Dynamics of Nanocomposite Hydrogel Alignment during 3D Printing to Develop Tissue Engineering Technology.

Taking inspiration from spider silk protein spinning, we developed a method to produce tough filaments using extrusion-based 3D bioprinting and salting-out of the protein. To enhance both stiffness and ductility, we have designed a blend of partially crystalline, thermally sensitive natural polymer gelatin and viscoelastic G-polymer networks, mimicking the components of spider silk. Additionally, we have incorporated inorganic nanoparticles as a rheological modifier to fine-tune the 3D printing properties. This self-healing nanocomposite hydrogel exhibits exceptional mechanical properties, biocompatibility, shear thinning behavior, and a well-controlled gelation mechanism for 3D printing.

Corticosteroid Injection Methods for Frozen Shoulder: A Network Meta-analysis.

OBJECTIVE: To investigate the efficacy of corticosteroid (CS) injection methods for frozen shoulder. DATA SOURCES: PubMed, Embase, and Cochrane Library were searched up to May 6, 2023. STUDY SELECTION: Randomized controlled trials (RCTs) that investigated CS injection methods for frozen shoulder were included. DATA EXTRACTION: Data were extracted independently by 2 authors. Risk of bias was assessed using the RoB 2 tool. DATA SYNTHESIS: A random-effects network meta-analysis was performed within a frequentist framework. The certainty of evidence was evaluated using the Grading of Recommendations, Assessment, Development, and Evaluations approach. A total of 66 RCTs involving 4491 patients were included. For short-term outcomes, 4-site injection (vs placebo [PLA]: standardized mean difference [SMD]=-2.20, 95% confidence interval [CI], -2.81 to -1.59 in pain; SMD=2.02; 95% CI, 1.39-2.65 in global function) was the most effective (low certainty). Rotator interval injection was the optimal treatment with moderate to high certainty (vs PLA: SMD=-1.07, 95% CI, -1.51 to -0.64 in pain; SMD=0.94, 95% CI, 0.49-1.40 in global function). For midterm outcomes, 4-site injection was most effective (vs PLA: SMD=-1.71, 95% CI, -2.41 to -1.01 in pain; SMD=2.22, 95% CI, 1.34-3.09 in global function; low certainty). Distension via rotator interval (D-RI) was the optimal treatment with moderate to high certainty (vs PLA: SMD=-1.10, 95% CI, -1.69 to -0.51 in pain; SMD=1.46, 95% CI, 0.73-2.20 in global function). Distension and intra-articular injection via anterior or posterior approaches produced effects equivalent to those of rotator interval injection and D-RI. CONCLUSIONS: Rotator interval injection, distension, and intra-articular injection had equivalent effects on symptom relief. More RCTs are required to validate the superiority of multisite injections.

Correlation between patient satisfaction and color changes after tooth bleaching.

OBJECTIVE: This study aimed to investigate the relationship between patient satisfaction of outcomes and tooth color changes during and after tooth bleaching. METHODS: In this clinical trial, 63 volunteers participated in an in-office bleaching procedure using a 40% hydrogen peroxide gel. The treatment consisted of two sessions, each comprising two 30-min applications of the bleaching gel. The L*, a*, and b* values of six maxillary anterior teeth were measured at baseline (T1), after the first bleaching session (T2), after the second bleaching session (T3), 1 week after the second in-office bleaching session (T4), and 3 weeks after the second in-office bleaching session (T5). The color differences (ΔE00 ) were calculated using CIEDE2000. A satisfaction scale with a score ranging from 0 to 3 was used to record participants' level of satisfaction with their tooth color at each time point. The data were statistically analyzed using repeated measures analysis of variance and logistic regression (α = 0.05). RESULTS: Significant correlations were observed between ΔL*, Δb*, and ΔE00 values at T3 and patient satisfaction (all p < 0.05). The regression model indicated a more pronounced impact of Δb* on patient satisfaction compared to ΔL*. The established regression models were as follows: Logit (PL*b* ) = -4.354 + 0.271ΔL* - 0.585Δb* and Logit (PΔE00 ) = -2.552 + 0.521ΔE00 . The findings suggested a minimum ΔE00 value of 4.90 for satisfactory results. A minimum ΔE00 value of 3.9, 5.0, and 6.8 was necessary for central incisors, lateral incisors, and canines, respectively, to achieve a satisfactory result. CONCLUSIONS: The ΔL*, Δb*, and ΔE00 values were found to be significantly correlated with patient satisfaction after bleaching. Δb* was identified as having a greater influence on patient satisfaction than ΔL* values in the regression model. Furthermore, attaining a minimum ΔE00 value of 4.90 is necessary to achieve satisfactory outcomes. A greater ΔE00 value is needed for canines than for incisors to achieve equivalent patient satisfaction. CLINICAL SIGNIFICANCE: This study emphasizes the importance of considering the extent of color change needed to achieve patient satisfaction after tooth bleaching procedures.

Optical properties of recycled zirconia for dental applications.

STATEMENT OF PROBLEM: While waste zirconia can be recycled, whether the optical properties of recycled zirconia match those of commercially available zirconia is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the optical properties of recycled zirconia by assessing its color, translucency, and opalescence across different thicknesses and shades. MATERIAL AND METHODS: Sixty specimens were prepared from 3 mol% yttria-stabilized tetragonal zirconia polycrystal blocks (Lava Plus; 3M ESPE) (group C); 60 other specimens were prepared from waste blocks of the same zirconia (group R). The specimens were further categorized into 4 subgroups (n=15) based on their thicknesses (1.0 mm or 1.5 mm) and shades (A1 or A3). Specimen color was measured with a spectrophotometer (Easyshade Advance 4.0; Vita ZahnFabrik). The parameters of color difference (ΔE00), translucency (TP), contrast ratio (CR), and opalescence (OP) were calculated. Grain size analysis was performed using scanning electron microscopy. Data were analyzed with analysis of variance (ANOVA) (α=.05). RESULTS: Significant differences in translucency and opalescence were observed between groups C and R in all specimens (P<.001). Group R exhibited a range of TP (4.89 to 11.27), CR (0.74 to 0.91), and OP (3.36 to 8.65) values. The ΔE00 values between groups C and R ranged from 13.99 to 21.31. Both thickness and shade significantly affected the ΔE00 values (P<.001). The grain size in group C was not significantly different from that in group R (F=0.364, df=1, P=.555). The TP and OP values of group R decreased with increasing thickness (P<.001). CONCLUSIONS: Recycled zirconia was less translucent and opalescent than commercially available zirconia. The color difference between commercially available and recycled zirconia exceeded the acceptable threshold, even when using the same staining procedure. Recycled zirconia exhibited reduced translucency and opalescence with increasing thickness.

Decellularized Extracellular Matrix for Remodeling Bioengineering Organoid's Microenvironment.

Over the past decade, stem cell- and tumor-derived organoids are the most promising models in developmental biology and disease modeling, respectively. The matrix is one of three main elements in the construction of an organoid and the most important module of its extracellular microenvironment. However, the source of the currently available commercial matrix, Matrigel, limits the application of organoids in clinical medicine. It is worth investigating whether the original decellularized extracellular matrix (dECM) can be exploited as the matrix of organoids and improving organoid construction are very important. In this review, tissue decellularization protocols and the characteristics of decellularization methods, the mechanical support and biological cues of extraccellular matrix (ECM), methods for construction of multifunctional dECM and responsive dECM hydrogel, and the potential applications of functional dECM are summarized. In addition, some expectations are provided for dECM as the matrix of organoids in clinical applications.

Nontarget Identification of Novel Organophosphorus Flame Retardants and Plasticizers in Rainfall Runoffs and Agricultural Soils around a Plastic Recycling Industrial Park.

Plastic recycling and reprocessing activities may release organophosphate ester (OPE) flame retardants and plasticizers into the surrounding environment. However, the relevant contamination profiles and impacts remain not well studied. This study investigated the occurrence of 28 OPEs and their metabolites (mOPEs) in rainfall runoffs and agricultural soils around one of the largest plastic recycling industrial parks in North China and identified novel organophosphorus compounds (NOPs) using high-resolution mass spectrometry-based nontarget analysis. Twenty and twenty-seven OPEs were detected in runoff water and soil samples, with total concentrations of 86.0-2491 ng/L and 2.53-199 ng/g dw, respectively. Thirteen NOPs were identified, of which eight were reported in the environment for the first time, including a chlorine-containing OPE, an organophosphorus heterocycle, a phosphite, three novel OPE metabolites, and two oligomers. Triphenylphosphine oxide and diphenylphosphinic acid occurred ubiquitously in runoffs and soils, with concentrations up to 390 ng/L and 40.2 ng/g dw, respectively. The downwind areas of the industrial park showed elevated levels of OPEs and NOPs. The contribution of hydroxylated mOPEs was higher in soils than in runoffs. These findings suggest that plastic recycling and reprocessing activities are significant sources of OPEs and NOPs and that biotransformation may further increase the ecological and human exposure risk.

Spatio-temporal variation of bacterial community structure in two intertidal sediment types of Jiaozhou Bay.

The intertidal sediment environment is dynamic and the biofilm bacterial community within it must constantly adapt, but an understanding of the differences in the biofilm bacterial community within sediments of different types is still relatively limited. The semi-enclosed Jiaozhou Bay has a temperate monsoon climate, with strong currents at the mouth of the bay. In this study, the structure of the bacterial community in Jiaozhou Bay sediment biofilms are described using high-throughput 16 S rRNA gene sequencing and the effects of temporal change and different sediment environment types are discussed. Alpha diversity was significantly higher in sandy samples than in muddy samples. Sandy sediments with increased heterogeneity promote bacterial aggregation. Beta diversity analysis showed significant differences between sediment types and between stations. Proteobacteria and Acidobacteria were significantly more abundant at ZQ, while Campilobacterota was significantly more abundant at LC. The relative abundances of Bacteroidetes, Campilobacterota, Firmicutes, and Chloroflexi were significantly higher in the muddy samples, while Actinobacteria and Proteobacteria were higher in the sandy samples. There were different phylum-level biomarkers between sediment types at different stations. There were also different patterns of functional enrichment in biogeochemical cycles between sediment types and stations with the former having more gene families that differed significantly, highlighting their greater role in determining bacterial function. Bacterial amplicon sequence variant variation between months was less than KEGG ortholog variation between months, presumably the temporal change had an impact on shaping the intertidal sediment bacterial community, although this was less clear at the gene family level. Random forest prediction yielded a combination of 43 family-level features that responded well to temporal change, reflecting the influence of temporal change on sediment biofilm bacteria.

Multifunctional porous poly (L-lactic acid) nanofiber membranes with enhanced anti-inflammation, angiogenesis and antibacterial properties for diabetic wound healing.

With increased diabetes incidence, diabetic wound healing is one of the most common diabetes complications and is characterized by easy infection, chronic inflammation, and reduced vascularization. To address these issues, biomaterials with multifunctional antibacterial, immunomodulatory, and angiogenic properties must be developed to improve overall diabetic wound healing for patients. In our study, we prepared porous poly (L-lactic acid) (PLA) nanofiber membranes using electrospinning and solvent evaporation methods. Then, sulfated chitosan (SCS) combined with polydopamine-gentamicin (PDA-GS) was stepwise modified onto porous PLA nanofiber membrane surfaces. Controlled GS release was facilitated via dopamine self-polymerization to prevent early stage infection. PDA was also applied to PLA nanofiber membranes to suppress inflammation. In vitro cell tests results showed that PLA/SCS/PDA-GS nanofiber membranes immuomodulated macrophage toward the M2 phenotype and increased endogenous vascular endothelial growth factor secretion to induce vascularization. Moreover, SCS-contained PLA nanofiber membranes also showed good potential in enhancing macrophage trans-differentiation to fibroblasts, thereby improving wound healing processes. Furthermore, our in vitro antibacterial studies against Staphylococcus aureus indicated the effective antibacterial properties of the PLA/SCS/PDA-GS nanofiber membranes. In summary, our novel porous PLA/SCS/PDA-GS nanofiber membranes possessing enhanced antibacterial, anti-inflammatory, and angiogenic properties demonstrate promising potential in diabetic wound healing processes.

Effects of Cathepsin K Inhibitors on Dentin Erosion: An in vitro Study.

Cathepsin K (catK) modulates the degradation of dentin collagen. This study aimed to evaluate the effects of catK inhibitors on dentin erosion. Dentin beams were eroded (4 times/d for 5 days) and immersed in deionized water (negative control), 0.1 M NaCl, 0.3 M NaCl, 0.5 M NaCl, or 1 µm odanacatib (each n = 16) for 30 min after each erosive challenge. Erosive dentin loss (EDL) and demineralized organic matrix (DOM) thickness were evaluated profilometrically. Additionally, dentin beams were demineralized, immersed in the respective solutions for 30 min each (n = 5), and then incubated in artificial saliva for 5 days. Dentin collage degradation was evaluated by quantifying the levels of the C-terminal peptide of type I collagen (CTX), C-terminal cross-linked telopeptide of type I collagen (ICTP), and hydroxyproline (HYP) in the incubation media. Significantly lower EDL and dentin collagen degradation (CTX, ICTP, and HYP) and thicker DOM layers were observed in the samples treated with 0.3 m NaCl and 1 µm odanacatib than in those treated with deionized water (all p < 0.05). The samples treated with 1 µm odanacatib showed significantly lower levels of CTX and HYP than those treated with 0.3 M NaCl (all p < 0.05). The present findings support the potential use of catK inhibitors in controlling dentin erosion.

Effects of protease inhibitors on dentin erosion: an in situ study.

OBJECTIVE: This in situ study aimed to evaluate the effects of the inhibitors of matrix metalloproteinases (MMPs) and cysteine cathepsins on dentin erosion. MATERIALS AND METHODS: Ten volunteers participated in this study. Each volunteer wore an intraoral appliance containing 4 dentin specimens subjected to different treatments: deionized water as a control, 1 mM 1,10-phenanthroline (an MMP inhibitor), 50 µM E-64 (a cysteine cathepsin inhibitor), and 1 mM 1,10-phenanthroline + 50 µM E-64. The specimens were dipped in 5 ml of the respective solutions for 30 min at room temperature and then exposed to in vivo erosive challenges by rinsing with 150 ml of a cola drink (4 × 5 min/day) for 7 days. The substance loss of the specimens was measured by profilometry. The transverse sections of the specimens were examined using scanning electron microscopy. Thereafter, the demineralized organic matrix (DOM) of the specimens was removed using type I collagen enzyme and assessed by performing profilometry. The differences in substance loss and DOM thickness among the groups were analyzed by one-way repeated-measures analysis of variance (ANOVA) and Bonferroni's test at a level of P < 0.05. RESULTS: Protease inhibitors significantly reduced substance loss in comparison to that of the control group (all P < 0.05). A significantly thicker DOM was observed for the specimens treated with protease inhibitors than for the control specimens (all P < 0.05). No significant differences in substance loss or DOM thickness were found among the MMP inhibitor, cysteine cathepsin inhibitor, and MMP + cysteine cathepsin inhibitor groups. CONCLUSIONS: The use of MMP and cysteine cathepsin inhibitors was shown to increase the acid resistance of human dentin, which may be due to the preservation of the DOM. CLINICAL RELEVANCE: The application of protease inhibitors could be considered an appropriate preventive strategy for dentin erosion.

Comparison of the performance of various virtual articulator mounting procedures: a self-controlled clinical study.

OBJECTIVES: This clinical study aimed to compare the performance of various virtual articulator (VA) mounting procedures in the participants' natural head position (NHP). MATERIALS AND METHODS: Fourteen participants with acceptable dentitions and jaw relationships were recruited in this study registered in the Clinical Trials Registry (#NCT05512455; August 2022). A virtual facebow was designed for virtual mounting and hinge axis measurement. Intraoral scans were obtained, and landmarks were placed on each participant's face to register the horizontal plane in NHP. Six virtual mounting procedures were performed for each participant. The average facebow group (AFG) used an indirect digital procedure by using the average facebow record. The average mounting group (AMG) aligned virtual arch models to VA's average occlusal plane. The smartphone facial scan group (SFG) and professional facial scan group (PFG) used facial scan images with Beyron points and horizontal landmarks, respectively. The cone-beam computed tomography (CBCT) scan group (CTG) used the condyle medial pole, and horizontal landmarks were applied. The kinematic facebow group (KFG) served as the control group, and a direct digital procedure was applied using a kinematic digital facebow and the 3D skull model. Deviations of the reference plane and the hinge axis between the KFG and other groups were calculated. The inter-observer variability in virtual mounting software operation was then evaluated using the interclass correlation coefficient (ICC) test. RESULTS: In virtual condylar center deviations, the CTG had the lowest condylar deviations. The AFG showed larger condylar deviations than PFG, SFG, and CTG. There was no statistically significant difference between the AFG and the AMG and between the PFG and the SFG. In reference plane deviations, the AMG showed the largest angular deviation (8.23 ± 3.29°), and the AFG was 3.89 ± 2.25°. The angular deviations of PFG, SFG, and CTG were very small (means of each group < 1.00°), and there was no significant difference among them. There was no significant difference between the researchers, and the ICC test showed moderate to excellent reliability for the virtual condylar center and good to excellent reliability for the reference plane in the operation of the virtual mounting software. CONCLUSIONS: CBCT scan provided the lowest hinge axis deviation in virtual mounting compared to average mounting, facebow record, and facial scans. The performance of the smartphone facial scanner in virtual mounting was similar to that of the professional facial scanner. Direct virtual mounting procedures using horizontal landmarks in NHP accurately recorded the horizontal plane. CLINICAL RELEVANCE: Direct digital procedures can be reliably used for virtual articulator mounting. The use of a smartphone facial scanner provides a suitable and radiation-free option for clinicians.

The activity, distribution, and colocalization of cathepsin K and matrix metalloproteases in intact and eroded dentin.

OBJECTIVES: This study aimed to assess the activity, distribution, and colocalization of cathepsin K (catK) and matrix metalloproteases (MMPs) in both intact and eroded dentin in vitro. MATERIALS AND METHODS: Eroded dentin was obtained by consecutive treatment with 5% citric acid (pH = 2.3) for 7 days, while intact dentin remained untreated. Pulverized dentin powder (1.0 g) was extracted from both intact and eroded dentin using 5 mL of 50 mM Tris-HCl buffer (0.2 g/1 mL, pH = 7.4) for 60 h to measure the activity of catK and MMPs spectrofluorometrically. In addition, three 200-µm-thick dentin slices were prepared from intact and eroded dentin for double-labeling immunofluorescence to evaluate the distribution and colocalization of catK and MMPs (MMP-2 and MMP-9). The distribution and colocalization of enzymes were analyzed using inverted confocal laser scanning microscopy (CLSM), with colocalization rates quantified using Leica Application Suite Advanced Fluorescent (LAS AF) software. One-way analysis of variance (ANOVA) was used to analyze the fluorescence data related to enzyme activity (α = 0.05). RESULTS: The activity of catK and MMPs was significantly increased in eroded dentin compared with intact dentin. After erosive attacks, catK, MMP-2, and MMP-9 were prominently localized in the eroded regions. The colocalization rates of catK with MMP-2 and MMP-9 were 13- and 26-fold higher in eroded dentin, respectively, than in intact dentin. CONCLUSIONS: Erosive attacks amplified the activity of catK and MMPs in dentin while also altering their distribution patterns. Colocalization between catK and MMPs increased following erosive attacks. CLINICAL RELEVANCE: CatK, MMP-2, and MMP-9 likely play synergistic roles in the pathophysiology of dentin erosion.

Comparison of occlusal contact errors of 6 chairside CAD/CAM crowns: a self-controlled clinical study.

OBJECTIVES: The purpose of this self-controlled clinical study was to evaluate the trueness of occlusal contacts of chairside CAD/CAM crowns fabricated using different ceramic materials. MATERIALS AND METHODS: Ten volunteers (8 females, 2 males, average aged 20-30) were recruited in this study registered in the Clinical Trials Registry (#NCT05346744). After tooth preparation on tooth 36 or 46, an optical scan unit (CEREC Omnicam, Sirona Dental Systems, Germany) was utilized to perform the intraoral scanning. For each volunteer, 6 crowns were fabricated via the chairside CAD/CAM process (CEREC, Sirona Dental Systems, Germany) using the following materials: InCoris TZI (ZIR), Celtra Duo (CD), e.max CAD (EMA), UP.CAD (UP), Enamic (ENA) and Hyramic (HY). The microhardness of the milled surfaces was measured through a Vickers hardness Tester (HVS-50Z, Trojan, China). Together with the amount of occlusal adjustment, the occlusal contact trueness at both milling and postprocessing stages were quantitatively analyzed by using a high-precision scanner (ATOS, GOM Technologies, USA) and a reverse engineering software (Geomagic Control, 3D Systems, Rock Hill, SC). The times of chairside occlusal adjustment were also recorded. Data were analyzed by one-way analysis of variance (ANOVA) and ANOVA with randomized block design followed by Bonferroni test (p = 0.05). RESULTS: Significant differences were found in surface microhardness of the materials tested (CD > EMA ~ UP > ENA > HY > ZIR, p < 0.05). Regarding the occlusal contact trueness at milling stage, ZIR showed the lowest (p < 0.05), while no significant difference was found among others (p > 0.05). At postprocessing stage, except for ENA, the occlusal contact trueness of ZIR was significantly lower than that of others (p < 0.05). As for occlusal adjustment amount, ZIR was lower than CD and ENA (p < 0.05). In addition, ENA, HY and ZIR required fewer times of occlusal adjustment than EMA, UP and CD. CONCLUSIONS: The type of chairside CAD/CAM ceramic materials affected the occlusal contact trueness throughout the process of manufacturing and the amount of clinical occlusal adjustment as well. Zirconia exhibited the worst occlusal contact trueness at both milling and postprocessing stages, while the amount of occlusal adjustment was the least, which recommended the least occlusal compensation. CLINICAL RELEVANCE: For better trueness, different negative occlusal offsets are suggested to be applied in the design process, so as to suit the material of the restoration.

Effect of smile esthetics on the quality of life in a Han Chinese population.

OBJECTIVE: This study aimed to explore the influence of smile esthetics on the quality of life in a Han Chinese population. METHODS: A total of 110 Han Chinese volunteers (52 males and 58 females, mean age 26.7 years) were recruited, and frontal images of their smiles were collected. A photoediting program was used to evaluate the following components of smile esthetics: the buccal corridor ratios, the angle between the interpupillary and commissural lines, the number of visible teeth, and width-to-length ratios of the maxillary central incisors. Oral health-related quality of life (OHRQoL) in these volunteers was evaluated using the Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) and Oral Health Impact Profile-14 (OHIP-14). Statistical analyses were performed by using Pearson's correlations and multiple linear regression (α = 0.05). RESULTS: Compared to males, females scored higher on psychological impact (p = 0.017). Moreover, the number of visible teeth had a significant effect on social impact, psychological impact and esthetic concern (all p < 0.05). However, the buccal corridor ratios, the angle between the interpupillary and commissural lines, and the width-to-length ratios of the maxillary central incisor did not correlate with the OHRQoL (all p > 0.05). CONCLUSIONS: The number of visible teeth significantly influenced the quality of life in a Han Chinese population. Smile esthetics had a significantly greater psychological impact on females than males. CLINICAL SIGNIFICANCE: This study highlights the effects of smile esthetics on the quality of life in a Han Chinese population. Female patients may raise more esthetic concerns in clinical practice.

In situ self-sacrificial synthesis of polypyrrole/biochar composites for efficiently removing short- and long-chain perfluoroalkyl acid from contaminated water.

Efficient removal of perfluoroalkyl acids (PFAAs), especially short-chain ones, from contaminated water is of great challenge and is urgently called for so as to safeguard the ecosystem and human health. Herein, polypyrrole (PPy) functionalized biochar (BC) composites were innovatively synthesized by an in situ self-sacrificial approach to allow efficient capture of PFAAs with different chain lengths. Compared with conventional PPy-based composites synthesized by direct polymerization using FeCl3 as an oxidizing agent, PPy/BC composites were fabricated utilizing freshly generated Fe3+ as an oxidizing agent from self-sacrificial Fe3O4 for pyrrole monomers in situ polymerizing on BC. As a result, with the support of BC and gradual release of Fe3+, PPy overcame its tendency to aggregate and became uniformly dispersed on BC, and meanwhile, PPy could well tailor the surface chemistry of BC to endow its positively charged surface. Consequently, the composites exhibited strong sorption capacities of 3.89 and 1.53 mmol/g for short-chain perfluorobutanoic acid (PFBA) and perfluorobutane sulfonic acid (PFBS), 2.55 and 1.22 mmol/g for long-chain perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), respectively, which were superior to those of pristine BC, commercial activated carbon, and anion exchange resins reported. Additionally, they could effectively remove 17 different classes of per- and polyfluoroalkyl substances (PFAS) (removal >95%) from actual PFAS-contaminated water, and the spent sorbent could be well regenerated and reused at least 5 times. An integrated analysis indicated that such an outstanding PFAA sorption performance on PPy/BC composites could be mainly attributed to surface adsorption enhanced by electrostatic attractions (anion exchange interaction) with the traditional hydrophobic interaction and pore filling of less contribution, particularly for short-chain analogues. These results are expected to inform the design of BC with greater ability to remove PFAS from water and the new sorbent could help water facilities comply with PFAS regulations.

Effect of multiple firings on the marginal fit of monolithic zirconia crowns: An in vitro study.

STATEMENT OF PROBLEM: Speed sintering was introduced to save chair time and produce monolithic zirconia restorations in a single visit. Multiple firings are usually required clinically for both speed-sintered and conventionally sintered monolithic zirconia crowns. However, the effects of multiple firings on the marginal fit of speed-sintered and conventionally sintered monolithic zirconia crowns are unknown. PURPOSE: The purpose of this in vitro study was to investigate the effect of multiple firings on the marginal fit of speed-sintered and conventionally sintered monolithic zirconia crowns. MATERIAL AND METHODS: Twenty conventionally sintered and 20 speed-sintered monolithic zirconia crowns were milled, sintered, and repeatedly fired by using conventional sintering and speed sintering furnaces. The absolute marginal discrepancy of the crowns was measured with a measuring microscope at ×100 magnification after sintering (T0) and after the first (T1), second (T2), and third firings (T3). Two-way repeated-measures ANOVA was used to detect the impact of multiple firings on the absolute marginal discrepancy of conventionally sintered and speed-sintered monolithic zirconia crowns and the differences between the 2 materials (α=.05). RESULTS: Multiple firings improved the absolute marginal discrepancy of conventionally sintered and speed-sintered monolithic zirconia crowns (P<.001). The absolute marginal discrepancy of conventionally sintered monolithic zirconia crowns at T2 and T3 was significantly smaller than that at T1 (P=.008 and 0.016, respectively), and the absolute marginal discrepancy of speed-sintered monolithic zirconia crowns at T2 was significantly smaller than that at T1 (P=.015). The speed-sintered monolithic zirconia crowns had a better marginal fit than conventionally sintered monolithic zirconia crowns (P=.008). No significant interaction was found between the multiple firings and material types on the absolute marginal discrepancy of monolithic zirconia crowns (P=.914). CONCLUSIONS: Multiple firing cycles can significantly improve the marginal fit of conventionally sintered and speed-sintered monolithic zirconia crowns. The speed-sintered monolithic zirconia crowns have a better marginal fit (both vertically and horizontally) than the conventionally sintered monolithic zirconia crowns.

Optimal impression materials for implant-supported fixed complete dentures: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Although polyvinyl siloxane (PVS) materials and polyether (PE) materials have been the recommended materials for making impressions for implant-supported fixed complete dentures (IFCDs), a consensus regarding the optimal impression materials has yet to be established. PURPOSE: The purpose of this systematic review and meta-analysis was to evaluate the effect of impression materials on the accuracy of conventional impressions for IFCDs and to provide guidance for selecting the optimal impression material. MATERIAL AND METHODS: The PubMed, Web of Science, and Embase databases were searched and supplemented via hand searches. Studies comparing the accuracy of conventional impressions for IFCDs by using PVS and PE materials with either direct (open-tray) or indirect (closed-tray) techniques were included. Linear distance deviations and angular deviations between adjacent implants were evaluated. The mean difference (MD) with a 95% confidence interval (CI) was calculated for continuous data. A subgroup analysis was conducted to evaluate the impact of implant angulation (α=.05). RESULTS: Among the 597 publications identified, 27 in vitro studies were included for qualitative analysis, and 12 were included for quantitative analysis. The general analysis revealed no significant differences in linear distance and angular deviations between the 2 impression materials with the direct or indirect technique. The subgroup analysis found that a statistically significant difference in linear distance deviations was found when implants were placed at an angle greater than 15 degrees, favoring PE materials when using the direct technique (P=.010, MD: 32.54 µm; 95% CI: 6.83 to 58.24) and indirect technique (P=.020, MD: 138.15 µm, 95% CI: 19.17 to 257.13). However, only 2 relevant studies assessed the indirect technique. CONCLUSIONS: When providing IFCDs, conventional impressions obtained by using PVS and PE materials were found to have similar accuracy in most scenarios. PE materials yielded better outcomes when implants were placed at an angle greater than 15 degrees.

Effects of different removal methods of excess resin adhesive on the microleakage of alumina all-ceramic crowns.

BACKGROUND: Microleakage is a common problem that affects the quality and longevity of all-ceramic crowns. It is influenced by factors such as the resin cement, crown margin design and curing technique. However, few studies focus on the effect of different methods of removing excess resin adhesive on the microleakage of all-ceramic crowns. This study aimed to compare two methods of removing excess resin adhesive (the small brush and sickle methods) on the microleakage of all-ceramic crowns with different marginal clearances. METHODS: Forty extracted third molars were prepared with a 90° shoulder margin and randomly divided into four groups according to their marginal lift (30, 60, 90 or 0 µm). Procera alumina crowns were fabricated using computer-aided design/computer-aided modelling and cemented onto the teeth with 3 M RelyX Unicem (3 M Company, United States) resin cement. Excess resin cement was removed by either the small brush or the sickle scalpel method. The marginal adaptation was observed with a digital microscope. After thermal cycling of the teeth, microleakage was assessed using the dye penetration test under a stereomicroscope. The Mann-Whitney U test and Kruskal-Wallis H test were used to compare the microleakage scores among different groups. RESULTS: The small-brush group showed significantly better marginal adaptation and lower microleakage scores than the sickle group (p < 0.05). There was no significant difference in the microleakage score (grade 0) among different marginal clearances within each group (p > 0.05). CONCLUSION: The small-brush method was more effective than the sickle scalpel method in reducing the microleakage of all-ceramic crowns with different marginal clearances. This method can improve the marginal adaptation and sealability of all-ceramic crowns, thus preventing secondary caries and other complications.

Effects of mechanical force on proliferation and apoptosis of stem cells from human exfoliated deciduous teeth.

OBJECTIVES: This study was designed to explore the effects of mechanical force on the proliferation, apoptosis, and morphology of stem cells from human exfoliated deciduous tooth pulp (SHEDs). MATERIALS AND METHODS: Caries-free stranded deciduous teeth were extracted, and SHEDs were isolated through enzymatic digestion. The cultured SHEDs were subjected to different levels of mechanical stimuli (0, 100, 200, and 300 g) for 7 days (30 min/day) using external centrifugal force. Cell proliferation was evaluated with the CCK-8 assay, and the cell cycle and apoptosis were assessed by flow cytometry. The cell morphology was examined using transmission electron microscopy. RESULTS: Cell proliferation assay showed no differences between the three stimulation groups and the control group in day 1 to day 3. From the 4th day, cell proliferation was significantly lower in the mechanical force groups than in the control group, but no significant difference was observed among the three mechanical force groups. Besides, there was no significant difference in cell apoptosis among the four groups for 7 days. On day 7 after stimulation, the SHEDs were shrunken, with significantly increased isochromosome in the nucleus and an increase in lysosomes. CONCLUSIONS: Mechanical force can inhibit the proliferation and affect morphology of SHEDs, but it has no effect on cell apoptosis. CLINICAL RELEVANCE: Mechanical force stimulation significantly inhibited cell proliferation of SHEDs. Mechanical force stimulation had no significant effect on cell apoptosis of SHEDs. The morphology and ultrastructure of SHEDs changed after mechanical force stimulation.

A de novo variant of POLR3B causes demyelinating Charcot-Marie-Tooth disease in a Chinese patient: a case report.

BACKGROUND: Charcot-Marie-Tooth (CMT) disease is a group of inherited peripheral neuropathies, which are subdivided into demyelinating and axonal forms. Biallelic mutations in POLR3B are the well-established cause of hypomyelinating leukodystrophy, which is characterized by hypomyelination, hypodontia, and hypogonadotropic hypogonadism. To date, only one study has reported the demyelinating peripheral neuropathy phenotype caused by heterozygous POLR3B variants. CASE PRESENTATION: A 19-year-old male patient was referred to our hospital for progressive muscle weakness of the lower extremities. Physical examination showed muscle atrophy, sensory loss and deformities of the extremities. Nerve conduction studies and electromyography tests revealed sensorimotor demyelinating polyneuropathy with secondary axonal loss. Trio whole-exome sequencing revealed a de novo variant in POLR3B (c.3137G > A). CONCLUSIONS: In this study, we report the case of a Chinese patient with a de novo variant in POLR3B (c.3137G > A), who manifested demyelinating CMT phenotype without additional neurological or extra-neurological involvement. This work is the second report on POLR3B-related CMT.