Synthesis of Lightweight Renewable Microwave-Absorbing Bio-Polyurethane/Fe3O4 Composite Foam: Structure Analysis and Absorption Mechanism.

Sustainable renewable polymer foam used as a lightweight porous skeleton for microwave absorption is a novel strategy that can effectively solve the problems of the large surface density, high additive amount, and narrow absorbing band of absorbing materials. In this article, novel renewable microwave-absorbing foams were prepared using Sapiumse biferum kernel oil-based polyurethane foam (BPUF) as porous matrix and Fe3O4-nanoparticles as magnetic absorbents. The microstructure and the microwave absorption performance, the structural effects on the properties, and electromagnetic mechanism of the magnetic BPUF (mBPUF) were systematically characterized and analyzed. The results show that the mBPUF displayed a porous hierarchical structure and was multi-interfacial, which provided a skeleton and matching layer for the Fe3O4 nanoparticles. The effective reflection loss (RL ≤ -10 dB) frequency of the mBPUF was from 4.16 GHz to 18 GHz with only 9 wt% content of Fe3O4 nanoparticles at a thickness of 1.5~5 mm. The surface density of the mBPUF coatings was less than 0.5 kg/cm2 at a thickness of 1.8 mm. The lightweight characteristics and broadband absorption were attributed to the porous hierarchical structures and the dielectric combined with the magnetic loss effect. It indicates that the mBPUF is a prospective broadband-absorbing material in the field of lightweight stealth materials.

Co-Immobilization of Rhizopus oryzae and Candida rugosa Lipases onto mMWCNTs@4-arm-PEG-NH2-A Novel Magnetic Nanotube-Polyethylene Glycol Amine Composite-And Its Applications for Biodiesel Production.

This article describes the successful synthesis of a novel nanocomposite of superparamagnetic multi-walled nanotubes with a four-arm polyethylene glycol amine polymer (mMWCNTs@4-arm-PEG-NH2). This composite was then employed as a support for the covalent co-immobilization of Rhizopus oryzae and Candida rugosa lipases under appropriate conditions. The co-immobilized lipases (CIL-mMWCNTs@4-arm-PEG-NH2) exhibited maximum specific activity of 99.626U/mg protein, which was 34.5-fold superior to that of free ROL, and its thermal stability was greatly improved. Most significantly, CIL-mMWCNTs@4-arm-PEG-NH2 was used to prepare biodiesel from waste cooking oil under ultrasound conditions, and within 120 min, the biodiesel conversion rate reached 97.64%. This was due to the synergy effect between ROL and CRL and the ultrasound-assisted enzymatic process, resulting in an increased biodiesel yield in a short reaction time. Moreover, after ten reuse cycles, the co-immobilized lipases still retained a biodiesel yield of over 78.55%, exhibiting excellent operational stability that is attractive for practical applications. Consequently, the combined use of a novel designed carrier, the co-immobilized lipases with synergy effect, and the ultrasound-assisted enzymatic reaction exhibited potential prospects for future applications in biodiesel production and various industrial applications.

Multi-point enzyme immobilization, surface chemistry, and novel platforms: a paradigm shift in biocatalyst design.

Engineering enzymes with improved catalytic properties in non-natural environments have been concerned with their diverse industrial and biotechnological applications. Immobilization represents a promising but straightforward route, and immobilized biocatalysts often display higher activities and stabilities compared to free enzymes. Owing to their unique physicochemical characteristics, including the high-specific surface area, exceptional chemical, electrical, and mechanical properties, efficient enzyme loading, and multivalent functionalization, nano-based materials are postulated as suitable carriers for biomolecules or enzyme immobilization. Enzymes immobilized on nanomaterial-based supports are more robust, stable, and recoverable than their pristine counterparts, and are even used for continuous catalytic processes. Furthermore, the unique intrinsic properties of nanomaterials, particularly nanoparticles, also confer the immobilized enzymes to be used for their broader applications. Herein, an effort has been made to present novel potentialities of multi-point enzyme immobilization in the current biotechnological sector. Various nano-based platforms for enzyme/biomolecule immobilization are discussed in the second part of the review. In summary, recent developments in the use of nanomaterials as new carriers to construct robust nano-biocatalytic systems are reviewed, and future trends are pointed out in this article.

Genetically Programmed Temperature-Responsive Barnacle-Derived Protein with an Enhanced Adhesion Ability.

There is an emerging strong demand for smart environmentally responsive protein-based biomaterials with improved adhesion properties, especially underwater adhesion for potential environmental and medical applications. Based on the fusion of elastin-like polypeptides (ELPs), SpyCatcher and SpyTag modules, biosynthetic barnacle-derived protein was genetically engineered and self-assembled with an enhanced adhesion ability and temperature response. The water resistance ability of the synthetic protein biopolymer with a network structure increased to 98.8 from 58.5% of the original Cp19k, and the nonaqueous adhesion strength enhanced to 1.26 from 0.68 MPa of Cp19k. The biopolymer showed an improved adhesion ability toward hydrophilic and hydrophobic surfaces as well as diatomite powders. The combination of functional module ELPs and SpyTag/SpyCatcher could endow the biosynthetic protein with temperature response, an insoluble form above 42 °C and a soluble form at 4 °C. The combinational advantages including temperature response and adhesion performance make the self-assembled protein an excellent candidate in surgical adhesion, underwater repair, and surface modification of various coatings. Distinct from the traditional approach of utilizing solely ELPs, the integration of short ELPs with Spy partners exhibited a synergistic enhancement in the temperature response. The synergistic effects of two functional modules provide a technical method and insight for designing smart self-assembled protein-based biopolymers.

Engineering Yarrowia lipolytica as a Cellulolytic Cell Factory for Production of p-Coumaric Acid from Cellulose and Hemicellulose.

De novo biosynthesis of high-value added food additive p-coumaric acid (p-CA) direct from cellulose/hemicellulose is a more sustainable route compared to the chemical route, considering the abundant cellulose/hemicellulose resources. In this study, a novel factory was constructed for the production of p-CA in Yarrowia lipolytica using cellulose/hemicellulose as the sole carbon source. Based on multicopy integration of the TAL gene and reprogramming the shikimic acid pathway, the engineered strain produced 1035.5 ± 67.8 mg/L p-CA using glucose as a carbon source. The strains with overexpression of cellulases and hemicellulases produced 84.3 ± 2.4 and 65.3 ± 4.6 mg/L p-CA, using cellulose (carboxymethyl-cellulose) or hemicellulose (xylan from bagasse) as the carbon source, respectively. This research demonstrated the feasibility of conversion of cost-effective cellulose/hemicellulose into a value-added product and provided a sustainable cellulolytic cell factory for the utilization of cellulose/hemicellulose.

Design of a Genetically Programmed Biomimetic Lipase Nanoreactor.

Alternative to the traditionally independent production of lipase, chemical synthesis of nano-carriers, and then preparing nanoimmobilized enzymes, we exploit a yeast genetically programmed virus biomimetic lipase nanoreactor in a sustainable manner. The nanoreactor biogenesis process integrated lipase production, protein component (coat-protein subunit and scaffold protein) production, self-assembly of protein components, and the encapsulation of lipase into protein nanocages using a simple process. It included overexpression of nanocage components, coat-protein subunits, and fused lipase-scaffold proteins and subsequent spontaneous self-assembly and encapsulation based on the specific interaction between the coat-protein subunit and the scaffold protein fused in the target lipase enzyme. The genetically programmable lipase nanoreactor showed improved stability under various harsh conditions, and was validated in fatty acid methyl ester synthesis with 86% yield at a high concentration of waste cooking oil (200 mM), which demonstrates the robustness and feasibility of the lipase nanoreactor in biodiesel production.

A genetically-encoded synthetic self-assembled multienzyme complex of lipase and P450 fatty acid decarboxylase for efficient bioproduction of fatty alkenes.

We develop an efficient and economic cascade multienzymes for fatty alkene bioproduction based on the lipase hydrolysis coupled to the P450 decarboxylation in the form of multiple enzyme complex. One step preparation of a multienzyme complex was based on a mixture of cell extracts including dockerin-enzyme fusions and one cohesin-cellulose binding module (CBM) fusion through high specific interaction of dockerin and cohesin. Simultaneously, the CBM was bound to cellulose carrier to form co-immobilized multienzyme. The key factors affecting overall efficiency of alkene bioproduction including substrate channeling of hydrolysis and decarboxylation, the ratio and position of two enzymes, stability were all addressed by genetically engineering of the synthetic CBM-cohesin fusions. The multienzymes exhibited more than 9.2 fold enhancement in initial reaction rate and much higher conversion yields (69%-72%) compared to mixture of free enzyme counterpart. The enzymatic cascade based multienzymes could efficiently convert renewable triglycerides to alkenes.

[Advances in platform compounds and polymers from vegetable oils].

Vegetable oil is one of the most potential alternatives of petroleum and has become a hot issue in recent years. This review focuses on the influence of vegetable oil structure on platform compounds and polymers properties, and further systematically introduces their developments and the latest progress. Meanwhile, we also summarized the main confronting problems and the future development directions in the research of oil-based platform compounds and polymers. The review provides useful information for readers to fully understand biochemical engineering of vegetable oils and their prospects.

Enhanced performance of lipase via microcapsulation and its application in biodiesel preparation.

In the present study, a surface-active enzyme, lipase was immobilized in polyethyleneimine (PEI) microcapsules and then modified with oxidized multiwall carbon nanotubes (MWCNTs). The resulting lipase microcapsules exhibited higher activity and stability, since the activity of microcapsules was 21.9 folds than that of the free counterpart. Numerous interfaces which were created in polycondensation enhanced the performance of lipases. Illustrated by confocal laser scanning microscope (CLSM), it was found that microcapsules, whose barrier properties against molecules with diameter >4.6 nm, were with a semipermeable and porous membrane structure. The lipases preferred to locate in the wall of the microcapsules. The oxidized multiwall carbon nanotubes (MWCNTs) were further added to modify microcapsules, resulting in even higher activity. The nanocomposites were examined by scanning electron microscope (SEM) and zeta-potential analyzer. The results indicated the superior catalytic performances were attributed to the augmented interface and decreased positive charge. Finally, the MWCNTs modified microcapsules were utilized in producing biodiesel with a 97.15% yield and retained nearly 90% yield after running 10 cycles. This approach of microcapsulation will be highly beneficial for preparing various bio-active microcapsules with excellent catalytic performance.

Improving stability and activity of cross-linked enzyme aggregates based on polyethylenimine in hydrolysis of fish oil for enrichment of polyunsaturated fatty acids.

Cross-linking of enzyme aggregates from recombinant Geotrichum sp. lipase based on polyethylenimine (PEI) was applied to hydrolyze fish oil for enrichment of polyunsaturated fatty acids successfully. Through acetone precipitation and cross-linking of physical aggregates using glutaraldehyde in the presence of PEI, firmly cross-linked enzyme aggregates (PEI-CLEAs) were prepared. They could maintain more than 65% of relative hydrolysis degree after incubation in the range of 50-55 °C for 4 h and maintain more than 85% of relative hydrolysis degree after being treated by acetone, tert-butyl alcohol and octane for 4 h. PEI-CLEAs increased hydrolysis degree to 42% from 12% by free lipase. After five batch reactions, PEI-CLEAs still maintained 72% of relative hydrolysis degree. Hydrolysis of fish oil by PEI-CLEAs produced glycerides containing concentrated EPA and DHA in good yield. PEI-CLEAs had advantages over general CLEAs and free lipase in initial reaction rate, hydrolysis degree, thermostability, organic solvent tolerance and reusability.