Local response and emerging nonlinear elastic length scale in biopolymer matrices.

Nonlinear stiffening is a ubiquitous property of major types of biopolymers that make up the extracellular matrices (ECM) including collagen, fibrin, and basement membrane. Within the ECM, many types of cells such as fibroblasts and cancer cells have a spindle-like shape that acts like two equal and opposite force monopoles, which anisotropically stretch their surroundings and locally stiffen the matrix. Here, we first use optical tweezers to study the nonlinear force-displacement response to localized monopole forces. We then propose an effective-probe scaling argument that a local point force application can induce a stiffened region in the matrix, which can be characterized by a nonlinear length scale R* that increases with the increasing force magnitude; the local nonlinear force-displacement response is a result of the nonlinear growth of this effective probe that linearly deforms an increasing portion of the surrounding matrix. Furthermore, we show that this emerging nonlinear length scale R* can be observed around living cells and can be perturbed by varying matrix concentration or inhibiting cell contractility.

Isolation and characterization of intestinal bacteria associated with cellulose degradation in grasshoppers (Orthoptera).

Insect gut bacteria play an essential role in the nutritional metabolism, growth, and development of insects. Grasshoppers (Orthoptera) are cellulose-rich plant-feeding pests. Although the biological potential of grasshopper gut microorganisms to assist cellulose decomposition is well established, microbial resources for efficient degradation of cellulose biomass are still scarce and need to be developed. In this study, we used selective media to isolate cellulose-degrading bacteria from the intestines of Atractomorpha sinensis, Trilophidia annulata, Sphingonotus mongolicus, and Calliptamus abbreviatus. Phylogenetic analysis based on the maximum likelihood method using 16S rDNA sequencing sequences to identify bacteria revealed the isolation of 11 strains belonging to 3 genera, including Klebsiella, Aeromonas, and Bacillus. The degradability of the isolates to cellulose was then determined by the DNS colorimetric method, and the results showed that Bacillus had the highest degradation rate. The elucidation of microbial cellulose degradation capacity in grasshoppers not only contributes to the understanding of multiple plant-insect-microbe interactions, but also provides a valuable microbial resource for solving the biomass conversion of cellulose species problem.

Thermal degradation and combustion properties of most popular synthetic biodegradable polymers.

Various products made from biodegradable polymers have been increasing rapidly in the market since the use of non-biodegradable materials has been banned, particularly for the disabled packaging materials. Burning remains the most popular method that is increasingly used in treating city wastes. The impact of these polymers on environmental during thermal degradation and combustion is an important issue for city waste management. In this work, the thermal degradation and combustion behaviours of the most popular synthetic biodegradable polymers in the market, poly(lactide acid) (PLA), poly(e-caprolactone) (PCL), poly(butylene succinate) (PBS), poly(butylene adipate-co-terephthalate) (PBAT) and polyhydroxyalkenoates (PHA), are investigated. Both isothermal and non-isothermal thermal decomposition in oxygen and nitrogen environment were studied using thermogravimetric analysis combining with differential scanning calorimeter and coupled with Fourier transform infrared spectroscopy and gas chromatograph/mass spectroscopy. The combustion behaviour was investigated by a combustion colorimeter. The study results show that thermal degradation temperatures are PCL > PBS > PLA > PBAT > PHA. The thermal decomposition of all the polyesters started from scission reaction (cis-elimination), and then a stereoselective cis-elimination, which resulted in the formation of trans-crotonic acid and its oligomers. They all decomposed into CO2 and water in excess oxygen environment above 800°C. Various chemical products with smaller molecules were detected under oxygen-free conditions, including oligomers and unsaturated carboxylic acid. The order of the total heat release of the materials from high to low is as follows: PHA > PCL > PBAT > PBS > PLA. The combustion values of these polyesters are lower than those of polyolefins; thus, they will not damage furnace used currently. The results provide some important and useful data for managing these new city waste.

In Situ Formation of o-Phenylenediamine Cascade Polymers Mediated by Metal-Organic Framework Nanozymes for Fluorescent and Photothermal Dual-Mode Assay of Acetylcholinesterase Activity.

A fluorescent and photothermal dual-mode assay method was established for the detection of acetylcholinesterase (AChE) activity based on in situ formation of o-phenylenediamine (oPD) cascade polymers. First, copper metal-organic frameworks of benzenetricarboxylic acid (Cu-BTC) were screened out as nanozymes with excellent oxidase-like activity and confinement catalysis effect. Then, an ingenious oPD cascade polymerization strategy was proposed. That is, oPD was oxidized by Cu-BTC to oPD oligomers with strong yellow fluorescence, and oPD oligomers were further catalyzed to generate J-aggregation, which promotes the formation of oPD polymer nanoparticles with a high photothermal effect. By utilizing thiocholine (enzymolysis product of acetylthiocholine) to inhibit the Cu-BTC catalytic effect, AChE activity was detected through the fluorescence-photothermal dual-signal change of oPD oligomers and polymer nanoparticles. Both assay modes have low detection limitation (0.03 U L-1 for fluorescence and 0.05 U L-1 for photothermal) and can accurately detect the AChE activity of human serum (recovery 85.0-111.3%). The detection results of real serum samples by fluorescent and photothermal dual modes are consistent with each other (relative error ≤ 5.2%). It is worth emphasizing that this is the first time to report the high photothermal effect of oPD polymers and the fluorescence-photothermal dual-mode assay of enzyme activity.

Investigation of Microplastics in Digestion System: Effect on Surface Microstructures and Probiotics.

There are increasingly attentions on the pollution from microplastics, especially the impact on human health. This work focuses on one hand the effect of digestion system on the surface microstructures of microplastics from the most popular sources such as polypropylene, polyethylene, polyethylene terephthalate, polystyrene and polyvinyl chloride. On the other hand, how these microplastic affect probiotics in digestion system was also investigated to evaluate their toxicity on health. All the samples were treated by in vitro simulating digestion consisting of three phases: oral, gastric and intestinal. There were no physical differences observed by both Scanning Electronic Microscopy and Atomic Force Microscopy, and no significant chemical changes detected by both Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy after digestion treatment. The effect of these microplastics on tested strains were investigated by in vitro culture method and results showed that polystyrene microplastics could inhibit the growth of the Lactobacillus significantly. The results indicated that the digestion system could not decompose microplastics, even on the surfaces, since plastics are inert due to their low chemical reactivity, but the microplastics might lead to imbalance of intestinal microbiota.

Macrophage depletion in stellate ganglia alleviates cardiac sympathetic overactivation and ventricular arrhythmogenesis by attenuating neuroinflammation in heart failure.

Cardiac sympathetic overactivation is involved in arrhythmogenesis in patients with chronic heart failure (CHF). Inflammatory infiltration in the stellate ganglion (SG) is a critical factor for cardiac sympathoexcitation in patients with ventricular arrhythmias. This study aims to investigate if macrophage depletion in SGs decreases cardiac sympathetic overactivation and ventricular arrhythmogenesis in CHF. Surgical ligation of the coronary artery was used for induction of CHF. Clodronate liposomes were microinjected into bilateral SGs of CHF rats for macrophage depletion. Using cytokine array, immunofluorescence staining, and Western blot analysis, we found that macrophage expansion and expression of TNFα and IL-1ß in SGs were markedly increased in CHF rats. Flow cytometry data confirmed that the percentage of macrophages in SGs was higher in CHF rats than that in sham rats. Clodronate liposomes significantly reduced CHF-elevated proinflammatory cytokine levels and macrophage expansion in SGs. Clodronate liposomes also reduced CHF-increased N-type Ca2+ currents and excitability of cardiac sympathetic postganglionic neurons and inhibited CHF-enhanced cardiac sympathetic nerve activity. ECG data from 24-h, continuous telemetry recording in conscious rats demonstrated that clodronate liposomes not only restored CHF-induced heterogeneity of ventricular electrical activities, but also decreased the incidence and duration of ventricular tachycardia/fibrillation in CHF. Macrophage depletion with clodronate liposomes attenuated CHF-induced cardiac sympathetic overactivation and ventricular arrhythmias through reduction of macrophage expansion and neuroinflammation in SGs.

Dependence of the hydration status of bacterial light-harvesting complex 2 on polyol cosolvents.

Low molecular weight (MW) polyols are organic osmolytes influencing protein structure and activity. We have intended to investigate the effects of low MW polyols on the optical and the excited-state properties of the light-harvesting complex 2 (LH2) isolated from the photosynthetic bacterium Thermochromatium (Tch.) tepidum, a thermophile growing at ∼50 °C. Steady state spectroscopy demonstrated that, on increasing glycerol or sorbitol fractions up to 60% (polyol/water, v/v), the visible absorption of carotenoids (Crts) remained unchanged, while the near infrared Qy absorption of bacteriochlorophyll a (BChl) at 800 nm (B800) and 850 nm (B850) varied slightly. Further increasing the fraction of glycerol (but not sorbitol) to 80% (v/v) induced distinct changes of the near infrared absorption and fluorescence spectra. Transient absorption spectroscopy revealed that, following the fast processes of BChl-to-Crt triplet energy transfer, rather weak Qy signals of B800 and B850 remained and evolved in phase with the kinetics of triplet excited state Crt (3Crt*), which are attributed to the Qy band shift as a result of 3Crt*-BChl interaction. The steady state and the transient spectral responses of the Qy bands are found to correlate intimately with the water activity varying against polyol MW and mixing ratio, which are rationalized by the change of the hydration status of the C- and N-termini of LH2. Our results suggest that, with reference to the mesophilic purple bacterium Rhodobacter sphaeroides 2.4.1, Tch. tepidum adopts substantially more robust LH2 hydration against the osmotic effects from the low MW polyols.

Innovative method for the enrichment of high-polarity bioactive molecules present at low concentrations in complex matrices.

Ginsenoside Rg1 is a valuable bioactive molecule but its high polarity and low concentration in complex mixtures makes it a challenge to separate Ginsenoside Rg1 from other saponins with similar structures, resulting in low extraction efficiency. The successful development of effective Rg1 molecularly imprinted polymers that exhibit high selectivity and adsorption may offer an improved method for the enrichment of active compounds. In this work, molecularly imprinted polymers were prepared with two different methods, precipitation polymerization or surface imprinted polymerization. Comparison of the adsorption abilities showed higher adsorption of the surface molecularly imprinted polymers prepared by surface imprinted polymerization, 46.80 mg/g, compared to the 27.74 mg/g observed for the molecularly imprinted polymers prepared by precipitation polymerization. Therefore, for higher adsorption of the highly polar Rg1, surface imprinted polymerization is a superior technique to make Rg1 molecularly imprinted polymers. The prepared surface molecularly imprinted polymers were tested as a solid-phase extraction column to directionally enrich Rg1 and its analogues from ginseng tea and total ginseng extracts. The column with surface molecularly imprinted polymers showed higher enrichment efficiency and better selectivity than a C18 solid-phase extraction column. Overall, a new, innovative method was developed to efficiently enrich high-polarity bioactive molecules present at low concentrations in complex matrices.

Bacterial Succession on Rat Carcasses and Applications for PMI Estimation.

UNLABELLED: Abstract: OBJECTIVE: To investigate the bacterial succession on rat carcasses and to evaluate the use of bacterial succession for postmortem interval (PMI) estimation. METHODS: Adult female SD rat remains were placed in carton boxes. The bacterial colonization of circumocular skin, mouth and vagina was collected to be identified using culture-dependent biochemical methods. The changes in community composition were regularly documented. RESULTS: The bacterial succession in three habitats showed that Staphylococcus and Neisseria were predominated in early PMI, especially Staphylococcus aureus and Neisseria lactamica in 6 hours after death. Lactobacillus casei developed on the 3-4 days regularly, and kept stable at a certain level in late PMI. CONCLUSION: The involvement of normal and putrefactive bacteria in three body habitats of rat remains can be used for PMI estimation.

The aflatoxin-detoxifizyme specific expression in mouse parotid gland.

The aflatoxin-detoxifizyme (ADTZ) gene derived from Armillariella tabescens was cloned into parotid gland-specific expression vector (pPSPBGPneo) to construct the parotid gland-specific vector expressing ADTZ (pPSPBGPneo-ADTZ). Transgenic mice were generated by microinjection and identified by using PCR and Southern blotting analysis. PCR and Southern blotting analysis showed that total six transgenic mice carried the ADTZ gene were generated. RT-PCR analysis indicated that the expression of ADTZ mRNA could be detected only in parotid glands of the transgenic mice. The ADTZ activity in the saliva was found to be 3.72 ± 1.64 U/mL. After feeding a diet containing aflatoxin B1 (AFB1) for 14 days, the effect of ADTZ on serum biochemical indexes and AFB1 residues in serum and liver of mice were evaluated. The results showed that total protein and globulin contents in the test treatment (transgenic mice) produced ADTZ were significantly higher than that of the positive control, while alanine aminotransferase and aspartate aminotransferase activity in serum of the test treatment (transgenic mice) were remarkably lower compared to that of the positive control (P < 0.05). Moreover, AFB1 residues in serum and liver of the test treatment (transgenic mice) were significantly lower compared with that of the positive control (P < 0.05). These results in the study confirmed that ADTZ produced in transgenic mice could reduce, even eliminate the negative effects of AFB1 on mice.

Torsional resonance frequency analysis: a novel method for assessment of dental implant stability.

OBJECTIVES: To establish and experimentally validate a novel resonance frequency analysis (RFA) method for measurement of dental implant stability by analyzing torsional resonance frequency (TRF). MATERIAL AND METHODS: A numerical study and in vitro measurements were performed to evaluate the feasibility and reliability of the method of torsional RFA (T-RFA) using a T-shaped bilateral cantilever beam transducer. The sensitivity of this method was assessed by measuring the TRFs of dental implants with 8 sizes of T-shaped transducers during polymerization, which simulated the process of bone healing around an implant. The TRFs of the test implants detected using this new method and the bending resonance frequencies (BRFs) measured by Osstell(®) ISQ were compared. TRFs and BRFs on implant models in polymethyl methacrylate (PMMA) blocks with three exposure heights were also measured to assess the specificity of this method. RESULTS: Finite element analysis showed two bending modes (5333 and 6008 Hz) following a torsional mode (8992 Hz) in the lower rank frequency. During in vitro measurements, a bending formant (mean 6075 Hz) and a torsional formant (mean 10225 Hz) appeared, which were verified by multipoint measurement with invariable excitation frequency in the laboratory. In the self-curing resin experiments, the average growth rate at all time points of TRFs using the new method with Transducer II was 2.36% and that of BRFs using Osstell(®) ISQ was 1.97%. In the implant exposure height tests, the mean declined rate of TRFs was 2.06% and that of BRFs using Osstell(®) ISQ was 12.34%. CONCLUSION: A novel method for assessment of implant stability through TRF was established using a T-shape transducer, which showed high reliability and sensibility. The method alleviated the effects of implant exposure height on the measurements compared with Osstell(®) ISQ. The application of T-RFA represents another way in the investigation of dental implant osseointegration.

Ridge expansion alone or in combination with guided bone regeneration to facilitate implant placement in narrow alveolar ridges: a retrospective study.

OBJECTIVE: To evaluate the long-term outcomes of ridge expansion technique in dealing with horizontal bony insufficiency of alveolar ridges for implant placement. MATERIALS AND METHODS: During the period 2004-2009, 168 patients with width insufficiency of alveolar ridges were treated using the ridge expansion technique to obtain an improved bony base for implant placement. Depending on the severity of width insufficiency, the surgical procedures were classified into two groups: ridge expansion alone (Group 1) and ridge expansion in combination with guided bone regeneration (Group 2). After 4-6 months of unloaded healing, the implants were restored. The patients were followed up until 2013 with clinical and radiographic examinations. RESULTS: Among the 168 patients, 11 patients underwent a fracture of labial/buccal bony plate during surgery, which was corrected by changing the procedure into bone grafting, yielding a surgical failure rate of 6.5%. In the remaining 157 patients successfully treated by ridge expansion alone or in combination with GBR, 226 implants were simultaneously placed as planned. No implant failed over 2.8 years (6 months to 8 years) of follow-up, yielding a cumulative implant survival rate of 100% in each group. Six implants in Group 1 and 4 implants in Group 2, although osseointegrated and in function, did not fulfill success criteria: Cumulative implants' success rates were 93.2% in Group 1 and 95.6% in Group 2. The mean marginal bone losses during the first year in Group 1 and Group 2 were 0.69 and 0.43 mm, respectively, followed by an annual loss of ~ 0.06 and 0.07 mm, respectively, in the following years. No clinical parameter was abnormal. Twenty-two (10.4%) implants were exposed to peri-implant mucositis, whereas 19 (11.0%) implant-supported restorations were involved in prosthetic complications. CONCLUSIONS: The preliminary results of this retrospective study indicate that ridge expansion alone or in combination with GBR can be considered an effective and safe procedure for treatment of width insufficiency of alveolar ridges on the purpose of implant application.

Polymer optical fiber twisted macro-bend coupling system for liquid level detection.

The liquid level detection principle of cladding mode frustrated total internal reflection (CMFTIR) effect is proposed. The significant enhancement of CMFTIR effect is realized through macro-bend coupling system in which the dark-field coupling phenomenon between two multimode polymer optic fibers is observed through experiment. Especially twisted macro-bend coupling structure (TMBCS) is adopted to achieve stable coupling of two naked POF. The testing result showed that the dark-filed forward coupling efficiency reached 2‰ and the extinction ratio of the liquid level probe reached 4.18 dB. Compared with existing optical fiber liquid level sensors, the TMBCS probe is simpler, robuster, and cheaper. In addition, the TMBCS has the potential for displacement or stress sensing.

[Galectin-3 expression in peripheral blood mononuclear cells of chronic hepatitis B patients treated with pegylated interferon alpha-2a].

OBJECTIVE: To study the relationship between therapeutic efficacy of pegylated interferon alpha-2a (Peg-IFNa-2a) in patients with chronic hepatitis B (CHB) and expression of Galectin-3 in peripheral blood mononuclear cells (PBMCs). METHODS: Fifty CHB patients treated with a 48-week course of Peg-IFNa-2a (180 mug/week, subcutaneous) were divided into groups according to treatment response, with 14 patients in the 24-week responder group, 21 patients in the 48-week responder group and 15 patients in the non-responder groups. Twenty healthy volunteers served as the normal control group. Gene and protein expression of Galectin-3 in PBMCs was detected by PCR and westen blotting. RESULTS: PBMC expression of Galectin-3 was significantly higher in the effective treatment (responders) group compared to the control group and the non-responder group. In addition, the 24-week responders had significantly higher than the 48-week responders, and the 48-week responders had significantly higher Galectin-3 expression than the non-responders at 24 weeks. CONCLUSION: Peg-IFNa-2a may inhibit HBV DNA replication by up-regulating the expression of Galectin-3 in PBMCs.

Description of two new species of the genus Megophrys (Amphibia: Anura: Megophryidae) from Heishiding Nature Reserve, Fengkai, Guangdong, China, based on molecular and morphological data.

Two new species, Megophrys acuta sp. nov. and Megophrys obesa sp. nov., are described based on a series of specimens collected from Heishiding Nature Reserve, Fengkai County, Guangdong Province, China. They can be distinguished from other known congeners occurred in southern and eastern China by morphological characters and molecular divergence in the mitochondrial 16S rRNA gene. M. acuta is characterized by small and slender body with adult females measuring 28.1-33.6 mm and adult males measuring 27.1-33.0 mm in snout-vent length; snout pointed, strongly protruding well beyond margin of lower jaw; canthus rostralis well developed and sharp; hindlimbs short, the heels not meeting, tibio-tarsal articulation reaching forward the pupil of eye. M. obesa is characterized by stout and slightly small body with adult females measuring 37.5-41.2 mm, adult male measuring 35.6 mm in snout-vent length; snout round in dorsal view; canthus rostralis developed; hindlimbs short, the heels not meeting, tibio-tarsal articulation reaching forward the posterior margin of eye. The discovery of these two new species further confirms that the diversity of this genus has been significantly underestimated. At present the genus Megophrys contains 56 species of which 35 species are distributed in China.

Thermal treatment of alkali lignin to eliminate its inhibition of pancreatic proteases in vitro.

This study aims to investigate how alkali lignin inhibits protein digestion and explore thermal treatment as a potential solution. Solid alkali lignin species pre-heated at different temperatures (150, 200, and 250 °C) and soluble acid-differentiated fractions are subjected to in vitro protein digestion. A range of techniques, including Thermogravimetric Analysis (TGA), Size-Exclusion Chromatography (SEC), Zeta Potential Analyzer, 1H NMR, Isothermal Titration Calorimetry (ITC), and Molecular Docking, were used to investigate the inhibitory mechanism of alkali lignin on pancreatic proteases hydrolysis. Our results suggest that soluble alkali lignin inhibits pancreatic trypsin and chymotrypsin, with the acid-differentiated soluble fraction (LgpH<1) displaying the strongest inhibition and proteases' binding affinity due to the abundance of polar groups (e.g., -OH, -CHO), which facilitate hydrogen-bond formation. Furthermore, pre-heating lignin (200 °C) was confirmed effective for removing LgpH<1 and its negative nutritional influence, providing a feasible strategy for overcoming the negative impact of alkali lignin on protein digestion.

From macro- to nano- scales: Effect of fibrillary celluloses from okara on performance of edible starch film.

Starch/cellulose composite is one of the most promising systems since both matrix and reinforce agent have same chemical unite glucose, which results in an excellent compatibility. In this work, edible starch film was developed by compositing starch with diverse fibrillary celluloses (FCs) derived from okara, employing a confluence of chemical interactions and mechanical influences. Since diameter of the FCs can be easily controlled by processing methodologies, it is the first time to systematically investigate the effect of diameter of the FCs from macro to nano-scales on the performances of starch-based film. The fabricated macro- and nano-fibrillar celluloses and reinforced starch films were characterized by scanning electron microscope, optical microscopy, Fourier transform infrared spectroscopy, Rheometer and contact angle. Results showed that the FCs increased modulus (about 170 %) and tensile strength (about 180 %) significantly as expected since they are well-compatible and some chemical interactions. It was found that nano-fibrillary celluloses (CNFs) improve the toughness (about 20 %) of the starch film more efficiently, which improved the well-recognized weakness of starch-based materials. The nano-scale roughness on the surface of the starch film caused by different shrinkage ratios between starch and CNFs during drying reduced water sensitivity, which is another well-recognized weakness of starch film.

Gut microorganisms of Locusta migratoria in various life stages and its possible influence on cellulose digestibility.

Locusta migratoria is an important phytophagous pest, and its gut microbial communities play an important role in cellulose degradation. In this study, the gut microbial and cellulose digestibility dynamics of Locusta migratoria were jointly analyzed using high-throughput sequencing and anthrone colorimetry. The results showed that the gut microbial diversity and cellulose digestibility across life stages were dynamically changing. The species richness of gut bacteria was significantly higher in eggs than in larvae and imago, the species richness and cellulose digestibility of gut bacteria were significantly higher in early larvae (first and second instars) than in late larvae (third to fifth instars), and the diversity of gut bacteria and cellulose digestibility were significantly higher in imago than in late larvae. There is a correlation between the dynamics of gut bacterial communities and cellulose digestibility. Enterobacter, Lactococcus, and Pseudomonas are the most abundant genera throughout all life stages. Six strains of highly efficient cellulolytic bacteria were screened, which were dominant gut bacteria. Carboxymethyl cellulase activity (CMCA) and filter paper activity (FPA) experiments revealed that Pseudomonas had the highest cellulase enzyme activity. This study provides a new way for the screening of cellulolytic bacteria and lays the foundation for developing insects with significant biomass into cellulose-degrading bioreactors. IMPORTANCE: Cellulose is the most abundant and cheapest renewable resource in nature, but its degradation is difficult, so finding efficient cellulose degradation methods is an urgent challenge. Locusta migratoria is a large group of agricultural pests, and the large number of microorganisms that inhabit their intestinal tracts play an important role in cellulose degradation. We analyzed the dynamics of Locusta migratoria gut microbial communities and cellulose digestibility using a combination of high-throughput sequencing technology and anthrone colorimetry. The results revealed that the gut microbial diversity and cellulose digestibility were dynamically changed at different life stages. In addition, we explored the intestinal bacterial community of Locusta migratoria across life stages and its correlation with cellulose digestibility. The dominant bacterial genera at different life stages of Locusta migratoria were uncovered and their carboxymethyl cellulase activity (CMCA) and filter paper activity (FPA) were determined. This study provides a new avenue for screening cellulolytic bacteria and lays the foundation for developing insects with significant biomass into cellulose-degrading bioreactors.

Incidence and prognosis of olfactory and gustatory dysfunctions related to SARS-CoV-2 Omicron strain infection in China: A national multicenter survey of 35,566 individuals.

Objective: This cross-sectional study aimed to determine the epidemiology of olfactory and gustatory dysfunctions related to COVID-19 in China. Methods: This study was conducted by 45 tertiary Grade-A hospitals in China. Online and offline questionnaire data were obtained from patients infected with COVID-19 between December 28, 2022, and February 21, 2023. The collected information included basic demographics, medical history, smoking and drinking history, vaccination history, changes in olfactory and gustatory functions before and after infection, and other postinfection symptoms, as well as the duration and improvement status of olfactory and gustatory disorders. Results: Complete questionnaires were obtained from 35,566 subjects. The overall incidence of olfactory and taste dysfunction was 67.75%. Being female or being a cigarette smoker increased the likelihood of developing olfactory and taste dysfunction. Having received four doses of the vaccine or having good oral health or being a alcohol drinker decreased the risk of such dysfunction. Before infection, the average olfactory and taste VAS scores were 8.41 and 8.51, respectively; after infection, they decreased to 3.69 and 4.29 and recovered to 5.83 and 6.55 by the time of the survey. The median duration of dysosmia and dysgeusia was 15 and 12 days, respectively, with 0.5% of patients having symptoms lasting for more than 28 days. The overall self-reported improvement rate was 59.16%. Recovery was higher in males, never smokers, those who received two or three vaccine doses, and those that had never experienced dental health issues, or chronic accompanying symptoms. Conclusions: The incidence of dysosmia and dysgeusia following infection with the SARS-CoV-2 virus is high in China. Incidence and prognosis are influenced by several factors, including sex, SARS-CoV-2 vaccination, history of head-facial trauma, nasal and oral health status, smoking and drinking history, and the persistence of accompanying symptoms.

Injectable thermosensitive chitosan/ß-glycerophosphate/collagen hydrogel maintains the plasticity of skeletal muscle satellite cells and supports their in vivo viability.

A cell carrier plays an important role in the maintenance, growth and engraftment of specific cells aimed for defined therapeutic uses in many tissue engineering strategies. A suitable microenvironment for the cells allows for the maximum efficacy of the hybrid device. We have prepared an injectable thermosensitive chitosan/ß-glycerophosphate/collagen (C/GP/Co) gel and investigated its potential application as a support for the culture of skeletal muscle satellite cells (SMSCs). A cell viability assay was used to evaluate the in vitro cytocompatibility of the gel. Cell growth was assessed by scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and histological analysis. The influence of the C/GP/Co gel on the plasticity of SMSCs seeded at the surface of the gel was assessed by induction of the myogenic, osteogenic and adipogenic differentiation. C/GP/Co gel provided the appropriate environment for the culture of SMSCs in vitro. In addition, the C/GP/Co gel supported SMSC plasticity. In vivo testing of the SMSC-seeded gel was investigated by subcutaneous injection into the dorsum of nude mice. Cell viability was assessed both by in vivo imaging and histological examination of the explants. In conclusion, C/GP/Co hydrogel is a cytocompatible carrier for the in vivo delivery of SMSCs and supportive for SMSC plasticity. Thus, this gel has potential applications in tissue engineering and regenerative medicine.