Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Más filtros

Banco de datos
Tipo de estudio
Tipo del documento
País de afiliación
Intervalo de año de publicación
1.
Biomed Mater ; 15(6): 065003, 2020 09 26.
Artículo en Inglés | MEDLINE | ID: mdl-32503006

RESUMEN

Although silicone implants are the most popular choice around the world for breast augmentation, reconstruction, and revision, due to the poor antibacterial properties and limited biocompatibility of silicone rubber (SR), one of the major complications, capsule contracture, is a lingering problem. To overcome the two main shortcomings, a dual ion implantation technique was applied to modify the surface of SR with the basic skeleton element of organic matter, carbon (C) and the broad-spectrum bactericide, silver (Ag). We present surface characterization, toxicological effects, and evaluation of the mechanical, antibacterial and biocompatible properties of C and Ag co-implanted SR (C/Ag-SRs). After ion implantation, surface roughness and tensile strength of these new materials increased. Biotoxicity was fully assessed by in vitro experiments on human fibroblasts and in vivo experiments on rats, showing that the low-Ag groups met safety standards. Both the anti-bacterial adhesion and bactericidal abilities of C/Ag-SRs were superior to those of SR, which had few antibacterial activities, especially against Staphylococcus epidermidis. With respect to biocompatibility, the adhesion of fibroblasts was promoted, while their proliferation was moderately inhibited on ion-implanted surfaces. After subcutaneous implantation in rats for 7, 30, 90 and 180 d, the capsular thickness around C/Ag-SRs was significantly lower than that around the SR. Additionally, there was no difference in the inflammatory reaction after 7 d of retention in vivo between C/Ag-SRs and SR. The results demonstrate that C/Ag-SRs are desirable shell materials for breast implants.


Asunto(s)
Antibacterianos/química , Materiales Biocompatibles/química , Cobre/química , Elastómeros de Silicona/química , Plata/química , Animales , Adhesión Celular , Supervivencia Celular , Femenino , Fibroblastos/metabolismo , Proteína-Tirosina Quinasas de Adhesión Focal/metabolismo , Inflamación , Iones , Ensayo de Materiales , Diseño de Prótesis , Ratas , Ratas Sprague-Dawley , Estrés Mecánico , Temperatura , Resistencia a la Tracción
2.
J Tissue Eng Regen Med ; 12(2): e905-e917, 2018 02.
Artículo en Inglés | MEDLINE | ID: mdl-28097806

RESUMEN

A porous structure is critically important for wound dressing or tissue engineering scaffolds. However, the influence of the pore sizes on cell proliferation, tissue regeneration and the underlying mechanism remains unclear. In this study, silicone rubber membranes with different pore sizes were prepared using certain constituents of liquid silicone rubber precursor/liquid paraffin/hexane based on our previous studies. It was found that pore size had a significant impact on cell proliferation and wound healing. The CCK8 analysis revealed that the membrane with a certain pore size (110.47 µm, middle pore membrane, MPM) was suitable for cell proliferation compared with the membranes with other pore sizes (218.03 µm, large pore membrane, LPM; 5.27 µm, small pore membrane, SPM; non-porous membrane, NPM). Further studies demonstrated that the MPM promoted cell proliferation via activating the Wnt/ß-catenin signalling pathway. More importantly, wound healing experiments showed that 7 days post-wounding, the rate of wound healing was 89.25% with the MPM, which was significantly higher than with LPM, SPM or NPM. The in vivo data indicated that wound healing was accelerated by treatment with a silicone rubber membrane with a pore size of 110.47 µm. Our results strongly suggest that different pore structures might affect cell proliferation and wound healing and that a silicone rubber membrane with a specific pore size could potentially be used as a promising wound dressing. Copyright © 2017 John Wiley & Sons, Ltd.


Asunto(s)
Membranas Artificiales , Regeneración/efectos de los fármacos , Elastómeros de Silicona/farmacología , Cicatrización de Heridas/efectos de los fármacos , Animales , Adhesión Celular/efectos de los fármacos , Adhesión Celular/genética , Proliferación Celular/efectos de los fármacos , Proliferación Celular/genética , Ratones Endogámicos BALB C , Porosidad , Antígeno Nuclear de Célula en Proliferación/metabolismo , Repitelización/efectos de los fármacos , Repitelización/genética , Vía de Señalización Wnt/efectos de los fármacos , Vía de Señalización Wnt/genética , beta Catenina/metabolismo
3.
Sci Rep ; 6: 24596, 2016 Apr 18.
Artículo en Inglés | MEDLINE | ID: mdl-27086569

RESUMEN

A desirable microenvironment is essential for wound healing, in which an ideal moisture content is one of the most important factors. The fundamental function and requirement for wound dressings is to keep the wound at an optimal moisture. Here, we prepared serial polyurethane (PU) membrane dressings with graded water vapor transmission rates (WVTRs), and the optimal WVTR of the dressing for wound healing was identified by both in vitro and in vivo studies. It was found that the dressing with a WVTR of 2028.3 ± 237.8 g/m(2)·24 h was able to maintain an optimal moisture content for the proliferation and regular function of epidermal cells and fibroblasts in a three-dimensional culture model. Moreover, the dressing with this optimal WTVR was found to be able to promote wound healing in a mouse skin wound model. Our finds may be helpful in the design of wound dressing for wound regeneration in the future.


Asunto(s)
Vendajes/efectos adversos , Repitelización , Animales , Proliferación Celular , Células Cultivadas , Células Epiteliales/metabolismo , Células Epiteliales/fisiología , Fibroblastos/metabolismo , Fibroblastos/fisiología , Humedad , Masculino , Membranas Artificiales , Ratones , Ratones Endogámicos BALB C , Poliuretanos/química , Porosidad , Volatilización
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA