Filler-Enhanced Piezoelectricity of Poly-L-Lactide and Its Use as a Functional Ultrasound-Activated Biomaterial.

Poly-L-lactide (PLLA) offers a unique possibility for processing into biocompatible, biodegradable, and implantable piezoelectric structures. With such properties, PLLA has potential to be used as an advanced tool for mimicking biophysical processes that naturally occur during the self-repair of wounds and damaged tissues, including electrostimulated regeneration. The piezoelectricity of PLLA strongly depends on the possibility of controlling its crystallinity and molecular orientation. Here, it is shown that modifying PLLA with a small amount (1 wt%) of crystalline filler particles with a high aspect ratio, which act as nucleating agents during drawing-induced crystallization, promotes the formation of highly crystalline and oriented PLLA structures. This increases their piezoelectricity, and the filler-modified PLLA films provide a 20-fold larger voltage output than nonmodified PLLA during ultrasound (US)-assisted activation. With 99% PLLA content, the ability of the films to produce reactive oxygen species (ROS) and increase the local temperature during interactions with US is shown to be very low. US-assisted piezostimulation of adherent cells directly attach to their surface (such as skin keratinocytes), stimulate cytoskeleton formation, and as a result cells elongate and orient themselves in a specific direction that align with the direction of PLLA film drawing and PLLA dipole orientation.

Prussian Blue Nanoparticle-Entrapped GelMA Gels Laden with Mesenchymal Stem Cells as Prospective Biomaterials for Pelvic Floor Tissue Repair.

Pelvic organ prolapse (POP) seriously affects elderly patients' quality of life, and new repair materials are urgently needed. To solve this problem, we synthesized methacrylated gelatin (GelMA) hydrogels and incorporated photothermally active Prussian blue nanoparticles (PBNPs) to synthesize PBNP@GelMA. Then, MSCs were encapsulated in the PBNP@GelMA and exposed to a 1.0 W/cm2 of 808 nm laser for 10 min to perform heat shock pretreatment for the implantation of mesenchymal stem cells (MSCs). Next, we tested the repair efficacy of scaffold-cell complexes both in vitro and in vivo. Our results reveal that the heat shock treatment induced by PBNP@GelMA improved the viability of MSCs, and the underlying mechanism may be related to HSP70. Furthermore, 2 weeks after implantation in the SD rat model, the collagen content increased in the MSC implantation group and PBNP@GelMA implantation group. However, the muscle regeneration at the implanting position was mostly enhanced after the implantation of the heat-shock-pretreated MSCs, which illustrates that heat shock treatment can further promote the MSC-mediated muscle regeneration. Therefore, manipulating the cell environment and providing proper heat stimulus by using PBNP@GelMA with NIR is a novel strategy to enhance the regenerative potential of MSCs and to promote pelvic tissue repair.

Digital design and fabrication of a template to prepare guiding planes in removable partial denture abutments.

Guiding planes are essential to the success of removable partial dentures (RPDs). With computer-aided design and computer-aided manufacturing (CAD-CAM), this report presents a novel method of designing and fabricating preparation templates to precisely prepare guiding planes for RPD abutments.

Overview of microplastic pollution and its influence on the health of organisms.

Microplastic pollution has gradually become a major global concern, due to the widespread use of plastics. Microplastics enter the environment and are degradated, while also being ingested by organisms, affecting various physiological functions and adversely affecting the health of organisms. Microplastic pollution is currently a wide concern, but data on the impact on organisms is still not sufficient. Therefore, this review summarizes the research on microplastic pollution in marine, soil and fresh water, and its impact on organisms, focusing on the effects of microplastics on organisms' feeding behavior and oxidative stress responses, intestinal microbes and reproductive function, and the combined effects of microplastic pollutants on organisms. We also summarized the various possible ways of microplastics entering into the human body, and posing a potential threat to human health, which still needs further research.

Mach-Zehnder interferometer based integrated-photonic acetone sensor approaching the sub-ppm level detection limit.

The detection of acetone in the gaseous form in exhaled breath using an integrated sensor can provide an effective tool for disease diagnostics as acetone is a marker for monitoring human metabolism. An on-chip acetone gas sensor based on the principle of Mach-Zehnder interferometer is proposed and demonstrated. The sensing arm of the device is activated with a composite film of polyethyleneimine and amido-graphene oxide as the gas-sensitive adsorption layer. The composite film demonstrates good selectivity to acetone gas, can be used repeatedly, and is stable in long-term use. Room temperature operation has been demonstrated for the sensor with high sensitivity under a 20 ppm acetone environment. The detection limit can reach 0.76 ppm, making it feasible to be used for the clinical diagnosis of diabetes and the prognosis of heart failure.

Deficient activity of alanyl-tRNA synthetase underlies an autosomal recessive syndrome of progressive microcephaly, hypomyelination, and epileptic encephalopathy.

Aminoacyl-transfer RNA (tRNA) synthetases ligate amino acids to specific tRNAs and are essential for protein synthesis. Although alanyl-tRNA synthetase (AARS) is a synthetase implicated in a wide range of neurological disorders from Charcot-Marie-Tooth disease to infantile epileptic encephalopathy, there have been limited data on their pathogenesis. Here, we report loss-of-function mutations in AARS in two siblings with progressive microcephaly with hypomyelination, intractable epilepsy, and spasticity. Whole-exome sequencing identified that the affected individuals were compound heterozygous for mutations in AARS gene, c.2067dupC (p.Tyr690Leufs*3) and c.2738G>A (p.Gly913Asp). A lymphoblastoid cell line developed from one of the affected individuals showed a strong reduction in AARS abundance. The mutations decrease aminoacylation efficiency by 70%-90%. The p.Tyr690Leufs*3 mutation also abolished editing activity required for hydrolyzing misacylated tRNAs, thereby increasing errors during aminoacylation. Our study has extended potential mechanisms underlying AARS-related disorders to include destabilization of the protein, aminoacylation dysfunction, and defective editing activity.

Competitive molecular-/ion-recognition responsive characteristics of poly(N-isopropylacrylamide-co-benzo-12-crown-4-acrylamide) copolymers with benzo-12-crown-4 as both guest and host units.

Novel dual molecular- and ion-recognition responsive poly(N-isopropylacrylamide-co-benzo-12-crown-4-acrylamide) (PNB12 C4 ) linear copolymers with benzo-12-crown-4 (B12C4) as both guest and host units are prepared. The copolymers exhibit highly selective sensitivities toward γ-cyclodextrin (γ-CD) and Na(+) . The presence of γ-CD induces the lower critical solution temperature (LCST) of PNB12 C4 copolymer to shift to a higher value due to the formation of 1:1 γ-CD/B12C4 host-guest inclusion complexes, while Na(+) causes a negative shift in LCST due to the formation of 2:1 "sandwich" B12C4/Na(+) host-guest complexes. Regardless of the complexation order, when γ-CD and Na(+) coexist with PNB12 C4 , competitive complexation actions of B12C4 as both guest and host units toward γ-CD and Na(+) finally form equilibrium 2:2:1 γ-CD/B12C4/Na(+) composite complexes, and the final LCST values of PNB12 C4 copolymer reach almost the same level. The results provide valuable guidance for designing and applying PNB12 C4 -based smart materials in various applications.

[Construction of a novel tissue engineered meniscus scaffold based on low temperature deposition three-dimenisonal printing technology].

Objective: To investigate the construction of a novel tissue engineered meniscus scaffold based on low temperature deposition three-dimenisonal (3D) printing technology and evaluate its biocompatibility. Methods: The fresh pig meniscus was decellularized by improved physicochemical method to obtain decellularized meniscus matrix homogenate. Gross observation, HE staining, and DAPI staining were used to observe the decellularization effect. Toluidine blue staining, safranin O staining, and sirius red staining were used to evaluate the retention of mucopolysaccharide and collagen. Then, the decellularized meniscus matrix bioink was prepared, and the new tissue engineered meniscus scaffold was prepared by low temperature deposition 3D printing technology. Scanning electron microscopy was used to observe the microstructure. After co-culture with adipose-derived stem cells, the cell compatibility of the scaffolds was observed by cell counting kit 8 (CCK-8), and the cell activity and morphology were observed by dead/live cell staining and cytoskeleton staining. The inflammatory cell infiltration and degradation of the scaffolds were evaluated by subcutaneous experiment in rats. Results: The decellularized meniscus matrix homogenate appeared as a transparent gel. DAPI and histological staining showed that the immunogenic nucleic acids were effectively removed and the active components of mucopolysaccharide and collagen were remained. The new tissue engineered meniscus scaffolds was constructed by low temperature deposition 3D printing technology and it had macroporous-microporous microstructures under scanning electron microscopy. CCK-8 test showed that the scaffolds had good cell compatibility. Dead/live cell staining showed that the scaffold could effectively maintain cell viability (>90%). Cytoskeleton staining showed that the scaffolds were benefit for cell adhesion and spreading. After 1 week of subcutaneous implantation of the scaffolds in rats, there was a mild inflammatory response, but no significant inflammatory response was observed after 3 weeks, and the scaffolds gradually degraded. Conclusion: The novel tissue engineered meniscus scaffold constructed by low temperature deposition 3D printing technology has a graded macroporous-microporous microstructure and good cytocompatibility, which is conducive to cell adhesion and growth, laying the foundation for the in vivo research of tissue engineered meniscus scaffolds in the next step.

Effects of Surface Textures Created Using Additive Manufacturing on Shear Bond Strength Between Resin and Zirconia.

PURPOSE: This investigation aimed to assess the impact of additive manufacturing-generated surface textures on zirconia bond strength. MATERIALS AND METHODS: Zirconia samples (n = 144) fabricated using digital light-processing (DLP) technology were categorized into 6 groups according to the type of surface conditioning (group NN: no designs, no air abrasion; group NY: no designs, with air abrasion; group GN: groove designs, no air abrasion; group GY: groove designs with air abrasion; group HN: hexagon grid, no air abrasion; group HY: hexagon grid, with air abrasion). Composite resin cylinders were cemented to the treated zirconia surfaces with dual-curing, self-adhesive resin cement (Clearfil SA Luting). The shear bond strength (SBS) was tested after water storage for 3 days or 3 days with an additional 10,000 thermocycles. RESULTS: The zirconia samples fabricated using DLP technology have high accuracy. The SBS of the NY, GY, and HY groups did not significantly differ after 3 days, and neither did the SBS of the NN, GN, and HN groups. The NN, NY, and HY groups exhibited reduced SBS compared to their initial values following artificial aging, while the SBS of the remaining three groups were not diminished. The GY group obtained the highest SBS value after aging. CONCLUSION: Printing grooves with air abrasion can improve the bond strength.

The impact of microplastics polystyrene on the microscopic structure of mouse intestine, tight junction genes and gut microbiota.

Microplastics, which are tiny plastic particles less than 5 mm in diameter, are widely present in the environment, have become a serious threat to aquatic life and human health, potentially causing ecosystem disorders and health problems. The present study aimed to investigate the effects of microplastics, specifically microplastics-polystyrene (MPs-PS), on the structural integrity, gene expression related to tight junctions, and gut microbiota in mice. A total of 24 Kunming mice aged 30 days were randomly assigned into four groups: control male (CM), control female (CF), PS-exposed male (PSM), and PS-exposed female (PSF)(n = 6). There were significant differences in villus height, width, intestinal surface area, and villus height to crypt depth ratio (V/C) between the PS group and the control group(C) (p <0.05). Gene expression analysis demonstrated the downregulation of Claudin-1, Claudin-2, Claudin-15, and Occludin, in both duodenum and jejunum of the PS group (p < 0.05). Analysis of microbial species using 16S rRNA sequencing indicated decreased diversity in the PSF group, as well as reduced diversity in the PSM group at various taxonomic levels. Beta diversity analysis showed a significant difference in gut microbiota distribution between the PS-exposed and C groups (R2 = 0.113, p<0.01), with this difference being more pronounced among females exposed to MPs-PS. KEGG analysis revealed enrichment of differential microbiota mainly involved in seven signaling pathways, such as nucleotide metabolism(p<0.05). The relative abundance ratio of transcriptional pathways was significantly increased for the PSF group (p<0.01), while excretory system pathways were for PSM group(p<0.05). Overall findings suggest that MPs-PS exhibit a notable sex-dependent impact on mouse gut microbiota, with a stronger effect observed among females; reduced expression of tight junction genes may be associated with dysbiosis, particularly elevated levels of Prevotellaceae.

Polyvinyl alcohol/collagen composite scaffold reinforced with biodegradable polyesters/gelatin nanofibers for adipose tissue engineering.

Breast cancer has become the most diagnosed cancer type, endangering the health of women. Patients with breast resection are likely to suffer serious physical and mental trauma. Therefore, breast reconstruction becomes an important means of postoperative patient rehabilitation. Polyvinyl alcohol hydrogel has great potential in adipose tissue engineering for breast reconstruction. However, its application is limited because of the lack of bioactive factors and poor structural stability. In this study, we prepared biodegradable polylactic acid-glycolic acid copolymer/polycaprolactone/gelatin (PPG) nanofibers. We then combined them with polyvinyl alcohol/collagen to create tissue engineering scaffolds to overcome limitations. We found that PPG fibers formed amide bonds with polyvinyl alcohol/collagen scaffolds. After chemical crosslinking, the number of amide bonds increased, leading to a significant improvement in their mechanical properties and thermal stability. The results showed that compared with pure PVA scaffolds, the maximum compressive stress of the scaffold doped with 0.9 g nanofibers increased by 500 %, and the stress loss rate decreased by 40.6 % after 10 cycles of compression. The presence of natural macromolecular gelatin and the changes in the pore structure caused by nanofibers provide cells with richer and more three-dimensional adsorption sites, allowing them to grow in three dimensions on the scaffold. So, the hydrogel scaffold by reinforcing polyvinyl alcohol hydrogel with PPG fibers is a promising breast reconstruction method.

Digital fabrication of complete dentures using a combination of additive and subtractive manufacturing technologies.

Fabrication of complete dentures in the traditional way is a labor-intensive and time-consuming method. This article reports a series of novel digital methods for impression making, design and fabrication processes for complete dentures. It is highly anticipated that this novel method could improve the efficiency and accuracy of the design and fabrication of complete dentures.

Surface Texture Designs to Improve the Core-Veneer Bond Strength of Zirconia Restorations Using Digital Light Processing.

Veneered zirconia ceramics are widely used for dental restorations. However, the relatively poor bonding strength between the ceramic core and veneer porcelain remains a common problem in clinical applications. To address this issue, this study focused on enhancing the core-veneer bond strength of zirconia restorations through the implementation of surface textures using digital light processing (DLP) technology. The light intensity was precisely tuned to optimize mechanical strength and minimize light scattering. Subsequently, hexagonal or square grids were printed on the surface of the zirconia ceramic core. Following veneering procedures, the shear bond strength (SBS) test was conducted using a universal testing machine. Dates were compared using analysis of variance (ANOVA) and the least significant difference (LSD) test. Furthermore, optical microscopy and scanning electron microscopy (SEM) were used to examine the failure modes and observe the cross-sectional structures, respectively. The results indicated that the presence of a 0.09 mm high hexagon grid led to a significant 21% increase in the SBS value. However, grids with heights of 0.2 and 0.3 mm showed less improvement, owing to the formation of large defects at the interface during the fusion process. This study demonstrated the potential of DLP technology in preparing zirconia ceramics with complex structures and high mechanical strength, thereby offering promising solutions for overcoming challenges associated with dental applications.

Antimicrobial films fabricated with myricetin nanoparticles and chitosan derivation microgels for killing pathogenic bacteria in drinking water.

Pathogenic bacteria in drinking water threaten human health and life. In the work, antimicrobial films composed of myricetin@tannic acid (My@TA) nanoparticles (NPs) and chitosan derivation microgels were developed to kill pathogenic bacteria in drinking water. Hydrophobic My was first made into water soluble My@TA NPs using a solvent exchange method with TA as stabilizer. Polymeric microgels of carboxymethyl chitosan (CMCS)/hydroxypropyltrimethyl ammonium chloride chitosan (HACC) were then fabricated with a blending method. CMCS&HACC/My@TA multilayer films were further deposited on the internal surface of PET bottles by using a layer-by-layer (LbL) assembly technique. The PET bottles coated with the films could effectively kill pathogenic bacteria in water such as S. aureus, E. coli, Staphylococcus epidermidis, Pseudomonas fluorescens, Listeria monocytogenes and methicillin resistant Staphylococcus aureus (MRSA). In addition, CMCS&HACC/My@TA films displayed good antioxidant activity, water resistance, and in vivo biocompatibility with heart, liver, spleen, lung and kidney organs. We believe that the container coated with CMCS&HACC/My@TA films can be applied to prevent microbial contamination of drinking water.

Investigation of the hydration of nonfouling material poly(ethylene glycol) by low-field nuclear magnetic resonance.

The strong surface hydration layer of nonfouling materials plays a key role in their resistance to nonspecific protein adsorption. Poly(ethylene glycol) (PEG) is an effective example of materials that can resist nonspecific protein adsorption and cell adhesion. Thus, the strong interaction between water molecules and PEG was investigated through each T(2) component in water/PEG mixtures using multiexponential inversion of T(2) relaxation time measured by the Carr-Purcell-Meiboom-Gill (CPMG) sequence of low-field nuclear magnetic resonance (LF-NMR). Results show that about one water molecule is tightly bound with one ethylene glycol (EG) unit, and additional water molecules over 1:1 ratio mainly swell the PEG matrix and are not tightly bound with PEG. This result was also supported by the endothermic behavior of water/PEG mixtures measured by differential scanning calorimetry (DSC). It is believed that the method developed could be also applied to investigate various interactions between macromolecules and other small molecules without using deuterium samples, which might open a novel route to quantitatively measure guest-host interactions in the future.

Latest on biomaterial-based therapies for topical treatment of psoriasis.

Psoriasis is an autoimmune inflammatory disease which is fundamentally different from dermatitis. Its treatments include topical medications and systemic drugs depending on different stages of the disease. However, these commonly used therapies are falling far short of clinical needs due to various drawbacks. More precise therapeutic strategies with minimized side effects and improved compliance are highly demanded. Recently, the rapid development of biomaterial-based therapies has made it possible and promising to attain topical psoriasis treatment. In this review, we briefly describe the significance and challenges of the topical treatment of psoriasis and emphatically overview the latest progress in novel biomaterial-based topical therapies for psoriasis including microneedles, nanoparticles, nanofibers, and hydrogels. Current clinical trials related to each biomaterial are also summarized and discussed.

Poly(lactic acid-co-glycolic acid)-based celecoxib extended-release microspheres for the local treatment of traumatic heterotopic ossification.

Traumatic heterotopic ossification (THO) is a serious and common clinical post-traumatic complication for which there is no effective and safe drug treatment. Routine administration of nonsteroidal anti-inflammatory drugs (NSAIDs) after injury is extensively used approach for THO. However, serious adverse events can occur in the event of an overdose of NSAIDs. In our study, we have developed a poly(lactic acid-co-glycolic acid) (PLGA) microsphere by emulsifying solvent volatilization for the prolonged slow delivery of celecoxib (CLX). Three groups of celecoxib-poly(lactic acid-co-glycolic acid) microspheres (CLX-PLGA MPs) were prepared with particle sizes of 3.75±1.28 µm, 49.56±17.15 µm, and 94.98±42.53 µm. Meanwhile, related parameters of microspheres in each group were studied: drug loading (DL), encapsulation rate (EE), and slow-release behavior. The DL and EE of the 3 CLX-PLGA MPs did not vary significantly, and subsequently, we selected the second drug loading microspheres with a retardation period of about 70 days for subsequent experiments. Moreover, cellular and animal experiments suggest that the microspheres are biocompatible and can be safely applied to localized trauma tissue. Finally, it is demonstrated that CLX-PLGA MPs have an effect on inhibiting the osteogenic differentiation of bone marrow mesenchymal stem cells and have the potential to inhibit ectopic bone formation of the THO model in Sprague-Dawley rat. Therefore, this study suggests that CLX-PLGA MPs are expected to be applied topically in the early post-traumatic period to prevent the development of THO.

A General Protein Unfolding-Chemical Coupling Strategy for Pure Protein Hydrogels with Mechanically Strong and Multifunctional Properties.

Protein-based hydrogels have attracted great attention due to their excellent biocompatible properties, but often suffer from weak mechanical strength. Conventional strengthening strategies for protein-based hydrogels are to introduce nanoparticles or synthetic polymers for improving their mechanical strength, but often compromise their biocompatibility. Here, a new, general, protein unfolding-chemical coupling (PNC) strategy is developed to fabricate pure protein hydrogels without any additives to achieve both high mechanical strength and excellent cell biocompatibility. This PNC strategy combines thermal-induced protein unfolding/gelation to form a physically-crosslinked network and a -NH2/-COOH coupling reaction to generate a chemicallycrosslinked network. Using bovine serum albumin (BSA) as a globular protein, PNC-BSA hydrogels show macroscopic transparency, high stability, high mechanical properties (compressive/tensile strength of 115/0.43 MPa), fast stiffness/toughness recovery of 85%/91% at room temperature, good fatigue resistance, and low cell cytotoxicity and red blood cell hemolysis. More importantly, the PNC strategy can be not only generally applied to silk fibroin, ovalbumin, and milk albumin protein to form different, high strength protein hydrogels, but also modified with PEDOT/PSS nanoparticles as strain sensors and fluorescent fillers as color sensors. This work demonstrates a new, universal, PNC method to prepare high strength, multi-functional, pure protein hydrogels beyond a few available today.

Carbon-neutral treatment of N, N-dimethylformamide-containing industrial wastewater by anaerobic membrane bioreactor (AnMBR): Bio-energy recovery and CO2 emission reduction.

High-strength industrial wastewater containing approximately 2000 mg/L of N, N-dimethylformamide (DMF) was treated by the anaerobic membrane bioreactor (AnMBR) during a long-term operation with the concept of carbon neutrality in this study. Bio-methane was recovered as bio-energy or bio-resource from DMF-containing wastewater along with the CO2 emission reduction. The results are clear evidence of the feasibility of carbon-neutral treatment of DMF-containing wastewater by the AnMBR. With an effective degradation under the organic loading rate of 6.53 COD kg/m3/d at the HRT of 12 h, the AnMBR completely covered the energy consumption during long-term operation by saving electricity of 4.16 kWh/m3 compared with the conventional activated sludge process. The CO2 emission of the AnMBR was just 1.06 kg/m3, remarkably reducing 1.45 kg/m3 of CO2. The treatment of DMF-containing wastewater by the AnMBR perfectly realized the goal of carbon neutrality, and was considered as an alternative to the conventional activated sludge process.

[Advances of research of hydrophilic/hydrophobic surface effect on cell biologic behaviors in vitro].

Hydrophilicity/hydrophobicity, the same as chemical signals and mechanical stimuli, is an important characteristic of material surface, induces a cascade events of intercelluar proteins and genes, and determines cells biologic behaviors in vitro eventually. In this review, we summarize the available reports to review the methods of hydrophilic/hydrophobic surface modification, and its effects on protein adsorption and cells biologic behaviors.