Protective effects of sodium butyrate on fluorosis in rats by regulating bone homeostasis and serum metabolism.

Fluorosis due to high fluoride levels in drinking water profoundly affects the development of human skeletal and dental structures. Sodium butyrate (NaB) has been found to regulate overall bone mass and prevent pathological bone loss. However, the mechanism of NaB action on fluorosis remains unclear. In this study, a rat model of fluorosis induced by 100 mg/L sodium fluoride was used to investigate the impact of NaB on bone homeostasis and serum metabolomics. It was found that NaB significantly reduced the levels of bone resorption markers CTX-Ⅰ and TRACP-5B in fluorosis rats. Moreover, NaB increased calcium and magnesium levels in bone, while decreasing phosphorus levels. In addition, NaB improved various bone microstructure parameters, including bone mineral density (BMD), trabecular thickness (Tb. Th), trabecular bone separation (Tb. SP), and structural model index (SMI) in the femur. Notably, NaB intervention also enhanced the antioxidant capacity of plasma in fluorosis rats. Furthermore, a comprehensive analysis of serum metabolomics by LC-MS revealed a significant reversal trend of seven biomarkers after the intervention of NaB. Finally, pathway enrichment analysis based on differential metabolites indicated that NaB exerted protective effects on fluorosis by modulating arginine and proline metabolic pathways. These findings suggest that NaB has a beneficial effect on fluorosis and can regulate bone homeostasis by ameliorating metabolic disorders.

First report of Diaporthe tulliensis causing leaf spot on Millettia speciosa in China.

Millettia speciosa Champ, renowned for its diverse applications in traditional medicine, is extensively cultivated in the Guangxi region of China, spanning roughly 5,973 hectares. In July 2021, a plantation in Yulin, Guangxi, China (22°64'N; 110°29'E), exhibited severe leaf spot disease on M. speciosa. Notably, a 46,690 square meters area had over 40% leaf spot incidence. Initially, symptoms appeared as small, circular, pale-yellow lesions on the leaves, then turned into irregular, dark brown spots with yellow halos, leading to the wilt and defoliation of leaves. To identify the responsible pathogen, a total of five symptomatic leaves were collected and sterilized systematically. Small tissue segments (5×5 mm) from lesion peripheries were aseptically excised, then surface sterilized with 75% ethanol for 10 s, and 1% sodium hypochlorite (NaClO) for 3 min. Following this, the sterilized tissues were triple-rinsed with sterile water and cultured on potato dextrose agar (PDA) at 28 °C in the dark for 7 d. A total of seven isolates were obtained through single-spore isolation, and one representative isolate, N2-3, was selected for further analysis. After 7 d of incubation, colonies displayed flat, white, and extensively branched aerial hyphae. Over time, the reverse side of the colony changed from white to yellowish-white. The pycnidia were black with conidial droplets ranging from cream to pale yellow exuding from their ostioles. The α-conidia were one-celled, hyaline, ovoid to cylindrical, typically with one or two droplets, 2.6 to 5.9 ×1.4 to 3.9 µm (n=50). These morphological traits align with those of the genus Diaporthe, as reported by Li et al. (2022) and Crous et al. (2015). To identify the species, isolate N2-3 underwent sequencing of the internal transcribed spacer (ITS), ß-tubulin (BT), and translation elongation factor 1 alpha (EF1-α) sections (Huang et al. 2021). Obtained sequences of ITS, BT and EF1-α (Genebank accessions nos. OR600532, OR662169 and OR662168) displayed a 99% similarity to Diaporthe tulliensis (Genebank accessions nos. OP219651, ON932382, OL412437, respectively). Based on the concatenated ITS, BT and EF1-α, a neighbor-joining phylogenetic analyses using MEGA7.0 clustered with D. tulliensis. Therefore, the fungus was identified as D. tulliensis (teleomorph name) based on morphological and molecular features. A pathogenicity test was conducted on 1-year-old M. speciosa seedlings by gently abrading healthy leaves with sterilized toothpicks to create superficial wounds. Wounded leaves were then inoculated with 5 mm diameter mycelial plugs, while control seedlings received PDA plugs. Three leaves per plant and five plants per treatment were selected for assessment. All seedlings were kept in a controlled greenhouse (12/12h light/dark, 25 ± 2 °C, 90% humidity). After 7 d, the inoculated leaves showed symptoms like those in the field, while control plants remained healthy. The fungus was consistently reisolated from the infected leaves, satisfying Koch's postulates. Notably, D. tulliensis has caused Boston ivy leaf spot, bodhi tree leaf spot, cacao pod rot, and jasmine stem canker (Huang et al. 2021; Li et al. 2022; Serrato-Diaz et al. 2022; Hsu et al. 2023). This discovery is significant as it marks the first report of Diaporthe tulliensis causing leaf spot on Millettia speciossa in China, which has direct implications for the development of diagnostic tools and research into potential disease management strategies.

Antifouling Surfaces Enabled by Surface Grafting of Highly Hydrophilic Sulfoxide Polymer Brushes.

Antifouling surfaces are important in a broad range of applications. An effective approach to antifouling surfaces is to covalently attach antifouling polymer brushes. This work reports the synthesis of a new class of antifouling polymer brushes based on highly hydrophilic sulfoxide polymers by surface-initiated photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The sulfoxide polymer brushes are able to effectively reduce nonspecific adsorption of proteins and cells, demonstrating remarkable antifouling properties. Given the outstanding antifouling behavior of the sulfoxide polymers and versatility of surface-initiated PET-RAFT technology, this work presents a useful and general approach to engineering various material surfaces with antifouling properties, for potential biomedical applications in areas such as tissue engineering, medical implants, and regenerative medicine.

Quantitative Segmentation Analysis of the Radiological Changes by Using ITK-SNAP: Risk Assessment of the Severity and Recurrence of Medication-related Osteonecrosis of the Jaw.

Background and purpose: Medication-related osteonecrosis of the jaw (MRONJ) severely impairs patients' quality of life and is remarkably refractory to treatment. There are lots of studies about identification of the radiographic features of MRONJ, yet reports about quantitative radiographic analysis for the risk assessment of the severity and recurrence of MRONJ are rarely heard. The aim of this study was to investigate the volumes of osteolytic lesions and radiodensity values of osteosclerotic lesions in MRONJ patients by using ITK-SNAP for severity prediction and prognosis evaluation. Materials and methods: Of 78 MRONJ patients (78 lesions) involved in this retrospective study, 53 were presented as osteolytic lesions and 25 were presented as osteosclerotic changes alone. Comprehensive CBCT images, demographics and clinical data of patients were investigated. The volumetric analysis and radiodensity measurement were performed by ITK-SNAP. SPSS 25.0 were used for statistical analysis. Results: The osteolytic lesion volumes in MRONJ patients receiving intravenous bisphosphonates (P=0.004) and patients without osteoporosis (P=0.027) were significantly large. No significant correlation between the volumes and bisphosphonates duration was found (P=0.094). The radiodensity values of osteosclerotic lesions was significantly correlated with bisphosphonates duration (P=0.040). The surrounding area of post-surgical lesions in MRONJ patients with recurrence showed significantly great radiodensity values (P=0.025). No significant correlation between the radiodensity values and the transformation from osteosclerotic lesions to osteolytic lesions was observed (P=0.507). Conclusion: MRONJ patients receiving intravenous bisphosphonates develop into large volumes of osteolytic lesions more easily. Long-term bisphosphonates duration is possibly related with higher bone density of osteosclerotic lesions, while higher density is not associated with the transformation from osteosclerotic lesions to osteolytic lesions. A rise of bone mineral density nearby post-surgical lesions is probably a predictor for MRONJ recurrence.

Low-Fouling Fluoropolymers for Bioconjugation and In†Vivo Tracking.

The conjugation of hydrophilic low-fouling polymers to therapeutic molecules and particles is an effective approach to improving their aqueous stability, solubility, and pharmacokinetics. Recent concerns over the immunogenicity of poly(ethylene glycol) has highlighted the importance of identifying alternative low fouling polymers. Now, a new class of synthetic water-soluble homo-fluoropolymers are reported with a sulfoxide side-chain structure. The incorporation of fluorine enables direct imaging of the homopolymer by 19 F MRI, negating the need for additional synthetic steps to attach an imaging moiety. These self-reporting fluoropolymers show outstanding imaging sensitivity and remarkable hydrophilicity, and as such are a new class of low-fouling polymer for bioconjugation and in vivo tracking.

[Remodeling of the articular cartilage during the replacement of its defect by a biocomposite material].

The regenerative capacity of articular cartilage was studied in animals in which its defects were replaced by biocomposite materials based on polycaprolactone in combination with hydroxyapatite. Six specimens of the material were used, which consisted of different proportions of these polymers. In the experiment on sheep (n = 6) it was found that these biocomposite materials were replaced by hyaline-like cartilage during healing of artificially created defects in the articular cartilage of the knee joint, while the ratio of composite components had no effect on the quality of the regenerates formed. These results support the view of a possible application of biocomposite materials in the treatment of degenerative and traumatic lesions of hyaline cartilage.

[Treatment of stage â ¡-â ¢ Kümmell disease with robot-assisted bone cement-augmented pedicle screw fixation].

OBJECTIVE: To evaluate the early clinical efficacy of robot-assisted percutaneous short-segment bone cement-augmented pedicle screw fixation in the treatment of stageⅡ-Ⅲ Kümmell disease. METHODS: The clinical data of 20 patients with stageⅡ-Ⅲ Kümmell's disease who underwent robot-assisted percutaneous bone cement-augmented pedicle screw fixation between June 2017 and January 2021 were retrospectively analyzed. There were 4 males and 16 females, aged from 60 to 81 years old with an average age of (69.1±8.3) years. There were 9 cases of stageⅡand 11 cases of stage Ⅲ, all of which were single vertebral lesions, including 3 cases of T11, 5 cases of T12, 8 cases of L1, 3 cases of L2, and 1 case of L3. These patients did not exhibit symptoms of spinal cord injury. The operation time, intraoperative blood loss, and complications were recorded. The position of pedicle screws and the filling and leakage of bone cement in gaps were observed using postoperative CT 2D reconstruction. The data of the visual analogue scale (VAS), Oswestry disability index (ODI), kyphosis Cobb angle, wedge angle of the diseased vertebra, and anterior and posterior vertebral height on lateral radiographs were statistically analyzed preoperatively, 1 week postoperatively, and at the final follow-up. RESULTS: Twenty patients were followed up for 10 to 26 months, with an average follow-up of (16.0±5.1) months. All operations were successfully completed. The surgical duration ranged from 98 to 160 minutes, with an average of (122±24) minutes. The intraoperative blood loss ranged from 25 to 95 ml, with an average of (45±20) ml. There were no intraoperative vascular nerve injuries. A total of 120 screws were inserted in this group, including 111 screws at grade A and 9 screws at grade B according to the Gertzbein and Robbins scales. Postoperative CT indicated that the bone cement was well-filled in the diseased vertebra, and cement leakage occurred in 4 cases. Preoperative VAS and ODI were (6.05±0.18) points and (71.10±5.37)%, respectively, (2.05±0.14) points and (18.57±2.77)% at 1 week after operation, and (1.35±0.11) points and (15.71±2.12) % at final follow-up. There were significant differences between postoperative 1 week and preoperative, and between final follow-up and postoperative 1 week(P<0.01). Anterior and posterior vertebral height, kyphosis Cobb angle, and wedge angle of the diseased vertebra were(45.07±1.06)%, (82.02±2.11)%, (19.49±0.77) °, and (17.56±0.94) ° preoperatively, respectively, (77.00±0.99)%, (83.04±2.02)%, (7.34±0.56) °, and (6.15±0.52) ° at 1 week postoperatively, and (75.13±0.86)%, (82.39±0.45)%, (8.38±0.63) °, and (7.09±0.59) ° at the final follow-up. CONCLUSION: Robot-assisted percutaneous short-segment bone cement-augmented pedicle screw fixation demonstrates satisfactory short-term efficacy in treating stageⅡ-Ⅲ Kümmell's disease as an effective minimally invasive alternative. However, longer operation times and strict patient selection criteria are necessary, and long-term follow-up is required to determine its lasting effectiveness.

Fluoropolymer-MOF Hybrids with Switchable Hydrophilicity for 19F MRI-Monitored Cancer Therapy.

Cancer theranostics that combines cancer diagnosis and therapy is a promising approach for personalized cancer treatment. However, current theranostic strategies suffer from low imaging sensitivity for visualization and an inability to target the diseased tissue site with high specificity, thus hindering their translation to the clinic. In this study, we have developed a tumor microenvironment-responsive hybrid theranostic agent by grafting water-soluble, low-fouling fluoropolymers to pH-responsive zeolitic imidazolate framework-8 (ZIF-8) nanoparticles by surface-initiated RAFT polymerization. The conjugation of the fluoropolymers to ZIF-8 nanoparticles not only allows sensitive in vivo visualization of the nanoparticles by 19F MRI but also significantly prolongs their circulation time in the bloodstream, resulting in improved delivery efficiency to tumor tissue. The ZIF-8-fluoropolymer nanoparticles can respond to the acidic tumor microenvironment, leading to progressive degradation of the nanoparticles and release of zinc ions as well as encapsulated anticancer drugs. The zinc ions released from the ZIF-8 can further coordinate to the fluoropolymers to switch the hydrophilicity and reverse the surface charge of the nanoparticles. This transition in hydrophilicity and surface charge of the polymeric coating can reduce the "stealth-like" nature of the agent and enhance specific uptake by cancer cells. Hence, these hybrid nanoparticles represent intelligent theranostics with highly sensitive imaging capability, significantly prolonged blood circulation time, greatly improved accumulation within the tumor tissue, and enhanced anticancer therapeutic efficiency.

[Pharmacodynamics of compound danshen pH-dependent delayed release pellets in dogs].

AIM: To prepare the compound danshen pH-dependent delayed release pellets and filled them in capsules and then study thier pharmacodynamics. METHODS: The pH-dependent delayed release pellets were prepared by coating with HPMC, Eudragit L-30D-55 and Eudragit L100-Eudragit S100 (1:6), separately, and mixed in proper proportion to prepare the two pH-dependent delayed release systems T1 and T2. The release of delayed release pellets was determined according to the method of China Pharmacopoeia (2000) in the simulated gastrointestinal pH conditions. The pharmacodynamic,parameters were evaluated by serum pharmacology method. RESULTS: The compound danshen pH-dependent delayed release pellets were prepared with the characteristics of pH dependent delayed release profile in vitro. In single oral dose, the pharmacodynamic parameters of rapid release tablets R Emax (%) and Tmax (h) were 34.63% and 0.58 h, respectively. Tmax S of delayed-release pellets T1 and T2 were extended to 2.42, 3.17 h and Emax S (%) were declined to 13.57%, 14.52%. The relative bioavailabilities of T1 and T2 were 99.3%, 133.6% , respectively. In multiple oral doses of R the pharmacodynamic parameter of DF was 7.32 and those T1, T2 DF were 3.40, 3.03, respectively. CONCLUSION: The compound danshen pH-dependent delayed release capsules have characteristics of pH dependent releasing in vitro and characteristics of delayed release in vivo. In multiple oral (loses the DF of delayed release capsules was lower than that of rapid release tablet at steady state.

[Preliminary study of bonding strength between diatomite-based dental ceramic and veneering porcelains].

PURPOSE: In order to choose the best veneering porcelain for diatomite-based dental ceramic substrate, the bonding strength between diatomite-based dental ceramics and veneering porcelains was measured, and the microstructure and elements distribution of interface were analyzed. METHODS: The coefficient of thermal expansion (CTE) of diatomite-based dental ceramics was detected by dilatometry. Three veneering porcelain materials were selected with the best CTE matching including alumina veneering porcelain (group A), titanium porcelain veneering porcelain (group B), and E-max veneering porcelain (group C). Shear bonding strength was detected. SEM and EDS were used to observe the interface microstructure and element distribution. Statistical analysis was performed using SPSS 17.0 software package. RESULTS: The CTE of diatomite-based dental ceramics at 25-500 degrees centigrade was 8.85×10-6K-1. The diatomite-based substrate ceramics combined best with group C. Shear bonding strength between group A and C and group B and C both showed significant differences(P<0.05). SEM and EDS showed that the interface of group C sintered tightly and elements permeated on both sides of the interface. CONCLUSIONS: The diatomite-based substrate ceramics combines better with E-max porcelain veneer.

Facile synthesis of size controllable dendritic mesoporous silica nanoparticles.

The synthesis of highly uniform mesoporous silica nanospheres (MSNs) with dendritic pore channels, particularly ones with particle sizes below 200 nm, is extremely difficult and remains a grand challenge. By a combined synthetic strategy using imidazolium ionic liquids (ILs) with different alkyl lengths as cosurfactants and Pluronic F127 nonionic surfactants as inhibitors of particle growth, the preparation of dendritic MSNs with controlled diameter between 40 and 300 nm was successfully realized. An investigation of dendritic MSNs using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and nitrogen physisorption revealed that the synthesis of dendritic MSNs at larger size (100-300 nm) strongly depends on the alkyl lengths of cationic imidazolium ILs; while the average size of dendritic MSNs can be controlled within the range of 40-100 nm by varying the amount of Pluronic F127. The Au@MSNs can be used as a catalyst for the reduction of 4-nitrophenol by NaBH4 into 4-aminophenol and exhibit excellent catalytic performance. The present discovery of the extended synthesis conditions offers reproducible, facile, and large-scale synthesis of the monodisperse spherical MSNs with precise size control and, thus, has vast prospects for future applications of ultrafine mesostructured nanoparticle materials in catalysis and biomedicine.

Insulin is a kinetic but not a thermodynamic inhibitor of amylin aggregation.

One of the most important pathological features of type 2 diabetes is the formation of islet amyloid, of which the major component is amylin peptide. However, the presence of a natural inhibitor such as insulin may keep amylin stable and physiologically functional in healthy individuals. Some previous studies demonstrated that insulin was a potent inhibitor of amylin fibril formation in vitro, but others obtained contradictory results. Hence, it is necessary to elucidate the effects of insulin on amylin aggregation. Here we report that insulin is a kinetic inhibitor of amylin aggregation, only keeping its inhibitory effect for a limited time period. Actually, insulin promotes amylin aggregation after long-term incubation. Furthermore, we found that this promotional effect could be attributed to the copolymerization of insulin and amylin. We also found that insulin copolymerized with amylin monomer or oligomer rather than preformed amylin fibrils. These results suggest that the interaction between insulin and amylin may contribute not only to the inhibition of amylin aggregation but also to the coaggregation of both peptides in type 2 diabetes.