Molecularly imprinted thermosensitive probe based on fluorescent advanced glycation end products to detect α-dicarbonyl compounds and inhibit pyrraline formation.

A thermal-sensitive molecularly imprinted optosensing probe based on fluorescent advanced glycation end products (AGEs) was prepared by one-pot hydrothermal synthesis. Carbon dots (CDs) derived from fluorescent AGEs were used as the luminous centers, while molecularly imprinted polymers (MIPs) were wrapped outside of the CDs to form specific target recognition sites to highly selectively adsorb the intermediate product of AGEs of 3-deoxyglucosone (3-DG). Thermosensitive N-isopropylacrylamide (NIPAM) was combined with acrylamide (AM) as co-functional monomers, and ethylene glycol dimethacrylate (EGDMA) was chosen as a cross-linker for targeting identification and detection of 3-DG. Under optimal conditions, the fluorescence of MIPs could be gradually quenched with the adsorption of 3-DG on the surface of MIPs in the linear range of 1-160 µg/L, and the detection limit was 0.31 µg/L. The spiked recoveries of MIPs ranged from 82.97 to 109.94% in two milk samples, and the relative standard deviations were all less than 1.8%. In addition, the inhibition rate for non-fluorescent AGEs of pyrraline (PRL) was 23% by adsorbing 3-DG in the simulated milk system of casein and D-glucose, indicating that temperature-responsive MIPs not only could detect the dicarbonyl compound 3-DG quickly and sensitively, but also had an excellent inhibitory effect on AGEs.

Red emissive N-doped carbon dots encapsulated within molecularly imprinted polymers for optosensing of pyrraline in fatty foods.

A novel and facile method was proposed for preparation of red emissive N-doped carbon dots encapsulated within molecularly imprinted polymers (RNCDs@MIPs) using a one-pot room-temperature reverse microemulsion polymerization. RNCDs used citric acid and urea as carbon and nitrogen sources by one-step solvothermal synthesis with the optimum emission of 620 nm. Unique optical properties of RNCDs coupled with high selective MIPs make the RNCDs@MIPs conjugate capable to adsorb specific targets of pyrraline (PRL), such a binding event was then transduced to quench fluorescence response signal of the RNCDs. RNCDs@MIPs for PRL showed linearity from 0.1 to 40 µg/L, with a detection limit of 65 ng/L. The RNCDs@MIPs exhibited a good reproducibility of 4.67% obtained from four times of rebinding for PRL. The optosensing probe was successfully applied to the detection of PRL in fatty foods with the spiked recovery of 85.93-106.96%.

A disulfiram-loaded electrospun poly(vinylidene fluoride) nanofibrous scaffold for cancer treatment.

Disulfiram (DSF), an FDA approved drug for the treatment of alcoholism, has shown its effectiveness against diverse cancer types. Thus, we developed a disulfiram-loaded scaffold using the electrospinning method to enhance the stability of DSF and to facilitate its appropriate distribution to tumor tissues. The drug release profile of the disulfiram-loaded scaffold was examined by high-performance liquid chromatography. We obtained mechanical and morphological characterizations of A549 cells treated with different scaffolds by various techniques to evaluate its antitumor properties. This work revealed that the cells after the treatment with the disulfiram-loaded scaffold exhibited a lower height and a larger elastic modulus compared with the untreated cells and those treated with the neat electrospun fibers. The changes were the indicators of cell apoptosis. Taken collectively, the results indicate that DSF was successfully incorporated into the electrospun fibers, and the disulfiram-loaded scaffold has great potential for inhibiting the regional recurrence of cancer.

Fast detection of tryptamine in meat products with azide-functionalized covalent organic frameworks confined in molecularly imprinted polymers.

Tryptamine is a biogenic amine that affects organoleptic quality through the generation of off-odours in foods. Herein, imine-based covalent organic frameworks (COFs) were synthesized via Schiff base reactions and postmodified with click chemistry to generate azide-functionalized COFs with tunable azide units on the walls. The combination of molecular imprinting with COFs enabled the specific recognition of the targets. The resulting optosensing system (azide-functionalized COFs@MIPs) was used as a sample-to-answer analyser for detecting tryptamine (detection time within 10 min). A linear relationship was observed for the fluorescence response to tryptamine concentrations in the range of 3-120 µg L-1, with a limit of detection of 1.74 µg L-1. The recoveries for spiked samples were satisfactory, with relative standard deviations <9.90%. The optosensing system is a potential tool for the quantitative detection of tryptamine in meat products because of its lower cost, shorter processing time, and simpler processing steps compared to conventional chromatographic techniques.

Facile fabrication of micropattern surfaces with controlled wettability on PDMS-modified fiber membranes for cell patterning.

Various cell culture substrates have been developed for cell patterning to control cell distributions and orientations in tissue engineering, drug screening and regenerative medicine. In this study, a preparation method of modified fiber membranes was applied in the field of cell patterning, and the obtained fiber membranes guided the cell distributions and orientations flexibly. The aligned electrospinning fiber membranes were dip-coated with polydimethylsiloxane (PDMS) to improve the stability of wettability, and then it was treated with oxygen plasma with a photomask to obtain a hydrophilic-hydrophobic surface micropattern. The morphologies, wettabilities and chemical structures of the membranes were analyzed by using a scanning electron microscope (SEM), drop shape analysis instrument, energy dispersive spectrometer (EDS) and Fourier transform infrared (FTIR) spectrometer. The L929 cells were cultured on the obtained membranes to observe the controlled cell distributions and orientations by using a SEM and fluorescence microscope. The results indicate that the treated membranes have the ability to control both cell distributions and orientations simultaneously. This method offers a novel approach to develop cell culture substrates for cell patterning in tissue engineering.