Trastuzumab-functionalized bionic pyrotinib liposomes for targeted therapy of HER2-positive breast cancer.

In this study, we prepared a bionic nanosystem of trastuzumab-functionalized SK-BR-3 cell membrane hybrid liposome-coated pyrotinib (Ptb-M-Lip-Her) for the treatment of HER2-positive breast cancer. Transmission electron microscopy, dynamic light scattering, polyacrylamide gel electrophoresis (SDS-PAGE) and western blotting were used to verify the successful preparation of Ptb-M-Lip-Her. In vitro drug release experiments proved that Ptb-M-Lip-Her had a sustained release effect. Cell uptake experiments and in vivo imaging experiments proved that Ptb-M-Lip-Her had good targeting ability to homologous tumor cells (SK-BR-3). The results of cell experiments such as MTT, flow cytometry, immunofluorescence staining and in vivo antitumor experiments showed that Ptb-M-Lip-Her could significantly promote apoptosis and inhibit the proliferation of SK-BR-3 cells. These results clearly indicated that Ptb-M-Lip-Her may be a promising biomimetic nanosystem for targeted therapy of HER2-positive breast cancer.

Stimulated Raman Scattering Microscopy Reveals Bioaccumulation of Small Microplastics in Protozoa from Natural Waters.

Microplastics (MPs) are pollutants of global concern, and bioaccumulation determines their biological effects. Although microorganisms form a large fraction of our ecosystem's biomass and are important in biogeochemical cycling, their accumulation of MPs has never been confirmed in natural waters because current tools for field biological samples can detect only MPs > 10 µm. Here, we show that stimulated Raman scattering microscopy (SRS) can image and quantify the bioaccumulation of small MPs (<10 µm) in protozoa. Our label-free method, which differentiates MPs by their SRS spectra, detects individual and mixtures of different MPs (e.g., polyethylene, polypropylene, polyvinyl chloride, polyethylene terephthalate, polystyrene, and poly(methyl methacrylate)) in protozoa. The ability of SRS to quantify cellular MP accumulation is similar to that of flow cytometry, a fluorescence-based method commonly used to determine cellular MP accumulation. Moreover, we discovered that protozoa in water samples from Yangtze River, Xianlin Wastewater Treatment Plant, Lake Taihu and the Pearl River Estuary accumulated MPs < 10 µm, but the proportion of MP-containing cells was low (∼2-5%). Our findings suggest that small MPs could potentially enter the food chain and transfer to organisms at higher trophic levels, posing environmental and health risks that deserve closer scrutiny.

The significance of the best puncture side bone cement/vertebral volume ratio to prevent paravertebral vein leakage of bone cement during vertebroplasty: a retrospective study.

OBJECTIVES: To verify the clinical significance of the best puncture-side bone cement/vertebral volume ratio (PSBCV/VV%) and bone cement leakage in paravertebral veins during vertebroplasty. METHODS: This was a retrospective analysis of a total of 210 patients from September 2021 to December 2022, who were divided into an observation group (110 patients) and a control group (100 patients). In the observation group, patients' preoperative computed tomography (CT) data were imported into Mimics software, and the VV was calculated using the three-dimensional (3D) reconstruction function. Then, based on the best PSBCV/VV% of 13.68% determined in a previous study, the optimal PSBCV to be injected during vertebroplasty was calculated. In the control group, vertebroplasty was performed directly using the conventional method. The incidence of cement leakage into paravertebral veins was observed postoperatively in both groups. RESULTS: There were no statistically significant differences (P > 0.05) in the evaluated indicators between the two groups pre- or postoperatively, including the anterior vertebral margin height, mid-vertebral height, injured vertebral Cobb angle, visual analogue scale (VAS) score, and Oswestry Disability Index (ODI). Intragroup comparisons showed improvements in the anterior vertebral height, mid-vertebral height, injured vertebral Cobb angle, VAS score, and ODI after surgery compared with before surgery (P < 0.05). In the observation group, there were 3 cases of cement leakage into the paravertebral veins, for a leakage rate of 2.7%. In the control group, there were 11 cases of cement leakage into the paravertebral veins, for a leakage rate of 11%. The difference in the leakage rate between the two groups was statistically significant (P = 0.016). CONCLUSION: In vertebroplasty, preoperative VV calculations using Mimics software, combined with calculation of the PSBCV according to the best PSBCV/VV% (13.68%), can effectively prevent leakage of bone cement into paravertebral veins and further prevent serious life-threatening complications such as pulmonary embolism.

Determination of the Accuracy of the Straight Bevel Gear Profiles by a Novel Optical Coaxial Multi-Ring Measurement Method.

Straight bevel gears are widely used in mining equipment, ships, heavy industrial equipment, and other fields due to their high capacity and robust transmission. Accurate measurements are essential in order to determine the quality of bevel gears. We propose a method for measuring the accuracy of the top surface profile of the straight bevel gear teeth based on binocular visual technology, computer graphics, error theory, and statistical calculations. In our method, multiple measurement circles are established at equal intervals from the small end of the top surface of the gear tooth to the large end, and the coordinates of the intersection points of these circles with the tooth top edge lines of the gear teeth are extracted. The coordinates of these intersections are fitted to the top surface of the tooth based on NURBS surface theory. The surface profile error between the fitted top surface of the tooth and the designed surface is measured and determined based on the product use requirements, and if this is less than a given threshold, the product is acceptable. With a module of 5 and an eight-level precision, such as the straight bevel gear, the minimum surface profile error measured was -0.0026 mm. These results demonstrate that our method can be used to measure surface profile errors in the straight bevel gears, which will broaden the field of in-depth measurements for the straight bevel gears.

Correlation analysis of the puncture-side bone cement/vertebral body volume ratio and bone cement leakage in the paravertebral vein in vertebroplasty.

OBJECTIVES: To explore the influencing factors of bone cement leakage in the paravertebral vein after vertebroplasty for the treatment of osteoporotic vertebral compression fractures (OVCFs) and to determine the correlation between the puncture-side bone cement/vertebral body volume ratio and bone cement leakage in the paravertebral vein. METHODS: This was a retrospective analysis of 495 patients (585 vertebral bodies) with OVCFs treated from August 2018 to May 2021 in our hospital. The patients' postoperative CT data were imported into Mimics software, and the three-dimensional(3D) reconstruction function was used to calculate the bone cement volume (BCV), puncture-side bone cement volume (PSBCV), and vertebral body volume (VBV); the bone cement/vertebral body volume ratio (BCV/VCV%) and puncture-side bone cement/vertebral body volume ratio (PSBCV/VCV%) were additionally calculated. Sex, Age, Body mass index(BMI), Bone density, BCV, PSBCV, VBV, BCV/VCV%, and PSBCV/VCV were compared between the leakage group and the non-leakage group. Logistic regression analysis was used to assess the correlations between the factors that statistically significantly differed between the two groups and the presence of leakage in the paravertebral veins. A receiver operating characteristic (ROC) curve was used to determine the diagnostic value of the PSBCV/VCV% and to obtain the optional cut-off value. RESULTS: A total of 102 males and 393 females with an average age of 72.89 (52 ~ 93) years were included in our study. There were 57 cases of cement leakage (59 vertebral bodies) in the paravertebral vein. There were 438 patients (526 vertebral bodies) without paravertebral cement leakage. Univariate analysis showed that the differences in sex, bone density, PSBCV, and PSBCV/VCV% between the two groups were statistically significant (P < 0.05). Logistic regression analysis showed that there were correlations between sex, bone density, and PSBCV/VCV% and the presence of paravertebral cement leakage (P < 0.05). The ROC curve showed that the area under the curve of the PSBCV/VCV% for the diagnosis of cement leakage in the paravertebral vein was greater than 0.65, and P < 0.05, indicating a diagnostic value. The best cut-off point for the diagnosis of paravertebral cement leakage with the PSBCV/VCV% was 13.68%, with a sensitivity of 84.7% and specificity of 37.8%. CONCLUSION: Sex, bone density, and PSBCV/VCV% are risk factors for cement leakage in the paravertebral veins after vertebroplasty for the treatment of OVCFs; the PSBCV/VCV% is strongly associated with paravertebral venous leakage, and the optimal PSBCV/VCV% is 13.68%. When the PSBCV/VCV% exceeds the optimal value, the risk of cement leakage in the paravertebral vein becomes significantly increased.

All-Organic Flexible Ferroelectret Nanogenerator with Fabric-Based Electrodes for Self-Powered Body Area Networks.

Due to their electrically polarized air-filled internal pores, optimized ferroelectrets exhibit a remarkable piezoelectric response, making them suitable for energy harvesting. Expanded polytetrafluoroethylene (ePTFE) ferroelectret films are laminated with two fluorinated-ethylene-propylene (FEP) copolymer films and internally polarized by corona discharge. Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)-coated spandex fabric is employed for the electrodes to assemble an all-organic ferroelectret nanogenerator (FENG). The outer electret-plus-electrode double layers form active device layers with deformable electric dipoles that strongly contribute to the overall piezoelectric response in the proposed concept of wearable nanogenerators. Thus, the FENG with spandex electrodes generates a short-circuit current which is twice as high as that with aluminum electrodes. The stacking sequence spandex/FEP/ePTFE/FEP/ePTFE/FEP/spandex with an average pore size of 3 µm in the ePTFE films yields the best overall performance, which is also demonstrated by the displacement-versus-electric-field loop results. The all-organic FENGs are stable up to 90 °C and still perform well 9 months after being polarized. An optimized FENG makes three light emitting diodes (LEDs) blink twice with the energy generated during a single footstep. The new all-organic FENG can thus continuously power wearable electronic devices and is easily integrated, for example, with clothing, other textiles, or shoe insoles.

Engineered extracellular vesicles derived from primary M2 macrophages with anti-inflammatory and neuroprotective properties for the treatment of spinal cord injury.

BACKGROUND: Uncontrollable inflammation and nerve cell apoptosis are the most destructive pathological response after spinal cord injury (SCI). So, inflammation suppression combined with neuroprotection is one of the most promising strategies to treat SCI. Engineered extracellular vesicles with anti-inflammatory and neuroprotective properties are promising candidates for implementing these strategies for the treatment of SCI. RESULTS: By combining nerve growth factor (NGF) and curcumin (Cur), we prepared stable engineered extracellular vesicles of approximately 120 nm from primary M2 macrophages with anti-inflammatory and neuroprotective properties (Cur@EVs-cl-NGF). Notably, NGF was coupled with EVs by matrix metalloproteinase 9 (MMP9)-a cleavable linker to release at the injured site accurately. Through targeted experiments, we found that these extracellular vesicles could actively and effectively accumulate at the injured site of SCI mice, which greatly improved the bioavailability of the drugs. Subsequently, Cur@EVs-cl-NGF reached the injured site and could effectively inhibit the uncontrollable inflammatory response to protect the spinal cord from secondary damage; in addition, Cur@EVs-cl-NGF could release NGF into the microenvironment in time to exert a neuroprotective effect against nerve cell damage. CONCLUSIONS: A series of in vivo and in vitro experiments showed that the engineered extracellular vesicles significantly improved the microenvironment after injury and promoted the recovery of motor function after SCI. We provide a new method for inflammation suppression combined with neuroprotective strategies to treat SCI.

Comparative cellular, physiological and transcriptome analyses reveal the potential easy dehulling mechanism of rice-tartary buckwheat (Fagopyrum Tararicum).

BACKGROUND: Tartary buckwheat has gained popularity in the food marketplace due to its abundant nutrients and high bioactive flavonoid content. However, its difficult dehulling process has severely restricted its food processing industry development. Rice-tartary buckwheat, a rare local variety, is very easily dehulled, but the cellular, physiological and molecular mechanisms responsible for this easy dehulling remains largely unclear. RESULTS: In this study, we integrated analyses of the comparative cellular, physiological, transcriptome, and gene coexpression network to insight into the reason that rice-tartary buckwheat is easy to dehull. Compared to normal tartary buckwheat, rice-tartary buckwheat has significantly brittler and thinner hull, and thinner cell wall in hull sclerenchyma cells. Furthermore, the cellulose, hemicellulose, and lignin contents of rice-tartary buckwheat hull were significantly lower than those in all or part of the tested normal tartary buckwheat cultivars, respectively, and the significant difference in cellulose and hemicellulose contents between rice-tartary buckwheat and normal tartary buckwheat began at 10 days after pollination (DAP). Comparative transcriptome analysis identified a total of 9250 differentially expressed genes (DEGs) between the rice- and normal-tartary buckwheat hulls at four different development stages. Weighted gene coexpression network analysis (WGCNA) of all DEGs identified a key module associated with the formation of the hull difference between rice- and normal-tartary buckwheat. In this specific module, many secondary cell wall (SCW) biosynthesis regulatory and structural genes, which involved in cellulose and hemicellulose biosynthesis, were identified as hub genes and displayed coexpression. These identified hub genes of SCW biosynthesis were significantly lower expression in rice-tartary buckwheat hull than in normal tartary buckwheat at the early hull development stages. Among them, the expression of 17 SCW biosynthesis relative-hub genes were further verified by quantitative real-time polymerase chain reaction (qRT-PCR). CONCLUSIONS: Our results showed that the lower expression of SCW biosynthesis regulatory and structural genes in rice-tartary buckwheat hull in the early development stages contributes to its easy dehulling by reducing the content of cell wall chemical components, which further effects the cell wall thickness of hull sclerenchyma cells, and hull thickness and mechanical strength.

[Preparation of angiopep-2-modified FITC-labeled neurotoxin nanoparticles and in vitro release characteristics].

In order to prepare angiopep-2 modified fluorescein isothiocyanate-labeled neurotoxin nanoparticles( ANG-NPs/FITCNT),emulsion/solvent evaporation method was used with m PEG-PLA and ANG-PEG-PLA( in proper proportions) as carriers and with FITC-NT as drug. With particle size and encapsulation efficiency as comprehensive indexes,the effects of different ultrasound power and ultrasound time combinations on the process were investigated. The in vitro release characteristics of nanoparticles in PBS buffer at p H 7. 4 and p H 6. 5 were investigated by dialysis method. The results indicated that the optimum process for preparing ANG-NPs/FITC-NT was as follows: ultrasonic power 90 W,ultrasonic time 30 s. In such optimal process,ANG-NPs/FITC-NT were well-shaped under the transmission electron microscope,with an average particle size of( 123. 9±0. 5) nm,Zeta potential of(-10. 5±0. 5) m V,encapsulation efficiency of( 68. 1±0. 4) %,and the drug loading of( 0. 82±0. 01) %. The in vitro drug release profiles of the nanoparticles in PBS buffer at p H 7. 4 and p H 6. 5 were both consistent with Ritger-Peppas equation,ln Q = 0. 508 8 lnt-2. 285 0,r = 0. 961 5( p H 7. 4) and ln Q= 0. 449 9 lnt-1. 855 3,r = 0. 970 3( p H 6. 5),respectively. The experiment results proved that the nanoparticles prepared by emulsion/solvent evaporation method had uniform particle size,high encapsulation efficiency and in vitro sustained release characteristic,which might be a potential carrier for NT intracerebral drug delivery.

Highly Polarizable Triiodide Anions (I3(-)) as Cross-Linkers for Coordination Polymers: Closing the Semiconductive Band Gap.

From a hydrothermal reaction using CuI, KI, and 3,3'5,5'-tetramethyl-4,4'-bipyrazole (TMBP), the triiodide anion I3(-) has been integrated into the water-stable 2D coordination polymer Cu(TMBP)I3 (1). In contrast with other metal triiodide complexes, 1 features remarkably small distortions in the bond distances associated with the I3(-) units (i.e., the Cu-I and I-I bonds), which effectively link up the copper(I) centers into infinite CuI3 chains. The electronic band gaps and electrical conductivity data are also found to be consistent with the I3(-) ion acting as an effective linker across the copper(I) centers.

Is distal fibular fracture an absolute contraindication to free fibular flap harvesting? A review of evidence in the literature and illustration by a successful case.

Despite the advantages of a fibula flap, many surgeons would often be hesitant in its use in patients with a history of distal fibular fracture. The chief concern is the potential vascular damage sustained during the injury. From our experience, however, we noticed that the blood supply of various components of a fibula flap rarely relies on its distal part alone. Avoiding the use of this flap may unnecessarily forgo the optimal reconstructive option in many patients. Free fibula flap was harvested from a 41-year-old man who had a history of left fibula fracture 10 years before surgery. The fracture was treated with open reduction with internal fixation. The plate was removed 1 year after the trauma surgery. We used this fractured and healed fibula to reconstruct the intraoral and mandibular defect after tumor extirpation. The harvesting process was straight-forward and the flap survived uneventfully. On the basis of our experience and current evidence in the literature, we believe that a history of previous fibular fracture should not be considered as an absolute contraindication for free fibular flap harvesting. With a good knowledge of the lower limb anatomy and appropriate patient selection, the fibular flap can still be a safe option that incurs no additional risk.

Development of new materials for electrothermal metals using data driven and machine learning.

After adopting a combined approach of data-driven methods and machine learning, the prediction of material performance and the optimization of composition design can significantly reduce the development time of materials at a lower cost. In this research, we employed four machine learning algorithms, including linear regression, ridge regression, support vector regression, and backpropagation neural networks, to develop predictive models for the electrical performance data of titanium alloys. Our focus was on two key objectives: resistivity and the temperature coefficient of resistance (TCR). Subsequently, leveraging the results of feature selection, we conducted an analysis to discern the impact of alloying elements on these two electrical properties.The prediction results indicate that for the resistivity data prediction task, the radial basis function kernel-based support vector machine model performs the best, with a correlation coefficient above 0.995 and a percentage error within 2%, demonstrating high predictive capability. For the TCR data prediction task, the best-performing model is a backpropagation neural network with two hidden layers, also with a correlation coefficient above 0.995 and a percentage error within 3%, demonstrating good generalization ability. The feature selection results using random forest and Xgboost indicate that Al and Zr have a significant positive effect on resistivity, while Al, Zr, and V have a significant negative effect on TCR. The conclusion of the composition optimization design suggests that to achieve both high resistivity and TCR, it is recommended to set the Al content in the range of 1.5% to 2% and the Zr content in the range of 2.5% to 3%.

Activation of Dopamine Receptor D1 and Downstream Cellular Functions by Polydopamine.

Polydopamine is a remarkable molecule that has gained considerable attention for its role in material surface modification, leading to an abundance of research in the biomaterial domain. While its widespread use is well documented, the molecule's potential cellular interactions have been less explored. In particular, dopamine serves as a neurotransmitter and a hormone that interacts with dopamine receptors in cells. Our study sheds light on the previously unexamined interaction between polydopamine and dopamine receptor D1 (DRD1). We discovered that polydopamine, along with its derivatives, such as levodopa and catechol, can activate DRD1─a function previously attributed solely to dopamine. Moreover, we found that polydopamine has the ability to influence cell behavior through the cAMP/PKA pathway, thereby affecting RhoA activity and stress fiber formation. These observations invite further consideration regarding the biological safety of polydopamine in biomedical contexts and also open avenues for new research directions in designing bioactive functional materials.

Maleic anhydride-functionalized cellulose nanocrystal-stabilized high internal phase Pickering emulsion for pesticide delivery.

The salt-responsiveness of Pickering emulsions has significantly influenced their applications due to the large amount of salt on the surface of plant leaves. The present study provided a maleic anhydride-functionalized cellulose nanocrystal-stabilized high internal phase Pickering emulsion (MACNCs-HIPPEs) that was stable to high-concentration salt and used for pesticide delivery. The stability of MACNCs-HIPPEs was investigated by adjusting the oil-phase volume fraction (φ), the MACNCs concentration, NaCl dosages, and the rheological properties. The high internal phase Pickering emulsion was obtained at φ of 0.8 and MACNCs concentration of 2wt% and showed excellent salt stability (NaCl, 1200 mM) and significant storage stability (60 days). The sustained release of imidacloprid (IMI) from imidacloprid-loaded MACNCs-HIPPEs (IMI@MACNCs-HIPPEs) showed a positive correlation to the temperature (15°C, 25°C, 35°C), indicating clear thermo-responsiveness of the prepared pesticide formulation. The test of spread and retention of IMI@MACNCs-HIPPEs on the leaf surface showed a significant advantage compared with the commercial IMI water dispersible granules (CG). All the advantages mentioned above showed the excellent potential of the MACNCs-HIPPEs in delivering lipophilic pesticides.

Metal element-fusion peptide heterostructured nanocoatings endow polyetheretherketone implants with robust anti-bacterial activities and in vivo osseointegration.

Polyetheretherketone (PEEK), renowned for its exceptional mechanical properties and bio-stability, is considered a promising alternative to traditional metal-based implants. However, the inferior bactericidal activity and the limited angiogenic and osteogenic properties of PEEK remain the three major obstacles to osseointegration in vivo. To overcome these obstacles, in this work, a versatile heterostructured nanocoating was conceived and equipped on PEEK. This nanocoating was designed to endow PEEK with the ability of photo-activated pathogen disinfection, along with enhanced angiogenesis and osteogenesis, effectively addressing the triple-barrier challenge towards osseointegration. The crafted nanocoating, encompassing diverse nutritional metal elements (Fe3+, Mg2+, and Sr2+) and a fusion peptide adept at promoting angiogenesis and osteogenesis, was seamlessly decorated onto PEEK. The engineered implant exhibited an antibacterial activity of over 94% upon near-infrared illumination by virtue of the photothermal conversion of the polyphenol nanocoating. Simultaneously, the decorated hierarchical nanocoatings synergistically promoted cellular adhesion and proliferation and up-regulated angiogenesis-/osteogenesis-associated cytokine expression in endothelial/osteoblast cells, resulting in superior angiogenic differentiation and osteoinductive capability in vitro. Moreover, an in vivo assay in a rabbit femoral defect model revealed that the decorated implant can achieve ameliorative osseointegrative fixation. Collectively, this work offers a practical and instructive clinical strategy to address the triple-barrier challenge associated with PEEK-based implants.

Characteristics of Pickering emulsions stabilized by microgel particles of five different plant proteins and their application.

Pickering emulsions stabilized by protein particles are of great interest for use in real food systems. This study was to investigate the properties of microgel particles prepared from different plant proteins, i.e., soybean protein isolate (SPI), pea protein isolate (PPI), mung bean protein isolate (MPI), chia seed protein isolate (CSPI), and chickpea protein isolate (CPI). MPI protein particles had most desirable Pickering emulsion forming ability. The particles of SPI and PPI had similar particle size (316.23 nm and 294.80 nm) and surface hydrophobicity (2238.40 and 2001.13) and emulsion forming ability, while the CSPI and CPI particle stabilized emulsions had the least desirable properties. The MPI and PPI particle stabilized Pickering emulsions produced better quality ice cream than the one produced by SPI particle-stabilized emulsions. These findings provide insight into the properties of Pickering emulsions stabilized by different plant protein particles and help expand their application in emulsions and ice cream.

Gelatin hydrogel reinforced with mussel-inspired polydopamine-functionalized nanohydroxyapatite for bone regeneration.

Developing high-strength hydrogels with biocompatibility and bone conductibility is still desirable for bone regeneration. The nanohydroxyapatite (nHA) was incorporated into a dopamine-modified gelatin (Gel-DA) hydrogel system to create a highly biomimetic native bone tissue microenvironment. In addition, to further increase the cross-linking density between nHA and Gel-DA, nHA was functionalized by mussel-inspired polydopamine (PDA). Compared with nHA, adding polydopamine functionalized nHA (PHA) increased the compressive strength of Gel-Da hydrogel from 449.54 ± 180.32 kPa to 611.18 ± 211.86 kPa without affecting its microstructure. Besides, the gelation time of Gel-DA hydrogels with PHA incorporation (GD-PHA) was controllable from 49.47 ± 7.93 to 88.11 ± 31.18 s, contributing to its injectable ability in clinical applications. In addition, the abundant phenolic hydroxyl group of PHA was beneficial to the cell adhesion and proliferation of Gel-DA hydrogels, leading to the excellent biocompatibility of Gel-PHA hydrogels. Notably, the GD-PHA hydrogels could accelerate the bone repair efficiency in the rat model of the femoral defect. In conclusion, our results suggest the Gel-PHA hydrogel with osteoconductivity, biocompatibility, and enhanced mechanical properties is a potential bone repair material.

Effects of nanoplastics on clam Ruditapes philippinarum at environmentally realistic concentrations: Toxicokinetics, toxicity, and gut microbiota.

Nanoplastics are ubiquitous in marine environments, understanding to what extent nanoplastics accumulate in bivalves and the adverse effects derived from their retention is imperative for evaluating the detrimental effects in the benthic ecosystem. Here, using palladium-doped polystyrene nanoplastics (139.5 nm, 43.8 mV), we quantitatively determined nanoplastic accumulation in Ruditapes philippinarum and investigated its toxic effects by combining physiological damage assessments with a toxicokinetic model and 16 S rRNA sequencing. After a 14 days exposure, significant nanoplastic accumulation was observed, up to 17.2 and 137.9 mg·kg-1 for the environmentally realistic (0.02 mg·L-1) and ecologically (2 mg·L-1) relevant groups, respectively. Ecologically relevant nanoplastic concentrations evidently attenuated the total antioxidant capacity and stimulated excessive reactive oxygen species, which elicited lipid peroxidation, apoptosis, and pathological damage. The modeled uptake (k1) and elimination (k2) rate constants (from physiologically based pharmacokinetic model) were significantly negatively correlated with short-term toxicity. Although no obvious toxic effects were found, environmentally realistic exposures notably altered the intestinal microbial community structure. This work increases our understanding of how the accumulation of nanoplastics influences their toxic effects in terms of the toxicokinetics and gut microbiota, providing further evidence of their potential environmental risks.

Performance-enhanced regenerated cellulose film by adding grape seed extract.

Eco-friendly packaging material with intelligent colorimetric performance has been a requirement for food safety and quality. This work focused on a food packaging material from regenerated cellulose films that added the grape seed extract (GSE) and polyethylene glycol 200 (PEG). FTIR and SEM techniques were employed to prove the compatibility of GSE with cellulose matrix. The composite film showed an enhanced elongation at break (16.61 %) and tensile strength (33.09 MPa). The addition of PEG and GSE also improved the water contact angle of regenerated-cellulose film from 53.8° to 83.8°. Moreover, the composite films exhibited UV-blocking properties while maintaining adequate transparency. The GSE induced the regenerated films with a macroscopic change in color under different pH conditions. Furthermore, the loading of GSE slowed down the decomposition of strawberries and delayed the self-biodegradation compared with the control for more than 3 days and 18 days. The present study showed a regenerated cellulose film with acceptable mechanical and hydrophilia properties, pH-responsiveness, anti-decomposition, and delayed biodegradation performances, indicating a potential color sensor in food packaging.

Biomechanical and osteointegration study of 3D-printed porous PEEK hydroxyapatite-coated scaffolds.

The objective of this study as to evaluate the biomechanical and osteointegration properties of 3D printed porous polyetheretherketone (PEEK) with hydroxyapatite (HA) coating by simulated body fluid (SBF) method. Cylindrical scaffolds were designed and fabricated by using PEEK material through fused deposition molding (FDM). The scaffolds were divided into solid group, porous group and porous-HA group (decorated by hydroxyapatite). The mechanical properties of each group of scaffolds were tested. Then, a total of 12 New Zealand rabbits were implemented for implantation of scaffolds at femoral condyle. Finally, the osteointegration ability of scaffolds were evaluated by Micro computed tomography (Micro-CT), histology and fluorescence staining. The HA was successfully decorated on the surface of the PEEK scaffold. The modulus of solid, porous and porous-HA group was 1289.43 ± 71.44 MPa, 196.36 ± 9.89 MPa and 183.29 ± 7.71 MPa, and the compressive strength was 107.24 ± 5.15 MPa, 33.12 ± 3.86 MPa and 29.99 ± 4.16 MPa, respectively. The micro-CT results showed that the bone volume/total volume ratio (BV/TV) in the porous-HA group was significantly greater than that in solid and porous group. Compared with porous group, the trabecular number (Tb. N) and trabecular thickness (Tb. Th) of porous-HA group was higher, and the trabecular spacing (Tb. Sp) was lower. The histology and fluorescence staining showed that more new bone tissue was formed in the porous-HA at different periods compared with the porous and solid groups. In addition, according to the results of the biomechanical test and osteointegration assessment, the biomechanical properties of 3D-printed porous PEEK scaffolds are close to human trabecular bone tissue, and the hydroxyapatite coating does not degrade its biomechanical performance. The porous structure can facilitate the integration of bone tissue, and the HA coating can markedly improve this process.