Data-driven discovery of a universal indicator for metallic glass forming ability.

Despite the importance of glass forming ability as a major alloy characteristic, it is poorly understood and its quantification has been experimentally laborious and computationally challenging. Here, we uncover that the glass forming ability of an alloy is represented in its amorphous structure far away from equilibrium, which can be exposed by conventional X-ray diffraction. Specifically, we fabricated roughly 5,700 alloys from 12 alloy systems and characterized the full-width at half-maximum, Δq, of the first diffraction peak in the X-ray diffraction pattern. A strong correlation between high glass forming ability and a large Δq was found. This correlation indicates that a large dispersion of structural units comprising the amorphous structure is the universal indicator for high metallic glass formation. When paired with combinatorial synthesis, the correlation enhances throughput by up to 100 times compared to today's state-of-the-art combinatorial methods and will facilitate the discovery of bulk metallic glasses.

A General Strategy of Aerolysin Nanopore Detection for Oligonucleotides with the Secondary Structure.

An aerolysin nanopore is employed as a sensitive tool for single-molecule analysis of short oligonucleotides (≤10 nucleotides), poly(ethylene glycol) (PEGs), peptides, and proteins. However, the direct analysis of long oligonucleotides with the secondary structure (e.g., G-quadruplex topology) remains a challenge, which impedes the further practical applications of the aerolysin nanopore. Here, a simple and applicable method of aerolysin nanopore is presented to achieve a direct analysis of structured oligonucleotides that are extended to 30 nucleotides long by a cation-regulation mechanism. By regulating the cation type in electrolyte solution, the structured oligonucleotides are unfolded into linear form which ensures the successive translocation. The results show that each model oligonucleotide of 5'-(TTAGGG)n -3' can produce a well-resolved current blockade in its unfolded solution of MgCl2 . The length between 6 and 30 nucleotides long of model oligonucleotides is proportional to the duration time, showing a translocation velocity as low as 0.70-0.13 ms nt-1 at +140 mV. This method exhibits an excellent sensitivity and a sufficient temporal resolution, provides insight into the aerolysin nanopore methodology for genetic and epigenetic biosensing, making aerolysin applicable in practical diagnosing with long and structured nucleic acids.

Oolong tea: A critical review of processing methods, chemical composition, health effects, and risk.

Oolong tea (OT) is a traditional Chinese tea (Camellia sinensis) and is especially popular in south China. This review is to comprehensively summarize the miscellaneous research that has been done towards to the processing, phytochemistry, health benefit, and risk of OT. These literatures were carried out not only from different electronic databases but also from text books written in English, Japanese, and Chinese, including those traditional records tracing back to the Tang Dynasty (A.D. 618-907). The full process OT producing is depicted below in this review. The phytochemistry of OT has been comprehensively investigated. More than 100 chemical compositions have been isolated and identified. In health benefit, OT performs outstandingly in reducing obesity and controlling diabetes explained by modern pharmacological studies. (-)-Epigallocatechin-3-gallate (6) in OT prevention of cancerous cells developing. OT can also improve and reduce on heart and vascular disease, protect teeth and bone, function as anti-oxidative and antibacterial agents. This review also mentioned the risk, summarized briefly on various forms of toxicity and harmful associated with OT. In short, this review can provided a natural product library of OT, gave inspirations for further new garden systems, designed idea on quality, bioactivity-oriented screening. In addition, it is suggested more scientists and education is necessary to guarantee the stability and safety of drinking OT.

A novel in situ strategy for the preparation of a ß-cyclodextrin/polydopamine-coated capillary column for capillary electrochromatography enantioseparations.

Inspired by the chiral recognition ability of ß-cyclodextrin and the natural adhesive properties of polydopamine under alkaline conditions, in this study, a rapid and in situ modification strategy was developed to fabricate ß-cyclodextrin/polydopamine composite material coated-capillary columns for open tubular capillary electrochromatography. The results of scanning electron microscopy, FTIR spectroscopy, streaming potential, and electro-osmotic flow studies indicated that ß-cyclodextrin/polydopamine was successfully fixed on the inner wall of the capillary column. This coating can be achieved within 1 h affording a greatly reduced capillary preparation time. The performance of the ß-cyclodextrin/polydopamine-coated capillary was validated by the analysis of seven pairs of chiral analytes, namely epinephrine, norepinephrine, isoprenaline, terbutaline, verapamil, tryptophane, carvedilol. Good enantioseparation efficiencies were achieved for all. For three consecutive runs, the relative standard deviations for the migration times of the analytes for intraday, interday, and column-to-column repeatability were in the range of 0.41-1.74, 1.03-4.18, and 1.66-8.24%, respectively. Moreover, the separation efficiency of the ß-cyclodextrin/polydopamine-coated capillary column did not decrease obviously over 90 runs. The strategy should also be feasible to introduce and immobilize other chiral selectors on the inner walls surface of capillary columns.

A Two-Stage Dissociation System for Multilayer Imaging of Cancer Biomarker-Synergic Networks in Single Cells.

The monitoring of cancer biomarkers is crucial to the early detection of cancer. However, a limiting factor in biomarker analysis is the ability to obtain the multilayered information of various biomarker molecules located at different parts of cells from the plasma membrane to the cytoplasm. A two-stage dissociation nanoparticle system based on multifunctionalized polydopamine-coated gold nanoparticles (Au@PDA NPs) is reported, which allows for the two-stage imaging of cancer biomarkers in single cells. We demonstrate the feasibility of this strategy on sialic acids (SAs), p53 protein, and microRNA-21 (miRNA-21) in MCF-7 breast cancer cells by two custom-built probes. Furthermore, the multicolor fluorescence information extracted is used for the monitoring of biomarker expression changes under different drug combinations, which allows us to investigate the complex interactions between various cancer biomarkers and to describe the cancer biomarker-synergic networks in single cells.

Efficient Inhibition of Ovarian Cancer by Gelonin Toxin Gene Delivered by Biodegradable Cationic Heparin-polyethyleneimine Nanogels.

The use of toxins for cancer therapy has great promise. Gelonin, a potent plant toxin, causes cell death by inactivating the 60S ribosomal subunit. Recently, we developed a novel gene delivery system using biodegradable cationic heparin-polyethyleneimine (HPEI) nanogels. In the current study, the antitumor activity of a recombinant plasmid expressing gelonin (pGelonin) on human ovarian cancer was assessed. The application of HPEI nanogels, was also evaluated. Gelonin-cDNA was cloned into the pVAX1 plasmid vector and transfected into SKOV3 human ovarian cancer cells using biodegradable cationic HPEI nanogels. The expression of gelonin in vitro and in vivo was confirmed using RT-PCR and western blot analysis. Cell viability and apoptosis were examined using an MTT assay and flow cytometric analysis. For the in vivo study, an SKOV3 intraperitoneal ovarian carcinomatosis model was established, and nude mice were randomly assigned into four groups receiving i.p. administration of pGelonin/HPEI complexes, pVAX/HPEI complexes, HPEI alone and 5% glucose solution. The tumor weight was monitored, and a TUNEL assay and Ki-67 immunohistochemistry were performed to evaluate apoptosis and cell proliferation in the tumor tissue sections, respectively. Gelonin was efficiently expressed in SKOV3 cancer cells in vitro and in vivo using pGelonin incorporated with HPEI nanogels. The pGelonin/HPEI complexes inhibited cell viability and induced apoptosis in the cell culture. Treatment for intraperitoneal carcinomatosis with pGelonin/HPEI complexes reduced the tumor weight by ~58.55% compared to the control groups (P<0.05). The antitumor effect was accompanied by increased apoptosis and reduced cell proliferation (P<0.05). No significant side effects were observed with i.p. administration of the pGelonin/HPEI complexes. Our data indicate that HPEI nanogel-delivered pGelonin may have promising applications against human ovarian cancer.

Enhanced resolution of low molecular weight poly(ethylene glycol) in nanopore analysis.

A design with conjugation of DNA hairpin structure to the poly(ethylene glycol) molecule was presented to enhance the temporal resolution of low molecular weight poly(ethylene glycol) in nanopore studies. By the virtue of this design, detection of an individual PEG with molecular weight as low as 140 Da was achieved at the single-molecule level in solution, which provides a novel strategy for characterization of an individual small molecule within a nanopore. Furthermore, we found that the current duration time of poly(ethylene glycol) was scaled with the relative molecular weight, which has a potential application in single-molecule detection.

Fluorescence turn-on detection of Sn2+ in live eukaryotic and prokaryotic cells.

Sn(2+) is usually added to toothpaste to prevent dental plaque and oral disease. However, studies of its physiological role and bacteriostatic mechanism are restricted by the lack of versatile Sn(2+) detection methods applicable to live cells, including Streptococcus mutans. Here we report two Sn(2+) fluorescent probes containing a rhodamine B derivative as a fluorophore, linked via the amide moiety to N,N-bis(2-hydroxyethyl)ethylenediamine (R1) and tert-butyl carbazate group (R2), respectively. These probes can selectively chelate Sn(2+) and show marked fluorescence enhancement due to the ring open reaction of rhodamine induced by Sn(2+) chelation. The probes have high sensitivity and selectivity for Sn(2+) in the presence of various relevant metal ions. Particularly, both R1 and R2 can target lysosomes, and R2 can probe Sn concentrations in lysosomes with rather acidic microenvironment. Furthermore, these two probes have low toxicity and can be used as imaging probes for monitoring Sn(2+) not only in live KB cells (eukaryotic) but also in Streptococcus mutans cells (prokaryotic), which is a useful tool to study the physiological function of Sn(2+) in biological systems.

Exploring the impact of culture techniques and patient demographics on the success rate of primary culture of human periodontal ligament stem cells.

Background/purpose: Periodontal ligament stem cells (PDLSCs) have the potential for regenerating periodontal tissue. The study aims to investigate the impact of demographics (ages, gender, disease) and culture techniques (shipping storage time and culture method) on the success of primary culture. Materials and methods: PDLSCs were collected from 51 teeth of 26 patients and cultured via outgrowth (OG) and enzymatic digestion (ED) methods. Cells characteristics were confirmed by flow cytometry, MTT, and ARS. The primary culture success rate was evaluated with a serial chi-square test to determine the relationship with culture technique (ED/OG and ≤4 h/prolonged culture) and patient demographics (Young/Old, Female/Male, and Health/Periodontitis). Results: The overall success rate of Health group (69.7%) was higher than Periodontitis (38.9%). Culturing within 4 h possessed a higher success rate (71.8%) than prolonged group (16.7%) regardless of patient demographics, and using OG method (81.5%) revealed more promising. Subgroup analysis of 39 cases (culture within 4 h) found that the success rate of OG was higher than ED in the Old group (87.5%-25.0%) and in the Periodontitis group (83.3%-25.0%). Conclusion: Primary culturing of PDLSCs within 4 h and using the outgrowth method led to higher success rates regardless of patient demographics. It can achieve successful PDLSCs culture of older patients or patients with periodontal disease by appropriate culture technique.

A new self-microemulsifying mouth dissolving film to improve the oral bioavailability of poorly water soluble drugs.

A new self-microemulsifying mouth dissolving film (SMMDF) for poorly water-soluble drugs such as indomethacin was developed by incorporating self-microemulsifying components with solid carriers mainly containing microcrystalline cellulose, low-substituted hydroxypropyl cellulose and hypromellose. The uniformity of dosage units of the preparation was acceptable according to the criteria of Chinese Pharmacopoeia 2010. The SMMDF was disintegrated within 20 s after immersion into water, released completely at 5 min in the dissolution medium and achieved microemulsion particle size of 28.81 ± 3.26 nm, which was similar to that of liquid self- microemulsifying drug delivery system (SMEDDS). Solid state characterization of the SMMDF was performed by SEM, DSC and X-ray powder diffraction. Results demonstrated that indomethacin in the SMMDF was in the amorphous state, which might be due to self-microemulsifying ingredients. Pharmacokinetic parameters in rats including T(max), C(max), AUC were similar between the SMMDF and liquid SMEDDS. AUC and C(max) from the SMMDF were significantly higher than those from the common mouth dissolving film or the conventional tablet, and Tmax from SMMDF group was also significantly decreased. These findings suggest that the SMMDF is a new promising dosage form, showing notable characteristics of convenience, quick onset of action and enhanced oral bioavailability of poorly water-soluble drugs.

Effects of spray-drying and choice of solid carriers on concentrations of Labrasol® and Transcutol® in solid self-microemulsifying drug delivery systems (SMEDDS).

Solid self-microemulsifying drug delivery systems (SMEDDS) have been used increasingly for improving the bioavailability of hydrophobic drugs. Labrasol® and Transcutol® are used widely as surfactant and solubilizer in the formulation of solid SMEDDS. We investigated the effects of spray-drying and the use of different solid carriers on concentrations of Labrasol® and Transcutol® in solid SMEDDS with scutellarin as the formulated drug. Liquid and gas chromatography tandem mass spectrometry (LC-MS and GC-MS) methods were developed for measuring low concentrations of Labrasol® and Transcutol®. In the preparation of solid SMEDDS, lactose, hydroxypropylmethyl cellulose (HPMC) and microcrystalline cellulose (MCC) were used as solid carriers. Judging from the retention ratios of Labrasol® and Transcutol®, the droplet size of solid SMEDDS increased after spray-drying of liquid SMEDDS, and concentrations of these excipients decreased after the solidifying procedure. In such reduction, Lactose and HPMC were found to preserve Labrasol® and Transcutol® better than MCC during spray-drying, and the resultant droplet sizes were smaller than that of MCC. Labrasol® and Transcutol® showed good thermal stability at 60 °C degree for 10 days. It can be concluded that spray-drying could increase the droplet size of solid SMEDDS and decreased the concentration of Labrasol® and Transcutol® therein, while water-soluble solid carriers could preserve Labrasol® and Transcutol® better than insoluble carriers in the solid SMEDDS.

[Mechanisms of hydroxypropyl methylcellulose for the precipitation inhibitor of supersaturatable self-emulsifying drug delivery systems].

Hydroxypropyl methylcellulose (HPMC) propels self-emulsifying drug delivery systems (SEDDS) to achieve the supersaturated state in gastrointestinal tract, which possesses important significance to enhance oral absorption for poorly water-soluble drugs. This study investigated capacities and mechanisms of HPMC with different viscosities (K4M, K15M and K100M) to inhibit drug precipitation of SEDDS in the simulated gastrointestinal tract environment in vitro. The results showed that HPMC inhibited drug precipitation during the dispersion of SEDDS under gastric conditions by inhibiting the formation of crystal nucleus and the growth of crystals. HPMC had evident effects on the rate of SEDDS lipolysis and benefited the distribution of drug molecules across into the aqueous phase and the decrease of drug sediment. The mechanisms were related to the formed network of HPMC and its viscosities and molecular weight. These results offered a reference for selecting appropriate type of HPMC as the precipitation inhibitor of supersaturatable SEDDS.

Dual-Step Controlled Release of Berberine Hydrochloride from the Trans-Scale Hybrids of Nanofibers and Microparticles.

In this nano era, nanomaterials and nanostructures are popular in developing novel functional materials. However, the combinations of materials at micro and macro scales can open new routes for developing novel trans-scale products with improved or even new functional performances. In this work, a brand-new hybrid, containing both nanofibers and microparticles, was fabricated using a sequential electrohydrodynamic atomization (EHDA) process. Firstly, the microparticles loaded with drug (berberine hydrochloride, BH) molecules in the cellulose acetate (CA) were fabricated using a solution electrospraying process. Later, these microparticles were suspended into a co-dissolved solution that contained BH and a hydrophilic polymer (polypyrrolidone, PVP) and were co-electrospun into the nanofiber/microparticle hybrids. The EHDA processes were recorded, and the resultant trans-scale products showed a typical hybrid topography, with microparticles distributed all over the nanofibers, which was demonstrated by SEM assessments. FTIR and XRD demonstrated that the components within the hybrids were presented in an amorphous state and had fine compatibility with each other. In vitro dissolution tests verified that the hybrids were able to provide the designed dual-step drug release profiles, a combination of the fast release step of BH from the hydrophilic PVP nanofibers through an erosion mechanism and the sustained release step of BH from the insoluble CA microparticles via a typical Fickian diffusion mechanism. The present protocols pave a new way for developing trans-scale functional materials.

Collagen Scaffolds Laden with Human Periodontal Ligament Fibroblasts Promote Periodontal Regeneration in SD Rat Model.

Periodontitis, a chronic inflammatory disease caused by microbial communities carrying pathogens, leads to the loss of tooth-supporting tissues and is a significant contributor to tooth loss. This study aims to develop a novel injectable cell-laden hydrogel consisted of collagen (COL), riboflavin, and a dental light-emitting diode (LED) photo-cross-linking process for periodontal regeneration. Utilizing α-SMA and ALP immunofluorescence markers, we confirmed the differentiation of human periodontal ligament fibroblasts (HPLFs) into myofibroblasts and preosteoblasts within collagen scaffolds in vitro. Twenty-four rats with three-wall artificial periodontal defects were divided into four groups, Blank, COL_LED, COL_HPLF, and COL_HPLF_LED, and histomorphometrically assessed after 6 weeks. Notably, the COL_HPLF_LED group showed less relative epithelial downgrowth (p < 0.01 for Blank, p < 0.05 for COL_LED and COL_HPLF), and the relative residual bone defect was significantly reduced in the COL_HPLF_LED group compared to the Blank and the COL_LED group (p < 0.05). The results indicated that LED photo-cross-linking collagen scaffolds possess sufficient strength to withstand the forces of surgical process and biting, providing support for HPLF cells embedded within them. The secretion of cells is suggested to promote the repair of adjacent tissues, including well-oriented periodontal ligament and alveolar bone regeneration. The approach developed in this study demonstrates clinical feasibility and holds promise for achieving both functional and structural regeneration of periodontal defects.

Effect of ion adsorption on CEC separation of small molecules using hypercrosslinked porous polymer monolithic capillary columns.

Both poly(styrene-co-vinylbenzyl chloride-co-divinylbenzene) and poly(4-methylstyrene-co-vinylbenzyl chloride-co-divinylbenzene) monolithic columns have been hypercrosslinked and for the first time used to achieve capillary electrochromatographic separations. Although these columns do not contain ionizable functionalities, electroosmotic flow was observed due to adsorption of ions from a buffer solution contained in the mobile phase on the surface of the hydrophobic polymer. An increase of more than one order of magnitude was observed with the use of both monolithic polymers. The hypercrosslinking reaction creates a large surface area thus enabling adsorption of a much larger number of ions. Alkylbenzenes were successfully separated using the hypercrosslinked monolithic columns.

The influence of membrane molecular weight cutoff on a novel bioartificial liver.

Given the xenogeneic immune reaction relevant to the molecular weight cutoff of the membrane of a bioartificial liver (BAL) system, we investigated the influence of membrane molecular weight cutoff in our BAL system in this study. Acute liver failure in beagles was induced by d-galactosamine administration. Eight beagles were divided into two groups by the membrane molecular weight cutoff of the plasma component separator. Group 1 beagles were treated with BAL containing 200 kDa retention rating membrane. Group 2 beagles were treated with BAL containing 1200 kDa retention rating membrane. Each group underwent two 6-h BAL treatments that were performed on day 1 and day 21. The hemodynamic and hematologic response, humoral immune responses, and cytotoxic immune response to BAL therapy were studied before and after treatments. All beagles remained hemodynamically and hematologically stable during BAL treatments. BAL treatment was associated with a significant decline in levels of complement; however, a longer time of level maintenance was observed in Group 2. Group 2 beagles experienced a significant increase in levels of IgG and IgM after two BAL treatments. Significant levels of canine proteins were detected in BAL medium from Group 2; only trace levels of canine proteins were detected in BAL medium from Group 1. The posttreatment viability of co-culture cells in Group 2 was lower compared with Group 1, and the viability of co-culture cells after treatments was associated with deposition of canine proteins on the cells. Xenogeneic immune response was influenced by membrane molecular weight cutoff in the BAL.

[Clinical observation on plastic splint treatment of middle clavicle fracture based on a new classification].

OBJECTIVE: According to 73 patients with middle clavicle fracture treated conservatively, a new classification of middle clavicle fracture was proposed, and the clinical effect of plastic splint in the treatment of middle clavicle fracture was observed. METHODS: Total 73 patients with middle clavicle fracture treated with plastic splint from September 2018 to August 2020 were analyzed retrospectively. All the patients were divided into 4 types according to the degree of fracture displacement. There were 16 cases of typeⅠ, including 7 males and 9 females, ranging in age from 18 to 37 years old, with a mean of (28.6±7.8) years old;12 cases of mild disease, 3 cases of moderate disease and 1 case of severe disease. There were 16 cases of type Ⅱ, including 6 males and 10 females, ranging in age from 25 to 49 years old, with a mean of (37.3±9.4) years old;5 cases of mild disease, 8 cases of moderate disease and 3 cases of severe disease. There were 7 cases of type Ⅲ, including 4 males and 3 females, ranging in age from 33 to 57 years old;2 cases of mild disease, 3 cases of moderate disease and 2 cases of severe disease. There were 34 cases of type Ⅳ, including 16 males and 18 females, ranging in age from 48 to 82 years old, with a mean of(66.4±14.9) years old;7 cases of mild disease, 17 cases of moderate disease and 10 cases of severe disease. All patients received plastic splint external fixation for 4 weeks. Visual analgue scale (VAS) and Constant-Murley shoulder scores before treatment and 1, 3 and 9 months after treatment were observed and recorded to evaluate the change of pain degree and shoulder function recovery before and after treatment. The patients' satisfaction with the appearance after treatment was recorded at the latest follow-up. The X-ray findings at the latest follow-up were used to judge whether the patient had fracture nonunion. And according to the fracture healing time and imaging findings, the excellent and good rate of clinical curative effect in patients with different types was obtained. RESULTS: All patients were followed up, and the duration ranged from 9 to 11 months, with a mean of (9.8±0.7) months. The VAS scores of typeⅠ, typeⅡand type Ⅳ before treatment were 2.88±0.83, 3.67±0.80 and 6.92±1.71 respectively, which were decreased to 0.54±0.19, 0.77±0.25 and 1.18±0.17 respectively after 9 months of treatment. The Constant-Murley shoulder scores of typeⅠ, typeⅡand type Ⅳ were 65.81±2.09, 63.50±2.22 and 47.93±2.91 respectively before treatment, and increased to 88.56±2.11, 85.12±2.23 and 71.25±2.16 respectively after 9 months of treatment. Five patients were not satisfied with the appearance after treatment;6 patients had no obvious continuous callus passing through after 9 months of treatment, which was fracture nonunion. CONCLUSION: The classification of middle clavicle fracture is more appropriate to the clinic, which has a certain clinical guiding significance for the selection of treatment methods and prognosis of middle clavicle fracture. Plastic splint is effective in the treatment of middle clavicle fracture without obvious displacement and overlapping displacement, and the incidence of complications is low. It can be popularized in clinic.

Peptide functionalized polydiacetylene liposomes act as a fluorescent turn-on sensor for bacterial lipopolysaccharide.

Mixed polydiacetylene (PDA) liposomes functionalized on their surface with a fluorescent pentalysine peptide derivative and histidine in a ratio of 1:9 can identify bacterial lipopolysaccharide (LPS). Upon photopolymerization of the self-assembled liposomes the initial fluorescence of the peptide-diacetylene amphiphiles is quenched. Interaction with LPS in aqueous solution or on the surface of E. coli DH5α restores the fluorescence. This increase in fluorescence is selective for LPS relative to other negatively charged analytes including nucleotides and ctDNA. This simple turn-on fluorescent sensor allows detecting LPS even at low micromolar concentrations.

Effects of membrane molecular weight cutoff on performance of a novel bioartificial liver.

Immunoisolation using semipermeable membranes has been incorporated into bioartificial liver (BAL) devices to separate cellular components of the recipient's immune system from the cells within the BAL device. This study was designed to explore the influence of membrane molecular weight cutoff on performance of the multilayer radial-flow BAL using porcine hepatocytes cocultured with mesenchymal stem cells. In this study, healthy beagles underwent 6-h treatment with a BAL containing membrane with 200 kDa retention rating or 1200 kDa retention rating. Functional markers of BAL performance were monitored before and after treatment, as well as cytotoxic immune response to BAL therapy. The results showed that hepatocyte performance levels such as albumin secretion, urea synthesis, and viability were all significantly higher in 200 kDa retention rating group compared with the 1200 kDa retention rating group after treatment (P < 0.05). Significant levels of canine proteins were detected in BAL medium from the 1200 kDa retention rating group. Fluorescence microscopy further verified that heavy deposition of canine IgG, IgM, and complement (C3) on coculture cells was obtained after BAL treatment in the 1200 kDa retention rating group. However, only trace deposits of canine immunoproteins were observed on coculture cells obtained from BAL in the 200 kDa retention rating group. Small membrane molecular weight cutoff of the BAL could reduce the transfer of xenoreactive antibodies into the BAL medium and improve the performance of the BAL.

[Optimization of novel self-microemulsifying mouth dissolving films by response surface methodology].

This paper report the development of a new dosage form - self-microemulsifying mouth dissolving films, which can improve the oral bioavailability of water insoluble drugs and have good compliance. A three factor, three-level Box-Behnken design was used for optimizing formulation, investigated the effect of amounts of microcrystalline cellulose, low-substituted hydroxypropyl cellulose and hypromellose on the weight, disintegration time, cumulative release of indomethacin after 2 min, microemulsified particle size and stretchability. Optimized self-microemulsifying mouth dissolving films could fast disintegrate in (17.09 +/- 0.72) s; obtain microemulsified particle size at (28.81 +/- 3.26) nm; and release in vitro at 2 min to (66.18 +/- 1.94)%. Self-microemulsifying mouth dissolving films with broad application prospects have good compliance, strong tensile and can be released rapidly in the mouth through fast self-microemulsifying.