RESUMEN
PURPOSE: To evaluate the effectiveness of whitening toothpaste in restoring tooth color after coffee staining and its potential impact on enamel surfaces compared with regular toothpaste. METHODS: Bovine tooth enamel specimens were prepared and stained with coffee solutions before undergoing brushing simulation with different toothpaste slurries (whitening, regular, reference). For precise evaluation, spectrophotometric measurements were taken at intervals to assess color changes using the CIELAB (Commission Internationale de l'Éclairage Lab*) color space. Additionally, profilometric measurements were taken to determine the impact of toothpaste type on the roughness and abraded depth of the enamel surface. To understand the effects of toothpaste and brushing on color change, surface roughness, and abraded depth, while also considering correlations between these factors, the findings were analyzed using mixed-effects models. RESULTS: The whitening toothpaste group demonstrated the highest recovery rate (71%) after 10,000 brushstrokes, followed by the regular toothpaste group (48%) and the reference slurry group (43%). The mixed-effects model analysis revealed that the reference group had a smaller change in lightness (ΔL) than those in the regular toothpaste group. The whitening toothpaste group showed a greater change in lightness on average than those in the regular toothpaste group, with an increase in lightness as the number of brushstrokes increased. According to the roughness and abraded depth data, the whitening toothpaste group was least affected by brushing, while the reference and regular toothpaste groups showed higher levels of roughness and abraded depth at all intervals. CLINICAL SIGNIFICANCE: Gaining a thorough understanding of the effectiveness of whitening toothpaste and its impact on the enamel surface plays a crucial role in refining toothpaste formulations and advancing tooth whitening techniques in dental care.
Asunto(s)
Blanqueamiento de Dientes , Decoloración de Dientes , Animales , Bovinos , Humanos , Pastas de Dientes/uso terapéutico , Pastas de Dientes/farmacología , Café , Esmalte Dental , Decoloración de Dientes/tratamiento farmacológico , Decoloración de Dientes/prevención & control , Blanqueamiento de Dientes/métodos , Cepillado Dental , Atención Odontológica , ColorRESUMEN
OBJECTIVE: This study aimed to evaluate the influence of the presence of adjacent teeth on the accuracy of intraoral scanning (IOS) systems for class II inlay preparation. MATERIALS AND METHODS: The mesio-occlusal inlay preparation was prepared in an anatomical model of the maxillary molar. The prepared tooth was secured to a typodont with the mesial adjacent tooth removed or in situ. Ten digital impressions of the inlay preparation were acquired using three IOS systems (CEREC Primescan, 3Shape TRIOS 3, and Medit i500). A laboratory scanner (3Shape E3) was used to obtain the reference scan data. The mean absolute deviation values were calculated to evaluate the accuracy of the digital models. RESULTS: The group with the adjacent teeth present showed lower trueness and precision compared to that without the adjacent tooth (p < .05). Significant differences were observed among the IOS systems (p < .05). Primescan showed the highest accuracy, irrespective of the presence of adjacent teeth. CONCLUSIONS: The presence of the adjacent tooth negatively affected the accuracy of all the IOSs tested. Although the performance of Primescan was superior to that of TRIOS 3 and i500, each IOS system showed clinically acceptable levels of accuracy for class II inlay preparation. CLINICAL SIGNIFICANCE: The adjacent tooth can be a confounding factor for accurate digital impressions of class II inlay preparation.
Asunto(s)
Técnica de Impresión Dental , Modelos Dentales , Diseño Asistido por Computadora , Arco Dental , Imagenología Tridimensional , IncrustacionesRESUMEN
This retrospective study investigated the effect of mineral trioxide aggregate (MTA) plug location on treatment outcome and root maturation after regenerative endodontic procedures (REP) in immature permanent teeth. Thirty-three roots (n = 33) in cohort that underwent REP consistently according to AAE guideline were included to trace radiographic changes for the root and canal dimensions. Based on intraoral radiographs, roots were divided into two groups depending on the location of MTA plug within whole root length: coronal group (n = 14), within the upper half; apical group (n = 19), within the lower half. Periapical radiographs were standardized to assess treatment outcomes and root maturation including root development stages and digital measurements on the change ratios of root length, apex width, radiographic root area (RRA), modified RRA (mRRA), and periapical rarefaction area. The data were statistically analysed using the Mann-Whitney test. The patients' average age was 11 years and 10 months, with no significant between-group difference in sex. Premolars were the most prevalent tooth type (62.1%), followed by incisiors and molars. Pre-existing symptoms and signs subsided within 6 months in all cases. The teeth showed similar radiographic root development in both groups (P > 0.05). However, mRRA increase ratio was significantly higher in apical group than that in coronal group at early (< 6 months) and late (< 24 months) periods of follow-up (P < 0.05). Significant changes of root development stage were observed at early period for apical group and at late period for coronal group (P < 0.05). All the observed cases showed continuing root development after REP. Significant changes in root developments occurred at different follow-up periods according to the location of MTA plugs.
Asunto(s)
Endodoncia Regenerativa , Materiales de Obturación del Conducto Radicular , Compuestos de Aluminio , Compuestos de Calcio , Niño , Combinación de Medicamentos , Humanos , Óxidos , Estudios Retrospectivos , Silicatos , Ápice del Diente/diagnóstico por imagenRESUMEN
BACKGROUND: To investigate the efficacy of a nickel-titanium (NiTi) file with an automated computerized numerical control (CNC) system for root canal shaping. METHODS: The movement of the automated device and the insertion angle were investigated. In Experiment 1, simulated resin root canals were randomly divided into four groups (n = 20): manual downward movement using a handpiece (Group 1), vertical downward movement by CNC (Group 2), reciprocating up and down movement by CNC (Group 3), and spiral up and down movement by CNC (Group 4). In Experiment 2, five different insertion angles of the NiTi file were evaluated (n = 20). Four parameters were used to evaluate the shaping ability: change in the working length, central axis offset, curvature variation, and preparation time. Groups were compared using one-way analysis of variance (ANOVA) with significance was set at P < 0.05. RESULTS: The change in central axis position in the curved part of the root canal was found to be smaller in Group 4 than in other groups (P < 0.05). The curvature changes and preparation time of Groups 1 and 4 were significantly reduced compared with Groups 2 and 3 (P < 0.05). The variation in working length and curvature in the 5° insertion angle group was significantly smaller than in the other groups (P < 0.05). CONCLUSIONS: A spiral up and down movement, controlled by the CNC machine, and 5° insertion angle, maintained original root canal shape more precisely than other methods.
Asunto(s)
Cavidad Pulpar , Níquel , Aleaciones Dentales , Diseño de Equipo , Humanos , Preparación del Conducto Radicular , TitanioRESUMEN
OBJECTIVES: To obtain radicular measurements of two separate mesiobuccal (MB) root canals in maxillary first molars using micro-computed tomography (µCT) with customized software. MATERIALS AND METHODS: Human maxillary first molar MB roots (N = 36) with two separate canals (MB1, MB2) and apical foramina were scanned by µCT and analyzed with Kappa2 software to reconstruct three-dimensional (3D) surface models of roots and canals. These models were sectioned at 0.1 mm intervals perpendicular to the central axis of each canal. Canal widths, 3D curvatures, and surrounding dentine thicknesses were measured concurrently on each section. Dentine thicknesses were analyzed statistically for differences between each direction and the different levels of both canals. RESULTS: Dentine walls around MB1 were thicker than MB2 (p < 0.05). Thinnest dentine was most often located at disto-inside direction in both canals. Canal widths were significantly smaller in MB2 than MB1 (p < 0.01). Apical constrictions were smaller (p < 0.05) and further (p < 0.05) from the apex in MB2 than MB1. Canal curvatures were greatest in the apical third of both canals (p < 0.001), and they were greater in MB2 than MB1 (p < 0.05). CONCLUSIONS: MB2 canals had shorter lengths, smaller widths, and more severe curvatures and were surrounded by thinner dentine walls. In MB2, apical constrictions were between 1 and 2 mm from the apex, compared to about 1 mm for MB1. CLINICAL RELEVANCE: These detailed measurements and in-depth 3D analyses of maxillary first molar MB roots with two separate canals and apical foramina provide morphologic references for root canal therapy.
Asunto(s)
Cavidad Pulpar , Maxilar , Cavidad Pulpar/diagnóstico por imagen , Humanos , Maxilar/diagnóstico por imagen , Diente Molar/diagnóstico por imagen , Raíz del Diente/diagnóstico por imagen , Microtomografía por Rayos XRESUMEN
BACKGROUND: Strain distribution was investigated to assess the occlusal resistance alterations in immature teeth under different occlusal force. METHODS: In vitro apexification models of teeth with a funnel-shaped immature apex were obturated with mineral trioxide aggregate (MTA; ProRoot MTA) using different combinations of core materials (10/group): group 1, full-length orthograde obturation of MTA; group 2, a 5-mm MTA apical plug with a composite core; group 3, a 5-mm MTA apical plug and back-filling with warm gutta-percha. Teeth with calcium hydroxide (CH)-medicated canals and untreated teeth with normal apices were tested as controls. The teeth were arranged between two adjacent normal-apex teeth, embedded in a resin mold with a simulated periodontal ligament space. Strain data were recorded from the 3-unit teeth assembly under static compressive occlusal forces (50, 100, 200, and 300 N). Measurements were repeated 20 times for each condition, and the data were statistically analyzed. RESULTS: The immature teeth showed altered occlusal force resistance, placing increased strain on adjacent teeth. Teeth with CH-medicated canals showed significantly inferior occlusal resistance under all tested forces (P < 0.05). Application of an MTA plug with deep composite resin core resulted in significantly better stress-bearing capacity especially under forces of 50 and 300 N (P < 0.05). CONCLUSIONS: The pattern of occlusal force distribution in immature teeth differed according to the canal obturation materials used for apexification. Immature teeth with an MTA apical plug showed more favorable occlusal force resistance than those with CH-medicated canals.
Asunto(s)
Apexificación , Materiales de Obturación del Conducto Radicular , Compuestos de Aluminio/uso terapéutico , Compuestos de Calcio/uso terapéutico , Hidróxido de Calcio , Combinación de Medicamentos , Gutapercha , Humanos , Óxidos/uso terapéutico , Materiales de Obturación del Conducto Radicular/uso terapéutico , Obturación del Conducto Radicular , Silicatos/uso terapéutico , Ápice del DienteRESUMEN
Human ß defensin-3-C15, an epithelium-derived cationic peptide that has antibacterial/antifungal and immuno-regulatory properties, is getting attention as potential therapeutic agent in endodontics. This study aimed to investigate if synthetic human ß defensin-3-C15 (HBD3-C15) peptides could inhibit inflammatory responses in human dental pulp cells (hDPCs), which had been induced by gram-positive endodontic pathogen. hDPC explant cultures were stimulated with Streptococcus gordonii lipoprotein extracts for 24 h to induce expression of pro-inflammatory mediators. The cells were then treated with either HBD3-C15 (50 µg/mL) or calcium hydroxide (CH, 100 µg/mL) as control for seven days, to assess their anti-inflammatory effects. Quantitative RT-PCR analyses and multiplex assays showed that S. gordonii lipoprotein induced the inflammatory reaction in hDPCs. There was a significant reduction of IL-8 and MCP-1 within 24 h of treatment with either CH or HBD3-C15 (p < 0.05), which was sustained over 1 week of treatment. Alleviation of inflammation in both medications was related to COX-2 expression and PGE2 secretion (p < 0.05), rather than TLR2 changes (p > 0.05). These findings demonstrate comparable effects of CH and HDB3-C15 as therapeutic agents for inflamed hDPCs.
Asunto(s)
Antiinflamatorios/farmacología , Lipoproteínas/inmunología , Infecciones Estreptocócicas/inmunología , Streptococcus gordonii/inmunología , beta-Defensinas/farmacología , Antiinflamatorios/síntesis química , Células Cultivadas , Pulpa Dental/citología , Pulpa Dental/efectos de los fármacos , Pulpa Dental/inmunología , Humanos , Inflamación/tratamiento farmacológico , Inflamación/etiología , Inflamación/inmunología , Modelos Moleculares , Infecciones Estreptocócicas/complicaciones , Infecciones Estreptocócicas/tratamiento farmacológico , beta-Defensinas/síntesis químicaRESUMEN
The purpose of this study was to compare dentinal tubule sealing effects of a 532-nm diode-pumped solid-state (DPSS) laser, gallic acid/Fe3+ complex, and three commercially available dentin desensitizers. Human premolars (n = 44) extracted for orthodontics had standardized cervical cavities prepared, etched (37% phosphoric acid) and randomly assigned to either a control (n = 4), or one of five treatment groups (n = 8/group). Desensitizing treatments were either a 532-nm DPSS laser, gallic acid/Fe3+ complex, oxalate-based Super Seal™ (SS), DIO™ Enamel Coating Pen Pro Tooth (Dio), or adhesive-type Hybrid Coat™ (HC). Dentinal fluid flow (DFF) was monitored continuously in real time during the application of each desensitizing agent, by using a nanoliter-scaled fluid flow-measuring device. Following treatment, morphological changes on dentinal surfaces and within tubules were observed by scanning electron microscopy (SEM). DFF rates were significantly reduced after treatment in all experimental groups (P < 0.05), except SS (P > 0.05). The gallic acid/Fe3+ complex reduced DFF rates the most, and significantly (P < 0.05) more than the three commercial dentin desensitizers. There were no significant differences in DFF reduction rates between the gallic acid/Fe3+ complex and the DPSS laser groups (P > 0.05). There were no significant differences in DFF reduction rates among the three commercial dentin desensitizers (P > 0.05). SEM examination of treated dentin showed that the degree of occlusion of dentinal tubules correlated closely with the corresponding reduction in DFF rates. The gallic acid/Fe3+ complex and 532-nm DPSS laser were superior to other desensitizing methods in occluding dentinal tubules and reducing DFF rates.
Asunto(s)
Desensibilizantes Dentinarios/uso terapéutico , Sensibilidad de la Dentina/tratamiento farmacológico , Ácido Gálico/química , Hierro/química , Láseres de Estado Sólido/uso terapéutico , Dentina/efectos de los fármacos , Dentina/ultraestructura , Desensibilizantes Dentinarios/farmacología , Líquido de la Dentina/efectos de los fármacos , Líquido de la Dentina/efectos de la radiación , HumanosRESUMEN
OBJECTIVE: The purpose of this study was to compare the cytotoxicity of four denture adhesives on human gingival fibroblast cells. MATERIALS AND METHODS: Immortalized human gingival fibroblasts were cultured with one of four different denture adhesives, Polident, Protefix, Staydent or Denfix-A, which was placed in insert dishes (10% w/v concentration) for 48 h. The MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay and flow cytometric apoptosis assay were used to evaluate cell viability and apoptosis rates. The fibroblasts were also examined under a scanning electron microscope. RESULTS: The MTT assay showed that all denture adhesives resulted in a significantly lower cell viability compared to the control cells propagated in normal culture medium (p < 0.05), with Staydent demonstrating the lowest cell viability. According to the flow cytometric apoptosis assay, Staydent and Protefix showed significantly higher apoptosis rates than the control group (p < 0.05), whereas Polident and Denfix-A did not demonstrate any significant differences (p > 0.05). Staydent showed the highest apoptosis rate. Scanning electron microscopy showed that the cells of the Staydent group underwent cytoplasmic membrane shrinkage, with cell free areas containing residual fragments of the membrane of dead cells. CONCLUSIONS: The four denture adhesives evaluated in this study imparted cytotoxic effects on human gingival fibroblast cells. Staydent showed the highest toxicity.
Asunto(s)
Adhesivos/toxicidad , Retención de Dentadura , Fibroblastos/efectos de los fármacos , Encía/citología , Apoptosis/efectos de los fármacos , Técnicas de Cultivo de Célula , Línea Celular , Membrana Celular/efectos de los fármacos , Forma de la Célula/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Citometría de Flujo , Encía/efectos de los fármacos , Humanos , Maleatos/toxicidad , Microscopía Electrónica de Rastreo , Polietilenos/toxicidad , Sales de Tetrazolio , Tiazoles , Factores de TiempoRESUMEN
OBJECTIVE: Micro-computed tomography (MCT) with alternative image reformatting techniques shows complex and detailed root canal anatomy. This study compared two-dimensional (2D) and 3D MCT image reformatting with standard tooth clearing for studying mandibular first molar mesial root canal morphology. MATERIALS AND METHODS: Extracted human mandibular first molar mesial roots (n=31) were scanned by MCT (Skyscan 1172). 2D thin-slab minimum intensity projection (TS-MinIP) and 3D volume rendered images were constructed. The same teeth were then processed by clearing and staining. For each root, images obtained from clearing, 2D, 3D and combined 2D and 3D techniques were examined independently by four endodontists and categorized according to Vertucci's classification. Fine anatomical structures such as accessory canals, intercanal communications and loops were also identified. RESULTS: Agreement among the four techniques for Vertucci's classification was 45.2% (14/31). The most frequent were Vertucci's type IV and then type II, although many had complex configurations that were non-classifiable. Generally, complex canal systems were more clearly visible in MCT images than with standard clearing and staining. Fine anatomical structures such as intercanal communications, accessory canals and loops were mostly detected with a combination of 2D TS-MinIP and 3D volume-rendering MCT images. CONCLUSIONS: Canal configurations and fine anatomic structures were more clearly observed in the combined 2D and 3D MCT images than the clearing technique. The frequency of non-classifiable configurations demonstrated the complexity of mandibular first molar mesial root canal anatomy.
Asunto(s)
Cavidad Pulpar/diagnóstico por imagen , Diente Molar/diagnóstico por imagen , Preparación del Conducto Radicular/métodos , Microtomografía por Rayos X/métodos , Adulto , Anatomía Transversal/métodos , Colorantes , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional/métodos , Persona de Mediana Edad , Raíz del Diente/diagnóstico por imagenRESUMEN
INTRODUCTION: The aim of this study was to evaluate the efficacy of different irrigation needles and passive ultrasonic activation in removing Ca(OH)2 from an endodontic model that duplicated a root canal configuration of a human natural tooth. METHODS: An extracted human maxillary premolar was subjected to root canal preparation and scanned with microcomputed tomography. A 3-dimensional reconstruction model of the natural tooth was printed to endodontic models using a polyjet printer. The root canals of the models were filled with Ca(OH)2 paste and divided into 2 groups based on the irrigation protocol: conventional syringe-needle irrigation (conventional group) and passive ultrasonic irrigation (PUI) group. Each group was subdivided into 3 groups (n = 10) according to the type of needle: half-cut, side-vented, and TruNatomy irrigation needle. Microcomputed tomographyimaging was used to assess the percentage of reduction of Ca(OH)2. Data were analyzed using two-way analysis of variance test (α = .05). RESULTS: The side-vented and TruNatomy irrigation needles showed significantly higher percentage reductions than the half-cut needle (P < .05) in the conventional irrigation group. The PUI group showed significantly higher percentage reductions of Ca(OH)2 than the conventional group regardless of the type of needle (P < .05). However, no significant difference was found among the needles in the PUI group. CONCLUSIONS: The type of irrigation needle and the use of PUI influenced the removal efficacy of Ca(OH)2. PUI enhanced the removal of Ca(OH)2 regardless of the type of irrigation needle.
RESUMEN
INTRODUCTION: This retrospective cohort study aimed to evaluate long-term healing outcomes (10-17.5 years) after contemporary endodontic microsurgery (EMS) and identify the associated prognostic factors. METHODS: Clinical and radiographic data of an EMS cohort (2006-2013) from the electronic database of the dental hospital were reviewed retrospectively by 2 independent examiners to determine their survival and healing outcomes, and potential prognostic factors were analyzed by Cox proportional hazards regression and logistic regression (α = 0.05). RESULTS: Through strict inclusion and exclusion criteria and 721 EMS-treated teeth in the cohort, 309 (42.9%) were included (male = 35.0%; female = 65.0%; age = 45.83 ± 15.53 years) with a mean final follow-up of 152.26 ± 26.37 months (range, 120-211 months; median = 148 months). Clinical and radiographic assessments found an 80.5% 10-year survival rate with 63.4% of success. Collectively, tooth type, tooth mobility, preoperative lesion size, clinical crown-to-root ratio, and crown restorations at follow-up were significantly associated with long-term success and survival over 10 years. CONCLUSIONS: The preoperative status and condition of the tooth including its alveolar bone support and adequate full-crown restorations may be relevant prognostic determinants of success and survival after EMS over time.
Asunto(s)
Microcirugia , Humanos , Estudios Retrospectivos , Masculino , Femenino , Persona de Mediana Edad , Adulto , Pronóstico , Resultado del Tratamiento , Tratamiento del Conducto Radicular , Estudios de Cohortes , Estudios de SeguimientoRESUMEN
INTRODUCTION: Microbiota associated with primary endodontic infection (PEI) and secondary/persistent endodontic infection (SPEI) must be characterized to elucidate pathogenesis in apical periodontitis and bacterial biomarkers identified for diagnostic and therapeutic applications. METHODS: This study analyzed the microbial community profiles of root canals and gingival sulci (sulcus-E) for teeth with PEI (n = 10) or SPEI (n = 10), using the Illumina MiSeq platform. Bacterial samples from gingival sulci (sulcus-C) of healthy contralateral teeth served as controls. RESULTS: There were 15 phyla, 177 genera, and 340 species identified. The number and diversity of bacteria in root canals did not differ significantly between PEI and SPEI. Proteobacteria, Firmicutes, Fusobacteria, Bacteroidetes, and Actinobacteria were the dominant phyla in both groups. At the genus level, Lancefieldella, Bifidobacterium, Stomatobaculum, and Schaalia were enriched in root canals with SPEI. Of significance, Lancefieldella was observed in both root canals and sulcus-E of teeth with SPEI. At the species level, Neisseria macacae, Streptococcus gordonii, Bifidobacterium dentium, Stomatobaculum longum, and Schaalia odontolytica were increased significantly in root canals with SPEI compared to PEI. Oribacterium species, Streptococcus salivarius, Lancefieldella parvula, Prevotella denticola, and Oribacterium asaccharolyticum were more abundant in sulcus-E of teeth with SPEI compared to PEI. CONCLUSIONS: There were distinctive and differing predominant bacterial species associated with the root canals and gingival sulci between teeth with PEI and SPEI. Specific bacteria identified in sulcus-E and root canals of teeth with SPEI could serve as noninvasive diagnostic biomarkers for detecting SPEI.
Asunto(s)
Cavidad Pulpar , Encía , Microbiota , Humanos , Cavidad Pulpar/microbiología , Encía/microbiología , Adulto , Periodontitis Periapical/microbiología , Femenino , Masculino , Persona de Mediana EdadRESUMEN
Background/purpose: One of the challenges in adhesive ceramic restorations is deterioration of tooth-cement-ceramic interfaces. This study was to quantitatively investigate lipopolysaccharide (LPS) penetration through adhesive ceramic restorations. Materials and methods: Standardized holes were formed on ceramic (IPS Empress CAD, Ivoclar Vivadent) and human dentin discs. Prepared discs were randomly assigned to experimental groups (n = 6/group): SC, self-adhesive resin cement (SmartCem 2, Dentsply Sirona) bonded to ceramic discs; ST, self-adhesive resin cement bonded to dentin discs; VC, etch-and-rinse resin cement (Variolink II, Ivoclar Vivadent AG) bonded to ceramic discs; VT, etch-and-rinse resin cement bonded to dentin discs. The specimens underwent thermocycling (10,000 cycles; 5-55 °C) then LPS penetration test until 5-weeks. A mixed effect analysis using R statistical language was performed for data analysis. Results: Dentin and ceramic bonded with etch-and-rinse resin cements (groups VT and VC) showed significantly less penetration than those with self-adhesive resin cement (groups ST and SC) (P < 0.05). ST showed significantly lower penetration than SC (P < 0.05), that showed similar penetration with positive control (P > 0.05). VC showed minimal penetration during observed time of period (P < 0.05). Scanning electron microscope observations showed different interfacial characteristics among the groups. Conclusion: Within the limitation of this study, etch-and-rinse resin cement showed less LPS penetration than self-adhesive resin cement on both ceramic and dentin surfaces.
RESUMEN
This study was to investigate the new analysis manner of dental hard tissue change using in vivo micro-computed tomography (CT) in rat. Scanning, registration, analyzing, and presenting method to track longitudinal in vivo micro-CT data on dental hard tissues were validated in murine models: formative, dentin thickness after direct pulp capping with mineral trioxide aggregate; resorptive, development of apical bone rarefaction in apical periodontitis model. Serial in vivo micro-CT scans were analyzed through rigid-registration, active-contouring, deformable-registration, and motion vector-based quantitative analyses. The rate and direction of hard tissue formation after direct pulp capping was datafied by tracing coordinate shift of fiducial points on pulp chamber outline in formative model. The development of apical periodontitis could be monitored with voxel counts, and quantitatively analyzed in terms of lesion size, bone loss, and mineral density in resorptive model. This study supports the application of longitudinal in vivo micro-CT for resorptive- and formative-phase specific monitoring of dental hard tissues.
Asunto(s)
Recubrimiento de la Pulpa Dental , Periodontitis Periapical , Ratas , Ratones , Animales , Microtomografía por Rayos X/métodos , Recubrimiento de la Pulpa Dental/métodos , Compuestos de Calcio , Silicatos/farmacología , Minerales , Periodontitis Periapical/patología , Combinación de Medicamentos , Óxidos , Pulpa DentalRESUMEN
INTRODUCTION: This study aimed to determine if stress distribution from occlusal loads after targeted endodontic microsurgery (TEMS) differed for trephine-resected flat and curved root-ends, with and without bone graft. METHODS: Finite element analysis models were constructed from cone-beam computed tomography data of a TEMS-treated maxillary central incisor. Models included flat and curved resected root-ends, with and without apical bone graft, and normal or root canal filled controls. In centric occlusion, axial force was directed on mesial and distal lingual marginal ridges at 120° angle. For lateral excursion, additional mesiodistal forces were applied from centric occlusion. For edge biting, axial force was directed on the incisal edge. Under occlusal loads, stress distribution patterns on tooth and root-end circumference were analyzed. RESULTS: In normal and root filled controls, occlusal stress was distributed on labial and palatal root surfaces, concentrated in the labial cervical area, and maximized at the apex. For resected root-ends, occlusal loads concentrated stress on the labial cervical area. With bone graft, maximum stress concentration shifted to the apex, which implied stress relief and dispersion from the cervical root area. Stress patterns on the root-end were more widely spread in models with apical bone graft, whereas curved root-end showed stress concentrating arc especially when without apical bone support. The mean stress values on root-end circumference were significantly higher in curved than flat root-end (P < .05), especially with apical bone support (P < .05). CONCLUSIONS: Occlusal stress patterns on a maxillary central incisor were markedly affected by root-end resection configuration and apical bone support. Trephine-resected curved root-end had stress pattern concentrated on its circumference. Curved and flat root-ends had labial cervical stress that was relieved by bone graft. TEMS resected root-ends should be flattened and bone grafted to disperse stress from occlusal loads.
Asunto(s)
Microcirugia , Raíz del Diente , Análisis de Elementos Finitos , Estrés Mecánico , Raíz del Diente/diagnóstico por imagen , Raíz del Diente/cirugía , Incisivo/cirugíaRESUMEN
INTRODUCTION: This study aimed to investigate microbiota and the histopathology of infected immature teeth microenvironments after disinfection with calcium hydroxide, triple antibiotic paste, and a synthetic antimicrobial peptide (synthetic human beta-defensin-3-C15) for regenerative endodontic procedures (REPs). The null hypothesis was that there is no difference among intracanal medications on disinfection in REPs. METHODS: Pulp necrosis and periapical lesions were induced in immature beagle dog premolars. Block randomized teeth were uninfected (negative control, n = 6), left infected (positive control, n = 6), or medicated with a disinfectant (n = 6/group). After disinfection (2 weeks), teeth were reaccessed, irrigated with 17% EDTA, blood clot induced, sealed with ProRoot MTA (Dentsply Tulsa Dental, Tulsa, OK), and restored with resin-modified glass ionomer. Animals were monitored radiographically and euthanized (12 weeks) for histopathologic and metagenomic analyses. RESULTS: REP-treated roots showed radiographic repair of periapical radiolucency (67.65%, 23/34), continued root development (73.53%, 25/34), and apical closure (70.59%, 24/34) regardless of the disinfectant used (P > .05). Canal microenvironments histologically devoid of bacteria contained new mineralized and pulp-like tissues in characteristic patterns that varied by disinfectant. Next-generation sequencing (16S ribosomal RNA) identified Firmicutes, Proteobacteria, Actinobacteria, and Bacteroidetes as dominant phyla of microbiota in immature teeth. Infection-induced teeth showed changes in diversity and richness of microbiota from negative controls. Compared with positive controls, all treated teeth exhibited depleted operational taxonomic units, with lower phylogenic diversity from synthetic human beta-defensin-3-C15-treated teeth. CONCLUSIONS: There were no differences among the medicaments investigated in radiologic treatment outcomes, but disinfectants in REPs showed altered microbiota from normal and diseased immature teeth with different histologic patterns of regeneration.
Asunto(s)
Microbiota , Periodontitis Periapical , Endodoncia Regenerativa , Animales , Necrosis de la Pulpa Dental/terapia , Perros , Periodontitis Periapical/terapia , Tratamiento del Conducto RadicularRESUMEN
This study aimed to investigate the real-time nanoleakage and flow characteristics of calcium silicate-based (Ca-Si) root canal filling materials. Extracted human teeth (n = 30) were decoronated and standardized in their inner and outer dimensions. After root canal enlargement, the roots were filled with gutta-percha (GP) and AH26 sealer, GP and EndoSeal MTA sealer, or Biodentine. The roots were connected to a Nanoflow device (IB Systems) under hydrostatic pressure (40 cmâH2O) and fluid flow was traced through the filled roots. Data were detected at the nanoscale twice per second and automatically recorded in units of nL/s. Leakage was quantified as the mean slope until the curve plateaued over time, and all static flow intervals lasting longer than 1 s were analyzed to identify any increase in flow and duration. Data were statistically analyzed using the Kruskal-Wallis test. The calculated leakage values were 0.0670 ± 0.0516 nL/s for GP/AH26, 0.1397 ± 0.1579 nL/s for GP/EndoSeal MTA, and 0.0358 ± 0.0538 nL/s for Biodentine, with no statistically significant differences among the root filling materials (P > 0.05). An analysis of real-time flow data for 1000 s to identify spot trends and the overall tendency of flow until a plateau was reached revealed a stepwise increase in the roots filled with Ca-Si material, whereas the GP/AH26-filled roots showed a linear increase. Real-time measurements under hydrostatic pressure with the Nanoflow device enabled precise fluid flow tracing through the root canal filling material. In terms of nanoleakage, the tested root canal filling materials showed no significant differences, while the real-time flow patterns of roots filled with Ca-Si material showed different characteristics from those of GP/AH26-filled roots.
Asunto(s)
Materiales de Obturación del Conducto Radicular , Compuestos de Calcio , Combinación de Medicamentos , Resinas Epoxi , Gutapercha , Humanos , SilicatosRESUMEN
Candida albicans (C. albicans) is the fungus most frequently isolated from endodontic root canal infections. Although recognized by dental pulp and periradicular tissue cells that elicit immune responses, it eludes host defenses and elicits cell death. Then, C. albicans binds tooth dentin, forms biofilms, and invades dentinal tubules to resist intracanal disinfectants and endodontic treatments. Insensitive to most common medicaments, it survives sequestered within biofilms and intratubular dentin. Thus, C. albicans has been associated with cases of persistent or refractory root canal infections. Its treatment strategies may require alternative intracanal irrigants, intracanal medicaments such as chlorhexidine gel or human beta defensin-3 (HBD3), Ca-Si-based obturating materials, and microsurgical procedures.
RESUMEN
The aim of this study was to analyze the long-term outcomes of endodontic microsurgeries in a cohort and identify their association with prognostic factors. A cohort of endodontic microsurgeries followed up periodically with complete clinical and radiographic records for at least 5 years were reviewed retrospectively. Their survival and healing status and profile characteristics were analyzed by Pearson chi-square test and logistic regression (α = 0.05) to identify prognostic factors that influenced outcomes. Of 652 cases in the cohort, 225 (34.5%) were included. The mean follow-up period was 90.4 months (range, 60-168 months). The long-term success rate was 80.5%, and the 5-year survival rate was 83.5%. Logistic regression showed higher success in anteriors compared to molars (OR = 5.405, (95% CI, 1.663-17.571; p = 0.005)) and in teeth with crown restorations (OR = 10.232, (95% CI, 3.374-31.024; p < 0.001)). Conversely, lower success was found in teeth with periodontal disease (OR = 0.170, (95% CI, 0.032-0.900; p = 0.037)) and maxillary sinus involvement (OR = 0.187, (95% CI, 0.035-0.994; p = 0.049)). Endodontic microsurgery has a highly favorable long-term outcome. Tooth position, crown restoration, periodontal disease, and maxillary sinus involvement were identified as main prognostic factors.