Construction and Evaluation of Alginate Dialdehyde Grafted RGD Derivatives/Polyvinyl Alcohol/Cellulose Nanocrystals IPN Composite Hydrogels.

To enhance the mechanical strength and cell adhesion of alginate hydrogel, making it satisfy the requirements of an ideal tissue engineering scaffold, the grafting of Arg-Gly-Asp (RGD) polypeptide sequence onto the alginate molecular chain was conducted by oxidation of sodium periodate and subsequent reduction amination of 2-methylpyridine borane complex (2-PBC) to synthesize alginate dialdehyde grafted RGD derivatives (ADA-RGD) with good cellular affinity. The interpenetrating network (IPN) composite hydrogels of alginate/polyvinyl alcohol/cellulose nanocrystals (ALG/PVA/CNCs) were fabricated through a physical mixture of ion cross-linking of sodium alginate (SA) with hydroxyapatite/D-glucono-δ-lactone (HAP/GDL), and physical cross-linking of polyvinyl alcohol (PVA) by a freezing/thawing method, using cellulose nanocrystals (CNCs) as the reinforcement agent. The effects of the addition of CNCs and different contents of PVA on the morphology, thermal stability, mechanical properties, swelling, biodegradability, and cell compatibility of the IPN composite hydrogels were investigated, and the effect of RGD grafting on the biological properties of the IPN composite hydrogels was also studied. The resultant IPN ALG/PVA/CNCs composite hydrogels exhibited good pore structure and regular 3D morphology, whose pore size and porosity could be regulated by adjusting PVA content and the addition of CNCs. By increasing the PVA content, the number of physical cross-linking points in PVA increased, resulting in greater stress support for the IPN composite hydrogels of ALG/PVA/CNCs and consequently improving their mechanical characteristics. The creation of the IPN ALG/PVA/CNCs composite hydrogels' physical cross-linking network through intramolecular or intermolecular hydrogen bonding led to improved thermal resistance and reduced swelling and biodegradation rate. Conversely, the ADA-RGD/PVA/CNCs IPN composite hydrogels exhibited a quicker degradation rate, attributed to the elimination of ADA-RGD by alkali. The results of the in vitro cytocompatibility showed that ALG/0.5PVA/0.3%CNCs and ADA-RGD/PVA/0.3%CNCs composite hydrogels showed better proliferative activity in comparison with other composite hydrogels, while ALG/PVA/0.3%CNCs and ADA-RGD/PVA/0.3%CNCs composite hydrogels displayed obvious proliferation effects, indicating that PVA, CNCs, and ADA-RGD with good biocompatibility were conducive to cell proliferation and differentiation for the IPN composite hydrogels.

Fabrication and Evaluation of Alginate/Bacterial Cellulose Nanocrystals-Chitosan-Gelatin Composite Scaffolds.

It is common knowledge that pure alginate hydrogel is more likely to have weak mechanical strength, a lack of cell recognition sites, extensive swelling and uncontrolled degradation, and thus be unable to satisfy the demands of the ideal scaffold. To address these problems, we attempted to fabricate alginate/bacterial cellulose nanocrystals-chitosan-gelatin (Alg/BCNs-CS-GT) composite scaffolds using the combined method involving the incorporation of BCNs in the alginate matrix, internal gelation through the hydroxyapatite-d-glucono-δ-lactone (HAP-GDL) complex, and layer-by-layer (LBL) electrostatic assembly of polyelectrolytes. Meanwhile, the effect of various contents of BCNs on the scaffold morphology, porosity, mechanical properties, and swelling and degradation behavior was investigated. The experimental results showed that the fabricated Alg/BCNs-CS-GT composite scaffolds exhibited regular 3D morphologies and well-developed pore structures. With the increase in BCNs content, the pore size of Alg/BCNs-CS-GT composite scaffolds was gradually reduced from 200 µm to 70 µm. Furthermore, BCNs were fully embedded in the alginate matrix through the intermolecular hydrogen bond with alginate. Moreover, the addition of BCNs could effectively control the swelling and biodegradation of the Alg/BCNs-CS-GT composite scaffolds. Furthermore, the in vitro cytotoxicity studies indicated that the porous fiber network of BCNs could fully mimic the extracellular matrix structure, which promoted the adhesion and spreading of MG63 cells and MC3T3-E1 cells on the Alg/BCNs-CS-GT composite scaffolds. In addition, these cells could grow in the 3D-porous structure of composite scaffolds, which exhibited good proliferative viability. Based on the effect of BCNs on the cytocompatibility of composite scaffolds, the optimum BCNs content for the Alg/BCNs-CS-GT composite scaffolds was 0.2% (w/v). On the basis of good merits, such as regular 3D morphology, well-developed pore structure, controlled swelling and biodegradation behavior, and good cytocompatibility, the Alg/BCNs-CS-GT composite scaffolds may exhibit great potential as the ideal scaffold in the bone tissue engineering field.

Nano-SiO2 reinforced alginate-chitosan-gelatin nanocomposite hydrogels with improved physicochemical properties and biological activity.

Alginate (Alg) hydrogels possess desirable advantages for application in tissue engineering; however, they are limited by their weak mechanical properties, poor chronical stability in phosphate buffered saline, and absence of mammalian cell recognition sites, severely restricting their biomedical applications. To overcome these limitations, we integrated Alg hydrogels with nano-silica (SiO2) to produce nano-SiO2 reinforced Alg-chitosan-gelatin nanocomposite hydrogels (Alg/SiO2-CHI-GA NCH) for biomedical purposes, utilizing Chitosan (CHI) and gelatin (GA) in an alternate electrostatic adsorption. Specifically, we investigated the regulatory and promotional effects of the nano-SiO2 on the morphological structure, mechanical properties, thermal stability, rheological properties, swelling, biodegradability, biomineralization and cytocompatibility of the resultant Alg/SiO2-CHI-GA NCH. The experimental findings demonstrate that the constructed Alg/SiO2-CHI-GA NCH exhibited uniform morphology and a regular structure. Upon freeze-drying, the internal cross-sections of the NCH exhibited a honeycomb porous structure. Furthermore, the physicochemical properties and biological activities of the prepared Alg/SiO2-CHI-GA NCH were regulated to some extent by nano-SiO2 content. Notably, nano-SiO2 inclusion enhanced the attachment and viability of MG63 and MC3T3-E1 cells and induced three-dimensional cell growth in ALG/SiO2-CHI-GA NCH. Among the fabricated NCH, Alg/SiO2-CHI-GA NCH with 0.5% and 1.0% (w/v) nano-SiO2 exhibited significant proliferative activity, which is attributable to their high porosity and uniform cell adhesion. Furthermore, the alkaline phosphatase activity in the cells gradually increased with increasing of nano-SiO2 amount, indicating the favorable effect of nano-SiO2 on the osteogenic differentiation of MG63 and MC3T3-E1 cells. Our study findings provide a comprehensive foundation for the structural- and property-related limitations of Alg hydrogels in biomedicine, thereby expanding their potential applications in tissue engineering.

Synthesis and assessment of CTAB and NPE modified organo-montmorillonite for the fabrication of organo-montmorillonite/alginate based hydrophobic pharmaceutical controlled-release formulation.

The research goal of the present study was to develop a carrier for loading and controlled -release of the hydrophobic drug with the combined use of organo-montmorillonite (OMMT) and alginate. The OMMT was synthesized through the intercalation modification of sodium montmorillonite (Na-MMT) with cationic cetyltrimethylammonium bromide (CTAB), nonionic nonylphenol polyoxyethylene ether (NPE) and the mixture of them via simple and convenient wet ball-milling method. Furthermore, the organo-montmorillonite/alginate (OMMT/Alg) composite hydrogel beads with slow and controlled release properties were constructed by using alginate as a coating material under the exogenous cross-linking of calcium ions. The physical and chemical properties of OMMT were comparatively evaluated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), thermogravimetric analyzer (TGA), BET-specific surface area measurements, and drug adsorption experiments. Experimental results showed that the presence of CTAB was able to facilitate the intercalation of CTAB/NPE into Na-MMT through the cation exchange reaction. And the cationic CTAB and nonionic NPE were adsorbed or intercalated into the MMT lamellar structure through the wet ball-milling process, which could change the hydrophilic nature of Na-MMT and improve its affinity to the hydrophobic drug molecules. In addition, the OMMT/Alg composite hydrogel beads displayed superior sustained-release properties than Na-MMT/Alg, mainly ascribed to the good affinity of OMMT to hydrophobic drug that retarded the drug diffusion. In particular, CTA/NPE-MMT/Alg with the highest loading capacity (LC) and encapsulation efficiency (EE) revealed the optimal controlled performance for the release of hydrophobic ibuprofen. The release followed the Korsmeyer-Peppas model suggested non-Fickian diffusion release mechanism. Based on the high drug loading capacity and excellent controlled drug release properties, the CTA/NPE-MMT/Alg incorporating hydrophobic drugs into hydrophilic matrices could be a highly promising material for use in hydrophobic drug delivery.

Entrapment of bacterial cellulose nanocrystals stabilized Pickering emulsions droplets in alginate beads for hydrophobic drug delivery.

In this work, the interfacial assembly of amphiphilic bacterial cellulose nanocrystals (BCNs) by Pickering emulsion method was proposed to improve the compatibility between the alginate and hydrophobic drug. BCNs prepared by sulfuric acid hydrolysis of biosynthesized bacterial cellulose was used as the particulate emulsifiers, whereas the model drug, alfacalcidol, dissolved in CH2Cl2 was used as the oil phase. The oil-in-water Pickering emulsions were prepared by ultrasonic dispersion method and then they were well dispersed in alginate solution. Ultimately, the drug-loaded alginate composite beads were successfully fabricated by external gelation. The characterization results revealed that BCNs possessed good colloidal property and could form flocculated fibril network, which was beneficial to stabilize Pickering emulsions. The irreversible adsorption of BCNs at the oil-water interface could make the Pickering emulsions preserve the droplets against coalescence and Ostwald ripening when they were dispersed in alginate solution. The interfacial assembly of amphiphilic BCNs and the hydrogel shells of the alginate composite beads formed by external gelation achieved the loading and sustained release of alfacalcidol. The release curves were well fitted by Korsmeyer Peppas model and the release mechanism of alfacalcidol from the composite beads was attributed to non-Fickian transport. In addition, the resultant alginate composite beads exhibited low cytotoxicity and good capabilities for osteoblast differentiation.