RESUMEN
The stress-strain data of 20MnNiMo alloy were collected from a series of hot compressions on Gleeble-1500 thermal-mechanical simulator in the temperature range of 1173 â¼ 1473 K and strain rate range of 0.01 â¼ 10 s(-1). Based on the experimental data, the improved Arrhenius-type constitutive model and the artificial neural network (ANN) model were established to predict the high temperature flow stress of as-cast 20MnNiMo alloy. The accuracy and reliability of the improved Arrhenius-type model and the trained ANN model were further evaluated in terms of the correlation coefficient (R), the average absolute relative error (AARE), and the relative error (η). For the former, R and AARE were found to be 0.9954 and 5.26%, respectively, while, for the latter, 0.9997 and 1.02%, respectively. The relative errors (η) of the improved Arrhenius-type model and the ANN model were, respectively, in the range of -39.99% â¼ 35.05% and -3.77% â¼ 16.74%. As for the former, only 16.3% of the test data set possesses η-values within ± 1%, while, as for the latter, more than 79% possesses. The results indicate that the ANN model presents a higher predictable ability than the improved Arrhenius-type constitutive model.
Asunto(s)
Manganeso/química , Modelos Químicos , Modelos Moleculares , Molibdeno/química , Redes Neurales de la Computación , Níquel/química , Algoritmos , Aleaciones/química , Fuerza Compresiva , Simulación por Computador , Difusión , Módulo de Elasticidad , Cinética , Transición de Fase , Resistencia a la Tracción , Conductividad Térmica , ViscosidadRESUMEN
The mechanics of a new shape memory alloy cervical hook for atlantoaxial instability was analyzed with finite element method on the basis of a three-dimensional model reconstructed from the images of CT scanning of an adult cadaveric upper cervical at 1-mm interval. The stress and displacement of every nodule and element in the course of deformation of the internal fixation were tested, and the results showed that the cervical hook was strong enough against tensile stress, which concentrates in the middle of the device. The pull was 237.58 N at the loading point. With such mechanical performance, this cervical hook can be reliable for correction of atlantoaxial instability.