Organic carbon release, denitrification performance and microbial community of solid-phase denitrification reactors using the blends of agricultural wastes and artificial polymers for the treatment of mariculture wastewater.

This paper explored the possibility of heterotrophic denitrification driven by composite solid carbon sources in low carbon/nitrogen ratio marine recirculating aquaculture wastewater. In this study, two agricultural wastes, reed straw (RS), corn cob (CC) and two artificial polymers, polycaprolactone (PCL), poly3-hydroxybutyrate-hydroxypropionate (PHBV) were mixed in a 1:1 ratio to compare the carbon release characteristics of the four composite carbon sources (RS+PCL, RS+PHBV, CC+PCL, and CC+PHBV) and their effects on improving the mariculture wastewater for denitrification. Dissolved organic carbon (DOC) after carbon source release (4.96-1.07 mg/g), total organic carbon/chemical oxygen demand (1.9-0.79) and short-chain fatty acids (SCFAs) (4.23-0.21 mg/g) showed that all the four composite solid carbon sources had excellent organic carbon release ability, and the CC+PCL group had the highest release of DOC and SCFAs. Energy-dispersive X-ray spectroscopy, scanning electron microscopy, and Fourier-transform infrared spectroscopy were used to observe the changes in the surface characteristics of the composite carbon source before and after application. And results showed that the stable internal structure enabled CC+PCL group to have continuous carbon release performance and achieved the maximum denitrification efficiency (93.32 %). The NRE results were supported by the abundance of the Proteobacteria microbial community at the phylum level and Marinobacter at the genus level. Quantitative real-time PCR (q-PCR) indicated CC-containing composite carbon source groups have good nitrate reduction ability, while PCL-containing composite carbon source groups have better nitrite reduction level. In conclusion, the carbon source for agricultural wastes and artificial polymers can be used as an economic and effective solid carbon source for denitrification and treatment of marine recirculating aquaculture wastewater.

Polypyrrole-Modified Nylon 6 Nanofibers as Adsorbent for the Extraction of Two ß-Lactam Antibiotics in Water Followed by Determination with Capillary Electrophoresis.

A solid phase membrane adsorbent-a nylon 6 nanofibers membrane coated by polypyrrole (PPy-PA6-NFsM)-was firstly synthesized and used for extraction of two ß-lactam antibiotics (oxacillin and cloxacillin) in urban river water. Then the analytes were detected by capillary electrophoresis with a diode array detector (CE-DAD). The synthesized nanofibers membrane was characterized by scanning electron microscopy and a Fourier transform infrared spectrometer. The experimental conditions were optimized, including the amount used of PPy-PA6-NFsM, pH of the sample solutions, adsorption volume, and desorption conditions. Under the optimal extraction and separation conditions, the detection limits were found to be 2.0 ng/mL for both oxacillin and cloxacillin. The proposed method was applied to the determination of the two ß-lactams in water samples of an urban river. The recoveries of these two ß-lactams were found to be in the range 84.2-96.4%, demonstrating that PPy-PA6-NFsM has a high extraction capability for these two antibiotics. The relative standard deviations, ranging from 2.26% to 5.29% for intraday measurements and from 2.38% to 7.02% for inter-day determinations, were derived respectively.

Magnetic solid-phase extraction of four ß-lactams using polypyrrole-coated magnetic nanoparticles from water samples by micellar electrokinetic capillary chromatography analysis.

In the present research, the application of a polypyrrole coating on Fe3O4 magnetic nanoparticles (PPy/Fe3O4 MNPs) as a sorbent was confirmed. The synthesized magnetic composites were characterized by TEM, FTIR spectroscopy, and XRD. Four ß-lactams (oxacillin (OXA), cloxacillin (CLOX), dicloxacillin (DIC), and flucloxacillin (FLU)) were selected as analytes for the experiment. The extracted ß-lactams were determined by micellar electrokinetic capillary chromatography-diode array detector (MEKC-DAD). The crucial parameters influencing the extraction efficiency and separation were studied and optimized. Under the optimal conditions, the limits of detection are 1.0 µg L-1 for OXA, CLOX, FLU, and 0.8 µg L-1 for DIC. The calibration curves are linear in the range of 2.5-200.0 µg L-1. The proposed method was applied for the determination of the ß-lactams in water samples with satisfactory results. The intra-day relative standard deviations and the inter-day relative standard deviations range from 1.09% to 4.58% and from 2.95% to 7.80%, respectively. It can be concluded that this method is sensitive, convenient, and feasible for the determination of the ß-lactams in water samples.