Bibliometric Analysis of Forensic Human Remains Identification Literature from 1991 to 2022.

OBJECTIVES: To describe the current state of research and future research hotspots through a metrological analysis of the literature in the field of forensic anthropological remains identification research. METHODS: The data retrieved and extracted from the Web of Science Core Collection (WoSCC), the core database of the Web of Science information service platform (hereinafter referred to as "WoS"), was used to analyze the trends and topic changes in research on forensic identification of human remains from 1991 to 2022. Network visualisation of publication trends, countries (regions), institutions, authors and topics related to the identification of remains in forensic anthropology was analysed using python 3.9.2 and Gephi 0.10. RESULTS: A total of 873 papers written in English in the field of forensic anthropological remains identification research were obtained. The journal with the largest number of publications was Forensic Science International (164 articles). The country (region) with the largest number of published papers was China (90 articles). Katholieke Univ Leuven (Netherlands, 21 articles) was the institution with the largest number of publications. Topic analysis revealed that the focus of forensic anthropological remains identification research was sex estimation and age estimation, and the most commonly studied remains were teeth. CONCLUSIONS: The volume of publications in the field of forensic anthropological remains identification research has a distinct phasing. However, the scope of both international and domestic collaborations remains limited. Traditionally, human remains identification has primarily relied on key areas such as the pelvis, skull, and teeth. Looking ahead, future research will likely focus on the more accurate and efficient identification of multiple skeletal remains through the use of machine learning and deep learning techniques.

Reusable and universal impedimetric sensing platform for the rapid and sensitive detection of pathogenic bacteria based on bacteria-imprinted polythiophene film.

The rapid and sensitive detection of pathogenic bacteria is highly demanded for early warning of infectious disease epidemics and protection of human health. Herein, a reusable and universal impedimetric sensing platform based on a bacteria-imprinted polythiophene film (BIF) is proposed for the rapid and sensitive detection of pathogenic bacteria using Staphylococcus aureus (S. aureus) as a model analyte. Monomer screening among four 3-substituted thiophenes was first performed based on the imprinting factor, and 3-thiopheneethanol (TE) was eventually selected. The BIF as a recognition layer was quickly deposited in an environmentally friendly process on a glassy carbon electrode via electro-copolymerization of the S. aureus template and TE monomer followed by in situ template removal. Upon rebinding of S. aureus on the BIF, the impedance increased. Under optimal conditions, the BIF-based sensor can quantitatively detect S. aureus in a wide linear range of 10 to 107 CFU mL-1 with a low detection limit of 4 CFU mL-1. Additionally, the sensor exhibits excellent selectivity, capable of identifying S. aureus from multi-bacterial strain mixtures. It also demonstrates applicability in the analysis of real lettuce and shrimp samples with good recoveries. Most significantly, the BIF sensing interface can be reused up to five times with good signal retention. Compared with most reported methods, this sensor is more rapid with a much shorter total assay time of 30 min, including the BIF preparation, bacterial rebinding, and impedance detection. This assay may hold great potential to help in the rapid, sensitive, and label-free detection of pathogenic bacteria in fields of food safety and public health.

Realizing Ultrahigh Transconductance in Organic Electrochemical Transistor by Co-Doping PEDOT:PSS with Ionic Liquid and Dodecylbenzenesulfonate.

Organic electrochemical transistors (OECTs), especially the ones with high transconductance, are highly promising in sensitive detection of chemical and biological species. However, it is still a great challenge to design and fabricate OECTs with very high transconductance. Herein, an OECT with ultrahigh transconductance is reported by introducing ionic liquid and dodecylbenzenesulfonate (DBSA) simultaneously in poly(3,4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT:PSS) as the semiconductive channel. Compared with the OECT based on pristine PEDOT:PSS, the OECT based on co-doped PEDOT:PSS demonstrates a significant enhancement of transconductance from 1.85 to 22.7 mS, because of the increase in volumetric capacitance and conductivity. The enhanced transconductance is attributed to the DBSA-facilitated phase separation between the ionic liquid and PEDOT:PSS, which helps to form conductive domains of ionic liquid in PEDOT:PSS matrix, and the partial dispersion of ionic liquid in the PEDOT:PSS phase. Furthermore, by using the interdigitated electrodes as the source and drain electrodes, an ultrahigh transconductance of 180 mS is obtained, which is superior to that of the state-of-the-art OECTs. Because of the ultrahigh transconductance, the obtained OECT demonstrates sensitive detection of hydrogen peroxide and glucose, making it promising in clinical diagnosis, health monitoring, and environmental surveillance.

Modified Sialic Acids on Mucus and Erythrocytes Inhibit Influenza A Virus Hemagglutinin and Neuraminidase Functions.

Sialic acids (Sia) are the primary receptors for influenza viruses and are widely displayed on cell surfaces and in secreted mucus. Sia may be present in variant forms that include O-acetyl modifications at C-4, C-7, C-8, and C-9 positions and N-acetyl or N-glycolyl at C-5. They can also vary in their linkages, including α2-3 or α2-6 linkages. Here, we analyze the distribution of modified Sia in cells and tissues of wild-type mice or in mice lacking CMP-N-acetylneuraminic acid hydroxylase (CMAH) enzyme, which synthesizes N-glycolyl (Neu5Gc) modifications. We also examined the variation of Sia forms on erythrocytes and in saliva from different animals. To determine the effect of Sia modifications on influenza A virus (IAV) infection, we tested for effects on hemagglutinin (HA) binding and neuraminidase (NA) cleavage. We confirmed that 9-O-acetyl, 7,9-O-acetyl, 4-O-acetyl, and Neu5Gc modifications are widely but variably expressed in mouse tissues, with the highest levels detected in the respiratory and gastrointestinal (GI) tracts. Secreted mucins in saliva and surface proteins of erythrocytes showed a high degree of variability in display of modified Sia between different species. IAV HAs from different virus strains showed consistently reduced binding to both Neu5Gc- and O-acetyl-modified Sia; however, while IAV NAs were inhibited by Neu5Gc and O-acetyl modifications, there was significant variability between NA types. The modifications of Sia in mucus may therefore have potent effects on the functions of IAV and may affect both pathogens and the normal flora of different mucosal sites.IMPORTANCE Sialic acids (Sia) are involved in numerous different cellular functions and are receptors for many pathogens. Sia come in chemically modified forms, but we lack a clear understanding of how they alter interactions with microbes. Here, we examine the expression of modified Sia in mouse tissues, on secreted mucus in saliva, and on erythrocytes, including those from IAV host species and animals used in IAV research. These Sia forms varied considerably among different animals, and their inhibitory effects on IAV NA and HA activities and on bacterial sialidases (neuraminidases) suggest a host-variable protective role in secreted mucus.

Simulation Insight into the Synergic Role of Citrate and Polyaspartic Peptide in Biomineralization.

Hydroxyapatite (HAP) is one of the most important inorganic components in biological minerals such as bones and teeth. More than 90% of the total citrate is accumulated in human bones and other biomineralized tissues. In addition, mineralizing proteins are enriched in glutamate and aspartate residues, which are important for their mineral-regulating properties. However, how citrate ions (CITs) and/or acidic amino acids regulate the formation of HAP is still unclear. In this work, molecular dynamics simulations were performed to study how CIT regulates the adsorption behavior of polyaspartic acid (PASP) on the HAP surface in the calcium phosphate solution. The simulation results indicate that PASP can be used as an ion chelator to complex Ca2+ and can serve as templates for HAP mineralization by templating the distribution of Ca2+ on its surface, which are attributed to the -COO- and α-helix structure. Most importantly, the orientation distributions of PASP in all systems are narrower with the help of CIT, thereby PASP can be adsorbed on the HAP surface stably with a "lying-down" orientation. This indicates that CIT can be used as a bridging agent to bond the acidic peptide to the HAP surface in biomineralization. Thus, the synergic role of CIT and the acidic peptide on the HAP surface were revealed in this work, which can provide new insights into the interfacial phenomena during the biomineralization.

[The Spatiotemporal Expression Patterns of Mechanical-Stress Related Regulatory Proteins in Mouse Molar Development].

OBJECTIVE: In order to better understand the role of mechanical stress in early tooth development, we examined the spatiotemporal expression patterns of mechanical-stress related regulatory protein (actin filament, or F-actin), non-muscle myosin ⅡB (NMⅡB) and vinculin at different stages of tooth development in mice. METHODS: Mouse first mandible molars were used as the research model. Immunofluorescence staining was performed to detect the expression patterns of F-actin, NMⅡB and Vinculin, the key molecules constituting the chemical mechanical system, at bud, cap, early bell and late bell stages of tooth. RESULTS: F-actin, NMⅡB and vinculin were all expressed in the tooth epithelium in an extensive or a limited way at different stages of tooth development, while F-actin was also expressed steadily in the mesenchymal cells. The quantitative analysis of fluorescence intensity showed that F-actin and NMⅡB exhibited significantly increase in the early stage of tooth development, but then dropped to their basal levels at the end of the late bell stage and the early bell stage respectively, with the differences of expression changes between successive developmental stages showing statistically significance ( P<0.05). Vinculin expression, however, remained at a relatively constant level except for the late bell stage when vinculin expression was slightly elevated compared to that of the early bell stage ( P<0.05). CONCLUSIONS: The findings suggest that mechanical stress is involved in early tooth development. F-actin may have an important role in dispersing and transmitting mechanical stress while NMⅡB may participate in tooth epithelial invagination and cusps formation. The findings also suggest that vinculin can respond to the mechanical stimuli and its interaction with cell adhesion molecules may play a role in tooth development. The mechanism of how actomyosin and cell adhesion interact with each other in regulating tooth development still needs further investigation.

Overview of recent advances in liposomal nanoparticle-based cancer immunotherapy.

The clinical performance of conventional cancer therapy approaches (surgery, radiotherapy, and chemotherapy) has been challenged by tumor metastasis and recurrence that is mainly responsible for cancer-caused mortalities. The cancer immunotherapy is being emerged nowadays as a promising therapeutic modality in order to achieve a highly efficient therapeutic performance while circumventing tumor metastasis and relapse. Liposomal nanoparticles (NPs) may serve as an ideal platform for systemic delivery of the immune modulators. In this review, we summarize the cutting-edge progresses in liposomal NPs for cancer immunotherapy, with focus on dendritic cells, T cells, tumor cells, natural killer cells, and macrophages. The review highlights the major challenges and provides a perspective regarding the clinical translation of liposomal nanoparticle-based immunotherapy.

Trueness analysis of zirconia crowns fabricated with 3-dimensional printing.

STATEMENT OF PROBLEM: The primary manufacturing method of zirconia ceramic crowns is computer-aided design and computer-aided manufacture (CAD-CAM), but a disadvantage of this technique is material waste. Three-dimensional (3D) printing, which has been recently introduced into dentistry, has improved the processing of polymers and metals, but not yet of ceramic crowns. PURPOSE: The purpose of this in vitro study was to evaluate the 3D trueness of zirconia crowns fabricated by 3D printing to investigate the potential application of this technology in dental ceramic restorations. MATERIAL AND METHODS: A typodont tooth was prepared for a ceramic crown, and a digital crown was designed using the CAD software. The digital crown was processed either with a 3D-printing system or with a dental milling system. The crowns were scanned using a dental laboratory scanner, and the data collected for each crown were divided into 4 parts (the external surface, intaglio surface, marginal area, and intaglio occlusal surface). Finally, the trueness of each part was determined using the 3D inspection software. The 3D trueness of the crowns fabricated by either 3D printing or milling was compared by a 1-sided test (α=.05). RESULTS: The trueness of the external surface, intaglio surface, marginal area, and intaglio occlusal surface of the 3D-printed crowns was no worse than the corresponding trueness of the CAD-CAM crowns (P<.05). CONCLUSIONS: Zirconia crowns produced by 3D printing meet the trueness requirements, and 3D printing may be suitable for fabricating zirconia crowns.

Simulation and evaluation of tablet-coating burst based on finite element method.

The objective of this study was to simulate and evaluate the burst behavior of coated tablets. Three-dimensional finite element models of tablet-coating were established using software ANSYS. Swelling pressure of cores was measured by a self-made device and applied at the internal surface of the models. Mechanical properties of the polymer film were determined using a texture analyzer and applied as material properties of the models. The resulted finite element models were validated by experimental data. The validated models were used to assess the factors those influenced burst behavior and predict the coating burst behavior. The simulation results of coating burst and failure location were strongly matched with the experimental data. It was found that internal swelling pressure, inside corner radius and corner thickness were three main factors controlling the stress distribution and burst behavior. Based on the linear relationship between the internal pressure and the maximum principle stress on coating, burst pressure of coatings was calculated and used to predict the burst behavior. This study demonstrated that burst behavior of coated tablets could be simulated and evaluated by finite element method.

In vitro and in vivo effect of paclitaxel and cepharanthine co-loaded polymeric nanoparticles in gastric cancer.

PURPOSE: Response surface methodology (RSM) using the central composite rotatable design (CCRD) model was used to optimize the formulation of paclitaxel (PTX)-cepharanthine (CEP) nanoparticles for gastric cancer. METHODS: Nanoparticles were prepared using nanoprecipitation technique and optimized using central composite rotatable design response surface methodology (CCRD-RSM). Further the optimized nanoparticles were characterised for particle size (PS), zeta potential, entrapment efficiency (EE), drug loading efficiency (DL), anticancer potential against MKN45 (human gastric cancer) cells, in vivo tumor inhibition and survival analysis. RESULTS: Significant findings were the optimal formulation of polymer concentration of 48 mg, surfactant concentration of 45% and EE of 98.12%, DL of 15.61% and mean diameter of 198±4.7 nm. The encapsulation of PTX/CEP into nanoparticles retained the synergistic anticancer efficiency against MKN45 cells. In the in vivo evaluation, PTXsCEP nanoparticles delivered into mice by intravenous injection significantly improved the antitumor efficacy of PTX/CEP. Moreover, PTX/CEP co-loaded nanoparticles substantially increased the overall survival in an established MKN45-transplanted mouse model. CONCLUSION: These data are the first to demonstrate that PTX/CEP co-loaded nanoparticles increased the anticancer efficacy in cell lines and xenograft mouse model. Our results suggest that PTX/CEP coloaded nanoparticles could be a potential useful chemotherapeutic formulation for gastric cancer.

In vitro comparison of guide planes for removable partial dentures prepared with CAD-CAM-assisted templates, guiding rod templates, and freehand.

OBJECTIVES: This study aimed to evaluate the accuracy of computer-aided design and computer-aided manufacturing (CAD-CAM)-assisted templates (CCAT), guiding rod templates (GRT), and freehand (FH) preparation of guide planes. METHODS: Forty-five identical maxillary resin casts were divided into three groups, in which the guide planes of the two abutment teeth were prepared using a CCAT (n=15), GRT (n=15), and FH (n=15). The CCAT and GRT were digitally designed on a digital cast of virtually prepared guide planes and fabricated using three-dimensional printing (3DP) technology. To assess the 3D trueness, the prepared guide planes were digitally scanned and compared to the virtually designed guide planes. The angle deviation was measured to assess the trueness of the direction of the guide plane preparation. Shapiro-Wilk and Levene's tests were used to check the normality and equivalence of the variance of the data. The data were compared by using the Kruskal‒Wallis H test (α=0.05). RESULTS: The CCAT group exhibited significantly better 3D trueness (78.5±19.8 µm) than the GRT group (211.3±42.4 µm, p<0.05) and the FH group (198.9±44.3 µm, p<0.05). Additionally, the CCAT group (1.31±0.50°) showed significantly smaller direction trueness compared to the GRT (4.65±0.72°, p<0.05) and FH (5.64±0.70°, p<0.05) groups. CONCLUSIONS: The novel CAD-CAM-assisted template significantly improved the quality of the guide planes compared with the GRT and FH procedures. This enhancement suggests that removable partial dentures can be predictably inserted immediately after guide plane preparation. CLINICAL SIGNIFICANCE: CAD-CAM-assisted templates improve the quality of guide plane preparation.

Effects of Surface Textures Created Using Additive Manufacturing on Shear Bond Strength Between Resin and Zirconia.

PURPOSE: This investigation aimed to assess the impact of additive manufacturing-generated surface textures on zirconia bond strength. MATERIALS AND METHODS: Zirconia samples (n = 144) fabricated using digital light-processing (DLP) technology were categorized into 6 groups according to the type of surface conditioning (group NN: no designs, no air abrasion; group NY: no designs, with air abrasion; group GN: groove designs, no air abrasion; group GY: groove designs with air abrasion; group HN: hexagon grid, no air abrasion; group HY: hexagon grid, with air abrasion). Composite resin cylinders were cemented to the treated zirconia surfaces with dual-curing, self-adhesive resin cement (Clearfil SA Luting). The shear bond strength (SBS) was tested after water storage for 3 days or 3 days with an additional 10,000 thermocycles. RESULTS: The zirconia samples fabricated using DLP technology have high accuracy. The SBS of the NY, GY, and HY groups did not significantly differ after 3 days, and neither did the SBS of the NN, GN, and HN groups. The NN, NY, and HY groups exhibited reduced SBS compared to their initial values following artificial aging, while the SBS of the remaining three groups were not diminished. The GY group obtained the highest SBS value after aging. CONCLUSION: Printing grooves with air abrasion can improve the bond strength.

A penicillinase-modified poly(N-isopropylacrylamide-co-acrylamide) smart hydrogel biosensor with superior recyclability for sensitive and colorimetric detection of penicillin G.

Antibiotics are widely used for treating bacterial infections. However, excessive or improper use of antibiotics can pose a serious threat to human health and water environments, and thus, developing cost-effective, portable and effective strategies to analyze and detect antibiotics is highly desired. Herein, we reported a responsive photonic hydrogel (RPH)-based optical biosensor (PPNAH) with superior recyclability for sensitive and colorimetric determination of a typical ß-lactam antibiotic penicillin G (PG) in water. This sensor was composed of poly(N-isopropylacrylamide-co-acrylamide) smart hydrogel with incorporated penicillinase and Fe3O4@SiO2 colloidal photonic crystals (CPCs). The sensor could translate PG concentration signals into changes in the diffraction wavelength and structural color of the hydrogel. It possessed high sensitivity and selectivity to PG and excellent detection performances for other two typical ß-lactam antibiotics. Most importantly, due to the unique thermosensitivity of the poly(N-isopropylacrylamide) moieties in the hydrogel, the PG-responded PPNAH sensor could be facilely regenerated via a simple physical method at least fifty times while without compromising its response performance. Besides, our sensor was suitable for monitoring the PG-contaminated environmental water and displayed satisfactory detection performances. Such a sensor possessed obvious advantages of superior recyclability, highly chemical stability, low production cost, easy fabrication, wide range of visual detection, simple and intuitive operation for PG detection, and environmental-friendliness, which holds great potential in sensitive and colorimetric detection of the PG residues in polluted water.

Multifunctional targeting of docetaxel plus bakuchiol micelles in the treatment of invasion and metastasis of ovarian cancer.

The invasion and metastasis of tumors pose significant challenges in the treatment of ovarian cancer (OC), making it difficult to cure. One potential treatment approach that has gained attention is the use of matrix metalloproteinase reactive controlled release micelle preparations. In this study, we developed a novel PEG5000-PVGLIG-hyaluronic acid docetaxel/bakuchiol (PP-HA-DTX/BAK) micelles formulation with desirable characteristics such as particle size, narrow polydispersity index, and a ZETA potential of approximately -5 mV. The surface modification with HA facilitates tumor penetration into the tumor interior, while the incorporation of DSPE-PEG2000-PVGLIG-PEG5000helps conceal DSPE-PEG2000-HA, reducing off-target effects and prolonging drug circulation timein vivo. Bothin vitroandin vivoexperiments demonstrated that these micelles effectively inhibit proliferation, invasion, and metastasis of OC cells while promoting apoptosis. Therefore, our findings suggest that PP-HA-DTX/BAK micelles represent a safe and effective therapeutic strategy for treating OC.

Effective Management of Acute Oral Chemical Burns After NaOH Ingestion: A Case Report.

BACKGROUND Chemical burns in the oral cavity, although rare, cause more severe tissue damage than thermal burns, continuing tissue destruction even after removing the causative substance. Prompt identification of the substance, exposure extent, time from injury to treatment, and the injured area are imperative for effective management. This report details severe oral burns in an elderly woman from accidental NaOH ingestion. CASE REPORT A 70-year-old female patient was presented to our hospital approximately 15 h after inadvertent consumption of approximately 20 ml of NaOH (sodium hydroxide) solution. This incident led to oral discomfort and restricted mouth opening. The ingested solution, erroneously assumed to be a beverage, was later identified as a potent alkaline substance typically employed in grease removal. Initial manifestations included intense burning sensation, oral edema, and heightened salivation, which exacerbated on the following day, adversely impacting her alimentation and verbal communication. Clinical examination disclosed extensive damage to the oral mucosa. The diagnosis encompassed a chemical burn in the oral cavity coupled with chronic gastritis. The treatment regimen comprised dietary limitations, administration of famotidine for gastric acid suppression, intravenous hydration, nutritional support, oral care with Kangfuxin liquid, and nebulization therapy. Six months after therapy, she exhibited complete recovery, with the absence of discomfort and restored normal oral functions. CONCLUSIONS Timely and targeted treatment strategies, particularly nebulization medication and Kangfuxin liquid, are effective in managing chemical burns in the oral cavity, promoting wound healing, and preventing complications.

Portable diagnosis method of hyperkalemia using potassium-recognizable poly(N-isopropylacrylamide-co-benzo-15-crown-5-acrylamide) copolymers.

A novel, simple, portable, and low-cost method for diagnosis of hyperkalemia by using K(+)-recognizable poly(N-isopropylacrylamide-co-benzo-15-crown-5-acrylamide) [poly(NIPAM-co-B15C5Am)] linear copolymer as indicator is presented in this work. The pendent 15-crown-5 units in the linear copolymers can selectively and specifically recognize K(+) to form stable 2:1 "sandwich" host-guest complexes, which cause the copolymer chains to change from the hydrophilic state to the hydrophobic state isothermally, whereas other tested metal ions (e.g., Li(+), Na(+), Cs(+), Mg(2+), Ca(2+), Sr(2+), Ba(2+), Cu(2+), Fe(3+), Pb(2+), Cd(2+), Cr(3+)) cannot be recognized. With increasing the 15-crown-5 content or the K(+) concentration, the poly(NIPAM-co-B15C5Am) linear copolymers exhibit higher sensitivity to K(+). The hyperkalemia can be simply diagnosed by observing the K(+)-induced optical transmittance change of human blood samples with poly(NIPAM-co-B15C5Am) linear copolymer as an indicator. Normal blood samples with low potassium level containing the poly(NIPAM-co-B15C5Am) linear copolymer are almost transparent since the copolymer is hydrophilic and soluble at the operating temperature. However, severe hyperkalemia samples with high potassium level become completely cloudy since the copolymer is hydrophobic and insoluble at this temperature. The presented diagnosis method with poly(NIPAM-co-B15C5Am) linear copolymer as indicator is quite simple and low-cost, and it would bring a new candidate material to design simple and portable tools for diagnosis of hyperkalemia in the general population. Moreover, the results in this work provide valuable guidance for building novel poly(NIPAM-co-B15C5Am)-based artificial K(+)-recognizable "smart" or "intelligent" systems in various application fields.

[Changes in lymphocyte surface expression of CD8 and CD38 molecules in peripheral blood of inactive HBsAg carriers following pegylated interferon a-2a therapy].

OBJECTIVE: To investigate the effects of pegylated interferon a-2a (Peg-INFa-2a) treatment on expression of CD8 and CD38 surface molecules on lymphocytes from peripheral blood of inactive hepatitis B surface antigen (HBsAg) carriers. METHODS: Forty-four patients with hepatitis B virus (HBV) chronic infection (CHB) received a 48-week course of Peg-INFa-2a treatment, with 30 administered 135 mug/week and 14 administered 180 mug/week. Every 12 weeks of treatment, the subjects were assessed for HBsAg titer, presence of anti-hepatitis B e (HBe) antibody, serum alanine amino transaminase (ALT) levels, and lymphocyte surface expression of CD8 and CD38 molecules. Patients were classified as responders and non-responders according to standard parameters. Dynamic differences between the two groups over time were assessed by multivariate repeated measures ANOVA with Greenhouse-Geisser correction and differences at single time points were assessed by univariate ANOVA. Linear regression analysis was performed to evaluate the relationship of two variables. RESULTS: The responders showed a significantly higher increase in ALT at week 12 (60.75+/-24.95 U/L vs. non-responders: 37.03+/-18.45 U/L; t = 2.905, P less than 0.01) and significantly higher proportion of CD8+CD38+ cells at week 24 (71.20+/-11.70% vs. non-responders: 56.79+/-7.72%; F = 23.941, P less than 0.01). The decline in level of HBsAg at week 24 was positively correlated with the increase in ALT level at week 12 (r = 0.386, P less than 0.01) and with expression levels of CD8 and CD38 molecules on lymphocytes at week 24 (r = 0.397, P less than 0.01). CONCLUSION: Lower baseline levels of HBsAg correlated to better Peg-INFa-2a-related HBsAg clearance. Increased expression of CD8 and CD38 on lymphocytes is suggestive of intensive cellular immunity in CHB patients and may be related to HBV-induced hepatocyte damage and may promote the HBsAg clearance.

[An analysis of surgical outcome and influencing factors in patients of congenital basilar invagination with atlantal-axial dislocation: report of 120 cases].

OBJECTIVE: To investigate the surgical outcome and its influencing factors in patients of congenital basilar invagination (BI) with atlanto-axial dislocation (AAD). METHODS: From May 2004 to August 2010, 120 patients who had BI with AAD were surgically treated with direct posterior intraoperative distraction-reduction and fixation technique, 93 patients were successfully followed up by means of questionnaire survey, telephone and clinical evaluation. Pre- and postoperative dynamic cervical X-rays, computed tomographic scans, 3-dimentional reconstruction views and magnetic resonance imaging were performed. Pre- and postoperative Japanese Orthopaedic Association (JOA) score, distance between odontoid tip and Chamberlain's line and atlantodental interval were measured to evaluate the surgical result. Statistical analysis was performed by means of paired t test and Pearson Correlation analysis. RESULTS: There were 93 cases were followed up for 24-99 months with an average of 46.5 months. Until the final follow-up, clinical symptoms were improved in 79 patients (84.9%), and were stable in 7 patients (7.5%) and deteriorated in 4 patients (4.3%). Three patients died postoperatively (3.2%). Patients without intramedullary signal intensity change (ISIC) had better surgical outcome. Patients with compression from anterior odontoid tip and posterior bone margin of occipital foramen had the worst surgical outcome (F = 3.987, P < 0.01). Overall, good decompression and bone fusion were shown on postoperative image in 87 patients (93.5%). There were 3 deaths in this series because of basilar artery thrombosis, posterior fossa hematoma and unknown reasons each. CONCLUSIONS: The direct posterior intraoperative distraction-reduction and fixation technique is an effective simple and safe method for the treatment of BI with AAD. Anterior compression from odontoid tip and posterior compression from bone margin of occipital foramen-atlantal posterior arch play important roles in its developing mechanism. ISIC on MRI is a predictive factor for the worse surgical outcome.

Surface Texture Designs to Improve the Core-Veneer Bond Strength of Zirconia Restorations Using Digital Light Processing.

Veneered zirconia ceramics are widely used for dental restorations. However, the relatively poor bonding strength between the ceramic core and veneer porcelain remains a common problem in clinical applications. To address this issue, this study focused on enhancing the core-veneer bond strength of zirconia restorations through the implementation of surface textures using digital light processing (DLP) technology. The light intensity was precisely tuned to optimize mechanical strength and minimize light scattering. Subsequently, hexagonal or square grids were printed on the surface of the zirconia ceramic core. Following veneering procedures, the shear bond strength (SBS) test was conducted using a universal testing machine. Dates were compared using analysis of variance (ANOVA) and the least significant difference (LSD) test. Furthermore, optical microscopy and scanning electron microscopy (SEM) were used to examine the failure modes and observe the cross-sectional structures, respectively. The results indicated that the presence of a 0.09 mm high hexagon grid led to a significant 21% increase in the SBS value. However, grids with heights of 0.2 and 0.3 mm showed less improvement, owing to the formation of large defects at the interface during the fusion process. This study demonstrated the potential of DLP technology in preparing zirconia ceramics with complex structures and high mechanical strength, thereby offering promising solutions for overcoming challenges associated with dental applications.

Digital fabrication of complete dentures using a combination of additive and subtractive manufacturing technologies.

Fabrication of complete dentures in the traditional way is a labor-intensive and time-consuming method. This article reports a series of novel digital methods for impression making, design and fabrication processes for complete dentures. It is highly anticipated that this novel method could improve the efficiency and accuracy of the design and fabrication of complete dentures.