Adhesive Nanoparticle-in-Microgel System with ROS Scavenging Capability and Hemostatic Activity for Postoperative Adhesion Prevention.

Postoperative adhesion is a noteworthy clinical complication in abdominal surgery due to the existing physical barriers are unsatisfactory and inefficient in preventing its occurrence. In this work, an elaborate nanoparticle-in-microgel system (nMGel) is presented for postoperative adhesion prevention. nMGel is facilely formed by crosslinking manganese dioxide (MnO2) nanoparticles-loaded gelatin microspheres with polydopamine using a modified emulsification-chemical crosslinking method, generating a nano-micron spherical hydrogel. After drying, powdery nMGel with sprayability can perfectly cover irregular wounds and maintains robust tissue adhesiveness even in a wet environment. Additionally, nMGel possesses prominent antioxidant and free radical scavenging activity, which protects cell viability and preserves cell biological functions in an oxidative microenvironment. Furthermore, nMGel displays superior hemostatic property as demonstrated in mouse tail amputation models and liver trauma models. Importantly, nMGel can be conveniently administrated in a mouse cecal defect model to prevent adhesion between the injured cecum and the peritoneum by reducing inflammation, oxidative stress, collagen synthesis, and angiogenesis. Thus, the bioactive nMGel offers a practical and efficient approach for ameliorating postsurgical adhesion.

Joint toxicity of cadmium (II) and microplastic leachates on wheat seed germination and seedling growth.

Cadmium (Cd) pollution ranks first in soils (7.0%) and microplastics usually have a significant adsorption capacity for it, which could pose potential threats to agricultural production and human health. However, the joint toxicity of Cd and microplastics on crop growth remains largely unknown. In this study, the toxic effects of Cd2+ and two kinds of microplastic leachates, polyvinyl chloride (PVC) and low-density polyethylene (LDPE), on wheat seed germination and seedlings' growth were explored under single and combined conditions. The results showed that Cd2+ solution and two kinds of microplastic leachates stimulated the wheat seed germination process but inhibited the germination rate by 0-8.6%. The combined treatments promoted wheat seed germination but inhibited the seedlings' growth to different degrees. Specifically, the combination of 2.0 mg L-1 Cd2+ and 1.0 mgC L-1 PVC promoted both seed germination and seedlings' growth, but they synergistically increased the antioxidant enzyme activity of seedlings. The toxicity of the PVC leachate to wheat seedlings was stronger than LDPE leachate. The addition of Cd2+ could alleviate the toxicity of PVC leachate on seedlings, and reduce the toxicity of LDPE leachate on seedlings under the same concentration class combinations but aggravated stress under different concentration classes, consistent with the effect on seedlings' growth. Overall, Cd2+, PVC, and LDPE leachates have toxic effects on wheat growth, whether treated under single or combined treatments. This study has important implications for the joint toxicity of Cd2+ solution and microplastic leachates in agriculture.

SepM mutation in Streptococcus mutans clinical isolates and related function analysis.

BACKGROUND: Streptococcus mutans (S. mutans) is an important pathogenic bacterium that causes dental caries, while Streptococcus gordonii (S. gordonii) is a non-cariogenic bacterium that inhibits the growth of S. mutans. The SepM protein can promote the inhibitory ability of S. mutans against S. gordonii by cleaving CSP-21 and activating the ComDE two-component system. This study was designed to explore sepM mutation in S. mutans clinical isolates and related function in the regulation of interactions with S. gordonii. METHODS: The S. mutans clinical strains that can inhibit the growth of S. gordonii constitute the inhibitory group. 286 C-serotype S. mutans strains were categorized into S. gordonii inhibitory (n = 114) and non-inhibitory bacteria (n = 172). We detected sanger sequencing of sepM gene, the expression levels of related genes and proteins in clinical isolates, obtained prokaryotic expression and purification of mutated proteins, and analyzed the effect of the target mutations on the binding between SepM and CSP-21. RESULTS: We found that C482T, G533A, and G661A missense mutations were presented at significantly higher frequency in the inhibitory group relative to the non-inhibitory group. There was no significant difference in the expression of the sepM gene between selected clinical isolates harboring the G533A mutation and the control group. The expression levels of SepM, phosphorylated ComD, and ComE in the mutation group were significantly higher than those in the control group. SepM_control and SepM_D221N (G661A at the gene level) were found to contain two residues close to the active center while SepM_G178D (G533A at the gene level) contained three residues close to the active center. At 25 °C and a pH of 5.5, SepM_D221N (G661A) exhibited higher affinity for CSP-21 (KD = 8.25 µM) than did the SepM control (KD = 33.1 µM), and at 25 °C and a pH of 7.5, SepM_G178D (G533A) exhibited higher affinity (KD = 3.02 µM) than the SepM control (KD = 15.9 µM). It means that it is pH dependent. CONCLUSIONS: Our data suggest that increased cleavage of CSP-21 by the the mutant SepM may be a reason for the higher inhibitory effect of S. mutans on S. gordonii .

The fluorescence and colorimetric dual-readout probe for clinical rapid detection of mycophenolic acid by the poly(ethylenimine)/silica-coated CdTe quantum dots.

It is particularly meaningful to therapeutic drug monitoring (TDM) of mycophenolic acid (MPA) for transplant patients to maximize the drug efficacy and minimize the adverse effect. In this study, a novel fluorescence and colorimetric dual-readout probe was put forward to fast and reliable detect MPA. The blue fluorescence of MPA was largely enhanced in the presence of poly (ethylenimine) (PEI), while the red fluorescence of CdTe@SiO2 (silica-coated CdTe quantum dots) provided a reliable reference signal. Hence, combining PEI70,000 and CdTe@SiO2, a fluorescence and colorimetric dual-readout probe could be constructed. For fluorescence measurement of MPA, the linearity was obtained in the MPA concentration range of 0.5-50 µg/mL, with a limit of detection (LOD) of 33 ng/mL. For the visual detection, the fluorescent colorimetric card was established in the MPA concentration from 0.5 to 50 µg/mL corresponding to the fluorescence color from red to violet and then to blue, which could be used for semi-quantification. Furthermore, in the light of the ColorCollect APP by the smartphone, the ratio of blue and red brightness values was linear with the MPA concentration from 1 to 50 µg/mL; thus, quantification of MPA could be realized by APP with the LOD of 83 ng/mL. The developed method was successfully applied to the analysis of MPA in the plasma samples of three patients after oral administration of mycophenolate mofetil, which was the prodrug of MPA. The result was comparable to those obtained by the clinically widely-used enzyme multiplied immunoassay technique. The developed probe was fast, cost-effective and operational convenience, and possessed high potential for TDM of MPA.

A Flow-through Passive Sampler for Microplastics in Air.

Microplastics (MP) in air have attracted increasing attention because of their ubiquitous presence. Accurate atmospheric concentrations of MP are essential for evaluating their capacity for long-range transport and for assessing human inhalation risk. In order to sample airborne MP in locations with limited power supply, we adapted a flow-through passive sampler by placing a glass fiber filter in the inner sampling tube. To test the new sampler's performance under field conditions, two sizes of the flow-through sampler (with diameters of 20 and 10 cm) and a conventionally pumped high-volume air sampler were co-deployed on the Lhasa campus of the Institute of Tibetan Plateau Research. Accurate sampling volumes could be estimated from a relationship between wind speeds recorded outside and inside of the flow-through sampler. Atmospheric concentrations and compositions of MP that compared favorably with those obtained by active sampling indicate that the larger version of the flow-through passive sampler can provide reproducible and quantitative information on atmospheric MP at sites with limited or unreliable power supply. This capability should be useful in large-scale and high-temporal resolution air monitoring networks for MP.

Colletotrichum horii and Colletotrichum fioriniae Causing Anthracnose on Star Anise (Illicium verum) in China.

Star anise (Illicium verum) is an important economic and medical plant widely cultivated in Guangxi province, China. Its fruit can be used as spice and medicine (Wang et al. 2011). In recent years, anthracnose led to a serious decline in the production of star anise in Guangxi. In 2021, a survey conducted in CenwangLaoshan Reserve of Guangxi (24°21'N; 106°27'E) showed that the 2500 ha planting area had disease incidence greater than 80%. The leaf symptoms initially appeared as small spots, then expanded to round spots, finally becoming withered with grayish-white centers, surrounded by dark brown margins. Sometimes, small black acervuli were observed in the later stage. To explore the pathogen, infected leaves were collected and cut into small pieces (about 5 mm2) from the edge of the lesion, disinfected with 75% ethanol for 10 s, 1% NaClO for 1 min, washed with sterilized water and incubated on potato dextrose agar (PDA) plates at 28 °C in the dark. Ten single-spore isolates were obtained from the cultures. After 7 days on PDA at 28 °C, the colonies of 7 isolates were white with abundant aerial hyphae, gray-black with white-gray margins, and the other 3 isolates were light gray on the upper surface, and pink or orange on the underside. Representative isolates BS3-4 and BS3-1 were selected from 3 isolates and 7 isolates, respectively. Conidia of BS3-4 and BS3-1 were both hyaline, cylindrical, aseptate, smooth, apex obtuse, base truncate, and no significant differences (P > 0.05) in size between BS3-1 (13.22 to 5.38 × 3.89 to 1.99 µm) (n = 50) and BS3-4 (12.04 to 4.34 × 3.48 to 1.64 µm) (n = 50). These morphological characteristics were consistent with the Colletotrichum ssp. (Damm et al. 2012). The species identification of BS3-4 and BS3-1 was performed based on DNA sequence analysis. Genomic DNA was extracted as a template. Partial sequences of the rDNA internal transcribed spacer (ITS), actin gene (ACT), ß-tubulin2 (TUB2) and glyceraldehyde-3-phosphate dehydrogenase (GAPDH) were amplified and sequenced (Weir et al. 2012). The sequences were deposited in GenBank (ITS:OQ062642-43; ACT:OQ067614-15; GAPDH:OQ067616-17;TUB2：OQ067618-19). Based on the concatenated sequences of the 4 genes (ITS-ACT- GAPDH -TUB2) of BS3-4 and BS3-1 as well as sequences of other Colletotrichum spp. obtained from GenBank, the Maximum likelihood (ML) tree which produced with IQ-TREE (Minh et al. 2020) revealed that the isolate BS3-1 was Colletotrichum horii, and BS3-4 was Colletotrichum fioriniae. Pathogenicity was confirmed on healthy leaves of 1-year-old star anise seedlings (cultivar Dahong), and the leaves were wounded by sterilized toothpicks, and were inoculated with 10 µl of conidial suspensions of BS3-1 and BS3-4 (106 conidia/ml). Control seedlings were inoculated with sterilized distilled water. Five leaves per plant and 3 plants per treatment were selected. All inoculated seedlings were maintained in the greenhouse (12/12h light/dark, 25 ± 2℃, 90% relative humidity). Wound sites inoculated with BS3-1 and BS3-4 both turned greenish-brown after 2 days and then turned light brown with water-soaked spots. Black (BS3-1) or orange (BS3-4) dots of acervuli developed after 6 days. The lesion diameter of BS3-1 (14.4 mm) was larger than that of BS3-4 (8.1 mm). No symptoms were observed on controls. BS3-1 and BS3-4 were re-isolated from inoculated leaves, fulfilling Koch's postulates. Anthracnose of star anise caused by C.horii has been reported in China (Liao et al. 2017). However, to our knowledge, this is the first report of C.fioriniae infecting star anise in China. Accurate pathogen identification in this study could provide a reference for the control of anthracnose on star anise.

Clinical investigation of gingival papilla recession after orthodontic treatment in adults.

OBJECTIVE: To investigate the incidence, severity, susceptibility sites of gingival papillary recession (GPR) in adults after orthodontic treatment and the clinical impact of tooth extraction on GPR. METHODS: A total of 82 adult patients were recruited and then divided into extraction and non-extraction groups according to whether the orthodontic teeth were extracted (teeth that needed to be extracted when performing orthodontic treatment). The gingival conditions of the two groups of patients before and after treatment were recorded using intraoral photos, and the incidence, severity and predilection sites of GPR after correction were investigated. RESULTS: The results indicated that GPR occurred in 29 patients after correction, with an incidence rate of 35.4%. A total of 1648 gingival papillae were recorded among the 82 patients after correction, of which 67 exhibited atrophy, with an incidence of 4.1%. All occurrences of GPR were classified as papilla presence index 2 (PPI 2) (mild). The condition is most likely to occur in the anterior tooth area, especially in the lower incisor area. The results indicated that the incidence of GPR was substantially higher in the extraction group than in the non-extraction group, with the difference statistically significant. CONCLUSION: Following orthodontic treatment, adult patients will have a certain proportion of mild GPR, which is more common in the anterior tooth area, especially the lower anterior tooth area.

Diagnostic performance of magnetic resonance imaging for degenerative temporomandibular joint disease.

BACKGROUND: Degenerative joint disease (DJD) of the temporomandibular joint (TMJ) is an important type of temporomandibular disorders (TMDs) potentially leading to orofacial pain and jaw dysfunction. Magnetic resonance imaging (MRI) is important in TMD diagnosis; however, its diagnostic ability for DJD remains unknown. OBJECTIVE: To explore the utility of MRI in diagnosing DJD according to the latest diagnostic criteria for TMD and detecting condylar bone abnormalities and their severity. METHODS: Overall, 122 participants were examined using cone-beam computed tomography (CBCT) and MRI. The sensitivity, specificity and accuracy of MRI for detecting DJD and different types of TMJ condylar bone abnormalities were calculated (considering CBCT as gold standard); in addition, we tested MRI and CBCT's consistency in scoring five types of condylar bone abnormalities. RESULTS: The sensitivity and specificity of MRI for DJD were 95.3% and 43.1%, respectively. The MRI sensitivities for condylar flattening, erosion, osteophytes, sclerosis and cysts were 98.6%, 96.2%, 79.4%, 50%, and 79.2% (specificity, 53.6%, 48.3%, 81.6%, 83.3%, and 88.2%, respectively), respectively. The consistency between MRI and CBCT in assessing the severity of condylar bone abnormalities was fair-to-moderate (kappa coefficient: 0.278-0.491). The inter-observer consistency for CBCT was good, whereas for MRI, it was relatively poor. CONCLUSION: MRI can detect DJD and condylar bone abnormalities. However, MRI could not efficiently detect the severity of condylar bone abnormalities.

Rapid urbanization affects microplastic communities in lake sediments: A case study of Lake Aha in southwest China.

Effective management of pollutants in urban environments is crucial for achieving sustainable cities. Microplastics, as an emerging pollutant widely present in contemporary environments, have received widespread attention in recent years. However, limited studies have reported the impact of rapid urbanization on regional microplastics. In this study, the abundance and composition of microplastic communities in the sediments of Lake Aha were analyzed using a "microplastic community" and slicing the sediments at 5 cm intervals. Results showed that microplastic abundance of sediments in Lake Aha was relatively high (up to 1700 items/kg) and decreased with increasing depth, with the highest abundance found in the surface layer (0-5 cm, 1090 ± 474 items/kg). Hierarchical cluster analysis (HCA), principal component analysis (PCA), and analysis of similarities (ANOSIM) revealed that the different sediment layers could be classified into high and low urbanization level groups based on the composition of microplastic communities. Linear discriminant analysis effect size (LEfSe) indicated that agricultural input was the main source of microplastic pollution during low urbanization levels, characterized by low abundance, large particle size, and high fiber proportion, while urban activities dominated during high urbanization levels, with high abundance, small particle size, high proportion of Polyethylene terephthalate (PET), fragments, and granules, and colorful microplastics. This study clarifies the impact of urbanization on the abundance and composition of microplastics in lake sediments, which has implications for more effective management and control of microplastic pollution in regions undergoing rapid urbanization.

BMP4 Regulates EMT to be Involved in non-Syndromic Cleft lip With or Without Palate.

OBJECTIVE: In the previous study, we identified bone morphogenetic protein 4 (BMP4) responsible for non-syndromic cleft lip with or without cleft palate (NSCL/P). We aimed to elucidate the effects and mechanisms of BMP4 on epithelial-mesenchymal transition (EMT) through Smad1 signaling pathway to be involved in NSCL/P. METHODS: The human oral epidermoid carcinoma cells (KBs) were transfected with plasmids or small interfering RNA (siRNA) to build the models. The migration of the cells was evaluated by transwell assay. Western blotting and quantitative real-time reverse transcription-polymerase chain reaction (qRT-PCR) were used to detect the expressions of BMP4, E-cadherin, N-cadherin, EMT-related transcription factors snal1 and snal2, matrix metalloproteinase 2 (MMP2), MMP9, Smad1, and phosphorylated Smad1. RESULTS: In the overexpression group, the migration number of cells was increased significantly. The protein expression of E-cadherin was decreased significantly, while the protein expression level of the N-cadherin was increased significantly. The protein and mRNA expressions of MMP2, MMP9, snal1, and snal2 were significantly higher. The expression level of Smad1 was not significantly changed, while the phosphorylation of Smad1 was significantly increased. In the BMP4-siRNA group, the migrating number cells was significantly decreased. The protein expression of E-cadherin was increased significantly, while the expression of N-cadherin was significantly decreased. The protein and mRNA expressions of MMP2, MMP9, snal1, and snal2 were significantly lower than that of the control group. The expressions of Smad1 and phosphorylation of Smad1 were not significantly changed. CONCLUSIONS: BMP4 enhances cell migration and promotes cell EMT through Smad1 signaling pathway. Abnormal BMP4 mediates migration and EMT through other relevant signaling pathways resulting in NSCL/P. The study provides new insight into the mechanisms of NSCL/P associated with BMP4.n.

Augmented corticotomy-assisted presurgical orthodontic treatment to prevent alveolar bone loss in patients with skeletal Class III malocclusion.

INTRODUCTION: The objective of this study was to explore the effect of augmented corticotomy (AC) on anterior alveolar bone morphology in presurgical orthodontic treatment for skeletal Class III malocclusion. METHODS: Thirty-six surgical patients with skeletal Class III malocclusion with high-angle were included: 18 (AC group) accepted AC surgery during presurgical orthodontic treatment, and 18 (control group) accepted traditional presurgical orthodontic treatment. Cone-beam computed tomography scans were obtained before treatment (T0) and after presurgical orthodontic treatment (T1). The alveolar bone morphology, root length, dehiscence, and movement of mandibular central incisors were measured by cone-beam computed tomography using Dolphin software. Statistical analyses were performed with independent-sample t tests, paired t tests, and multiple linear regression. RESULTS: After presurgical orthodontic treatment, the whole alveolar bone thickness at each level, alveolar bone area, and alveolar bone height decreased significantly in the control group but increased or remained unchanged in the AC group. In the AC group, the lower the labial alveolar bone height at T0 was, the greater the increase after T1; the change in alveolar bone thickness was related to ΔL1-MP and sex. At T0, the incidences of dehiscence were similar in the 2 groups, ranging from 11.11% to 16.67%. At T1, the labial and lingual incidences of dehiscence in the AC group were 0% and 27.78%, compared with 55.56% and 66.67% in the control group. CONCLUSIONS: During presurgical orthodontic treatment, AC is effective in preventing alveolar bone resorption and dehiscence without additional root resorption. AC can be recommended for high-angle skeletal Class III patients with thin alveolar bone around anterior teeth during presurgical orthodontic treatment.

Exploration of key factors in Gingival Crevicular fluids from patients undergoing Periodontally Accelerated Osteogenic Orthodontics (PAOO) using proteome analysis.

BACKGROUND: The aims of this study are to explore protein changes in gingival crevicular fluid at different time points after PAOO by proteomics method and to select significant bone metabolization-related biomarkers. METHODS: This study included 10 adult patients experiencing PAOO. After orthodontic alignment and leveling, the maxillary anterior teeth were treated with PAOO, which is classified as the experimental area. The traditional orthodontic treatment was performed in the mandibular dentition as the control. Gingival crevicular fluid samples were collected at the following time points: the day before the PAOO (T1) and at 1 week, 2 weeks, 1 month, 2 months and 6 months after PAOO (T2, T3, T4, T5 and T6, respectively). The label-free quantitative proteomic assay was used to evaluate the gingival crevicular fluid in PAOO and control areas at time point T1, T2, and T4. Bioinformatics analysis was carried out to categorize proteins based on biological processes, cellular component and molecular function, which is in compliance with gene ontology (GO) standards. The changes of proteins were confirmed by ELISA. RESULTS: A total of 134 proteins were selected by keywords (Osteoblast markers, Osteoclast markers, Osteoclastogenesis regulating genes and inflammatory marker). 33 of them were statistically different between groups, and 12 were related to bone metabolism. 5 proteins selected by label-free quantitative proteomics were KLF10, SYT7, APOA1, FBN1 and NOTCH1. KLF10 decreased after PAOO, hitting a trough at T4, and then leveled off. SYT7 increased after PAOO, reaching a peak at T3, and then stabilized until T6. APOA1 ascended to a peak at T4 after PAOO, and then remained stable until T6. The FBN1 rose after PAOO, reaching a peak at T4, and then went down slowly. NOTCH1 ascended rapidly in the first two weeks after PAOO and continued its slow growth trend. CONCLUSION: In this study, protein changes in gingival crevicular fluid were detected by proteomics method, and significant bone metabolization-related proteins were selected. It is speculated that APOA1, FBN1, NOTCH1, SYT7 and KLF10 played key roles in regulating bone metabolic balance and in reversible osteopenia after PAOO, which might be involved in the accelerated tooth movement. TRIAL REGISTRATION: This study was registered in the Chinese Clinical Trial Registry (Clinical trial registration number: ChiCTR-ONRC-13,004,129) (26/04/2013).

Ratiometric Semiconducting Polymer Nanoparticle for Reliable Photoacoustic Imaging of Pneumonia-Induced Vulnerable Atherosclerotic Plaque in Vivo.

Acute pneumonia can greatly increase the vulnerable risk of atherosclerotic plaque and contribute to the mortality of cardiovascular disease. To accurately assess the rupture risk caused by acute pneumonia, we developed a novel kind of ratiometric semiconducting polymer nanoparticle (RSPN) for photoacoustic imaging of vulnerable plaque in apolipoprotein E-deficient mice complicated with pneumonia. Specifically, RSPN can react with O2•- and exhibit the enhanced photoacoustic signals at about 690 nm, while 800 nm is regarded as an internal photoacoustic reference. As a result, RSPN can provide reliable determination of O2•- within aortic atherosclerosis by analyzing the ratios of photoacoustic signals, which can successfully reflect the oxidative stress level in vulnerable plaque. Therefore, RSPN enable to specifically distinguish plaque-bearing mice and plaque-bearing mice complicated with pneumonia from healthy mice, which provides a promising tool to predict the vulnerability of plaque for reducing the mortality of atherosclerotic-induced cardiovascular disease.

Effect of platelet-rich plasma injection combined with individualised comprehensive physical therapy on temporomandibular joint osteoarthritis: A prospective cohort study.

BACKGROUND: The effectiveness of platelet-rich plasma (PRP) injection combined with physical therapy for the treatment of temporomandibular joint osteoarthritis (TMJ-OA) has not been studied. OBJECTIVES: To assess the effectiveness of PRP injection combined with individualised comprehensive physical therapy for the treatment of TMJ-OA. METHODS: This prospective cohort study included 40 patients with TMJ-OA who received PRP injection or PRP injection combined with individualised comprehensive physical therapy. Pain intensity, maximum mouth opening, temporomandibular joint sounds, and the Jaw Functional Limitation Scale (JFLS) scores and imaging findings were compared before treatment and during follow-up. RESULTS: The pain intensity, maximum mouth opening, and temporomandibular joint sounds of the two groups significantly improved with an increase in treatment time (p < .05). The pain improvement in the combined treatment group was greater than that in the PRP injection group at 3 and 6 months (p < .05). The improvement of mouth opening was better in the combined treatment group, whereas the improvement of joint sounds was better in the PRP injection group. The improvement in JFLS scores in the combined treatment group was greater than that in the PRP injection group at 6 months (p < .05). The imaging improvement rates of the two groups were similar. CONCLUSIONS: Platelet-rich plasma injection can significantly improve pain, mouth opening, abnormal joint sound, and mandibular function in patients with TMJ-OA and has good repair effect on condylar bone defects. PRP injection combined with individualised comprehensive physical therapy can effectively control the medium- and long-term pain of patients.

Characterization of Abscisic Acid and Ethylene in Regulating the White Blush in Fresh-Cut Carrots.

The surface of fresh-cut carrots is apt to white blush, however the physiological and molecular mechanism for this process is not yet fully understood. In this study, exogenous abscisic acid (ABA) and ethylene separately promoted and inhibited the white-blush formation after three days after treatment, respectively. Metabolome analysis found that white-blush components mainly consist of p-hydroxyphenyl lignin and guaiacyl lignin. Transcriptome analysis found an increase in the whiteness values was consistent with the higher expression of genes encoding O-methyltransferase, trans-anol O-methyltransferase, bergaptol O-methyltransferase, caffeic acid 3-O-methyltransferase, phenylalanine ammonia-lyase, and ferulate-5-hydroxylase, together with the lower expression of genes encoding cinnamic acid 4-hydroxylase caffeoyl-CoA O-methyltransferase and 5-O-(4-coumaroyl)-D-quinate 3'-monooxygenase. In conclusion, ABA plays an important role in lignin biosynthesis essential to the formation of white blush in fresh-cut carrots. This is the first report that uncovers the physiological and molecular causes of white blush in fresh-cut carrots, providing a basis for white-blush control in fresh-cut carrots.

A novel three-dimensional quantitative assessment method for abnormal root morphology of the maxillary premolars in vivo on cone-beam computed tomography.

BACKGROUND: Previous studies have described and recorded abnormal root morphology; however, most of these studies were based on two-dimensional periapical or panoramic radiographs, and only a few studies have quantified it. We aimed to combine two-dimensional periapical radiographs and three-dimensional cone-beam computed tomography (CBCT) to conduct qualitative judgments and quantitative analyses of normal and conical roots, and explore the clinical diagnostic method of normal and conical roots based on intraoral radiographs and CBCT. METHODS: The conical root was identified visually on periapical radiographs as the clinical gold standard. All teeth were divided into the cone-rooted teeth (CRT) or normal-rooted teeth (NRT) groups. Furthermore, differences in root length (RL), root surface area (RSA), and root volume (RV) of conical and normal roots in the maxillary premolars on CBCT were compared. Receiver operator characteristic curves were generated, and the area under the curve (AUC) and cut-off values were calculated to evaluate the diagnostic value of RV, RSA, RV/RL, and RSA/RL. RESULTS: The RSAs of NRT and CRT were 236.88 ± 27.93 mm2 and 207.98 ± 27.80 mm2, respectively (P = 0.000). The mean RV in the CRT group was lower than that in the NRT group, and the difference was statistically significant (253.40 ± 41.98 mm3 vs. 316.93 ± 49.89 mm3, P = 0.000). The RSA and RV of conical roots in single root premolars were 12.29% and 19.33% less than those of normal roots, respectively. The AUC values of RSA/RL and RV/RL were 0.87 and 0.89, respectively, and the best cut-off values were 19.61 for RSA/RL (if RSA/RL was < 19.61, the teeth were considered CRT) and 24.05 for RV/RL (if RV/RL was < 24.05, the teeth were considered CRT). CONCLUSIONS: CBCT has significant diagnostic value in the clinical evaluation of conical roots. RSA/RL and RV/RL were the best parameters with the largest AUC and high sensitivity and specificity.

Periodontal soft tissue increase induced by periodontally accelerated osteogenic orthodontics surgery.

OBJECTIVES: To quantitatively assess periodontal soft tissue changes, including gingival thickness and keratinized gingiva width after periodontally accelerated osteogenic orthodontics (PAOO) surgery by digital measurements.  METHODS: This study enrolled 15 maxillaries with 89 anterior teeth and 16 mandibles with 94 anterior teeth from Chinese adult patients with skeletal Angle Class III malocclusion for whom PAOO surgery was proposed during orthodontic treatment. Intraoral scanning and cone beam computed tomography (CBCT) examinations were performed before PAOO surgery and 6 months after the surgery. Keratinized gingiva width was measured on the digital model acquired by intraoral scanning. The gingival thickness was measured using a digital three-dimensional (3D) model based on the combination of digital intraoral scanning and CBCT data. RESULTS: The mean gingival thickness before surgery was 0.91 ± 0.32 mm and 1.21 ± 0.38 mm at 6-month after PAOO. Patients showed periodontal soft tissue increase with a mean gingival tissue gain of 0.30 ± 0.33 mm. At 1 mm, 2 and 3 mm apical to cemento-enamel junction (CEJ) levels, the gingival thickness increase of the mandible was higher than that of the maxilla (0.38 ± 0.30 mm vs. 0.24 ± 0.31 mm, 0.43 ± 0.35 mm vs. 0.26 ± 0.41 mm, 0.36 ± 0.27 vs. 0.25 ± 0.32 mm, respectively, all P < 0.05). Moreover, the sites of gingival thickness ≤ 1 mm before surgery showed more tissue gain than the sites > 1 mm (0.36 ± 0.32 mm vs. 0.18 ± 0.31 mm, P < 0.001). The mean keratinized gingiva width at T0 was 3.88 ± 1.22 mm, and increased 1.05 ± 1.24 mm 6 months after PAOO surgery. Moreover, a digital 3D model for gingival thickness measurement based on the combination of digital intraoral scanning and CBCT displayed high reliability and accuracy with an intra-class correlation coefficient (ICC) of 0.897. CONCLUSION: PAOO could improve an insufficient quantity of periodontal soft and hard tissues in patients with skeletal Angle Class III malocclusion, including the gingival thickness and keratinized gingiva width. A digital 3D model based on the combination of digital intraoral scanning and CBCT data could provide a new digital measurement of gingival thickness with high accuracy and reliability.

Polymorphisms in the DC-SIGN gene and their association with the severity of hand, foot, and mouth disease caused by enterovirus 71.

Severe hand, foot, and mouth disease (HFMD) caused by enterovirus 71 (EV71) infection is associated with high mortality and disability. DC-SIGN, a receptor for EV71, is widely distributed in dendritic cells and may influence the severity of HFMD caused by EV71 infection. This observational study attempts to explore whether single-nucleotide polymorphisms (SNPs) in DC-SIGN are related to the severity of EV71-associated HFMD. Based on linkage disequilibrium and functional predictions, two DC-SIGN SNPs were selected and tested to explore their potential association with the severity of HFMD caused by EV71 infection. Two hundred sixteen Han Chinese children with HFMD caused by EV71 were enrolled to obtain clinical data, including the severity of HFMD, serum DC-SIGN levels, and DC-SIGN SNPs. We found a significant association between the rs7248637 polymorphism (A vs. G: OR = 0.644, 95% CI = 0.515-0.806) and the severity of HFMD caused by EV71 infection, as well as the rs4804800 polymorphism (A vs. G: OR = 1.539, 95% CI =1.229-1.928). These two DC-SIGN SNPs may have an effect on the severity of HFMD caused by EV71 infection.

Microplastics in a Remote Lake Basin of the Tibetan Plateau: Impacts of Atmospheric Transport and Glacial Melting.

Plastic pollution is fast becoming one of the most pressing global issues that we currently face. Remote areas, such as the polar regions and the Tibetan Plateau, are now also exposed to microplastic contamination. However, with the impact of global warming, the transport of microplastics within the glacier-lake basins in such regions remains unclear. In this work, the Nam Co Basin in the Tibetan Plateau was selected to study the characteristics of microplastics in the rain fallout, lake water, glacial runoff, and non-glacial runoff. Fiber and films were the most common microplastic morphologies in all water samples; a higher proportion (37%) of light-weighing polypropylene and small-size (50-300 µm, ∼30%) microplastics were found in the glacial runoff. Air mass trajectory analysis showed that microplastics could be transported through the atmosphere over a distance of up to 800 km. For microplastic loading in lakes, the atmospheric fallout was estimated to be 3.3 tons during the monsoon season, whereas the contributions of glacial runoff (∼41 kg) and non-glacial runoff (∼522 kg) were relatively low. For the microplastic loading in glaciers, the atmospheric deposition was ∼500 kg/yr, and the output caused by glacial melting only accounted 8% of the total atmospheric input. All these results suggested that the dominant pathway through which microplastics enter remote mountainous lake basins is atmospheric deposition, and once deposited on glaciers, microplastics will be stored for a long time. This work provides quantitative evidence elucidating the fate of microplastics in alpine lake environments.

Morphometric evaluation of the alveolar bone around central incisors during surgical orthodontic treatment of high-angle skeletal class III malocclusion.

OBJECTIVES: To evaluate morphometric characteristics of alveolar bone around the incisors of high-angle skeletal class III patients receiving surgical orthodontic treatment. SETTING AND SAMPLE POPULATION: Thirty high-angle skeletal class III patients (mean age, 20.94 ± 3.25 years) underwent cone-beam computed tomography before treatment (T0), after pre-surgical orthodontic treatment (T1) and after treatment (T2). MATERIALS AND METHODS: The vertical bone level (VBL), alveolar bone thickness (ABT), alveolar bone area (ABA) and position of upper and lower central incisors (UCIs and LCIs) were evaluated. The ABT included five levels (4, 6, 8 mm from the cemento-enamel junction, midroot and root apex level). One-way repeated measures ANOVA with Bonferroni's multiple-comparison test and matched t test was performed to compare variables. RESULTS: Before treatment, the average labial ABT was approximately 1 mm in UCIs and 0.38 ~ 0.79 mm in LCIs, and the VBL of the LCIs was over 2 mm. After treatment, the VBL increased by 2.19 ± 1.96 mm (P < .001) on the lingual side of UCIs and 2.78 ± 2.29 mm and 3.09 ± 2.52 mm on the labial and lingual sides of LCIs, respectively (all P < .001). ABT at every level decreased significantly, decreasing by 1.66 ± 1.93 mm at the 8 mm level of UCIs and 1.06 ± 1.01 mm at the apex of LCIs (P < .001). The lingual ABA of UCIs and LCIs decreased by over 50% (P < .001). CONCLUSIONS: In high-angle skeletal class III patients, the condition of alveolar bone around UCIs and LCIs was extremely poor before treatment. Further alveolar bone resorption occurred during surgical orthodontic treatment. More attention should be paid to the movement of anterior teeth in cases of severe alveolar bone loss.