Hybrid Nanofibrous Composites with Anisotropic Mechanics and Architecture for Tendon/Ligament Repair and Regeneration.

Rupture of tendons and ligaments (T/L) is a major clinical challenge due to T/L possess anisotropic mechanical properties and hierarchical structures. Here, to imitate these characteristics, an approach is presented by fabricating hybrid nanofibrous composites. First, hybrid fiber-reinforced yarns are fabricated via successively electrospinning poly(L-lactide-co-ε-caprolactone) (PLCL) and gelatin (Ge) nanofibers onto polyethylene terephthalate (PET) fibers to improve biodurability and biocompatibility. Then, by comparing different manufacturing methods, the knitted structure succeeds in simulating anisotropic mechanical properties, even being stronger than natural ligaments, and possessing comfort compliance superior to clinically used ligament advanced reinforcement system (LARS) ligament. Moreover, after inoculation with tendon-derived stem cells and transplantation in vivo, hybrid nanofibrous composites are integrated with native tendons to guide surrounding tissue ingrowth due to the highly interconnected and porous structure. The knitted hybrid nanofibrous composites are also ligamentized and remodeled in vivo to promote tendon regeneration. Specifically, after the use of optimized anisotropic hybrid nanofibrous composites to repair tendon, the deposition of tendon-associated extracellular matrix proteins is more significant. Thus, this study indicates a strategy of manufacturing anisotropic hybrid nanofibrous composites with superior mechanical properties and good histocompatibility for clinical reconstruction.

Prediction of Collision Cross-Section Values for Extractables and Leachables from Plastic Products.

The use of ion mobility separation (IMS) in conjunction with high-resolution mass spectrometry has proved to be a reliable and useful technique for the characterization of small molecules from plastic products. Collision cross-section (CCS) values derived from IMS can be used as a structural descriptor to aid compound identification. One limitation of the application of IMS to the identification of chemicals from plastics is the lack of published empirical CCS values. As such, machine learning techniques can provide an alternative approach by generating predicted CCS values. Herein, experimental CCS values for over a thousand chemicals associated with plastics were collected from the literature and used to develop an accurate CCS prediction model for extractables and leachables from plastic products. The effect of different molecular descriptors and machine learning algorithms on the model performance were assessed. A support vector machine (SVM) model, based on Chemistry Development Kit (CDK) descriptors, provided the most accurate prediction with 93.3% of CCS values for [M + H]+ adducts and 95.0% of CCS values for [M + Na]+ adducts in testing sets predicted with <5% error. Median relative errors for the CCS values of the [M + H]+ and [M + Na]+ adducts were 1.42 and 1.76%, respectively. Subsequently, CCS values for the compounds in the Chemicals associated with Plastic Packaging Database and the Food Contact Chemicals Database were predicted using the SVM model developed herein. These values were integrated in our structural elucidation workflow and applied to the identification of plastic-related chemicals in river water. False positives were reduced, and the identification confidence level was improved by the incorporation of predicted CCS values in the suspect screening workflow.

Rotating night shift work and non-alcoholic fatty liver disease among steelworkers in China: a cross-sectional survey.

OBJECTIVES: In a 24/7 society, the negative metabolic effects of rotating night shift work have been increasingly explored. This study aimed to examine the association between rotating night shift work and non-alcoholic fatty liver disease (NAFLD) in steelworkers. METHODS: A total of 6881 subjects was included in this study. Different exposure metrics of night shift work including current shift status, duration of night shifts (years), cumulative number of night shifts (nights), cumulative length of night shifts (hours), average frequency of night shifts (nights/month) and average length of night shifts (hours/night) were used to examine the relationship between night shift work and NAFLD. RESULTS: Current night shift workers had elevated odds of NAFLD (OR, 1.23, 95% CI 1.02 to 1.48) compared with those who never worked night shifts after adjustment for potential confounders. Duration of night shifts, cumulative number of night shifts and cumulative length of night shifts were positively associated with NAFLD. Both the average frequency of night shifts (>7 nights/month vs ≤7 nights/month: OR, 1.24, 95% CI 1.06 to 1.45) and average length of night shifts (>8 hours/night vs ≤8 hours/night: OR, 1.27, 95% CI 1.08 to 1.51) were independently associated with overall NAFLD after mutually adjusting for the duration of night shifts and other potential confounders among night shift workers. No significant association was found in female workers between different exposure metrics of night shift work and NAFLD. CONCLUSIONS: Rotating night shift work is associated with elevated odds of NAFLD in male steelworkers.

Electrospun nitrocellulose membrane for immunochromatographic test strip with high sensitivity.

The main goal of this work is to develop an economical, portable, disposable, and reliable point of care paper biosensor based on visualization, which can be used to detect viruses, bacteria, and proteins. However, the sensitivity of immunochromatography test (ICT) strips based on nitrocellulose to target detection has always been a problem. Here, we use an electrospun nitrocellulose (ENC) fiber membrane instead of traditional nitrocellulose fiber membrane to construct ICT strips for early pregnancy detection. By proper selection of the diameter of the ENC fiber to adjust the pore size, porosity, and morphology of the membrane, ICT strips with low flow rate and high protein loading were obtained. Based on these properties, a convenient and sensitive method for the colorimetric determination of human chorionic gonadotropin was developed. Under the optimal conditions, the detection limit of ICT based on ENC membrane is 10 mIU mL-1 (S/N = 3), the linear detection range is 5-1000 mIU mL-1, and the linear relationship is Y = 0.0434 X - 0.0136 (R2 = 0.9802). In addition, the test strip has good specificity and stability, and will not produce false-positive results. Graphical abstract.

Anti-inflammatory effects of isorhamnetin on LPS-stimulated human gingival fibroblasts by activating Nrf2 signaling pathway.

Periodontitis is a highly prevalent infective and inflammatory disease with an adverse impact on systemic health. Isorhamnetin, a flavonoid mainly isolated from Hippophae fhamnoides L. fruit, has been reported to have anti-inflammatory effect. This study aimed to investigate the anti-inflammatory effects and mechanism of isorhamnetin on lipopolysaccharide (LPS)-induced inflammatory response in human gingival fibroblasts (HGFs). The production of inflammatory mediators and the expression of proteins were measured by ELISA and western blot analysis. The results demonstrated that isorhamnetin attenuated LPS-induced release of PGE2, NO, IL-6, and IL-8 in HGFs. Isorhamnetin also inhibited LPS-induced NF-κB activation. The expression of Nrf2 and HO-1 were up-regulated by treatment of isorhamnetin. Furthermore, knockdown of Nrf2 by siRNA reversed the anti-inflammatory effects of isorhamnetin. In conclusion, these results suggested that isorhamnetin inhibited LPS-induced inflammation in HGFs by activating Nrf2 signaling pathway.

The relationship between vitamin D receptor gene polymorphism and deciduous tooth decay in Chinese children.

BACKGROUND: In the present study, we explored the link between vitamin D receptor (VDR) BsmI, TaqI, ApaI and FokI gene polymorphisms with deciduous tooth decay in Chinese children. METHODS: Our study included 380 Chinese children aged 4-7 years, whose DNA sample was collected from the buccal mucosa. VDR gene polymorphisms was determined by PCR-RFLP. RESULTS: The adjusted logistic regression analysis demonstrated that BsmI containing the Bb genotype was linked with the increased risk of deciduous tooth decay (OR = 1.856, 95% CI = [1.184, 2.908], p = 0.007). However, VDR polymorphisms ApaI, TaqI and FokI were not associated with deciduous tooth decay (ApaI: OR = 0.839, 95% CI = [0.614, 1.145], p = 0.268; TaqI: OR = 1.150, 95% CI = [0.495, 2.672], p = 0.744; FokI: OR = 0.856, 95% CI = [0.616, 1.191], p = 0.356). CONCLUSIONS: Our results showed that VDR BsmI polymorphism was associated with the risk of deciduous tooth decay in Chinese children aged 4-7 years. However, the specific mechanism remains to further verify through experiment.

Biomimetic superhydrophobic surfaces by combining mussel-inspired adhesion with lotus-inspired coating.

Superhydrophobic surfaces on PET textiles were fabricated by combined bioinspiration from the strong adhesion of marine mussels and the two-scale structure of lotus leaves under mild conditions. Dopamine can spontaneously polymerize in alkaline aqueous solution to form a thin adhesive layer of polydopamine (PDA) wrapping on the micro-scale fibers. The as-formed thin PDA layer worked as a reactive template to generate PDA nanoparticles decorated on the fiber surfaces, imparting the textiles with excellent UV-shielding properties as well as a hierarchical structure similar to the morphology of the lotus leaf. After further modification with perfluorodecyl trichlorosilane, the textiles turned superhydrophobic with a water contact angle higher than 150°. Due to the strong adhesion of PDA to a wide range of materials, the present strategy may be extendable to fabrication of superhydrophobic surfaces on a variety of other substrates.

Effects of vocal fold lesions on particle deposition in a mouth-throat model: A numerical study.

OBJECTIVE: Dysphonia is very common worldwide and aerosol drug inhalation is an important treatment for patients with dysphonia. This study aimed to explore the effects of vocal fold (VF) lesions on the particle deposition pattern using computational modeling. METHODS: A realistic mouth-throat (MT) model of a healthy adult was constructed based on computed tomography images. Small and large vocal fold lesions were incorporated in the original model. A steady inhalation flowrate of 15 and 30 liter per minute (LPM) was used as the velocity inlet and monodisperse particles with diameters of 5 to 10 µm were simulated. RESULTS: Particles of larger size are more likely to be deposited in MT models, most of them distributed in oral cavity, oropharynx and supraglottis. The ideal sizes at 30 LPM ranged over 7-10 µm for healthy VFs and 6-8 µm for VF lesions. The best sizes at 15 LPM ranged over 6-8 µm for healthy VFs and 8-9 µm for VF lesions. CONCLUSION: Based on this study, VF lesions influence the deposition pattern in the glottis obviously. The ideal sizes differ at the flow rates of 15 and 30 LPM.

Low molecular weight PEI-based biodegradable lipopolymers as gene delivery vectors.

Non-viral gene vectors play an important role in the development of gene therapy. In this report, different hydrophobic chains were introduced into low molecular weight (LMW) PEI-based biodegradable oligomers to form a series of lipopolymers (LPs), and their structure-activity relationships were studied. Results revealed that the nine polymers can condense plasmid DNA well to form nanoparticles with appropriate sizes (120-250 nm) and positive zeta-potentials (+25-40 V). In vitro experiments were carried out and it was found that LP2 showed much higher transfection efficiency both in the presence and in the absence of serum under the polymer/DNA weight ratio of 0.8 in A549 cells.

Effects of vocal fold adduction on the particle deposition in the glottis: A numerical analysis and in vitro assessment.

BACKGROUND: The efficacy of inhalation therapy depends on the drug deposition in the human respiratory tract. This study investigates the effects of vocal fold adduction on the particle deposition in the glottis. METHODS: A realistic mouth-throat (MT) geometry was built based on CT images of a healthy adult (MT-A). Mild (MT-B) and great (MT-C) vocal fold (VF) adduction were incorporated in the original model. Monodisperse particles range in size from 3 to 12 µm were simulated at inspiration flow rates of 15, 30 and 45 L per minute (LPM). The regional deposition of drug aerosols was performed in 3D-printed models and quantified using high-performance liquid chromatography. RESULTS: Both the numerical analysis and in vitro experiments show that most particles are deposited in the mouth, pharynx and supraglottis, while few are deposited in the glottis and subglottis. For most cases in MT-A, the particle quantity in glottis is lower than 0.02 N/mm2 at 15 and 30 LPM while they increase dramatically at 45 LPM. It peaked at 0.347 N/mm2 for 5-µm particles at 45 LPM in MT-B and 2.324 N/mm2 for 6-µm particles at 30 LPM in MT-C. The lowest drug mass faction in the glottis in vitro were found at 15 LPM for MT-A and MT-C, and at 30 LPM for MT-B, whereas it peaked at 45 LPM for all MT models, 0.71% in MT-A, 1.16% in MT-B, and 2.53% in MT-C, respectively. CONCLUSION: Based on the results of this study, larger particles are more likely to be deposited in the oral cavity, oropharynx, and supraglottis than in the glottis. However, particle deposition in the glottis generally increases with VF adduction and greater inspiratory flow rates.

Experiment on formulation and drug release behavior of porosity asymmetric membrane capsules in vitro.

Porosity asymmetric membrane capsules were prepared to study the relationship between the capsule formulation and drug release. Cellulose acetate (CA) and pore formers were used in the capsule shell formulation as the main semipermeable membrane material. The capsules were permeable to both water and dissolved solutes. Using sparingly soluble drug acetaminophen as a model, cumulative release was calculated. The slope of the release profile from the distilled water had good relationship with the concentration of the pore formers F68. The release of acetaminophen was independent to the pH, osmotic pressure of dissolution medium, but influenced by intensity of agitation. When the concentration of pore former was low, zero-order release behavior was observed within 24 h which was consistent with Fickian diffusion model. When the concentration of pore former was high, however, Higuchi model release was found which is caused by Fickian diffusion and osmotic pressure release. With scanning electron microscope (SEM), the surface structure and cross-section of the capsule shell were also studied before and after drug delivery. With simple preparation and broad scope of drug application, porosity asymmetric membrane capsules can give desired drug extended release and show more convenience than controlled tablets with laser drilling.

[Effect of probiotics on respiratory tract pathogen colonization in neonates undergoing mechanical ventilation].

OBJECTIVE: To study the effect of mouth-fed probiotics on pathogenic bacteria colonization of the oropharynx and lower respiratory tract in neonates undergoing mechanical ventilation. METHODS: Randomized control method was employed to divide the neonates undergoing mechanical ventilation into probiotics (n=82) and control groups (n=83). The control group received routine treatment. The probiotics group was administered with oral probiotics in addition to routine treatment. The number of pathogenic bacteria colonized on the oropharynx and lower respiratory tract, and the number of the bacterial strain of ventilator-associated pneumonia (VAP) in the two groups were examined. The timing of the bacteria colonization and VAP occurrence were also examined. RESULTS: The probiotics group presented a lower bacterial strain colonization rate of the oropharynx pathogenic bacteria than the control group (35% vs 51%; P<0.05). The colonization time of pathogenic bacteria of the oropharynx and lower respiratory tract, and the time of VAP occurrence lagged behind in the probiotics group compared with that the control group (P<0.05). No adverse reaction caused by probiotics was found. CONCLUSIONS: Probiotics administration is effective in decreasing pathogenic bacteria colonization on the oropharynx, in postponing the pathogenic bacteria colonization on the oropharynx and lower respiratory tract and in delaying the occurrence of VAP in neonates undergoing mechanical ventilation.

Artificial intelligence modeling and molecular docking to analyze the laccase delignification process of rice straw by Comamonas testosteroni FJ17.

The laccase enzymatic characteristics and delignification processes of rice straw by Comamonas testosteroni FJ17 were investigated. Artificial intelligence modeling and molecular docking revealed the specific functional properties involved in the interaction between laccase and lignin compounds with a maximum laccase activity of 2016.7 U L-1 at 24 h. Scanning electron microscopy and X-ray diffractometer analysis confirmed that laccase caused fractures and holes on the surface of rice straw, where crystallinity decrease from 45.3 to 39.9%, and lignin content decreased from 19.0 to 10.3%. Gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry analysis showed that the main delignification process for laccase was via ß-o-4 and α-aryl ether cleavage, which generated several small molecular products. The laccase gene was cloned and bioinformatics analysis presented 317 amino acids with a predicted molecular weight of 33.13 kDa. Finally, laccase protein was found to have low binding energies with all lignin compounds tested, and lignin compounds were oxidized by laccase through hydrogen-bonding interactions with the amino acid residues.

Mineralized Enzyme-Based Biomaterials with Superior Bioactivities for Bone Regeneration.

The formation and metabolic balance of bone tissue is a controllable process of biomineralization, which is regulated by various cells, biomolecules, and ions. Enzyme molecules play an important role in this process, and alkaline phosphatase (ALP) is one of the most critical factors. In this study, inspired by the process of bone biomineralization, a biomimetic strategy is achieved for the preparation of mineralized ALP nanoparticles (MALPNs), by taking advantages of the unique reaction between ALP and calcium ions in Dulbecco's modified Eagle's medium. Benefiting from the mild biomineralization reaction, the MALPN system highly maintains the activity of ALP. Furthermore, the in vitro studies show that the MALPN system significantly enhances the proliferation of bone marrow mesenchymal stem cells and upregulates their osteogenic differentiation. When evaluated as synthetic graft materials for bone regeneration, the MALPN-incorporated gelatin methacryloyl graft shows excellent mechanical properties, a sustained release profile of ALP, and high biocompatibility and efficacy in guiding bone regeneration and vascularization for critical-sized rat calvarial defect. Moreover, we also demonstrate that the biomimetic mineralization strategy can be adopted for other proteins such as acid phosphatase, bovine serum albumin, fibrinogen, and gelatin, suggesting its universality for constructing mineralized protein-/enzyme-based bioactive materials for the application of tissue regeneration.

A new approach to in-situ "micromanufacturing": microfluidic fabrication of magnetic and fluorescent chains using chitosan microparticles as building blocks.

An in situ microfluidic assembly approach is described that can both produce microsized building blocks and assemble them into complex multiparticle configurations in the same microfluidic device. The building blocks are microparticles of the biopolymer chitosan, which is intentionally selected because its chemistry allows for simultaneous intraparticle and interparticle linking. Monodisperse chitosan-bearing droplets are created by shearing off a chitosan solution at a microfluidic T-junction with a stream of hexadecane containing a nonionic detergent. These droplets are then interfacially crosslinked into stable microparticles by a downstream flow of glutaraldehyde (GA). The functional properties of these robust microparticles can be easily varied by introducing various payloads, such as magnetic nanoparticles and/or fluorescent dyes, into the chitosan solution. The on-chip connection of such individual particles into well-defined microchains is demonstrated using GA again as the chemical "glue" and microchannel confinement as the spatial template. Chain flexibility can be tuned by adjusting the crosslinking conditions: both rigid chains and semiflexible chains are created. Additionally, the arrangement of particles within a chain can also be controlled, for example, to generate chains with alternating fluorescent and nonfluorescent microparticles. Such microassembled chains could find applications as microfluidic mixers, delivery vehicles, microscale sensors, or miniature biomimetic robots.

The use of ion mobility time-of-flight mass spectrometry to assess the migration of polyamide 6 and polyamide 66 oligomers from kitchenware utensils to food.

Oligomers, are, in general, unknown components of the polymer. These oligomers can migrate from the polymer into the food and become a non-intentionally added substance to the food. In this work, ion mobility time-of-flight mass spectrometry has been used to identify oligomers migrating from kitchenware. The structure elucidation of oligomers from polyamide 6 and polyamide 66 was achieved through the analysis of accurate m/z values of adducts and collision cross section values of precursor ions together with high-energy fragmentation patterns. Additionally, a method to extract oligomers from sunflower oil, cooked beans, soup and whole milk has been developed. Extraction recoveries ranged from 87 to 102% and limits of detection were from 0.03 to 0.11 mg/kg. It was observed that the migration from kitchenware to real food was below the specified migration limit of 5 mg/kg. However, this limit was exceeded for food simulants, which therefore overestimated the oligomer migration.

Clinical application and accuracy analysis of 3D printing guide plate based on polylactic acid in mandible reconstruction with fibula flap.

BACKGROUND: Due to the special anatomy morphology and physiological function of the mandible, it has always become a challenge to accurately reconstruct the mandibular defect in maxillofacial surgery. Digital three dimensions (3D) printing surgical guide, as the effective method for individual and accurate surgery, is a hotspot of clinical research at present. In this study, 3D printing PLA surgical guide plate was applied to reconstruct the mandibular defect with fibula flap, its clinical effect and accuracy were evaluated, which aimed to improve the accurate reconstruction of mandibular defects. METHODS: After sterilization, the dimension deformation of the PLA standard specimen were measured. Eighteen patients diagnose with mandibular tumor were collected as observation objects. Then partial mandible resection and simultaneous mandible reconstruction with fibula graft were implemented according to the computer-aided design plan. The clinical effects of 3D printing PLA guide plates application were evaluated by facial contours, occlusal stability and chewing function. Through registering the postoperative computed images reconstruction with preoperative designed shape, the reconstruction accuracy was evaluated by detecting the maximum difference including the distance between lateral convex point of the condyles, the distance between medial convex point of the condyles and the horizontal contained angle between long axis of the condyles. RESULTS: After high temperature steam sterilization, the curvature of the PLA specimen with 100% filling rate and 4.8 mm thickness were the smallest and their dimension deformation had no statistical significance (P>0.05). The minimally deformed 3D printing PLA guide plate were smoothly placed in the right place during the operation. After surgery, the face was symmetrical, the occlusal relationship was restored well and no deviation of the mandibular movement were found. The spiral computed tomography (SCT) scanning showed that the distance between lateral/medial convex points of the condyle and the horizontal contained angle were 128.34±8.68 mm, 88.69±6.75 mm and 145.87°±12.01°. Compared with preoperative design, the maximum deviation of the actual postoperative registration was 1.67±0.63, and the difference was not statistically significant (P>0.05). CONCLUSIONS: The application of 3D printing PLA guide plate in the segmental section and reconstruction of the mandible can effectively simplify the operation, and better reconstruct the continuity of the mandible. The surgical accuracy can fully meet clinical needs with relatively low prices.

A cellulose degrading bacterial strain used to modify rice straw can enhance Cu(II) removal from aqueous solution.

The development of lignocellulose-based adsorbents for the removal of heavy metals from wastewater has attracted much recent attention. In this work, a high-yield cellulose bacterial strain Comamonas testosteroni FJ17 was evaluated for its capacity to modify rice straw towards increased Cu(II) removal. For optimum modification time (45.5 h), inoculum concentration (1.25%), and rice straw dose (12.6 g L-1) the optimized adsorption capacity was 28.4 mg g-1. After strain FJ17 modification the equilibrium adsorption percentage of rice straw for Cu(II) increased from 6.6 to 27.4% at an initial concentration of 100 mg L-1. This increase was attributed to an increase in rice straw surface modification, leading to improved adsorption ability. SEM-EDS indicated that, following strain FJ17 treatment, the surface of the rice straw became more disintegrated and the specific surface area consequentially increased from 1.9 to 3.7 m2 g-1. FTIR analysis also showed new functional groups (carbonyl) appearing, and CC and CH3CR functionality being enhanced after biomodification. Functional groups associated with the benzene ring, silicified polymer and carbohydrates were all involved in the adsorption process. Adsorption of Cu was well described by the Freundlich isotherm model (R2 > 0.98) where adsorption was endothermic with potential for both chemical and physical interactions to coexist. Reusability experiments showed that the removal efficiency of Cu(II) decreased from 96.9 to 73.2% after five cycles. Overall C.testosteroni-treated rice straw had significant potential as a heavy metal biosorbent.

[Protective efficacy of a new fusion anti-caries DNA vaccine encoding antigens of both Streptococcus mutans and Streptococcus sobrinus].

OBJECTIVE: To construct a new fusion anti-caries DNA vaccine pGJGAC/VAX encoding antigens of both S. mutans and S. sobrinus so as to enhance the protective effect of DNA vaccine against S. sobrinus infection. METHODS: The CAT fragment of S. sobrinus OMZ176 gtf-I was amplified by semi-nest PCR and then inserted into the plasmid pGJA-P/VAX to construct the recombinant plasmid pGJGAC/VAX. The CHO cell was transfected and the expression of fusion protein detected using cellular immunohistochemistry and Western blot. Mice were immunized with pGJGAC/VAX and control plasmids via the intramuscular (i.m) or intranasal (i.n) routes. During the experiment, blood and saliva samples were collected at a 2-week interval for antibody assay by ELISA. Rats were orally challenged with S. mutans Ingbritt or S. sobrinus 6715 and then immunized i.n with pGJGAC/VAX, pGJA-P/VAX or pVAX1. The Keyes method was used to determine the caries activity. RESULTS: (1) CAT sequence was identical to the related sequence of gtf-I (OMZ176) in GenBank. The recombinant plasmid pGJGAC/VAX encoded the genes of antigens of both S. mutans and S. sobrinus. The expressed protein could respond to specific anti-PAc, anti-GLU and anti-CAT antibodies respectively. (2) As for antibody reactions, mice in the experiment group had significantly higher levels of anti-PAc, anti-GLU and anti-CAT IgG antibodies than those in the pVAX1 group (P < 0.01). The peak responses of specific anti-CAT antibodies were observed at 8 weeks (GAC/i.m) and 10 weeks (GAC/i.n) and were approximately 62.13 microg/ml and 11.43 microg/ml respectively. The peak responses of specific anti-CAT IgA antibodies were seen at 8 weeks (GAC/i.m) and 10 weeks (GAC/i.n) and were approximately 0.67% and 0.80% respectively. (3) In the group infected with S. mutans or S. sobrinus, the pGJGAC/VAX-immunized rats showed significantly fewer E, Ds and Dm lesions than pVAX1-immunized rats (P < 0.05) and decreased Ds and Dm levels than pGJA-P/VAX-immunized rats (P < 0.05) while there was no obvious difference in E lesions between the two groups (P > 0.05). CONCLUSION: A new fusion anti-caries DNA vaccine pGJGAC/VAX encoding antigens of both S. mutans and S. sobrinus is constructed successfully and expressed correctly in eukaryotic cells. It induces effective mucosal and systematic humoral responses so as to provide a better protection against S. sobrinus.

The Effects of Photobiomodulation on Vocal Fold Wound Healing: In Vivo and In Vitro Studies.

Background: Photobiomodulation (PBM) is increasingly used in dermatology and dentistry due to its benefit of promoting wound healing and relieving pain; however, there is no corresponding research report on the application of PBM to vocal fold wound healing. Objective: To assess the potential wound-healing effects of PBM on the vocal folds via in vivo and in vitro experiments. Materials and methods: In in vitro study, vocal fold fibroblasts (VFFs) were irradiated under a diode laser with wavelength of 635 nm at energy density of 8 J/cm2. The Cell Counting Kit-8 (CCK-8) assay was used to study the viability of VFFs, and the gene expressions of COL1A2, COL3A1, IL-6, HAS2, and COX-2 were investigated by real-time polymerase chain reaction (RT-PCR). In in vivo study, 15 rabbits were used. Lamina propria of the left vocal folds of 12 rabbits was unilaterally stripped, and 6 of them were treated with PBM. The remaining three rabbits served as normal controls. After 3 months, all animals were sacrificed to obtain histological results. We used laryngoscope to record images of the healing phase. Results: Irradiation with energy density of 8 J/cm2 resulted in a 2.8% increase in cell proliferation (p < 0.05). However, the difference between the experimental and the control group became larger after 48 and 72 h of subsequent irradiation. RT-PCR results showed that the expression of COL1A2, COL3A1, and HAS2 was higher, and the expression of IL-6 and COX-2 was lower. Histological examination showed that, compared with the injury group, hyaluronic acid (HA) increased significantly, collagen deposition decreased, and the configuration of collagen was more organized after PBM treatment. Conclusions: PBM can inhibit inflammatory reaction and promote the secretion of HA to decrease the deposition of collagen and regenerate vocal fold tissue without scar.