell adhesion, viability, proliferation, differentiation, and the expression of bone-related genes were investigated. These scaffolds supported hFOBs adhesion, viability and proliferation. Cell proliferation trend was quite similar on polymer-ceramic and neat polymer spiral scaffolds on days 1, 7, and 14. However, the significantly increased amount of alkaline phosphatase (ALP) activity and mineralized matrix synthesis was evident on the nano-HA/PCL spiral scaffolds. The HA composition in the scaffolds showed a significant effect on ALP and mineralization. Bone phenotypic markers such as bone sialoprotein (BSP), osteonectin (ON), osteocalcin (OC), and type I collagen (Col-1) were semi-quantitatively estimated by reverse transcriptase polymerase chain reaction analysis. All of these results suggested the osteoconductive characteristics of HA/PCL nanocomposite and cell maturation were HA dose dependent. For instance, HA∶PCL = 1∶4 group showed significantly higher ALP mineralization and elevated levels of BSP, ON, OC and Col-I expression as compared other lower or higher ceramic ratios. Amongst the different nano-HA/PCL spiral scaffolds, the 1∶4 weight ratio of HA and PCL is shown to be the most optimal composition for bone tissue regeneration.