A nanocomposite consisting of MnO2 nanoflowers and the conducting polymer PEDOT for highly sensitive amperometric detection of paracetamol.

An electrochemical sensor for paracetamol is described that consists of a glassy carbon electrode (GCE) that was modified with the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with MnO2 nanoflowers. The hydrothermally synthesized MnO2 nanoflowers possess a large surface area and can be doped into PEDOT through electrochemical deposition to form a conducting polymer nanocomposite. The nanoflowers are shown to be uniformly distributed within the nanocomposite as revealed by elemental mapping analysis. The nanocomposite displays excellent catalytic activity toward the electrochemical oxidation of paracetamol. The modified GCE, best operated at a working potential of around 0.37 V (vs. SCE) has a linear response in 0.06 to 435 µM paracetamol concentration range and a very low limit of detection (31 nM at a signal-to-noise ratio of 3). The sensor exhibits excellent reproducibility and stability, and satisfying accuracy for paracetamol detection in pharmaceutical samples. Graphical abstract A highly sensitive electrochemical sensor capable of detecting paracetamol with a limit of detection down to 31 nM was developed based on MnO2 nanoflowers doped conducting polymer PEDOT.

Polydopamine Nanosphere/Gold Nanocluster (Au NC)-Based Nanoplatform for Dual Color Simultaneous Detection of Multiple Tumor-Related MicroRNAs with DNase-I-Assisted Target Recycling Amplification.

A novel fluorescence resonance energy transfer (FRET)-based platform using polydopamine nanospheres (PDANSs) as energy acceptors and dual colored Au NCs as energy donors for simultaneous detection of multiple tumor-related microRNAs with DNase-I-assisted target recycling amplification was developed for the first time. On the basis of monitoring the change of the recovered fluorescence intensity at 445 and 575 nm upon the addition of targets miRNA-21 and let-7a, these two microRNAs (miRNAs) can be simultaneously quantitatively detected, with detection limits of 4.2 and 3.6 pM (3σ) for miRNA-21 and let-7a, which was almost 20 times lower than that without DNase I. Additionally, semiquantitative determination of miRNA-21 and let-7a can also be realized through photovisualization. Most importantly, serums from normal and breast cancer patients can be visually and directly discriminated without any sample pretreatment by confocal microscope experiments, demonstrating promising potential for auxiliary clinical diagnosis.

Zwitterionic peptide anchored to conducting polymer PEDOT for the development of antifouling and ultrasensitive electrochemical DNA sensor.

Zwitterionic peptides were anchored to a conducting polymer of citrate doped poly(3,4-ethylenedioxythiophene) (PEDOT) via the nickel cation coordination, and the obtained peptide modified PEDOT, with excellent antifouling ability and good conductivity, was further used for the immobilization of a DNA probe to construct an electrochemical biosensor for the breast cancer marker BRCA1. The DNA biosensor was highly sensitive (with detection limit of 0.03fM) and selective, and it was able to detect BRCA1 in 5% (v/v) human plasma with satisfying accuracy and low fouling. The marriage of antifouling and biocompatible peptides with conducting polymers opened a new avenue to construct electrochemical biosensors capable of assaying targets in complex biological media with high sensitivity and without biofouling.

Nitrite Oxidation with Copper-Cobalt Nanoparticles on Carbon Nanotubes Doped Conducting Polymer PEDOT Composite.

Copper-cobalt bimetal nanoparticles (Cu-Co) have been electrochemically prepared on glassy carbon electrodes (GCEs), which were electrodeposited with conducting polymer nanocomposites of poly(3,4-ethylenedioxythiophene) (PEDOT) doped with carbon nanotubes (CNTs). Owing to their good conductivity, high mechanical strength, and large surface area, the PEDOT/CNTs composites offered excellent substrates for the electrochemical deposition of Cu-Co nanoparticles. As a result of their nanostructure and the synergic effect between Cu and Co, the Cu-Co/PEDOT/CNTs composites exhibited significantly enhanced catalytic activity towards the electrochemical oxidation of nitrite. Under optimized conditions, the nanocomposite-modified electrodes had a fast response time within 2 s and a linear range from 0.5 to 430 µm for the detection of nitrite, with a detection limit of 60 nm. Moreover, the Cu-Co/PEDOT/CNTs composites were highly stable, and the prepared nitrite sensors could retain more than 96 % of their initial response after 30 days.

Enhanced catalytic and dopamine sensing properties of electrochemically reduced conducting polymer nanocomposite doped with pure graphene oxide.

Significantly enhanced catalytic activity of a nanocomposite composed of conducting polymer poly (3,4-ethylenedioxythiophene) (PEDOT) doped with graphene oxide (GO) was achieved through a simple electrochemical reduction process. The nanocomposite (PEDOT/GO) was electrodeposited on an electrode and followed by electrochemical reduction, and the obtained reduced nanocomposite (PEDOT/RGO) modified electrode exhibited lowered electrochemical impedance and excellent electrocatalytic activity towards the oxidation of dopamine. Based on the excellent catalytic property of PEDOT/RGO, an electrochemical sensor capable of sensitive and selective detection of DA was developed. The fabricated sensor can detect DA in a wide linear range from 0.1 to 175µM, with a detection limit of 39nM, and it is free from common interferences such as uric acid and ascorbic acid.