Boron Neutron Capture Therapy Enhanced by Boronate Ester Polymer Micelles: Synthesis, Stability, and Tumor Inhibition Studies.

Boron neutron capture therapy (BNCT) targets invasive, radioresistant cancers but requires a selective and high B-10 loading boron drug. This manuscript investigates boron-rich poly(ethylene glycol)-block-(poly(4-vinylphenyl boronate ester)) polymer micelles synthesized via atom transfer radical polymerization for their potential application in BNCT. Transmission electron microscopy (TEM) revealed spherical micelles with a uniform size of 43 ± 10 nm, ideal for drug delivery. Additionally, probe sonication proved effective in maintaining the micelles' size and morphology postlyophilization and reconstitution. In vitro studies with B16-F10 melanoma cells demonstrated a 38-fold increase in boron accumulation compared to the borophenylalanine drug for BNCT. In vivo studies in a B16-F10 tumor-bearing mouse model confirmed enhanced tumor selectivity and accumulation, with a tumor-to-blood (T/B) ratio of 2.5, surpassing BPA's T/B ratio of 1.8. As a result, mice treated with these micelles experienced a significant delay in tumor growth, highlighting their potential for BNCT and warranting further research.

Effects of Sjogren's syndrome and high sugar diet on oral microbiome in patients with rampant caries: a clinical study.

OBJECTIVE: The purpose of this study was to assess the composition of the oral microbial flora of adults with rampant caries in China to provide guidance for treatment. PATIENTS AND METHODS: Sixty human salivary and supragingival plaque samples were collected. They were characterized into four groups: patients with rampant caries with Sjogren's syndrome (RC-SS) or high-sugar diet (RC-HD), common dental caries (DC), and healthy individuals (HP). The 16S rRNA V3-V4 region of the bacterial DNA was detected by Illumina sequencing. PCoA based on OTU with Bray-Curtis algorithm, the abundance of each level, LEfSe analysis, network analysis, and PICRUSt analysis were carried out between the four groups and two sample types. Clinical and demographic data were compared using analysis of variance (ANOVA) or the nonparametric Kruskal-Wallis rank-sum test, depending on the normality of the data, using GraphPad Prism 8 (P < 0.05). RESULTS: OTU principal component analysis revealed a significant difference between healthy individuals and those with RC-SS. In the saliva of patients with rampant caries, the relative abundance of Firmicutes increased significantly at the phylum level. Further, Streptocpccus, Veillonella, Prevotella, and Dialister increased, while Neisseria and Haemophilus decreased at the genus level. Veillonella increased in the plaque samples of patients with rampant caries. CONCLUSION: Both salivary and dental plaque composition were significantly different between healthy individuals and patients with rampant caries. This study provides a microbiological basis for exploring the etiology of rampant caries. CLINICAL RELEVANCE: This study provides basic information on the flora of the oral cavity in adults with rampant caries in China. These findings could serve as a reference for the treatment of this disease.

Accuracy of Orbital Shape Reconstruction-Comparative Analysis of Errors in Implant Shape Versus Implant Positioning: A Cadaveric Study.

INTRODUCTION: Orbital blowout fractures are commonly reconstructed with implants shaped to repair orbital cavity defects, restore ocular position and projection, and correct diplopia. Orbital implant shaping has traditionally been performed manually by surgeons, with more recent use of computer-assisted design (CAD). Accuracy of implant placement is also key to reconstruction. This study compares the placement accuracy of orbital implants, testing the hypothesis that CAD-shaped implants indexed to patient anatomy will better restore orbit geometry compared with manually shaped implants and manually placed implants. METHODS: The placement accuracy of orbital implants was assessed within a cadaveric blowout fracture model (3 skulls, 6 orbits) via 3-dimensional CT analysis. Defects were repaired with 4 different techniques: manually placed-manually shaped composite (titanium-reinforced porous polyethylene), manually placed CAD composite, indexed placed CAD composite, and indexed placed CAD titanium mesh. RESULTS: Implant placement accuracy differed significantly with the implant preparation method ( P =0.01). Indexing significantly improved the placement accuracy ( P =0.002). Indexed placed titanium mesh CAD implants (1.42±0.33 mm) were positioned significantly closer to the intact surface versus manually placed-manually shaped composite implants (2.12±0.39 mm). DISCUSSION: Computer-assisted design implants indexed to patient geometry yielded average errors below the acceptable threshold (2 mm) for enophthalmos and diplopia. This study highlights the importance of adequately indexing CAD-designed implants to patient geometry to ensure accurate orbital reconstructions.

Hemocompatibility Multi-in-One Hydrogel Coating with ROS-Triggered Inflammation Suppression and Anti-Infection Properties for Blood-Contacting Device.

In traditional blood-contacting medical devices, infection and thrombosis are easily formed on the surface of the materials. In addition, inflammation is also a clinical complication that cannot be ignored. More importantly, there is a mutually promoting relationship between the inflammatory response and the infection as well as thrombosis. In this work, we propose a self-adaptive anti-inflammatory coating strategy combined with anti-infection and anticoagulant capacity, which was accomplished based on nano-Ag particles and dexamethasone (Dex)-loaded hydrogel coating. The coating loaded with nano-Ag endows it with good bactericidal performance, including Gram-positive and Gram-negative bacteria. As an anti-inflammatory drug, Dex was grafted onto hydrogel coating by a reactive oxygen species (ROS)-cleavable thioketal (TK) bond and released upon the trigger of an inflammatory environment, blocking further inflammatory cascade, providing self-adaptive anti-inflammatory properties, and avoiding side effects of the drug. It was demonstrated that the coating worked as a precise strategy to resist coagulation, infection, and inflammation, provided a new perspective for designing clinical complication-conformable coatings, and had great application prospects on blood-contacting medical devices.

Injectable stress relaxation gelatin-based hydrogels with positive surface charge for adsorption of aggrecan and facile cartilage tissue regeneration.

BACKGROUND: Cartilage injury and pathological degeneration are reported in millions of patients globally. Cartilages such as articular hyaline cartilage are characterized by poor self-regeneration ability due to lack of vascular tissue. Current treatment methods adopt foreign cartilage analogue implants or microfracture surgery to accelerate tissue repair and regeneration. These methods are invasive and are associated with the formation of fibrocartilage, which warrants further exploration of new cartilage repair materials. The present study aims to develop an injectable modified gelatin hydrogel. METHOD: The hydrogel effectively adsorbed proteoglycans secreted by chondrocytes adjacent to the cartilage tissue in situ, and rapidly formed suitable chondrocyte survival microenvironment modified by ε-poly-L-lysine (EPL). Besides, dynamic covalent bonds were introduced between glucose and phenylboronic acids (PBA). These bonds formed reversible covalent interactions between the cis-diol groups on polyols and the ionic boronate state of PBA. PBA-modified hydrogel induced significant stress relaxation, which improved chondrocyte viability and cartilage differentiation of stem cells. Further, we explored the ability of these hydrogels to promote chondrocyte viability and cartilage differentiation of stem cells through chemical and mechanical modifications. RESULTS: In vivo and in vitro results demonstrated that the hydrogels exhibited efficient biocompatibility. EPL and PBA modified GelMA hydrogel (Gel-EPL/B) showed stronger activity on chondrocytes compared to the GelMA control group. The Gel-EPL/B group induced the secretion of more extracellular matrix and improved the chondrogenic differentiation potential of stem cells. Finally, thus hydrogel promoted the tissue repair of cartilage defects. CONCLUSION: Modified hydrogel is effective in cartilage tissue repair.

Detection of Dental Apical Lesions Using CNNs on Periapical Radiograph.

Apical lesions, the general term for chronic infectious diseases, are very common dental diseases in modern life, and are caused by various factors. The current prevailing endodontic treatment makes use of X-ray photography taken from patients where the lesion area is marked manually, which is therefore time consuming. Additionally, for some images the significant details might not be recognizable due to the different shooting angles or doses. To make the diagnosis process shorter and efficient, repetitive tasks should be performed automatically to allow the dentists to focus more on the technical and medical diagnosis, such as treatment, tooth cleaning, or medical communication. To realize the automatic diagnosis, this article proposes and establishes a lesion area analysis model based on convolutional neural networks (CNN). For establishing a standardized database for clinical application, the Institutional Review Board (IRB) with application number 202002030B0 has been approved with the database established by dentists who provided the practical clinical data. In this study, the image data is preprocessed by a Gaussian high-pass filter. Then, an iterative thresholding is applied to slice the X-ray image into several individual tooth sample images. The collection of individual tooth images that comprises the image database are used as input into the CNN migration learning model for training. Seventy percent (70%) of the image database is used for training and validating the model while the remaining 30% is used for testing and estimating the accuracy of the model. The practical diagnosis accuracy of the proposed CNN model is 92.5%. The proposed model successfully facilitated the automatic diagnosis of the apical lesion.

Caries and Restoration Detection Using Bitewing Film Based on Transfer Learning with CNNs.

Caries is a dental disease caused by bacterial infection. If the cause of the caries is detected early, the treatment will be relatively easy, which in turn prevents caries from spreading. The current common procedure of dentists is to first perform radiographic examination on the patient and mark the lesions manually. However, the work of judging lesions and markings requires professional experience and is very time-consuming and repetitive. Taking advantage of the rapid development of artificial intelligence imaging research and technical methods will help dentists make accurate markings and improve medical treatments. It can also shorten the judgment time of professionals. In addition to the use of Gaussian high-pass filter and Otsu's threshold image enhancement technology, this research solves the problem that the original cutting technology cannot extract certain single teeth, and it proposes a caries and lesions area analysis model based on convolutional neural networks (CNN), which can identify caries and restorations from the bitewing images. Moreover, it provides dentists with more accurate objective judgment data to achieve the purpose of automatic diagnosis and treatment planning as a technology for assisting precision medicine. A standardized database established following a defined set of steps is also proposed in this study. There are three main steps to generate the image of a single tooth from a bitewing image, which can increase the accuracy of the analysis model. The steps include (1) preprocessing of the dental image to obtain a high-quality binarization, (2) a dental image cropping procedure to obtain individually separated tooth samples, and (3) a dental image masking step which masks the fine broken teeth from the sample and enhances the quality of the training. Among the current four common neural networks, namely, AlexNet, GoogleNet, Vgg19, and ResNet50, experimental results show that the proposed AlexNet model in this study for restoration and caries judgments has an accuracy as high as 95.56% and 90.30%, respectively. These are promising results that lead to the possibility of developing an automatic judgment method of bitewing film.

Dental Subphenotypes in Infants With Orofacial Clefts-A Longitudinal Population-Based Retrospective Radiographic Study of the Primary and Secondary Dentitions.

OBJECTIVES: To determine the developmental patterns of primary and secondary dentitions in infants with orofacial clefts. DESIGN: Retrospective, longitudinal, population-based cohort study. MATERIALS: Longitudinal records and radiographs of 192 nonsyndromic Northern European infants with isolated unilateral cleft lip (UCL, n = 111) and isolated cleft palate (CP, n = 81). METHODS: Radiographic assessments of primary and secondary dentition anomalies and dental maturation, by gender and cleft severity for comparisons between the groups and with historical controls. RESULTS: In infants with UCL, the frequencies of dental anomalies were high in both primary (38.7%) and secondary (18.0%) dentitions. Primary and secondary dentition anomalies were not observed in infants with CP and different in the UCL group (P = .003). Risk differences involved primary supernumerary teeth (P = .0001) and talon cusp formation (P = .0001), and secondary tooth agenesis (P = .001) of the maxillary lateral incisor on the side of the cleft lip. Delayed primary and secondary dental maturation occurred in the UCL and CP groups, greater in infants with UCL (P < .0001). Primary and secondary dental maturation featured sexual dimorphism with greater delay in males (UCL, P < .0001; CP, .0001 > P = .001). The effect of cleft severity on dental maturation was significant in infants with UCL (P = .0361) and CP (P = .0175) in the primary but not in the secondary dentition. CONCLUSIONS: There were different dental anomalies in the primary and secondary dentitions in operated infants with UCL and no dental anomalies in unoperated infants with CP. Dental maturation was delayed in infants with UCL and CP with greater delay in males compared to females.

Specific biotests to assess eco-toxicity of biodegradable polymer materials in soil.

Eco-toxicity investigation of polymer materials was considered extremely necessary for their potential menace, which was widely use as mulching materials in agricultural. In this study, polyethylene (PE), polystyrene (PS) and synthetic biomaterials-Ecoflex and cellulose were applying into soil cultivated with two potential indicator plants species: oat (Avena sativa) and red radish (Raphanus sativum). Variety of chemical, biochemical parameters and enzyme activity in soil were proved as effective approach to evaluate polymers phytotoxicity in plant-soil mesocosm. The F-value of biomass, pH, heavy metal and electoral conductivity of Raphanus behaved significant different from T0. Significant analysis results indicated biodegradation was fast in PE than PS, besides, heavy metals were dramatically decrease in the end implied the plant absorption may help decrease heavy metal toxicity. The increase value at T2 of Dehydrogenase activity (0.84 higher than average value for Avena & 0.91 higher for Raphanus), Metabolic Index (3.12 higher than average value for Avena & 3.81 higher for Raphanus) means during soil enzyme activity was promoted by biodegradation for its heterotrophic organisms' energy transportation was stimulated. Statistics analysis was carried on Biplot PC1 (24.2% of the total variance), PC2 (23.2% of the total variance), versus PC3 (22.8% of the total variance), which indicated phosphatase activity and metabolic index was significant correlated, and high correlation of ammonium and protease activity. Furthermore, the effects were more evident in Raphanus treatments than in Avena, suggesting the higher sensitivity of Raphanus to polymers treatment, which indicate biodegradation of polymers in Raphanus treatment has produced intermediate phytotoxic compounds.

Caries Status and Salivary Alterations of Type-1 Diabetes Mellitus in Children and Adolescents: A Systematic Review and Meta-analysis.

INTRODUCTION: The association between dental caries, salivary alterations, and type-1 diabetes mellitus (D1TM) remains inconclusive in children and adolescents. This systematic review evaluated the caries status and salivary alterations of children and adolescents suffering from D1TM. METHODS: Meta-analysis searched from 5 electronic databases was performed considering the decay-missing-filled teeth (DMFT), decay-missing-filled surfaces, and decay-missing-filled primary teeth (dmft) index for caries and the stimulated flow rate, unstimulated flow rate, and buffering capacity for salivary alterations. Quality assessments were performed using the Healthcare Research and Quality Agency. RESULTS: Eleven studies satisfied the eligibility criteria. The meta-analysis revealed that DMF(T) (0.61; 95% confidence interval [CI], 0.14-1.08, P = .01) and dmft (-0.43; 95% CI, -0.71 to -0.15, P = .002) were significantly higher in D1TM group than the non-D1TM group. Stimulated flow rate (-0.40; 95% CI, -0.57 to -0.23, P < .00001) was significantly lower in D1TM group than in the non-D1TM group. No significant differences in decay-missing-filled surfaces and the buffering capacity were observed between the D1TM and the non-D1TM groups. CONCLUSIONS: The level of DMF(T) and dmft was higher in children/adolescents with D1TM than that with non-D1TM, and the salivary flow could be considered decreased with D1TM. The strength of the evidence of the studies analyzed, however, was deemed to be moderate and low.

Improved Micellar Formulation for Enhanced Delivery for Paclitaxel.

We have previously improved the bioactivity of PEG5k-FTS2 system by incorporating disulfide bond (PEG5k-S-S-FTS2) to facilitate the release of farnesyl thiosalicylic acid (FTS).1 Later, fluorenylmethyloxycarbonyl (Fmoc) moiety has been introduced to PEG5k-FTS2 system (PEG5k-Fmoc-FTS2) in order to enhance drug loading capacity (DLC) and formulation stability.2 In this study, we have brought in both disulfide linkage and Fmoc group to PEG5k-FTS2 to form a simple PEG5k-Fmoc-S-S-FTS2 micellar system. PEG5k-Fmoc-S-S-FTS2 conjugate formed filamentous micelles with a ∼10-fold decrease in critical micellar concentration (CMC). Compared with PEG5k-Fmoc-FTS2, our novel system exhibited further strengthened DLC and colloidal stability. More FTS was freed from PEG5k-Fmoc-S-S-FTS2 in treated tumor cells compared to PEG5k-Fmoc-FTS2, which was correlated to an increased cytotoxicity of our new carrier in these cancer cells. After loading Paclitaxel (PTX) into PEG5k-Fmoc-S-S-FTS2 micelles, it showed more potent efficiency in inhibition of tumor cell proliferation than Taxol and PTX-loaded PEG5k-Fmoc-FTS2. PTX release kinetics of PTX/PEG5k-Fmoc-S-S-FTS2 was much slower than that of Taxol and PTX/PEG5k-Fmoc-FTS2 in normal release medium. In contrast, in glutathione (GSH)-containing medium, PTX in PEG5k-Fmoc-S-S-FTS2 micelles revealed faster and more complete release. Pharmacokinetics and tissue distribution study showed that our PEG5k-Fmoc-S-S-FTS2 system maintained PTX in circulation for a longer time and delivered more PTX to tumor sites with less accumulation in major organs. Finally, PTX-loaded PEG5k-Fmoc-S-S-FTS2 micelles resulted in a superior therapeutic effect in vivo compared to Taxol and PTX formulated in PEG5k-Fmoc-FTS2 micelles.

Amperometric Glucose Biosensor Based on Effective Self-Assembly Technology for Preparation of Poly(allylamine hydrochloride)/Au Nanoparticles Multilayers.

Novel nanomaterials and nanotechnology for use in bioassay applications represent a rapidly advancing field. This study developed a novel method to fabricate the glucose biosensor with good gold nanoparticles (AuNPs) fixed efficiency based on effective self-assembly technology for preparation of multilayers composed of poly(allylamine hydrochloride) (PAH) and AuNPs. The electrochemical properties of the biosensor based on (AuNPs/PAH)n/AuNPs/glucose oxide (GOD) with different multilayers were systematically investigated. Among the resulting glucose biosensors, electrochemical properties of the biosensor with three times self-assembly processes ((AuNPs/PAH)3/AuNPs/GOD) is best. The GOD biosensor exhibited a fast amperometric response (5 s) to glucose, a good linear current-time relation over a wide range of glucose concentrations from 0.05 to 162 mM, and a low detection limit of 0.029 mM. The GOD biosensor modified with (AuNPs/PAH)n layers will have essential significance and practical application in future owing to the simple method of fabrication and good performance.

Evaluation of the Transverse Displacement of the Proximal Segment After Bilateral Sagittal Split Ramus Osteotomy With Different Lingual Split Patterns and Advancement Amounts Using the Finite Element Method.

PURPOSE: To evaluate transverse displacement of the proximal segment after bilateral sagittal split ramus osteotomy (BSSO) advancement with different lingual split patterns and advancement amounts and to determine the influential factors related to mandibular width. MATERIALS AND METHODS: A 3-dimensional finite element model of the mandible including the temporomandibular joint was created for a presurgical simulation and for BSSO with lingual split patterns I (T1; Hunsuck split) and II (T2; Obwegeser split). The mandible was advanced 3 mm (A3) and 8 mm (A8) and fixated with a conventional titanium plate. Ansys software was used to measure the linear distances of the interproximal segments and to analyze the transverse displacement distribution of proximal segments after applying the load of masticatory muscle force groups. RESULTS: After surgical simulation, T1A3, T1A8, T2A3, and T2A8 showed increased transverse widths (mean, 2.99, 4.70, 2.36, and 4.42 mm, respectively). For transverse augmentation, there was a statistically significant difference between the 2 different mandibular advancement amounts in T1 and in T2 (P ≤ .000), but no significant differences was observed between T1 and T2 (P ≥ .058). The maximum transverse displacement distribution in the proximal segment was measured around the gonial area, and the early contact area was found near the border between the horizontal and sagittal osteotomy lines. CONCLUSION: Transverse displacements of proximal segments occur after BSSO advancement with T1 and T2 and transverse augmentation has statistically meaningful effects depending on the amount of advancement; however, no differences in transverse augmentation between T1 and T2 were identified. The fulcrum caused by the early contact between the proximal and distal segments could be an influential factor related to mandibular width.

Effect of Smo SiRNA-mediated Hedgehog Signaling Pathway Inhibition on Palatal Fusion.

We used Smo siRNA to inhibit hedgehog signaling pathway in embryonic day (E) 13 palatal shelves in organ culture. SiRNA 4 was chosen as the most efficient from four synthesized Smo siRNAs. Palatal shelf fusion rate of 4 µg/mL cyclopamine group was the lowest and significantly lower than that of blank control group (P<0.05), and that of siRNA 4 group was also lower than that of blank control group (P=0.183). At 48 h after transfection, Smo protein level of siRNA 4 group was 64.8% lower than that of blank control group (P<0.05), and Gli1 protein level of 4 µg/mL cyclopamine group was 68.9% lower than that of blank control group (P<0.05). Hedgehog signaling pathway inhibition decreased palatal fusion in organ culture, probably owing to downregulation of Smo and Gli1 proteins.

Developmental stalling and organ-autonomous regulation of morphogenesis.

Timing of organ development during embryogenesis is coordinated such that at birth, organ and fetal size and maturity are appropriately proportioned. The extent to which local developmental timers are integrated with each other and with the signaling interactions that regulate morphogenesis to achieve this end is not understood. Using the absolute requirement for a signaling pathway activity (bone morphogenetic protein, BMP) during a critical stage of tooth development, we show that suboptimal levels of BMP signaling do not lead to abnormal morphogenesis, as suggested by mutants affecting BMP signaling, but to a 24-h stalling of the intrinsic developmental clock of the tooth. During this time, BMP levels accumulate to reach critical levels whereupon tooth development restarts, accelerates to catch up with development of the rest of the embryo and completes normal morphogenesis. This suggests that individual organs can autonomously control their developmental timing to adjust their stage of development to that of other organs. We also find that although BMP signaling is critical for the bud-to-cap transition in all teeth, levels of BMP signaling are regulated differently in multicusped teeth. We identify an interaction between two homeodomain transcription factors, Barx1 and Msx1, which is responsible for setting critical levels of BMP activity in multicusped teeth and provides evidence that correlates the levels of Barx1 transcriptional activity with cuspal complexity. This study highlights the importance of absolute levels of signaling activity for development and illustrates remarkable self-regulation in organogenesis that ensures coordination of developmental processes such that timing is subordinate to developmental structure.

Cellulose fiber-based and engineered capillary foam toward a sustainable, recyclable, and high-performance cushioning structural material.

Foam materials have been widely used in cushioning packaging to ensure the integrity of products inside by absorbing energy and preventing collision. However, the extensive use of petroleum-based plastic foams may exacerbate environmental pollution and consume large amounts of energy. Therefore, there has been an increasing focus on producing high-performance and environmentally friendly foams in recent years. In this study, we developed a simple approach for manufacturing cellulose fiber-based capillary foams featuring superior stability and three-dimensional (3D) backbone network cross-linking structure composed of polyvinyl alcohol (PVA) and cationic starch (CS). The resultant capillary foam showed low density (0.154 g/cm3), superior mechanical properties (elastic modulus ranging from 77 to 501 kPa), high energy absorbing efficiency (32.8 %), and low cushioning coefficient (3.0). Besides, the end-of-life cellulose fiber-based capillary foam can be easily recycled for use, showing an attractive closed-loop cycle process. This study presents a unique option for creating affordable, eco-friendly, and malleable foams, demonstrating the potential to substitute the currently used petroleum-based foams in the packaging, food, and transport industries.

Fundamental investigation of micro-nano cellulose and lignin interaction for transparent paper: Experiment and electrostatic potential calculation.

Plastic has significant negative consequences for the environment and human health, demanding greener alternatives. Lignocellulose is a sustainable biomass material, and its paper has been considered as a potential material to replace plastics. Micro-nano lignocellulose, derived from natural plants, possesses a small size and abundant hydrogen bonding capacity. However, there is no clear explanation for the interactions between lignin and micro-nano cellulose, and little understanding of how the interaction can affect the papers' structure and optical properties. Electrostatic potential calculation is a reliable tool to explain non-covalent interactions, and can explore the binding between lignin and micro-nano cellulose. In this paper, kenaf - a non-wood fiber raw material - was employed to prepare micro-nano lignocellulose. The resulting slurry facilitated the production of transparent paper via a simple casting method. The prepared transparent micro-nano paper exhibited high transparency (~90 %), UVA resistance (~80 %), and hydrophobicity (~114°). More importantly, the electrostatic potential calculation demonstrates the inherent relationship between structure and performance, providing practical knowledge for constructing film materials.

Migration and accumulation of microplastics in soil-plant systems mediated by symbiotic microorganisms and their ecological effects.

The coexistence of microorganisms in complex soil environments greatly affects the environmental behavior and ecological effects of microplastics (MPs). However, relevant studies are sparse, and internal mechanisms remain unclear. Herein, arbuscular mycorrhizal fungi (AMF), a common symbiotic microorganism in the soil-plant system, was proved to significantly affect MPs absorption and migration with a "size effect". Specifically, the existence of AMF accelerated small-sized MPs (0.5 µm) uptake but slowed large-sized MPs (2 µm) uptake in lettuce. The content of 0.5 µm MPs absorbed by plants with AMF was 1.26 times that of the non-AMF group, while the content of 2 µm MPs was only 77.62 % that of non-AMF group. Additionally, the different effects of microorganisms on the intake content of MPs with different particle sizes in plants also led to different toxic effects of MPs on lettuce, that is, AMF exacerbated small-size MPs toxicity in lettuce (e.g., reduced plant biomass, photosynthesis, etc), and it weakened large-sized MPs toxicity (e.g., increased plant height, antioxidant enzyme activity, etc). The above phenomenon mainly because of the change in AMF on the plant root structure, which can be visually observed through the intraradical and extraradical hyphae. The symbiotic structure (hyphae) formed by AMF and host plants root could enhance the absorption pathway for small-sized MPs in lettuce, although not for large-sized MPs. Additionally, the effects of AMF varied with the soil environment of differently sized MPs, which promoted the migration of small-particle MPs to plants but aggravated large-particle MPs fixation at the soil interface. These findings could deepen the understanding of MPs pollution in terrestrial systems and provide theoretical basis and technical support to accurately assess soil MPs pollution.

Understanding the Role of Low-Dose Polystyrene Microplastic in Copper Toxicity to Rice Seed (Oryza sativa L.).

There is still much to learn with respect to the potential for microplastics (MPs) to interact with environmental toxins and biota. In the present study, we investigated the effect of MPs on the toxicity of copper (Cu) to rice seeds (Oryza sativa L.). The 7-day median effective concentration (EC50) value of MPs on rice seed germination was 864 mg/L (95% confidence interval [CI] 839 to 897 mg/L). We found that MPs slightly reduced Cu toxicity to rice seeds. The 7-day EC50 of Cu on rice seed germination increased from 7.29 mg/L (95% CI 7.10-7.52 mg/L) to 7.93 mg/L (95% CI 7.58-8.08 mg/L) in the presence of 20 mg/L MPs. We examined this toxicity reduction phenomenon by investigating the role of MPs in the process of Cu transport, Cu accumulation, and metabolic responses. Further investigation found that the MPs used in the present study hardly adsorbed Cu, but these MPs accumulated on the coats of rice seeds and significantly reduced Cu accumulation in rice seedlings. When Cu concentration was 10 mg/L, the presence of MPs reduced the accumulation of Cu in rice seedlings by 34%. We also found that, compared with only Cu present, the addition of MPs resulted in lower reactive oxygen species accumulation and higher catalase activity and glutathione levels in rice seedlings, which also contributed to Cu toxicity reduction. Collectively, the present study shows that polystyrene MPs have the potential to form associations with plant structures which can ultimately impact heavy metal bioaccessibility and therefore toxicity. Environ Toxicol Chem 2024;43:1870-1879. © 2024 SETAC.

Veillonella parvula acts as a pathobiont promoting the biofilm virulence and cariogenicity of Streptococcus mutans in adult severe caries.

Adult severe caries (ASC) brings severe oral dysfunction and treatment difficulties to patients, and yet no clear pathogenic mechanism for it has been found. This study is focused on the composition of dental plaque microbiome profiles in order to identify disease-relevant species and to investigate into their interactions with the S. mutans. Samples of dental plaque were collected for metagenomic analysis. The acidification, aciduricity, oxidative stress tolerance, and gtf (glucosyltransferase) gene expression of S. mutans cocultured with V. parvula which was identified as ASC-related dominant bacterium. The biofilm formation and extracellular exopolysaccharide (EPS) synthesis of dual-strain were analyzed with scanning electron microscopy (SEM), crystal violet (CV) staining, live/dead bacterial staining, and confocal laser scanning microscopy (CLSM). Furthermore, rodent model experiments were performed to validate the in vivo cariogenicity of the dual-species biofilm. The most significantly abundant taxon found associated with ASC was V. parvula. In vitro experiments found that V. parvula can effectively promote S. mutans mature biofilm formation with enhanced acid resistance, hydrogen peroxide detoxicity, and biofilm virulence. Rodent model experiments revealed that V. parvula was incapable of causing disease on its own, but it significantly heightened the biofilm virulence of S. mutans when being co-infected and augmented the progression, quantity, and severity of dental caries. Our findings demonstrated that V. parvula may act as a synergistic pathobiont to modulate the metabolic activity, spatial structure, and pathogenicity of biofilms of S. mutans in the context of ASC.IMPORTANCEAdult severe caries (ASC), as a special type of acute caries, is rarely reported and its worthiness of further study is still in dispute. Yet studies on the etiology of severe caries in adults have not found a clear pathogenic mechanism for it. Knowledge of the oral microbiota is important for the treatment of dental caries. We discovered that the interaction between V. parvula and S. mutans augments the severity of dental caries in vivo, suggesting V. parvula may act as a synergistic pathobiont exacerbating biofilm virulence of S. mutans in ASC. Our findings may improve the understanding of ASC pathogenesis and are likely to provide a basis for planning appropriate therapeutic strategies.