Single-cell RNA-seq analysis decodes the kidney microenvironment induced by polystyrene microplastics in mice receiving a high-fat diet.

In recent years, the environmental health issue of microplastics has aroused an increasingly significant concern. Some studies suggested that exposure to polystyrene microplastics (PS-MPs) may lead to renal inflammation and oxidative stress in animals. However, little is known about the essential effects of PS-MPs with high-fat diet (HFD) on renal development and microenvironment. In this study, we provided the single-cell transcriptomic landscape of the kidney microenvironment induced by PS-MPs and HFD in mouse models by unbiased single-cell RNA sequencing (scRNA-seq). The kidney injury cell atlases in mice were evaluated after continued PS-MPs exposure, or HFD treated for 35 days. Results showed that PS-MPs plus HFD treatment aggravated the kidney injury and profibrotic microenvironment, reshaping mouse kidney cellular components. First, we found that PS-MPs plus HFD treatment acted on extracellular matrix organization of renal epithelial cells, specifically the proximal and distal convoluted tubule cells, to inhibit renal development and induce ROS-driven carcinogenesis. Second, PS-MPs plus HFD treatment induced activated PI3K-Akt, MAPK, and IL-17 signaling pathways in endothelial cells. Besides, PS-MPs plus HFD treatment markedly increased the proportions of CD8+ effector T cells and proliferating T cells. Notably, mononuclear phagocytes exhibited substantial remodeling and enriched in oxidative phosphorylation and chemical carcinogenesis pathways after PS-MPs plus HFD treatment, typified by alterations tissue-resident M2-like PF4+ macrophages. Multispectral immunofluorescence and immunohistochemistry identified PF4+ macrophages in clear cell renal cell carcinoma (ccRCC) and adjacent normal tissues, indicating that activate PF4+ macrophages might regulate the profibrotic and pro-tumorigenic microenvironment after renal injury. In conclusion, this study first systematically revealed molecular variation of renal cells and immune cells in mice kidney microenvironment induced by PS-MPs and HFD with the scRNA-seq approach, which provided a molecular basis for decoding the effects of PS-MPs on genitourinary injury and understanding their potential profibrotic and carcinogenesis in mammals.

Antibacterial activity and action target of phenyllactic acid against Staphylococcus aureus and its application in skim milk and cheese.

Phenyllactic acid (PLA) has been demonstrated to possess antibacterial activity and capacity to prolong food shelf life. However, studies on the performance of PLA in inhibiting Staphylococcus aureus and its effectiveness when applied to dairy products are largely lacking. Here, antibacterial activity (planktonic and biofilm states) of PLA against S. aureus CICC10145 (S. aureus_45) were investigated. The results showed that PLA inhibited growth of S. aureus_45 and formation of S. aureus_45 biofilm. Next, the antibacterial action target of PLA was uncovered from both physiological and phenotypic perspectives. The results showed that PLA decreased cell metabolic activity and cell viability, damaged cell membrane integrity, triggered leakage of intracellular contents (DNA, proteins, and ATP), and caused oxidative stress damage and morphological deformation of S. aureus_45. In practical application, the antibacterial activity of PLA against S. aureus_45 cells was further confirmed in skim milk and cheese as dairy food models, and the antibacterial effects can be adequately maintained during storage for 21 d, at least at 4°C. These findings suggested that PLA could be a potential candidate for controlling S. aureus outgrowth in dairy foods.

Supramolecular peptide nano-assemblies for cancer diagnosis and therapy: from molecular design to material synthesis and function-specific applications.

Peptide molecule has high bioactivity, good biocompatibility, and excellent biodegradability. In addition, it has adjustable amino acid structure and sequence, which can be flexible designed and tailored to form supramolecular nano-assemblies with specific biomimicking, recognition, and targeting properties via molecular self-assembly. These unique properties of peptide nano-assemblies made it possible for utilizing them for biomedical and tissue engineering applications. In this review, we summarize recent progress on the motif design, self-assembly synthesis, and functional tailoring of peptide nano-assemblies for both cancer diagnosis and therapy. For this aim, firstly we demonstrate the methodologies on the synthesis of various functional pure and hybrid peptide nano-assemblies, by which the structural and functional tailoring of peptide nano-assemblies are introduced and discussed in detail. Secondly, we present the applications of peptide nano-assemblies for cancer diagnosis applications, including optical and magnetic imaging as well as biosensing of cancer cells. Thirdly, the design of peptide nano-assemblies for enzyme-mediated killing, chemo-therapy, photothermal therapy, and multi-therapy of cancer cells are introduced. Finally, the challenges and perspectives in this promising topic are discussed. This work will be useful for readers to understand the methodologies on peptide design and functional tailoring for highly effective, specific, and targeted diagnosis and therapy of cancers, and at the same time it will promote the development of cancer diagnosis and therapy by linking those knowledges in biological science, nanotechnology, biomedicine, tissue engineering, and analytical science.

Efficient Polymer Pendant Approach toward High Stable Organic Fluorophore for Sensing Ultratrace Hg2+ with Improved Biological Compatibility and Cell Permeability.

A convenient and efficient method to eliminate the aggregation effect of organic photoelectric sensing materials and to improve biological compatibility and cell permeability as well was developed by hanging organic fluorophores on a polymer chain, for example, fluorescein fluorophores had been controllably hung on polyacrylamide main chains with a 1:2 stoichiometric ratio by a simple copolymerization strategy. The results showed that introduction of water-soluble bioactive polyacrylamide main chains into fluorescein fluorophores via covalent bonds could effectively improve their optical stability by deteriorating π-π stack and charge-transfer interactions among different fluorophores. More importantly, the resultant materials possessed low toxicity and excellent cell permeability ten times larger than their precursor fluorescein fluorophore, which made it express an especially turn-on fluorescent response to ultratrace Hg2+ both in aqueous and living cells by forming stable 5-member-ring complexes with Hg2+ with a correlation coefficient of 0.997 and a low detection limit of 4.0 × 10-10 mol·L-1. This work provides promising insight into constructing some practical sensing materials for environmentally-friendly biological analyses.

Treatment of Lung Cancer by Peptide-Modified Liposomal Irinotecan Endowed with Tumor Penetration and NF-κB Inhibitory Activities.

Current chemotherapy for lung cancer achieved limited efficacy due to poor tumor targeting and tissue penetration. Another obstacle in the therapy is activated nuclear factor-κB (NF-κB) in tumor cells, which plays a crucial role in promotion of antiapoptosis and drug resistance. In this study, we utilized a multifunctional liposome loaded with irinotecan and surface modified with a cell-permeable NF-κB inhibitor (CB5005), for treatment of non-small-cell lung carcinoma. CB5005 downregulated the level of NF-κB-related protein in the nuclei of A549 cells, and increased cellular uptake of the modified liposomes. In vivo antitumor activity in mice bearing A549 xenografts revealed that modification with CB5005 significantly improved the tumor inhibition rate of irinotecan. Immunohistochemical assays showed that the tumors treated with CB5005-modified liposomes possessed the most apoptotic cells and the lowest level of p50 in the cell nuclei. These results strongly suggest that antitumor efficacy of the irinotecan liposomes can be enhanced by tumor-penetrating and NF-κB-inhibiting functions of CB5005. Consequently, CB5005-modified liposomes provide a possible synergistic therapy for lung cancer, and would also be appropriate for other types of tumors associated with elevated NF-κB activity.

The design and biomedical applications of self-assembled two-dimensional organic biomaterials.

The design and applications of some inorganic two-dimensional (2D) nanomaterials such as graphene, graphyne, and borophene have been widely studied in recent years. Meanwhile, it has been noticed that self-assembling two-dimensional organic biomaterials (2DOBMs) including films, membranes, nanosheets, nanoribbons, grids, arrays, and lattices based on various biomolecules also exhibited promising structures, functions, and applications. The in-depth studies on the self-assembly formation, structural and functional tailoring of 2DOBMs open new avenues for the next generation of novel nanomaterials with adjustable structure and functions, which would further promote the applications of 2DOBMs in materials science, nanodevices, energy and environmental science, biomedicine, tissue engineering, and analytical science. In this review, we summarize important information on the basic principles to fabricate self-assembling 2DOBMs based on peptides, proteins, DNA, RNA, viruses, and other biopolymers. The potential strategies and techniques for tailoring and controlling the structures and functions of 2DOBMs are presented and discussed further. The function-specific biomedical applications of 2DOBMs in biosensors, biomimetic mineralization, cell growth, drug/gene delivery, and bioimaging are also highlighted.

Spray-Assisted Coil-Globule Transition for Scalable Preparation of Water-Resistant CsPbBr3 @PMMA Perovskite Nanospheres with Application in Live Cell Imaging.

Despite their impressive optical properties, lead halide perovskite quantum dots (PQDs) have not realized their potential, especially in bioimaging applications, as they suffer from poor moisture and thermal stability, solvent incompatibility, and significant toxicity. Here, a spray-assisted coil-globule transition method for encapsulating CsPbBr3 (CPB) PQDs into poly(methyl methacrylate) (PMMA) polymer nanospheres is reported. Polyvinylpyrrolidone-capped CPB PQDs are synthesized via the ligand assisted reprecipitation method in dichloromethane. After dissolving PMMA, the above precursor solution is sprayed into petroleum ether under high pressure N2 . High-pressure nebulization restricts the interactions between PMMA polymer chains, resulting in the formation of ≈112 nm nanoscale composite spheres after a coil-globule transition. The CPB@PMMA nanospheres not only possess 73% quantum yields but retain 81% of fluorescence intensity after the exposure to water for over 80 days. Due to their confined size and biocompatible encapsulation, they are readily available for cellular uptake and exhibit no toxicity on live HeLa cells. Furthermore, the PMMA surface allows for functional surface modification, carrying the possibility of targeting specific biological species and processes.

Noninvasive delivery of oligonucleotide by penetratin-modified polyplexes to inhibit protein expression of intraocular tumor.

Our present study aimed to develop an antisense oligonucleotide (ASO) delivery system to achieve gene silencing in intraocular tumor via topical instillation. ASO specific for luciferase was chosen as model drug, polyamidoamine (PG5) was employed to condense ASO, and penetratin (Pene) was used to enhance cellular uptake. Nanoscale PG5/ASO/Pene polyplex was stabilized via noncovalent bonding. In vitro evaluations indicated that PG5/ASO/Pene exhibited improved cell-penetrating and gene silencing ability compared with naked ASO and PG5/ASO. Subcutaneous and orthotopic tumor models expressing luciferase were established in nude mice. After treated by PG5/ASO/Pene, immunohistochemical results of subcutaneous tumors showed significant inhibition of luciferase expression via peritumoral injection, and bioluminescence from orthotopic tumor was obviously weakened via topical instillation. To date, few works were successful in noninvasive treatment of intraocular diseases using antisense strategy, this penetratin-modified polyplex could be a promising vector to inhibit protein expression by effectively delivering ASOs into the eye.

Fabrication of Isoniazid/Rifampicin/Poly L-lactic Acid Donut-shaped Implants via Three Dimensional Printing Technique.

Objective To investigate the possibility of manufacturing dual-drug loaded isoniazid/rifampicin/poly L-lactic acid (PLLA) implant with donut-shaped structure via three-dimensional (3D) printing technique and study the drug release characteristic and biocompatibility of the implant in vitro.Methods PLLA was crushed into particles with diameters around 75-100 µm.Isoniazid and rifampicin bulk drugs were dissolved into the organic dissolvent respectively to be the binding liquid.The 3D printing machine fabricated the donut-shaped implant via binding the PLLA powder layer by layer.Dynamic socking method was used to study the in vitro release characteristics,and cell culture experiment was used to test the cytocompatibility of the implant.Results PLLA slow-release implants were made by using the PLLA powder as matrix and isoniazid/rifampicin organic solvent as binding liquid through 3D printing.The drugs in the implants distributed in nest under electron microscope.The concentrations of both drugs were still higher than the lowest effective bacteriostasis concentration after release for 32 days.Cytotoxicity and direct contact tests indicated that the implants had rare cytotoxicity and favorable biocompatibility. Conclusion The donut-shaped implants can be successfully fabricated using the 3D printing method,which offers a new method for the manufacturing of topical slow-release anti-tuberculosis drugs.

[Modification by wheat germ agglutinin delays the ocular elimination of liposome].

The purpose of this study is to explore the feasibility of wheat germ agglutinin (WGA) modified liposome as a vehicle for ophthalmic administration. Liposome loaded with 5-carboxyfluorescein (FAM) was prepared by lipid film hydration method. WGA was thiolated and then conjugated to the surface of the liposome via polyethylene glycol linker to constitute the WGA-modified and FAM-loaded liposome (WGA-LS/FAM). The amount of thiol groups on each WGA molecule was determined, and the bioactivity of WGA was estimated after it was modified to the surface of liposome. The physical and chemical features of the WGA-modified liposome were characterized and the ocular bioadhesive performance was evaluated in rats. The result showed that each thiolated WGA molecule was conjugated with 1.32 thiol groups. WGA-LS/FAM had a mean size of (97.40 +/- 1.39) nm, with a polydispersity index of 0.23 +/- 0.01. The entrapment efficacy of FAM was about (2.95 +/- 0.21)%, and only 4% of FAM leaked out of the liposome in 24 h. Erythrocyte agglutination test indicated that after modification WGA preserved the binding activity to glycoprotein. The in vivo ocular elimination of WGA-LS/FAM fitted first-order kinetics, and the elimination rate was significantly slower than that of the unmodified liposome, demonstrating WGA-modified liposome is bioadhesive and suitable for ophthalmic administration.

Combination of PEGylation and Cationization on Phospholipid-Coated Cyclosporine Nanosuspensions for Enhanced Ocular Drug Delivery.

Strong precorneal clearance mechanisms including reflex blink, constant tear drainage, and rapid mucus turnover constitute great challenges for eye drops for effective drug delivery to the ocular epithelium. In this study, cyclosporine A (CsA) for the treatment of dry eye disease (DED) was selected as the model drug. Two strategies, PEGylation for mucus penetration and cationization for potent cellular uptake, were combined to construct a novel CsA nanosuspension (NS@lipid-PEG/CKC) by coating nanoscale drug particles with a mixture of lipids, DSPE-PEG2000, and a cationic surfactant, cetalkonium chloride (CKC). NS@lipid-PEG/CKC with the mean size ∼173 nm and positive zeta potential ∼+40 mV showed promoted mucus penetration, good cytocompatibility, more cellular uptake, and prolonged precorneal retention without obvious ocular irritation. More importantly, NS@lipid-PEG/CKC recovered tear production and goblet cell density more efficiently than the commercial cationic nanoemulsion on a dry eye disease rat model. All results indicated that a combination of PEGylation and cationization might provide a promising strategy to coordinate mucus penetration and cellular uptake for enhanced drug delivery to the ocular epithelium for nanomedicine-based eye drops.

Single-cell transcriptome analysis of liver immune microenvironment changes induced by microplastics in mice with non-alcoholic fatty liver.

Recent studies have discovered that tiny particles of microplastics (MPs) at the nano-scale level can enter the body of organisms from the environment, potentially causing metabolic ailments. However, further investigation is required to understand the alterations in the immune microenvironment associated with non-alcoholic fatty liver disease (NAFLD) occurrence following exposure to MPs. Experiments were performed using mice, which were given a normal chow or high-fat diet (NCD or HFD, respectively) plus free drinking of sterile water with or without MPs, respectively. Employing an impartial technique known as unbiased single-cell RNA-sequencing (scRNA-seq), the cellular (single-cell) pathology landscape of NAFLD and related changes in the identified immune cell populations induced following MPs plus HFD treatment were assessed. The results showed that mice in the HFD groups had remarkably greater NAFLD activity scores than those from the NCD groups. Moreover, administration of MPs plus HFD further worsened the histopathological changes in the mice's liver, leading to hepatic steatosis, inflammatory cell infiltrations and ballooning degeneration. Following the construction of a sing-cell resolution transcriptomic atlas of 43,480 cells in the mice's livers of the indicated groups, clear cellular heterogeneity and potential cell-to-cell cross-talk could be observed. Specifically, we observed that MPs exacerbated the pro-inflammatory response and influenced the stemness of hepatocytes during HFD feeding. Importantly, treatment with MPs significantly increase the infiltration of the infiltrating liver-protecting Vsig4+ macrophages in the liver of the NAFLD mouse model while remarkably decreasing the angiogenic S100A6+ macrophage subpopulation. Furthermore, mice treated with MPs plus HFD exhibited significantly increased recruitment of CD4+ cells and heightened exhaustion of CD8+ T cells than those from the control group, characteristics typically associated with the dysregulation of immune homeostasis and severe inflammatory damage. Overall, this study offers valuable perspectives into comprehending the potential underlying cellular mechanisms and regulatory aspects of the microenvironment regarding MPs in the development of NAFLD.

D-peptide inhibitors of the p53-MDM2 interaction for targeted molecular therapy of malignant neoplasms.

The oncoproteins MDM2 and MDMX negatively regulate the activity and stability of the tumor suppressor protein p53, conferring tumor development and survival. Antagonists targeting the p53-binding domains of MDM2 and MDMX kill tumor cells both in vitro and in vivo by reactivating the p53 pathway, promising a class of antitumor agents for cancer therapy. Aided by native chemical ligation and mirror image phage display, we recently identified a D-peptide inhibitor of the p53-MDM2 interaction termed (D)PMI-alpha (TNWYANLEKLLR) that competes with p53 for MDM2 binding at an affinity of 219 nM. Increased selection stringency resulted in a distinct D-peptide inhibitor termed (D)PMI-gamma (DWWPLAFEALLR) that binds MDM2 at an affinity of 53 nM. Structural studies coupled with mutational analysis verified the mode of action of these D-peptides as MDM2-dependent p53 activators. Despite being resistant to proteolysis, both (D)PMI-alpha and (D)PMI-gamma failed to actively traverse the cell membrane and, when conjugated to a cationic cell-penetrating peptide, were indiscriminately cytotoxic independently of p53 status. When encapsulated in liposomes decorated with an integrin-targeting cyclic-RGD peptide, however, (D)PMI-alpha exerted potent p53-dependent growth inhibitory activity against human glioblastoma in cell cultures and nude mouse xenograft models. Our findings validate D-peptide antagonists of MDM2 as a class of p53 activators for targeted molecular therapy of malignant neoplasms harboring WT p53 and elevated levels of MDM2.

Recent advance in biomass membranes: Fabrication, functional regulation, and antimicrobial applications.

Both inorganic and polymeric membranes have been widely applied for antimicrobial applications. However, these membranes exhibit low biocompatibility, weak biodegradability, and potential toxicity to human being and environment. Biomass materials serve as excellent candidates for fabricating functional membranes to address these problems due to their unique physical, chemical, and biological properties. Here we present recent progress in the fabrication, functional regulation, and antimicrobial applications of various biomass-based membranes. We first introduce the types of biomass membranes and their fabrication methods, including the phase inversion, vacuum filtration, electrospinning, layer-by-layer self-assembly, and coating. Then, the strategies on functional regulation of biomass membranes by adding 0D, 1D, and 2D nanomaterials are presented and analyzed. In addition, antibacterial, antifungal, and antiviral applications of biomass-based functional membranes are summarized. Finally, potential development aspects of biomass membranes are discussed and prospected. This comprehensive review is valuable for guiding the design, synthesis, structural/functional tailoring, and sustainable utilization of biomass membranes.

[Poly(arginine)8 enhanced intestinal absorption of insulin-loaded nanoparticles].

The purpose of this study is to investigate the feasibility of poly(arginine)8 (R8) modified poly(lactic-co-glycolic acid) (PLGA) nanoparticles as a carrier for the oral delivery of insulin. Insulin-loaded PLGA nanoparticle (INS-NP) was prepared by a double emulsion-solvent evaporation method, and R8 was subsequently conjugated to the surface of the INS-NP via polyethylene glycol bridge (R8-INS-NP). The physical and chemical features of the nanoparticles were characterized, and insulin release was determined in vitro. The pharmacokinetics and pharmacodynamics were evaluated by in situ absorption study with the intestinal loop of rats. The blood glucose level was determined by glucose oxidize method and the serum insulin concentration was determined by radioimmunoassay (RIA). The mean diameter of INS-NP was (179.0 +/- 5.2) nm and the polydispersity index was 0.152 +/- 0.042, while the entrapment efficiency was (29.10 +/- 2.59) %. The in vitro release behavior of insulin showed an initial burst effect followed by a stage of slow release. After administrating 10 U x kg(-1) insulin to rats, R8-INS-NPs decreased the plasma glucose level much lower than INS-NPs, meanwhile, D-form R8 substantially enhanced intestinal absorption of insulin much more than L-form R8. Compared to subcutaneous injection, the relative bioavailabilities of insulin were 0.52%, 4.78%, 8.39%, and the pharmacological bioavailabilities were 2.07%, 3.90%, 8.24%, separately. The R8-modified nanoparticles promoted the intestinal absorption of insulin, which might be a potential approach for oral delivery of peptide, protein and even other hydrophilic macromolecules in the future.

Recent advances in the hybridization of cellulose and carbon nanomaterials: Interactions, structural design, functional tailoring, and applications.

Due to the good biocompatibility and flexibility of cellulose and the excellent optical, electronic, as well as mechanical properties of carbon nanomaterials (CNMs), cellulose/CNM hybrid materials have been widely synthesized and used in energy storage, sensors, adsorption, biomedicine, and many other fields. In this review, we present recent advances (2016-current) in the design, structural design, functional tailoring and various applications of cellulose/CNM hybrid materials. For this aim, first the interactions between cellulose and CNMs for promoting the formation of cellulose/CNM materials are analyzed, and then the hybridization between cellulose with various CNMs for tailoring the structures and functions of hybrid materials is introduced. Further, abundant applications of cellulose/CNM hybrid materials in various fields are presented and discussed. This comprehensive review will be helpful for readers to understand the functional design and facile synthesis of cellulose-based nanocomposites, and to promote the high-performance utilization and sustainability of biomass materials in the future.

Design and development of novel fluorescence sensing material for exosome recognition.

Exosomes are extracellular vesicles with relatively specific expression of CD63 transmembrane protein. In this study, We designed and constructed a multisite-targeting polymer which has both fluorescence and targeting recognition. It can bond to the hydrophilic group of CD63 by connecting with hydrogen. The chemical structure and the ability to combine with CD63 of fluorescent monomer and polymer were characterized and confirmed by FTIR and 1H NMR. MTT assay was performed to detect the cytotoxicity and biocompatibility of this polymer. Then we found the cell viability was 80.64% and the hemolysis rate of erythrocyte was only 0.101% even at F concentration of 20 µM. In vitro, the proposed polymer showed better ability to enter cells after linking exosomes via CD63; in vivo, it showed the ability to bind stably to exosomes and target tumor implants.

Core-shell lipoplexes inducing active macropinocytosis promote intranasal delivery of c-Myc siRNA for treatment of glioblastoma.

Glioblastoma is the most common and aggressive primary brain tumor, whose malignancy is closely correlated with elevated proto-oncogene c-myc. Intranasal administration emerges as a potential approach to deliver gene into the brain and interfere c-Myc expression. However, powerful permeability in nasal mucosa, selective delivery to glioma and avoidance of premature release during remote transport are imperative to ensure the therapeutic effectiveness. To address the above concerns, herein we constructed a lipoplex based on pre-compression of c-Myc-targeting siRNA (sic-Myc) by octaarginine and subsequent encapsulation by liposome modified with a selected peptide derived from penetratin, named 89WP. It was found that the lipoplex exhibited a stable core-shell structure and could be preferentially internalized along with cell debris by glioma cells via active macropinocytosis. Through this cellular uptake pathway, the lipoplex avoided being entrapped by lysosome and released siRNA in cytoplasm within 4 h, inducing substantial downregulation of c-Myc mRNA and protein expression of glioma cells. Furthermore, due to significantly enhanced permeability in tumor spheroids and nasal mucosa, the lipoplex was competent to deliver more siRNA to orthotopic glioma after intranasal administration, and therefore prolonged the survival time of glioma-bearing mice by inducing apoptosis. STATEMENT OF SIGNIFICANCE: In the present work, a lipoplex was designed to address the unmet demands on intranasal siRNA delivery to the brain for treatment of glioma. First, a powerful peptide was selected to enable the lipoplex to penetrate nasal mucosa. Second, we found the lipoplex could be selectively internalized along with cell debris by glioma cells via active macropinocytosis, and recorded the entire process. This cellular uptake pathway not only prevented the lipoplex being entrapped by lysosome, but also increased distribution of the lipoplex in orthotopic glioma. Third, this lipoplex provided additional protection for siRNA to avoid premature release during transport from nasal to brain. Overall, this lipoplex improved the gene delivery efficiency of intranasal administration and was promising in the perspective of selectively silencing disease-related genes in intracranial tumor.

A highly sensitive detection for foot-and-mouth disease virus by gold nanopariticle improved immuno-PCR.

BACKGROUND: Foot-and-mouth disease (FMD) is one of the most contagious of all artiodactyl animal diseases, and its infection has an obvious ability to spread over long distances and to contribute to epidemics in FMD-free areas. A highly sensitive and specific method is required to detect FMDV. In this study, we evaluated the usefulness of a bio-barcode assay (BCA) technique for detecting clinical samples of FMDV. METHODS: Highly sensitive gold nanopariticle (GNP) improved immuno -PCR (GNP-IPCR) which derived from the bio-barcode assay (BCA) was designed for the detection of FMDV. The target viral particles were captured by a polyclonal antibody coated on ELISA microplate, followed by adding GNP which was dually modified with oligonucleotides and a FMDV specific monoclonal antibody (MAb) 1D11 to form a sandwiched immune complex. After the formation of immuno-complex, the signal DNA was released by heating, and consequently characterized by PCR and real time PCR. RESULTS: The detection limit of GNP-PCR could reach to 10 fg/ml purified FMDV particles, and the assay can detect clinical samples of FMDV with highly sensitivity, while detect limit of conventional ELISA is 100 ng/ml in this study. CONCLUSION: GNP-IPCR may provide a highly sensitive method for the detection of FMDV.

Enhanced mucosal penetration and efficient inhibition efficacy against cervical cancer of PEGylated docetaxel nanocrystals by TAT modification.

To investigate the potential of cell penetrating peptide (CPP) modification on nanomedicine for improving mucosal penetration and effective therapy of cervical cancer, docetaxel nanocrystals modified with trans-activator of transcription (TAT) peptide were designed for treatment of cervical cancer via vaginal administration. Docetaxel nanocrystals were coated by polymerization of dopamine to form polydopamine (PDA) coating which facilitated TAT modification and PEGylation for less mucus entrapment to get PEGylated nanocrystals modified with TAT (NC@PDA-PEG-TAT). Enhanced cellular drug uptake and cytotoxicity of NC@PDA-PEG-TAT was observed in cervical cancer-related TC-1 cells than that of PEGylated nanocrystals (NC@PDA-PEG). Intravaginally administered NC@PDA-PEG-TAT dispersed in poloxamer 407-based thermosensitive gel exhibited prolonged in vivo intravaginal retention, deeper mucosal penetration and more potent inhibition on the growth of murine orthotopic cervical cancer than NC@PDA-PEG, PDA-coated nanocrystals or unmodified nanocrystals. All data suggested the significance of CPP-modification on nanocrystals in the local treatment of vaginal mucosa-related diseases by vaginal administration.