Goldenhar syndrome complicated with subglottic airway stenosis: a case report.

BACKGROUND: Goldenhar syndrome is a congenital disease that involves an absence or underdevelopment of structures that arise from the first and second pharyngeal arches and more or less severe extracranial anomalies. A variety of supraglottic malformations may be observed, including mandibular hypoplasia, mandibular asymmetry and micrognathia. Subglottic airway stenosis (SGS), which can cause difficulties in airway management during the perioperative period, is seldom emphasized in literature descriptions of Goldenhar syndrome, but can be clinically significant. CASE PRESENTATION: An 18-year-old female with a history of Goldenhar syndrome presented for placement of a right mandibular distractor, right retroauricular dilator, and stage I transfer of a prefabricated expanded flap under general anesthesia. During tracheal intubation, the endotracheal tube (ETT) met resistance unexpectantly when attempting to pass through the glottis. Subsequently, we attempted the procedure with a smaller size ETT but again met resistance. With fiberoptic bronchoscope, we found that the whole segment of the trachea and bilateral bronchi were obvious narrow. Given the finding of unexpected severe airway stenosis and the associated risks with proceeding with the surgery, the operation was cancelled. We removed the ETT once the patient was fully awake. CONCLUSIONS: Anesthesiologists should be aware of this clinical finding when evaluating the airway of a patient with Goldenhar syndrome. Coronal and sagittal measurements on computerized tomography (CT) and three-dimensional image reconstruction can be used to evaluate the degree of subglottic airway stenosis and measure the diameter of the trachea.

Three-dimensional printed polylactic acid and hydroxyapatite composite scaffold with urine-derived stem cells as a treatment for bone defects.

Bone defects still pose various challenges in osteology. As one treatment method for bone defects, tissue engineering requires biomaterials with good biocompatibility and stem cells with good differentiation. This study aimed to fabricate a 3D-printed polylactic acid and hydroxyapatite (PLA/HA) composite scaffold with urine-derived stem cells (USCs) to study its therapeutic effect in a rat model of skull defects. USCs were isolated and extracted from the urine of healthy adult males and inoculated onto PLA/HA and PLA scaffolds fabricated by 3D printing technology. A total of 36 skull defect models in eighteen Sprague-Dawley rats were randomly divided into a control group (no treatment of the defects), PLA group (treated with PLA scaffolds with USCs), and PLA/HA group (treated with PLA/HA scaffolds with USCs). The therapeutic efficacy was evaluated by real-time PCR, microcomputed tomography (micro-CT), and immunohistochemistry at 4, 8, and 12 weeks. We found that the PLA/HA scaffold loaded with USCs effectively promoted new bone regeneration in the defect area. CT images showed that in the PLA/HA group, the defect area was almost entirely covered by newly formed bone (coverage of 96.7 ± 1.6%), and the coverage was greater than that in the PLA group (coverage of 74.6 ± 1.9%) at 12 weeks. Histology and immunohistochemical staining showed the highest new bone formation on the PLA/HA scaffolds containing USCs in the defect site at 12 weeks. These findings demonstrate the broad application prospects of PLA/HA scaffolds with USCs in bone tissue engineering. Graphical abstract.

Cemented versus uncemented hemiarthroplasty for the management of femoral neck fractures in the elderly: a meta-analysis and systematic review.

INTRODUCTION: Hemiarthroplasty is commonly used to treat unstable femoral neck fractures in older patients. However, there is no consensus on the use of cement during hemiarthroplasty. Therefore, we performed a systematic review to focus on the outcomes of cemented and uncemented hemiarthroplasty for the treatment of femoral neck fractures in older patients. MATERIALS AND METHODS: Pubmed, Cochrane Central Register of Controlled Trials, and Ovid were searched for studies related comparison of cemented versus uncemented hemiarthroplasty for unstable femoral neck fractures from inception to Jan 20, 2020. The quality of the included randomized controlled trials (RCTs) was assessed using the Cochrane Collaboration tool. The meta-analysis was performed using the RevMan 5.2 software. RESULTS: Eleven RCTs were included in the meta-analysis. Cemented hemiarthroplasty was found to be superior to uncemented arthroplasty with respect to reoperation rate (RR 0.6, 95% CI 0.38-0.96, p = 0.03), complications related to prosthesis (RR 0.39, 95% CI 0.23-0.68, p = 0.0008), residual pain (RR 0.66, 95% CI 0.52-0.83, p = 0.0004), and operation time (MD 8.22, 95% CI 6.30-10.14, p < 0.00001). There were no significant between-group differences with respect to local and general complications, duration of hospital stay, hip function, and mortality. CONCLUSIONS: This meta-analysis showed cemented hemiarthroplasty might be an optimum choice for treating unstable femoral neck fractures in older patients. However, the results of this meta-analysis should be interpreted cautiously owing to some limitations. Further studies are required to provide more robust evidence.

Novel self-setting cements based on tricalcium silicate/(ß-tricalcium phosphate/monocalcium phosphate anhydrous)/hydroxypropyl methylcellulose: From hydration mechanism to biological evaluations.

Despite the clinical success of tricalcium silicate (TCS)-based materials in endodontics, the inferior handling characteristic, poor anti-washout property and slow setting kinetics hindered their wider applications. To solve these problems, an injectable fast-setting TCS/ß-tricalcium phosphate/monocalcium phosphate anhydrous (ß-TCP/MCPA) cement was developed for the first time by incorporation of hydroxypropyl methylcellulose (HPMC) and ß-TCP/MCPA. The physical-chemical characterization (setting time, anti-washout property, injectability, compressive strength, apatite mineralization and sealing property) of TCS/(ß-TCP/MCPA) were conducted. Its hydration mechanism was also investigated. Furthermore, the cytocompatibility and osteogenic/odontogenic differentiation of stem cells isolated from human exfoliated deciduous teeth (SHED) treated with TCS/ß-TCP/MCPA were studied. The results showed that HPMC could provide TCS with good anti-washout ability and injectability but slow hydration process. However, ß-TCP/MCPA effectively enhanced anti-washout characteristics and reduced setting time due to faster hydration kinetics. TCS/(ß-TCP/MCPA) obtained around 90 % of injection rate and high compressive strength whereas excessive additions of ß-TCP/MCPA compromised its injectability and compressive strength. TCS/(ß-TCP/MCPA) can induce apatite deposition and form a tight marginal sealing at the dentin-cement interface. Additionally, TCS/(ß-TCP/MCPA) showed good biocompatibility and promoted osteo/odontogenic differentiation of SHED. In general, our results indicated that TCS/(ß-TCP/MCPA) may be particularly promising as an injectable bioactive cements for endodontic treatment.

Metal-organic framework-based advanced therapeutic tools for antimicrobial applications.

The escalating concern over conventional antibiotic resistance has emphasized the urgency in developing innovative antimicrobial agents. In recent times, metal-organic frameworks (MOFs) have garnered significant attention within the realm of antimicrobial research due to their multifaceted antimicrobial attributes, including the sustained release of intrinsic or exogenous antimicrobial components, chemodynamically catalyzed generation of reactive oxygen species (ROS), and formation of photogenerated ROS. This comprehensive review provides a thorough overview of the synthetic approaches employed in the production of MOF-based materials, elucidating their underlying antimicrobial mechanisms in depth. The focal point lies in elucidating the research advancements across various antimicrobial modalities, encompassing intrinsic component release system, extraneous component release system, auto-catalytical system, and energy conversion system. Additionally, the progress of MOF-based antimicrobial materials in addressing wound infections, osteomyelitis, and periodontitis is meticulously elucidated, culminating in a summary of the challenges and potential opportunities inherent within the realm of antimicrobial applications for MOF-based materials. STATEMENT OF SIGNIFICANCE: Growing concerns about conventional antibiotic resistance emphasized the need for alternative antimicrobial solutions. Metal-organic frameworks (MOFs) have gained significant attention in antimicrobial research due to their diverse attributes like sustained antimicrobial components release, catalytic generation of reactive oxygen species (ROS), and photogenerated ROS. This review covers MOF synthesis and their antimicrobial mechanisms. It explores advancements in intrinsic and extraneous component release, auto-catalysis, and energy conversion systems. The paper also discusses MOF-based materials' progress in addressing wound infections, osteomyelitis, and periodontitis, along with existing challenges and opportunities. Given the lack of related reviews, our findings hold promise for future MOF applications in antibacterial research, making it relevant to your journal's readership.

A review of biomacromolecule-based 3D bioprinting strategies for structure-function integrated repair of skin tissues.

When skin is damaged or affected by diseases, it often undergoes irreversible scar formation, leading to aesthetic concerns and psychological distress for patients. In cases of extensive skin defects, the patient's life can be severely compromised. In recent years, 3D printing technology has emerged as a groundbreaking approach to skin tissue engineering, offering promising solutions to various skin-related conditions. 3D bioprinting technology enables the precise fabrication of structures by programming the spatial arrangement of cells within the skin tissue and subsequently printing skin replacements either in a 3D bioprinter or directly at the site of the defect. This study provides a comprehensive overview of various biopolymer-based inks, with a particular emphasis on chitosan (CS), starch, alginate, agarose, cellulose, and fibronectin, all of which are natural polymers belonging to the category of biomacromolecules. Additionally, it summarizes artificially synthesized polymers capable of enhancing the performance of these biomacromolecule-based bioinks, thereby composing hybrid biopolymer inks aimed at better application in skin tissue engineering endeavors. This review paper examines the recent advancements, characteristics, benefits, and limitations of biological 3D bioprinting techniques for skin tissue engineering. By utilizing bioinks containing seed cells, hydrogels with bioactive factors, and biomaterials, complex structures resembling natural skin can be accurately fabricated in a layer-by-layer manner. The importance of biological scaffolds in promoting skin wound healing and the role of 3D bioprinting in skin tissue regeneration processes is discussed. Additionally, this paper addresses the challenges and constraints associated with current 3D bioprinting technologies for skin tissue and presents future perspectives. These include advancements in bioink formulations, full-thickness skin bioprinting, vascularization strategies, and skin appendages bioprinting.

Tough, high conductivity pectin polysaccharide-based hydrogel for strain sensing and real-time information transmission.

Hydrogels from natural polymers are eco-friendly, biocompatible and adjustable for manufacturing wearable sensors. However, it is still challenging to prepare natural polymer hydrogel sensors with excellent properties (e.g., high conductivity). Here, we developed a physically cross-linked, highly conductive and multifunctional hydrogel (named PPTP) to address this challenge. The natural renewable pectin-based PPTP hydrogel is synthesized by introducing tannic acid (TA), calcium chloride (CaCl2), and sodium chloride (NaCl) into the pectin/polyvinyl alcohol (PVA) dual network structure. The hydrogel exhibits excellent characteristics, including unique tensile strength (2.6155 MPa), high electrical conductivity (7 S m-1), and high sensitivity (GF = 3.75). It is also recyclable, further enhancing its eco-friendly nature. The PPTP hydrogel can be used for monitoring human joint activities, as flexible electrodes for monitoring electrocardiogram (ECG) signals, and touchable screen pen for electronic skin. Moreover, when combined with Morse code and wireless Bluetooth technology, PPTP hydrogels can be used for underwater and land information encryption, and decryption. Our unique PPTP hydrogel offers promising opportunities for medical monitoring, information transfer, and human-computer interaction.

Comparison of dexmedetomidine and a dexmedetomidine-esketamine combination for reducing dental anxiety in preschool children undergoing dental treatment under general anesthesia: A randomized controlled trial.

BACKGROUND: Dental anxiety is a widespread complication occurring in pediatric patients during dental visits and may lead to undesirable complications. Esketamine may be effective in anxiety. OBJECTIVE: The objective of this study was to investigate the effect of premedication with a dexmedetomidine-esketamine combination compared with dexmedetomidine alone on dental anxiety in preschool children undergoing dental treatment under general anesthesia. METHODS: This is a prospective, double-blinded, randomized controlled trial. A total of 84 patients were scheduled for elective outpatient dental caries treatment under general anesthesia. Patients were randomly premedicated with intranasal dexmedetomidine (group D) or intranasal dexmedetomidine-esketamine (group DS). The primary outcome was the level of dental anxiety assessed by the Modified Child Dental Anxiety Scale (MCDAS) at 2 h after surgery. Secondary outcomes included level of dental anxiety at 1 day and 7 days after surgery, the incidence of dental anxiety at 2 h, 1 day, and 7 days after surgery, sedation onset time, overall success of sedation, acceptance of mask induction, postoperative pain intensity, incidence of emergence agitation in PACU, adverse reactions, HR, and SpO2 before premedication (baseline) and at 10, 20, and 30 min after the end of study drug delivery. RESULTS: The dental anxiety in group DS was lower than that in group D at 2 h, 1 day, and 7 days postoperatively (P = 0.04, 0.004, and 0.006, respectively). The incidences of dental anxiety in group DS were lower than those in group D at 2 h (53 % vs 76 %, P = 0.03), 1 day (47 % vs 71 %, P = 0.04), and 7 days (44 % vs 71 %, P = 0.02) after surgery. Group DS had a higher success rate of sedation (P = 0.03) but showed a lower MAS score (P = 0.005) and smoother hemodynamics (P < 0.01) after drug administration than group D. Group DS showed a significantly lower incidence rate of emergence agitation (P = 0.03) and postoperative pain intensity (P = 0.006) than that in group D during the anesthesia recovery time. The occurrence of adverse reactions was similar in both groups (P > 0.05). LIMITATIONS: We did not analyze and correct for the learning effect caused by repeated applications of the MCDAS and MCDAS scores on the 1 day after surgery were obtained by telephone follow-up. CONCLUSIONS: Compared to premedication with dexmedetomidine alone, premedication with intranasal dexmedetomidine combined with esketamine could significantly improve dental anxiety in preschool children undergoing dental treatment under general anesthesia.

Biomimetic Mineralized 3D-Printed Polycaprolactone Scaffold Induced by Self-Adaptive Nanotopology to Accelerate Bone Regeneration.

Three-dimensional (3D)-printed biodegradable polymer scaffolds are at the forefront of personalized constructs for bone tissue engineering. However, it remains challenging to create a biological microenvironment for bone growth. Herein, we developed a novel yet feasible approach to facilitate biomimetic mineralization via self-adaptive nanotopography, which overcomes difficulties in the surface biofunctionalization of 3D-printed polycaprolactone (PCL) scaffolds. The building blocks of self-adaptive nanotopography were PCL lamellae that formed on the 3D-printed PCL scaffold via surface-directed epitaxial crystallization and acted as a linker to nucleate and generate hydroxyapatite crystals. Accordingly, a uniform and robust mineralized layer was immobilized throughout the scaffolds, which strongly bound to the strands and had no effect on the mechanical properties of the scaffolds. In vitro cell culture experiments revealed that the resulting scaffold was biocompatible and enhanced the proliferation and osteogenic differentiation of mouse embryolous osteoblast cells. Furthermore, we demonstrated that the resulting scaffold showed a strong capability to accelerate in vivo bone regeneration using a rabbit bone defect model. This study provides valuable opportunities to enhance the application of 3D-printed scaffolds in bone repair, paving the way for translation to other orthopedic implants.

Design and fabrication of intracellular therapeutic cargo delivery systems based on nanomaterials: current status and future perspectives.

Intracellular cargo delivery, the introduction of small molecules, proteins, and nucleic acids into a specific targeted site in a biological system, is an important strategy for deciphering cell function, directing cell fate, and reprogramming cell behavior. With the advancement of nanotechnology, many researchers use nanoparticles (NPs) to break through biological barriers to achieving efficient targeted delivery in biological systems, bringing a new way to realize efficient targeted drug delivery in biological systems. With a similar size to many biomolecules, NPs possess excellent physical and chemical properties and a certain targeting ability after functional modification on the surface of NPs. Currently, intracellular cargo delivery based on NPs has emerged as an important strategy for genome editing regimens and cell therapy. Although researchers can successfully deliver NPs into biological systems, many of them are delivered very inefficiently and are not specifically targeted. Hence, the development of efficient, target-capable, and safe nanoscale drug delivery systems to deliver therapeutic substances to cells or organs is a major challenge today. In this review, on the basis of describing the research overview and classification of NPs, we focused on the current research status of intracellular cargo delivery based on NPs in biological systems, and discuss the current problems and challenges in the delivery process of NPs in biological systems.

Integrated osteoimmunomodulatory strategies based on designing scaffold surface properties in bone regeneration.

Those who have used traditional biomaterials as bone substitutes have always regarded the immune response as an obstacle leading to implant failure. However, cumulative evidence revealed that blindly minimizing host immune reactions cannot induce successful bone regeneration. With the emergence of the new concept of osteoimmunology, the intimate mutual effects between the skeletal system and the immune system have been gradually recognized, promoting the innovation of biomaterials with osteoimmunomodulatory properties. By tuning the surface properties, biomaterials can precisely manipulate the osteoimmune environment favoring bone regeneration. In this review, we first reviewed the mutual effects between the skeletal system and the immune system to show the importance of immunomodulation on bone regeneration. Subsequently, we summarize the recent developments in surface modification strategies in terms of the surface physicochemical properties and surface coatings and explain how these modification strategies work.

Recent progress in bone-repair strategies in diabetic conditions.

Bone regeneration following trauma, tumor resection, infection, or congenital disease is challenging. Diabetes mellitus (DM) is a metabolic disease characterized by hyperglycemia. It can result in complications affecting multiple systems including the musculoskeletal system. The increased number of diabetes-related fractures poses a great challenge to clinical specialties, particularly orthopedics and dentistry. Various pathological factors underlying DM may directly impair the process of bone regeneration, leading to delayed or even non-union of fractures. This review summarizes the mechanisms by which DM hampers bone regeneration, including immune abnormalities, inflammation, reactive oxygen species (ROS) accumulation, vascular system damage, insulin/insulin-like growth factor (IGF) deficiency, hyperglycemia, and the production of advanced glycation end products (AGEs). Based on published data, it also summarizes bone repair strategies in diabetic conditions, which include immune regulation, inhibition of inflammation, reduction of oxidative stress, promotion of angiogenesis, restoration of stem cell mobilization, and promotion of osteogenic differentiation, in addition to the challenges and future prospects of such approaches.

[Osteoimmunomodulatory effects of inorganic biomaterials in the process of bone repair].

Objective: To review the osteoimmunomodulatory effects and related mechanisms of inorganic biomaterials in the process of bone repair. Methods: A wide range of relevant domestic and foreign literature was reviewed, the characteristics of various inorganic biomaterials in the process of bone repair were summarized, and the osteoimmunomodulatory mechanism in the process of bone repair was discussed. Results: Immune cells play a very important role in the dynamic balance of bone tissue. Inorganic biomaterials can directly regulate the immune cells in the body by changing their surface roughness, surface wettability, and other physical and chemical properties, constructing a suitable immune microenvironment, and then realizing dynamic regulation of bone repair. Conclusion: Inorganic biomaterials are a class of biomaterials that are widely used in bone repair. Fully understanding the role of inorganic biomaterials in immunomodulation during bone repair will help to design novel bone immunomodulatory scaffolds for bone repair.

Enhanced permeate flux by air micro-nano bubbles via reducing apparent viscosity during ultrafiltration process.

Micro-nano bubbles (MNBs) play important roles in the reduction of membrane fouling during membrane separation; however, such improvements are always attributed to the reduced concentration polarization on the surface of membranes and little attention has been paid on the variations of physicochemical properties of the feed caused by MNBs. In this study, the separation efficiencies of the feed containing humic acid (HA), bovine serum albumin (BSA), sodium alginate (SA) or dyes can be improved by MNBs during ultrafiltration, and the normalized fluxes can be maximally increased to 139% and 127% in the dead-end and cross-flow modes, respectively in the treatment of HA solution. We further reveal that the decreased apparent viscosity of the feed in the presence of MNBs is the key factor that enhances the normalized flux during ultrafiltration. This study gives new insight on the importance of MNBs in membrane separation and provides valuable clues for other chemical processes.

Bioavailability and Safety of a New Highly Concentrated Midazolam Nasal Spray Compared to Buccal and Intravenous Midazolam Treatment in Chinese Healthy Volunteers.

INTRODUCTION: Buccal midazolam treatment is licensed in the European Union for prolonged acute convulsive seizures in children and adolescents, but the buccal pathway is often hampered by jaw clenching, hypersalivation, or uncontrolled swallowing. Midazolam formulations that are more secure, reliable, and faster for use are needed in the acute setting. Pharmacokinetics and comparative bioavailability of intranasally administered midazolam and two midazolam intravenous solutions administered buccally or intravenously in healthy adults were evaluated. METHODS: In this phase 1, open-label, randomized, single-dose, three-period, three-sequence crossover study, 12 healthy adults (19-41 years) were randomly assigned to receive 2.5 mg midazolam intranasally; 2.5 mg midazolam intravenously; 2.5 mg midazolam buccally. Blood samples were collected for 10 h post dose to determine pharmacokinetic profiles. Adverse events and vital signs were recorded. RESULTS: Intranasal administration of 2.5 mg midazolam demonstrated a more rapid median time to Cmax compared to buccal administration of midazolam (Tmax, 12.6 min vs. 45 min; Cmax, 38.33 ng/ml vs. 24.97 ng/ml). The antiepileptic effect of intranasal and buccal midazolam treatment lasted less than 4 h and generally did not differ from intravenously administered midazolam. No serious adverse events or deaths were reported, and no treatment-emergent adverse events led to study discontinuation. CONCLUSION: Intranasal administration of midazolam may be a preferable alternative to the currently approve buccal midazolam treatment for prolonged acute convulsive seizures in children and adolescents. TRIAL REGISTRATION: This study is registered at the Chinese Clinical Trial [ http://www.chictr.org.cn ] (ChiCTR2000032595) on 3 May, 2020.

Customized additive manufacturing of porous Ti6Al4V scaffold with micro-topological structures to regulate cell behavior in bone tissue engineering.

Scaffold micro-topological structure plays an important role in the regulation of cell behavior in bone tissue engineering. This paper investigated the effect of 3D printing parameters on the scaffold micro-topological structure and its subsequent cell behaviors. By setting of different 3D printing parameters, i.e., the 3D printing laser power, the scanning interval and the thickness of sliced layers, the highest resolution up to 20 µm can be precisely fabricated. Scaffolds' characterization results indicated that the laser power affected the forming quality of melt tracks, the scanning interval distance determined the size of regularly arranged pores, and the thickness of sliced layers affected the morphological and structural characteristics. By regulating of these printing parameters, customized porous Ti6Al4V scaffold with varied hierarchical micro-topological structure can be obtained. In vitro cell culturing results showed that the regular porous micro-topological structure of scaffolds with the aperture close to cell size was more suitable for cell proliferation and adhesion. The overall distribution of cells on regular porous scaffolds was similar to the orderly arrangement of cultivated crops in the field. The findings suggested that customization of the scaffold provided an effective way to regulate cellular behavior and biological properties.

Chitin-hydroxyapatite-collagen composite scaffolds for bone regeneration.

Bone defect is usually difficult to recover quickly, and bone scaffold transplantation is considered to be an effective method. Biomaterials have a wide range of application prospects in bone tissue repair, and the two key problems are the selection of materials and cells. The object of this study was to discuss the structural characteristics of bone scaffold materials and their effects on bone repair in vivo. The chitin-hydroxyapatite (HAP)-collagen composite scaffolds (CHCS) was prepared with epichlorohydrin (ECH) as crosslinking agent. The structure was characterized and the compressive strength, porosity, water absorbency and stability were investigated. The biocompatibility and osteogenic differentiation of CHCS in vitro were detected, and the effect of defect repair in vivo was evaluated. The results suggested that HAP not only enhanced the compressive strength of CHCS, but also promoted the formation of calcium nodules due to its bone conductivity. Histological staining showed that collagen promoted collagen deposition and new bone formation. X-ray images also indicated that CHCS transplantation accelerated bone repair. Therefore, CHCs has immense potential in bone regeneration.

A Review on Antimicrobial Coatings for Biomaterial Implants and Medical Devices.

Biomaterial implants and medical devices have been utilized extensively in medical treatment with the development of modern medicine, especially in orthopaedics and stomatology. Along with their applications, biomaterial-associated infections (BAIs) have grown to be one of the main postoperative complications. Antimicrobial coating strategies have been reported to effectively inhibit bacterial adhesion and proliferation on implant surface, extending their lifespan. In this review, the most topical antimicrobial coating designs have been chosen from literature studies. Their antimicrobial mechanisms and antimicrobial activity assessments in literature studies have been presented and compared. Based on their active ingredients, antimicrobial coatings are categories into (i) inorganic agents, including Ag, Cu, ZnO, MoS2 and nitride compound; (ii) organic agents including antibiotic, antimicrobial peptides, polymer, essential oils etc. The review has provided various and detailed options of antimicrobial coating designs for consulting according to their specific application. It is noted that the research of antimicrobial coatings is mostly in vitro and in vivo animal models study. It is thus in need for more preclinical or clinical studies, especially finding the direct connection between the utilization of antimicrobial coated implants and the reduction in BAIs incidence. Furthermore, future antimicrobial coating designs shall respect also biocompatibility, functionality, and durability apart from their antimicrobial activity.

Evaluation of multiwalled carbon nanotube cytotoxicity in cultures of human brain microvascular endothelial cells grown on plastic or basement membrane.

There is a growing interest in the use of multiwalled carbon nanotubes (MWCNTs) to treat diseases of the brain. Little is known about the effects of MWCNTs on human brain microvascular endothelial cells (HBMECs), which make up the blood vessels in the brain. In our studies, we evaluate the cytotoxicity of MWCNTs and acid oxidized MWNCTs, with or without a phospholipid-polyethylene glycol coating. We determined the cytotoxic effects of MWCNTs on both tissue-mimicking cultures of HBMECs grown on basement membrane and on monolayer cultures of HBMECs grown on plastic. We also evaluated the effects of MWCNT exposure on the capacity of HBMECs to form rings after plating on basement membrane, a commonly used assay to evaluate angiogenesis. We show that tissue-mimicking cultures of HBMECs are less sensitive to all types of MWCNTs than monolayer cultures of HBMECs. Furthermore, we found that MWCNTs have little impact on the capacity of HBMECs to form rings. Our results indicate that relative cytotoxicity of MWCNTs is significantly affected by the type of cell culture model used for testing, and supports further research into the use of tissue-mimicking endothelial cell culture models to help bridge the gap between in vitro and in vivo toxicology.

From Dual-Mode Triboelectric Nanogenerator to Smart Tactile Sensor: A Multiplexing Design.

Triboelectric nanogenerators (TENGs) can be applied for the next generation of artificial intelligent products, where skin-like tactile sensing advances the ability of robotics to feel and interpret environment. In this paper, a flexible and thin tactile sensor was developed on the basis of dual-mode TENGs. The effective transduction of touch and pressure stimulus into independent and interpretable electrical signals permits the instantaneous sensing of location and pressure with a plane resolution of 2 mm, a high-pressure-sensing sensitivity up to 28 mV·N-1, and a linear pressure detection ranging from 40 to 140 N. Interestingly, this self-powered dual-mode sensor can even interpret contact and hardness of objects by analyzing the shape of the current peak, which makes this low-cost TENG-based sensor promising for applications in touch screens, electronic skins, healthcare, and environmental survey.