In vitro antibacterial activity and cytocompatibility of magnesium-incorporated poly(lactide-co-glycolic acid) scaffolds.

BACKGROUND: Bone defects are often combined with the risk of infection in the clinic, and artificial bone substitutes are often implanted to repair the defective bone. However, the implant materials are carriers for bacterial growth, and biofilm can form on the implant surface, which is difficult to eliminate using antibiotics and the host immune system. Magnesium (Mg) was previously reported to possess antibacterial potential. METHODS: In this study, Mg was incorporated into poly(lactide-co-glycolic acid) (PLGA) to fabricate a PLGA/Mg scaffold using a low-temperature rapid-prototyping technique. All scaffolds were divided into three groups: PLGA (P), PLGA/10 wt% Mg with low Mg content (PM-L) and PLGA/20 wt% Mg with high Mg content (PM-H). The degradation test of the scaffolds was conducted by immersing them into the trihydroxymethyl aminomethane-hydrochloric acid (Tris-HCl) buffer solution and measuring the change of pH values and concentrations of Mg ions. The antibacterial activity of the scaffolds was investigated by the spread plate method, tissue culture plate method, scanning electron microscopy and confocal laser scanning microscopy. Additionally, the cell attachment and proliferation of the scaffolds were evaluated by the cell counting kit-8 (CCK-8) assay using MC3T3-E1 cells. RESULTS: The Mg-incorporated scaffolds degraded and released Mg ions and caused an increase in the pH value. Both PM-L and PM-H inhibited bacterial growth and biofilm formation, and PM-H exhibited higher antibacterial activity than PM-L after incubation for 24 and 48 h. Cell tests revealed that PM-H exerted a suppressive effect on cell attachment and proliferation. CONCLUSIONS: These findings demonstrated that the PLGA/Mg scaffolds possessed favorable antibacterial activity, and a higher content of Mg (20%) exhibited higher antibacterial activity and inhibitory effects on cell attachment and proliferation than low Mg content (10%).

Incorporation of nanosized calcium silicate improved osteointegration of polyetheretherketone under diabetic conditions.

Diabetes can impair osteoblastic functions and negatively interfere with osteointegration at the bone/implant interface. Previously, we prepared a nanosized calcium silicate (CS) incorporated-polyetheretherketone (PK) biocomposite (CS/PK) and found that the CS/PK composite exhibited enhanced osteoblast functions in vitro and osteointegration in vivo, but its bioperformance under diabetic conditions remained elusive. In this study, MC3T3-E1 cells incubated on CS/PK and PK samples were subjected to diabetic serum (DS) and normal serum (NS); cell attachment, morphology, spreading, proliferation, and osteogenic differentiation were compared to assess in vitro osteoblastic functions on the surfaces of different materials. An in vivo test was performed on diabetic rabbits implanted with CS/PK or PK implants into the cranial bone defect to assess the osteointegration ability of the implants. In vitro results showed that diabetes inhibited osteoblastic functions evidenced by impaired morphology and spreading, and decreased attachment, proliferation, and osteogenic differentiation compared with the findings under normal conditions. Notably, CS/PK ameliorated osteoblastic disfunction under diabetic conditions in vitro. In vivo results from micro-CT and histologic examinations revealed that rabbits with CS/PK implants exhibited improved osteointegration at the bone/implant interface under diabetic conditions compared with PK. Therefore, the CS/PK composite improved the impaired osteointegration induced by diabetes and is a promising orthopedic or craniofacial implant material that may obtain good clinical performance in diabetic patients.

Tumor Microenvironmental pH and Enzyme Dual Responsive Polymer-Liposomes for Synergistic Treatment of Cancer Immuno-Chemotherapy.

Despite recent advances in tumor treatment through cancer immunotherapy, the efficacy of this approach remains to be improved. Looking forward to high rates of objective clinical response, cancer immunotherapy combined with chemotherapy has gained increasing attention recently. Here, we constructed liposomes with matrix metalloproteinases (MMPs) responsive moiety and PD-L1 inhibitor conjugate combine with low dose chemotherapy to achieve enhanced antitumor efficacy. Upon introduction of the pH-responsive polymer to LPDp, the coassembly could be almost stable in physiological conditions and tumor microenvironments and release the loaded cargos at the lysosome. MMP-2 enzyme extracellularly secreted by the B16F10 cells could cleave the cross-linker and liberate the PD-L1 inhibitor effectively disrupting the PD-1/PD-L1 interaction in vitro. Low dose DOX encapsulated in the LPDp was capable of sensitizing B16F10 cells to CTLs by inducing overexpression of M6PR on tumor cell membranes. In comparison with free PD-L1 inhibitor, LPDp improved the biodistribution and on-demand release of the peptide inhibitor in tumor regions following administration. LPDp achieved the optimal tumor suppression efficiency (∼78.7%), which demonstrated the significantly enhanced antitumor effect ( P < 0.01) than that of LPp (∼57.5%) as well as that of LD (<40%), attributing to synergistic contribution from the substantial increase in M6PR expression on tumor cells and the blockade of immune checkpoints. This strategy provides a strong rationale for combining standard-of-care chemotherapy with relative nontoxic and high specific immunotherapy.

Comparison of the Effects of Daptomycin on Bacterial and Model Membranes.

Daptomycin is a phosphatidylglycerol specific, calcium-dependent membrane-active antibiotic that has been approved for the treatment of Gram-positive infections. A recent Bacillus subtilis study found that daptomycin clustered into fluid lipid domains of bacterial membranes and the membrane binding was correlated with dislocation of peripheral membrane proteins and depolarization of membrane potential. In particular, the study disproved the existence of daptomycin ion channels. Our purpose here is to study how daptomycin interacts with lipid bilayers to understand the observed phenomena on bacterial membranes. We performed new types of experiments using aspirated giant vesicles with an ion leakage indicator, making comparisons between daptomycin and ionomycin, performing vesicle-vesicle transfers, and measuring daptomycin binding to fluid phase versus gel phase bilayers and bilayers including cholesterol. Our findings are entirely consistent with the observations for bacterial membranes. In addition, daptomycin is found to cause ion leakage through the membrane only if its concentration in the membrane is over a certain threshold. The ion leakage caused by daptomycin is transient. It occurs only when daptomycin binds the membrane for the first time; afterward, they cease to induce ion leakage. The ion leakage effect of daptomycin cannot be transferred from one membrane to another. The level of membrane binding of daptomycin is reduced in the gel phase versus the fluid phase. Cholesterol also weakens the membrane binding of daptomycin. The combination of membrane concentration threshold and differential binding is significant. This could be a reason why daptomycin discriminates between eukaryotic and prokaryotic cell membranes.

Action of Antimicrobial Peptides on Bacterial and Lipid Membranes: A Direct Comparison.

The bacterial membrane represents an attractive target for the design of new antibiotics to combat widespread bacterial resistance. Understanding how antimicrobial peptides (AMPs) and other membrane-active agents attack membranes could facilitate the design of new, effective antimicrobials. Despite intense study of AMPs on model membranes, we do not know how well the mechanism of attack translates to real biological membranes. To that end, we have characterized the attack of AMPs on Escherichia coli cytoplasmic membranes and directly compared this action to model membranes. AMPs induce membrane permeability in E. coli spheroplasts or giant unilamellar vesicles (GUVs) under well-defined concentrations of AMPs and fluorescent molecules. The action of AMPs on spheroplasts is unique in producing an intracellular fluorescence intensity time curve that increases in a sigmoidal fashion to a steady state. This regular pattern is reproducible by melittin, LL37, and alamethicin but not by CCCP or daptomycin, agents known to cause ion leakage. Remarkably, a similar pattern was also reproduced in GUVs. Indeed the steady-state membrane permeability induced by AMPs is quantitatively the same in spheroplasts and GUVs. There are, however, interesting dissimilarities in details that reveal differences between bacterial and lipid membranes. Spheroplast membranes are permeabilized by a wide range of AMP concentrations to the same steady-state membrane permeability. In contrast, only a narrow range of AMP concentrations permeabilized GUVs to a steady state. Tension in GUVs also influences the action of AMPs, whereas the spheroplast membranes are tensionless. Despite these differences, our results provide a strong support for using model membranes to study the molecular interactions of AMPs with bacterial membranes. As far as we know, this is the first time the actions of AMPs, on bacterial membranes and on model membranes, have been directly and quantitatively compared.

Low-Volatility Model Demonstrates Humidity Affects Environmental Toxin Deposition on Plastics at a Molecular Level.

Despite the ever-increasing prevalence of plastic debris and endocrine disrupting toxins in aquatic ecosystems, few studies describe their interactions in freshwater environments. We present a model system to investigate the deposition/desorption behaviors of low-volatility lake ecosystem toxins on microplastics in situ and in real time. Molecular interactions of gas-phase nonylphenols (NPs) with the surfaces of two common plastics, poly(styrene) and poly(ethylene terephthalate), were studied using quartz crystal microbalance and sum frequency generation vibrational spectroscopy. NP point sources were generated under two model environments: plastic on land and plastic on a freshwater surface. We found the headspace above calm water provides an excellent environment for NP deposition and demonstrate significant NP deposition on plastic within minutes at relevant concentrations. Further, NP deposits and orders differently on both plastics under humid versus dry environments. We attributed the unique deposition behaviors to surface energy changes from increased water content during the humid deposition. Lastly, nanograms of NP remained on microplastic surfaces hours after initial NP introduction and agitating conditions, illustrating feasibility for plastic-bound NPs to interact with biota and surrounding matter. Our model studies reveal important interactions between low-volatility environmental toxins and microplastics and hold potential to correlate the environmental fate of endocrine disrupting toxins in the Great Lakes with molecular behaviors.

Analysis of maximum mouth opening and its related factors in 3- to 5-year-old Taiwanese children.

Maximum mouth opening (MMO) can reflect the function of the dentofacial musculature and joint system, and routine oral examinations should include its assessment. To diagnose abnormalities using MMO measurements, it is necessary to establish the normal range of MMO; however, few studies have investigated this subject in Taiwan. Therefore, the purposes of this study were to determine the normal MMO range in 3- to 5-year-old preschool children and to investigate the factors correlated with MMO. We examined the interincisal distance, defined as the distance between the edges of the upper and lower incisors, in 518 preschool children (age range 3-5 years; 271 boys and 247 girls) with a plastic sliding caliper. The MMO on both sides of the mouth and mouth width (MW) was measured 3 times. No differences in MMO were found between the genders. The interincisal distance was 37.47 (±4.11) mm for boys and 36.93 (±3.85) mm for girls, whereas the mean MMO was 37.21 (±3.99) mm. The MMO increased with the increasing age of the children, and the mean value of MMO in children aged 3, 4, and 5 was 35.31 (±4.03), 36.61 (±3.79), and 38.31 (±3.88) mm, respectively. Furthermore, MMO was found to correlate with weight and MW. MMO increased by 0.19 mm per increased weight and 0.37 mm per increased MW. The mean value of MMO in 3- to 5-year-old preschool children was 37.21 (±3.99) mm. MMO in 3- to 5-year-old preschool children increased with age and was correlated with weight and MW.

Heterotrimeric G protein beta1gamma2 subunits change orientation upon complex formation with G protein-coupled receptor kinase 2 (GRK2) on a model membrane.

Few experimental techniques can assess the orientation of peripheral membrane proteins in their native environment. Sum Frequency Generation (SFG) vibrational spectroscopy was applied to study the formation of the complex between G protein-coupled receptor (GPCR) kinase 2 (GRK2) and heterotrimeric G protein ß(1)γ(2) subunits (Gßγ) at a lipid bilayer, without any exogenous labels. The most likely membrane orientation of the GRK2-Gßγ complex differs from that predicted from the known protein crystal structure, and positions the predicted receptor docking site of GRK2 such that it would more optimally interact with GPCRs. Gßγ also appears to change its orientation after binding to GRK2. The developed methodology is widely applicable for the study of other membrane proteins in situ.

Core decompression in combination with nano-hydroxyapatite/polyamide 66 rod for the treatment of osteonecrosis of the femoral head.

BACKGROUND: The aim of this study was to investigate the effectiveness of core decompression in combination with a nano-hydroxyapatite/polyamide 66 (n-HA/PA66) rod and a porous bioglass bone graft for the treatment of osteonecrosis of the femoral head (ONFH). METHODS: Sixty-four patients (84 hips) with ONFH were allocated to a program of either core decompression (CD) in combination with a n-HA/PA66 rod and a porous bioglass bone graft (treatment group) or CD with an autologous cancellous bone graft (control group). Clinical and radiographic retrospective follow-ups were performed on all patients with the prospectively collected data. RESULTS: The overall clinical failure rate in the treatment group (9/38, 23.68%) was lower than that of the control group (24/46, 52.17%) (p < 0.05). Harris hip scores (HHS) were significantly increased in both groups post-surgery (p < 0.05). There was a significant difference between the two groups on HHS improvement for Steinberg IIC and IIIA (p < 0.05 and p < 0.001, respectively). The visual analogue scale (VAS) was significantly decreased in both groups post-surgery (p < 0.05). Especially, significant difference in the VAS improvement was observed between the groups for IIB, IIC and IIIA (p < 0.05, p < 0.05 and p < 0.01, respectively). CONCLUSIONS: Core decompression combined with the implantation of a n-HA/PA66 rod and a bioglass bone graft can significantly decrease hip pain, improve hip function, and prevent the collapse of the femoral head in patients with ONFH. As the effectiveness of this approach appears to vary with Steinberg stage, we suggest that this treatment procedure may be suitable for patients with early to middle stage ONFH.

Sponge-like porous polyvinyl alcohol/chitosan-based hydrogel with integrated cushioning, pH-indicating and antibacterial functions.

Developing a packaging material with integrated cushioning, intelligent and active functions is highly desired but remains challenging in the food industry. Here we show that a sponge-like porous hydrogel with pH-indicating and antibacterial additives can meet this requirement. We use polyvinyl alcohol and chitosan as the primary polymers to construct a hydrogel with hierarchical structures through a freeze-casting method in combination with salting-out treatment. The synergy of aggregated polymer chains and the sponge-like porous structure makes the hydrogel resilient and efficient in energy absorption. It also enables rapid movement of molecules/particles and fast reaction due to the large specific surface area of the pore structures and the large amount of free water in it, leading to a sensitive pH-indicating function. The hydrogel shows an obvious color variation within a wide pH range in 3 min. The silver nanoparticles are fixed in the dense polymer networks, enabling a lasting release of silver ions. The porous structure makes the silver ion reach the protected item in a short time, achieving an antibacterial effect against S. aureus and E. coli with little cytotoxicity. This work paves the way for fabricating multifunctional hydrogels for diverse advanced packaging systems.

Biotribological properties of 3D printed high-oriented short carbon fiber reinforced polymer composites for artificial joints.

Short carbon fiber (SCF) reinforced polymer composites are expected to possess outstanding biotribological and mechanical properties in certain direction, while the non-oriented SCF weakens its reinforcing effect in the matrix. In this work, high-oriented SCF was achieved during nozzle extrusion, and then SCF reinforced polyether-ether-ketone (PEEK) composites were fabricated by fused deposition modeling (FDM). The concrete orientation process of SCF was theoretically simulated, and significant shear stress difference was generated at both ends of SCF. As a result, the SCF was distributed in the matrix in a hierarchical structure, containing surface layer I, II and core layer. Moreover, the SCF was oriented highly along the printing direction and demonstrated a more competitive orientation distribution compared to other studies. The SCF/PEEK composites showed a considerable improvement in wear resistance by 44 % due to self-lubricating and load-bearing capability of SCF. Besides, it demonstrated enhancements in Brinell hardness, compressive and impact strength by 48.52 %, 16.42 % and 53.64 %, respectively. In addition, SCF/PEEK composites also showed good cytocompatibility. The findings gained herein are useful for developing the high-oriented SCF reinforced polymer composites with superior biotribological and mechanical properties for artificial joints.

Altered plasma and brain disposition of isopropylidene shikimic acid liposome in rats and the brain protection in cerebral ischemia-reperfusion.

CONTEXT: Cerebral ischemia-reperfusion (I/R) injury is a secondary injury caused by oxidative stresses and inflammatory responses after recovery from cerebral ischemia. Brain protective drugs were used to reduce the injury. In order to improve the distribution in brain and enhance the brain-protective efficacy, some pharmaceutical technologies were used to achieve brain targeting delivery. OBJECTIVE: To investigate the physiological disposition of ISA liposome, and provide references for the further study about high-efficacy brain-protective preparations for I/R injury. MATERIALS AND METHODS: Comparative studies were carried out. The pharmacodynamics in t-MCAO model rats were studied first, and then the pharmacokinetics and brain distribution of the two preparations were determined. RESULTS: At the same dose, the efficacy of ISA liposome was better (P < 0.05). The efficacy was dose dependent, with significant difference of 20 mg/kg (P < 0.01) and indistinctive difference of 10 mg/kg (P = 0.22), compared with vehicle-treated rats. The parameters, T(1/2ß), MRT and AUC were different significantly between the two preparations. The enhancement of brain distribution for ISA in the liposome was obvious, with the maximum concentration 7.18 µg/g, while close to zero for the solution group. DISCUSSION AND CONCLUSION: ISA liposome could increase the distribution in brain and enhance the efficacy significantly. The results revealed that the liposomal DDS was potential as a novel strategy for the treatment of cerebral I/R injury. In addition, further targeted modification, such as PEG-modified liposomes, which possess a long circulating property in the bloodstream, would further improve the targeting delivery to the brain and lead to more significant efficacy.

Fine Structure of the Mouthparts of Three Tomicus Beetles Co-Infecting Pinus yunnanensis in Southwestern China with Some Functional Comments.

Tomicus yunnanensis, T. brevipilosus, and T. minor are the most economically significant pests of Pinus yunnanensis in Southwestern China. Chemical and physical factors play critical roles in diverse biological activities. Here, we describe the fine structure of the adult mouthparts of these three Tomicus species using scanning and transmission electron microscopy. We identified three types of mandibular shapes, which determine their biomechanical properties, their ability to process food, and their preferred foraging locations on tree trunks. Eleven types of sensilla were discernible, including sensilla basiconica (Sb.1-2), sensilla twig basiconica (Stb.1-3), sensilla coeloconica (Sco), sensilla chaetica (Sch.1-2), sensilla trichoidea (Str.1-2), and sensilla digitiformia (Sdi). Each basiconic sensillum occurs on the palpal tips and is innervated by 2-6 dendrites. Sb.1 are gustatory receptors, Sb.2 are olfactory receptors, and the three other sensilla have dual taste and mechanical functions. Sco, Sch, and Str are mechanoreceptors. Sdi are mechanical vibration receptions, given that they are innervated by one dendrite with numerous dendritic branches into the nonporous cuticle. No significant differences among the sexes or species were identified; however, intraspecific variability in the number of Stb.3 and Sdi sensilla was evident. These results will aid future studies of Tomicus beetle behaviors.

Solvent-free preparation of thermoplastic bio-materials from microcrystalline cellulose (MCC) through reactive extrusion.

Cellulose, as a renewable biopolymer, was acknowledged as a promising alternative for petroleum polymer. However, the poor thermoplasticity of cellulose caused a limitation in its full development. Herein, a solvent-free and simple strategy was proposed for the preparation of thermoplastic bio-materials from microcrystalline cellulose (MCC). Kraft lignin (KL) was employed as a plasticizer in this work. It was demonstrated that MCC-based materials with great thermoplasticity and mechanical properties could be successfully prepared by reactive extrusion. The obtained MCC-based material ML8G (with 50 wt% KL adding) possessed great thermostability and thermoplastic properties with an obvious glass transition temperature (Tg) at 106 °C. In addition, the bending strength, flexural modulus and storage modulus of the MCC-based material were improved to 20.44 MPa, 3139.47 MPa and 5.81 GPa respectively. Furthermore, the obtained MCC-based material exhibited good water stability and biodegradability. The comprehensive results confirmed the feasibility of MCC-based materials plasticized with KL through reactive extrusion. Overall, this work was a promising development in the field of bio-plastic utilization of natural products from a green source.

[Effectiveness of shape memory alloy embracing device in treatment of Vancouver B2 periprosthetic femoral fracture].

Objective: To analyze the effectiveness of shape memory alloy embracing device in the treatment of Vancouver B2 periprosthetic femoral fracture after primary hip arthroplasty. Methods: The clinical data of 30 patients (30 hips) with Vancouver B2 periprosthetic femoral fracture after primary hip arthroplasty between January 2019 and January 2021 were analyzed retrospectively. Among them, 15 cases were treated with shape memory alloy embracing device for fracture fixation (group A) and 15 cases with titanium cable cerclage (group B). There was no significant difference in general data such as gender, age, body mass index, the cause of primary arthroplasty and surgical method, prosthesis type, the cause and side of femoral fracture, the time from injury to operation, and comorbidities between the two groups ( P>0.05). The operation time, intraoperative blood loss, and hospital stay of the two groups were recorded. The fracture healing was examined by X-ray film, and the hip joint function was evaluated by Harris score. Results: The operations in both groups were completed successfully, and the incisions healed by first intention after operation with no vascular or nerve injury. The operation time and hospital stay in group A were significantly shorter than those in group B ( P<0.05), but there was no significant difference in intraoperative blood loss between group A and group B ( t=-0.518， P=0.609). Patients were followed up 12-20 months (mean, 16.3 months) in group A and 12-22 months (mean, 16.7 months) in group B. X-ray film showed that all fractures healed, the healing time was (14.73±2.05) weeks in group A and (17.27±2.60) weeks in group B, and there was a significant difference between the two groups ( t=-2.960， P=0.006). During follow-up, there was no complication such as prosthesis loosening, periprosthetic infection, joint stiffness, or internal fixator loosening. The Harris score of group A was significantly better than that of group B at 3, 6, and 12 months after operation ( P<0.05). Conclusion: Compared with titanium cable cerclage, using shape memory alloy embracing device to fix Vancouver B2 periprosthetic femoral fracture can accelerate fracture healing, shorten operation time, and reduce intraoperative blood loss. Patients can perform functional exercise earlier and restore joint function better.

Assessment of dental personal protective equipment (PPE) and the relationship between manual dexterity and dissemination of aerosol and splatter during the COVID-19 pandemic.

Background/purpose: Asymptomatic COVID-19 patients visit the dental clinic for routine treatment, during which, high-speed handpieces, and third-use sprayers can produce aerosols. We focused on the effect and possible inadequacy of personal protective equipment (PPE) while cleaning teeth and assessed whether doctors' proficiency was related to the range of spraying droplets. Materials and methods: Doctors were divided into three different groups: attending physicians, residents, and intern respectively. Each doctor treated 15 patients; each group comprised 30 patients. The dentists wore leg covers, shoe covers, medical masks, haircaps, full masks, waterproof barrier gowns, and gloves. Each patient was covered with a waterproof hole towel, and the upper edge was fixed to the patient's nose with a medical tape. After cleaning the teeth with water contained red pigment, the spattering distance and range of droplets were calculated. Concurrently, we examined whether there was any droplet contamination on the PPE. Results: With the exception of shoe covers, haircaps, and medical surgical masks, pigment splash marks were found on both the dentist and assistant's PPE. The interns performed cleaning for a significantly longer time than the residents and attending physicians, with a significant statistical difference (P < 0.05). The spatter distance for the interns was significantly larger than the residents (P < 0.05). Conclusion: It is recommended that the hole towel be centered on the patient's nose tip, at least larger than a radius of 54.9-64.5 cm. The dentist's proficiency did cause differences in the duration of teeth cleaning, which further affects the spatter distance.

Microplastics: A tissue-specific threat to microbial community and biomarkers of discus fish (Symphysodon aequifasciatus).

As detriments in aquatic environments, microplastics (MPs) have been commonly studied on organisms, but tissue-scale effects of MPs were poorly understood. Discus fish (Symphysodon aequifasciatus), herewith, were exposed to polystyrene MPs (0/20/200 µg/L) for 28 d. We found that MPs significantly inhibited growth performance. MPs were observed in skin, gill and intestine after 14/28-d exposure. MPs bioaccumulation was independent of exposure time, but increased with MPs concentrations. Microbial community diversity of fish gill, but not skin and intestine, in MPs treatments was significantly increased. Bacterial community of MP-treated skin and gill were obviously separated from control. Skin dominant phyla changed from Actinobacteriota to Proteobacteria and Firmicutes. Proteobacteria gradually occupied dominance in gill after exposure. Furthermore, MPs-induced skin oxidative stress was demonstrated by the activation of superoxide dismutase and catalase. Skin malondialdehyde also increased and showed significant correlations with four bacterial phyla, e.g., Proteobacteria. Gill Na+/K+-ATPase activity decreased, strongly correlating to microbial community changes caused by MPs. Intestinal digestive enzymes activity (pepsin, lipase and α-amylase) reduced, revealing correlation with bacterial community especially Fibrobacterota. These results suggest a tissue-specific effect of MPs to microbial community and biomarkers in aquatic organism.

Membrane orientation of MSI-78 measured by sum frequency generation vibrational spectroscopy.

Antimicrobial peptides (AMPs) selectively disrupt bacterial cell membranes to kill bacteria whereas they either do not or weakly interact with mammalian cells. The orientations of AMPs in lipid bilayers mimicking bacterial and mammalian cell membranes are related to their antimicrobial activity and selectivity. To understand the role of AMP-lipid interactions in the functional properties of AMPs better, we determined the membrane orientation of an AMP (MSI-78 or pexiganan) in various model membranes using sum frequency generation (SFG) vibrational spectroscopy. A solid-supported single 1,2-dipalmitoyl-an-glycero-3-[phospho-rac-(1-glycerol)] (DPPG) bilayer or 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG) bilayer was used as a model bacterial cell membrane. A supported 1,2-dipalmitoyl-an-glycero-3-phosphocholine (DPPC) bilayer or a 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) bilayer was used as a model mammalian cell membrane. Our SFG results indicate that the helical MSI-78 molecules are associated with the bilayer surface with ∼70° deviation from the bilayer normal in the negatively charged gel-phase DPPG bilayer at 400 nM peptide concentration. However, when the concentration was increased to 600 nM, MSI-78 molecules changed their orientation to make a 25° tilt from the lipid bilayer normal whereas multiple orientations were observed for an even higher peptide concentration in agreement with toroidal-type pore formation as reported in a previous solid-state NMR study. In contrary, no interaction between MSI-78 and a zwitterionic DPPC bilayer was observed even at a much higher peptide concentration (∼12,000 nM). These results demonstrate that SFG can provide insights into the antibacterial activity and selectivity of MSI-78. Interestingly, the peptide exhibits a concentration-dependent membrane orientation in the lamellar-phase POPG bilayer and was also found to induce toroidal-type pore formation. The deduced lipid flip-flop from SFG signals observed from lipids also supports MSI-78-induced toroidal-type pore formation.

Lignocellulose-based free-standing hybrid electrode with natural vessels-retained, hierarchically pores-constructed and active materials-loaded for high-performance hybrid oxide supercapacitor.

Lignocellulose including cellulose, lignin, and hemicellulose could be extracted from wood, and has been used to prepare carbon electrode. However, complicated extraction greatly increases preparation cost. To achieve maximum utilization of lignocellulose and avoid complicated extraction, wood with porous structure and good mechanical strength is used as carbon precursor. Additionally, chemical activation is commonly used to create micropores to provide high capacitance, but it brings in natural structure destruction, and generation of wastewater during pickling. Moreover, to achieve desirable energy density, multi-step strategy with long duration is required for loading active materials on carbonized lignocellulose (CL). Herein, a one-step method is developed to prepare a free-standing hybrid CL electrode (CLE) by using Lewis acid in three aspects: (1) as structure protection agent, (2) as activating agent, (3) as active materials donor, which bypasses pickling and further avoids the generation of wastewater. Additionally, natural vessels in wood can not only provide large space for active materials loading, but also act as rapid ions diffusion way, simultaneously confining active materials detachment. Benefiting from the synergistic effect of porous structure and Lewis acid, this work not only makes full utilization of lignocellulose, but also makes CLE exhibit excellent performance in hybrid oxide supercapacitor.

[Accuracy of implantation between two immediate implantation methods in mandibular molars].

PURPOSE: To compare the accuracy of implant placement between modified and traditional immediate implant placement in mandibular molar regions. METHODS: Twenty-four patients were selected for immediate implantation in the molar area including 24 implantation sites. Preoperative cone-beam CT(CBCT) was conducted and then digital software Simplant 18.0 was used to design the ideal three-dimensional position of the implants. In the experimental group, the implant socket was prepared first according to reference of the remaining natural teeth, then the implant was implanted after minimally invasive extraction. Twelve patients in the control group underwent immediate implantation by traditional immediate implant procedures. Minimally invasive extraction, then socket preparation, and final implanting were performed. All patients underwent CBCT after surgery. Implant sites designed prior to surgery and actual implant sites differences between modified and traditional immediate implant placement were measured by Simplant 18.0 and compared with SPSS 17.0 software package. RESULTS: In the experimental group and control group, the measured average deviation were as follows, the angle was (4.492±0.912)° and (7.255±1.307)°, respectively; The horizontal error of the implant shoulder was (0.379±0.083) mm and (1.229±0.270) mm, respectively; The measuring horizontal error of the implant apex was (1.263±0.267) mm and (2.183±0.264) mm, respectively; The calculative horizontal error of the implant apex was (1.324±0.203) mm and (2.709±0.383) mm, respectively; Depth error of the implant apex was (0.663±0.123) mm and (1.533±0.155) mm, respectively, which were significantly lower than those of the control group. CONCLUSIONS: Compared with the traditional method, modified immediate implantation can improve the accuracy of implantation in mandibular molars.