Coordinate-based data analysis of the accuracy of five intraoral scanners for scanning completely dentate and partially edentulous mandibular arches.

STATEMENT OF PROBLEM: Current methods for assessing the accuracy of intraoral scanners (IOSs) that reduce errors and provide comprehensive data compared with previous methods are lacking. PURPOSE: The purpose of this in vitro study was to present a coordinate-based data analysis method to compare the accuracy of 5 IOSs for scanning completely dentate and partially edentulous casts. MATERIAL AND METHODS: Reference scans of 2 complete arch casts (completely and partially dentate) were digitized using a high-precision laboratory scanner (Ceramill Map 600). Each cast was scanned 10 times each using 5 IOSs (3Shape TRIOS 3, Planmeca Emerald, iTero Element 5D, Medit i500, and Shining Aoralscan 3). The dataset of all 10 test groups was analyzed by using a reverse engineering software program (Geomagic Wrap). Each test cast was aligned with the reference cast by 3-dimensional (3D) superimposition to determine the translation and rotation along the x-, y-, and z-axes. The dataset was analyzed using the Kruskal-Wallis and post hoc Bonferroni tests (α=.05). RESULTS: Significant differences were observed in all parameters among all scanners when scanning the same cast (P<.05). Significant differences were observed in at least 1 parameter for all scanners, except Element 5D after scanning different casts using the same scanner. Deviations in the test data generally relocated toward the mesial, buccal, and apical sides, and the casts were almost always rotated clockwise around the y-axis and counterclockwise around the z-axis. For the completely dentate cast, among all IOSs, Element 5D demonstrated the highest accuracy in most of the measured parameters, specifically in the y-axis translation (0.06[0.07] mm), z-axis translation (0.08[0.05] mm), and y-axis rotation (0.21[0.16] degree) (P<.05). For the partially edentulous cast, Element 5D displayed higher accuracy in most of the measured parameters, including the x-axis translation (0.11[0.14] mm) and z-axis rotation (0.12[0.18] degree) (P<.05). Emerald also displayed higher accuracy in most of the measured parameters, including the y-axis translation (0.05[0.08] mm) and y-axis rotation (0.14[0.12] degree) (P<.05). Element 5D exhibited no difference in the scanning accuracy between the 2 types of casts (P>.05). CONCLUSIONS: Element 5D offered a high level of accuracy and was an appropriate scanner for both situations. The method presented in this study provides a good assessment of accuracy deviations in complete arch scans using 3D coordinate-based data analysis.

Combining antibiotic-loaded bone cement-based free vastus lateralis muscle-sparing flap with split-thickness skin grafts: A reliable strategy for reconstructing diabetic foot ulcers at non-weight-bearing areas.

Diabetic foot ulcers (DFUs) present significant challenges due to their associated amputation rates, mortality, treatment complexity and excessive costs. Our earlier work introduced a wound surgical integrated treatment (WSIT) for DFUs, yielding promising outcomes. This study focuses on a specific WSIT protocol employing antibiotic-loaded bone cement (ALBC) in the first Stage, and free vastus lateralis muscle-sparing (VLMS) flaps and split-thickness skin grafts (STSGs) in the second stage to repair non-weight-bearing DFUs. From July 2021 to July 2023, seven DFU patients (aged 47-71 years) underwent this treatment. Demographic data, hospital stay and repair surgery times were collected. Histological and immunohistochemical analyses assessed angiogenesis, collagen deposition and inflammation. SF-36 questionnaire measured pre- and postoperative quality of life. Preoperative ultrasound Doppler showed that the peak blood flow velocity of the recipient area artery was significantly >30 cm/s (38.6 ± 6.8 cm/s) in all patients. Muscle flap sizes varied from 8 × 3.5 × 1 to 18 × 6 × 2 cm. The operation time of the repair surgery was 156.9 ± 15.08 minutes, and the hospital stay was 18.9 ± 3.3 days. Histological analysis proved that covering DFUs with ALBC induced membrane formation and increased collagen, neovascularization and M2 macrophages fraction while reducing M1 macrophages one. All grafts survived without amputation during a 7- to 24-month follow-up, during which SF-36 scores significantly improved. A combination of ALBC with free VLMS flaps and STSGs proved to be safe and effective for reconstructing non-weight-bearing DFUs. It rapidly controlled infection, enhanced life quality and foot function, and reduced hospitalization time. We advocate integrating this strategy into DFU treatment plans.

Aptamer-based self-assembled nanomicelle enables efficient and targeted drug delivery.

Nucleic acid aptamer-based nanomicelles have great potential for nanomedicine and nanotechnology applications. However, amphiphilic aptamer micelles are known to be inherently unstable upon interaction with cell membranes in the physiological environment, thus potentially compromising their specific targeting against cancer cells. This flaw is addressed in the present work which reports a superstable micellar nanodelivery system as an amphiphilic copolymer self-assembled micelle composed of nucleic acid aptamer and polyvalent hydrophobic poly(maleic anhydride-alt-1-octadecene) (C18PMH). Using Ce6 as a drug model, these C18-aptamer micelles exhibit efficient tumor-targeting and -binding ability, facilitating the entry of Ce6 into targeted cells for photodynamic therapy. In addition, they can be loaded with other hydrophobic drugs and still demonstrate favorable therapeutic effects. As such, these C18-aptamer micelles can serve as a universal platform for loading multiple drugs, providing a safer and more effective solution for treating cancer.

Dysbiosis of saliva microbiome in patients with oral lichen planus.

BACKGROUND: Oral microbiota is not only important for maintaining oral health but also plays a role in various oral diseases. However, studies regarding microbiome changes in oral lichen planus (OLP) are very limited. To the best of our knowledge, there has been only two studies investigating salivary microbiome changes in OLP. Therefore, the purpose of this study was to identify the characteristic microbial profile in the saliva of OLP patients, with or without erosive lesions, and compare that with recurrent aphthous ulcer (RAU), a common oral immunological disorder that also shows multiple erosive/ulcerative lesions. Whole saliva samples were collected from 20 patients with OLP (erosive E, n = 10 and non-erosive NE, n = 10), 10 patients with RAU (U) and 10 healthy controls (C). DNA was extracted from the saliva samples, and the 16S rDNA gene V4 hypervariable region was analyzed using Illumina sequencing. RESULTS: We obtained 4949 operational taxonomic units (OTUs) from the V4 region in all saliva samples. Community composition analysis showed a clear decreased relative abundance of genera Streptococcus and Sphingomonas in saliva from RAU patients when compared to the other three groups. Relative abundance of Lautropia and Gemella were higher in E group, whereas relative abundance of Haemophilus and Neisseria were higher in NE group when compared to C group. Abiotrophia and Oribacterium were higher in OLP (combining E and NE groups), while Eikenella and Aggregatibacter were lower when compared to C group. There was statistically significance in α-diversity between E and RAU groups(p < 0.05). Significant differences in ß-diversity were detected in bacteria between E and C; NE and C; as well as E and NE groups. The LDA effect size algorithm identified the g_Haemophilus might be the potential biomarker in NE group. CONCLUSIONS: We found that salivary microbiome in erosive OLP was significantly different from that found in RAU; and these changes may be related to the underlying disease process rather than presence of ulcerative/erosive lesions clinically. In addition, our findings in bacterial relative abundance in OLP were significantly different from the previously reported findings, which points to the need for further research in salivary microbiome of OLP.

The clinical accuracy of the implant digital surgical guide: A meta-analysis.

PURPOSE: To systematically evaluate the accuracy of clinical applications of digital guides. METHODS: First, PubMed and Embase databases were searched using the PICO standard. Eligible articles were included. Second, the eligible articles were classified according to the different types. Next, the NOS and ROB2 as evaluation indicators were used to evaluate the bias of those included articles. Finally, sensitive factors were excluded through the outcomes and data analyses were retrieved. RESULTS: More than 1,562 articles were retrieved, and 38 in vivo research documents were systematically analyzed after screening according to the inclusion criteria, which mainly listed three aspects of the coronal, apical, and angular implant data, and integrated the same type of articles in the study. To test its heterogeneity, the P-values of those articles included in the analysis were all less than 0.05. Finally, in the comparison between the guide group and the free-hand group after excluding sensitive factors, the standardized mean difference (Std.MD) of the angle was 1.26 (95% CI 1.06, 1.47), the Std.MD of the apical point was 1.38 (95% CI 1.12, 1.63), and the Std.MD of the coronal point was 0.98 (95% CI 0.66, 1.29). Comparing the maxillary and mandibular groups after excluding sensitive factors, the Std.MD of the coronal point was -0.31 (95% CI -0.52, -0.09), the Std.MD of the apical point was -0.15 (95% CI -0.34, 0.03), and the Std.MD of the angle is -0.23 (95% CI -0.46, 0.01). Comparison between the smoking group and the nonsmoking group, and between the flap group and the flapless group showed that there was not enough evidence to make a reliable assessment. CLINICAL SIGNIFICANCE: Compared with free-hand operation, a digital guide is more accurate in the apex, the coronal point and the angle, and the accuracy in the angle was very high. The difference in accuracy between the maxillary and mandibular groups was not statistically significant. Other factors such as smoking habit and flap need more clinical data.

[Paclitaxel liposome for the treatment of castration-resistant prostate cancer].

OBJECTIVE: To investigate the effect and safety of the 3-week paclitaxel liposome protocol in the treatment of castration-resistant prostate cancer (CRPC). METHODS: This retrospective study included 40 cases of CRPC treated by the 3-week paclitaxel liposome protocol from February 2014 to February 2019, which involved intravenous injection of 10 mg dexamethasone in 100 ml normal saline on the first day and that of metoclopramide and panxi tora azole on the second day, followed by about 3 hours of intravenous drip of paclitaxel liposome at 135 mg/m2 for a course of 3 weeks. During the follow-up period, the patients received detection of the serum PSA level before treatment and chest x-ray and whole-body bone scan every six months. After two courses of treatment, the patients were observed for the changes in the serum PSA level, relief of bone pain, quality of survival, overall survival rate, overall survival time and toxic reactions. The protocol was continued unless the patient underwent progression, refused for unacceptable toxicity, or died. RESULTS: The patients were aged 59 to 79 (mean 68.80±5.67) years old, with the serum PSA level of (28.05 ± 3.22) µg/L at the baseline and (4.12 ± 0.23) µg/L after treatment. Thirty-eight of the patients were followed up for 3 to 33 (mean 12.2) months. PSA-based evaluation showed therapeutic effectiveness in 14 cases (35%), stable condition in 21 (52.5 %) and progression in 5 (12.5 %). Of the 18 patients with bone metastasis and pain, 16 (88.9 %) experienced relief of the symptoms and reduced the use of painkillers, with the bone pain scores of 5.20 ± 1.22 vs 2.79 ± 0.57 before and after treatment. By the end of the follow-up, the overall survival rate was 55.0% (22/40) and the median survival time was 17 months (95% CI: 13.4－24.6). During the treatment, no obvious adverse reactions were observed except for anemia in 1 case and hair loss in another. CONCLUSIONS: For the treatment of CRPC in China, the 3-week paclitaxel liposome protocol has the advantages of desirable safety, low toxicity, acceptable drug tolerance and improved quality of survival, but its curative effect needs to be verified with more randomized clinical trials with larger samples and longer follow-ups.

Anti-inflammatory effect of paeoniflorin combined with baicalin in oral inflammatory diseases.

OBJECTIVE: There are challenges in the treatment of chronic inflammatory diseases of oral mucosa. Both paeoniflorin (PF) and baicalin (BAI) exert anti-inflammatory effects, but the mechanism underlying their combined effects is still unclear. Here, we explored the anti-inflammatory function of the PF-BAI combination in the oral inflammatory response. MATERIALS AND METHODS: The CCK-8 assay was used to determine the proliferative capacity of HOKs with PF and BAI. Enzyme-linked immunosorbent (ELISA), Western blotting, reverse transcription polymerase chain reaction, and confocal immunofluorescence were performed to study the anti-inflammatory effects of PF-BAI in LPS-stimulated human oral keratinocytes (HOKs). Immunohistochemistry and ELISA were performed to detect the levels of NF-κB p65, IKKα and IL-6, TNF-α in OLP and healthy tissues. RESULTS: Compared to PF or BAI alone, the combination of PF-BAI at 5 µg/ml downregulated secretion of inflammatory cytokines more effectively (p < .05). Combined PF-BAI decreased NF-κB p65 and IκBα protein phosphorylation, leading to reduce nuclear translocation of NF-κB p65. Higher expression of TNF-α, IL-6, NF-κB p65, and IKKα were observed in OLP than in HC tissues (p < .01). CONCLUSION: The optimal combination concentration of PF and BAI at 5 µg/ml may have a positive effect on the treatment of oral inflammatory diseases, providing a novel therapeutic approach.

Preparation and evaluation of self-assembly Soluplus®-sodium cholate-phospholipid ternary mixed micelles of docetaxel.

Ternary mixed micelles constituted of Soluplus®, sodium cholate, and phospholipid were prepared as nano-delivery system of the anticancer drug, docetaxel. The formulation of docetaxel-loaded ternary mixed micelles (DTX-TMMs) with an optimized composition (Soluplus®/sodium cholate/phospholipid= 3:2:1 by weight) were obtained. The main particle size of DTX-TMMs was 76.36 ± 2.45 nm, polydispersity index (PDI) was 0.138 ± 0.039, and the zeta potential was -8.46 ± 0.55 mv. The encapsulation efficiency was 94.24 ± 4.30% and the drug loading was 1.25%. The critical micelle concentration value was used to assess the ability of carrier materials to form micelles. The results indicated that the addition of Soluplus® to sodium cholate-phospholipid mixed micelles could reduce the critical micelle concentration and improve the stability. In vitro release studies demonstrated that compared with DTX-Injection group, the DTX-TMMs presented a controlled release property of drugs. In vivo pharmacodynamics results suggested that DTX-TMMs had the most effective inhibitory effect on tumor proliferation and had good biosafety. In addition, the relative bioavailability of mixed micelles was increased by 1.36 times compared with the DTX-Injection in vivo pharmacokinetic study indicated that a better therapeutic effect could be achieved. In summary, the ternary mixed micelles prepared in this study are considered to be promising anticancer drug delivery systems.

Controlled-release of fluazinam from biodegradable PLGA-based microspheres.

Pesticides are biological or chemical substances used to manage pests and diseases. Encapsulation of pesticides in biodegradable carriers creates a slow-release system that can improve water dispersibility and prolong residual activity. We prepared two kinds of poly (lactic-co-glycolic acid)(PLGA) nanoparticles (NPs) with polyvinyl alcohol (PVA) and sodium dodecyl sulfate (SDS) surfactants. These were used to encapsulate the fungicide fluazinam (Flu) against Rhizoctonia solani using the Shirasu Porous Glass (SPG) membrane emulsification method. Both nanoparticles had uniform spherical shapes with average diameters of 314.13 nm (SDS) and 612.80 nm (PVA). The slow-release microspheres had excellent sustained-release properties, resistance to UV degradation, storage stability, leaf surface coverage and antifungal efficacy compared to the commercial formulation.

[Three dimensional measurement of craniofacial hard tissues for the Han nationality with normal occlusion in Changsha area].

OBJECTIVE: To explore the influence of gender and age on the measurement of cone beam CT (CBCT) in normal and occluded craniofacial hard tissues for Han nationality in Changsha area.
 Methods: A total of 80 CBCT data of normal and occluded craniofacial hard tissues for Han nationality in Changsha area were collected, including 40 adults [16 males and 24 females, aged (17.57±1.83) years] and 40 children[16 males and 24 females, age (11.50±1.26) years]. Three-dimensional cephalometric measurements were carried out by Dolphion Imaging software, and the influence of gender and age was compared.
 Results: The symmetry of craniofacial hard tissues in male and female in the adults was good (the maximum asymmetric rate R was 6.39% and the minimum asymmetric rate R was 0.08%). There was no significant differencein the anterior palatal width, palatal width, the upper incisor protrusion distance, the lower incisor protrusion distance, hyoid-mandibular plane, basal epiglottis width, and palatal plane airway width between the males and females (all P>0.05); while the remaining indicators were significantly higher in males than those in females (all P<0.05). There was no significant gender difference in angle indicators (all P>0.05). There were significant differences in the posterior height, the maxillary length, the lower incisor protrusion, and the mandibular plane angle between the adults and the children(all P<0.05); but the rest of indicators were not significant difference (all P>0.05).
 Conclusion: The symmetry of craniofacial hard tissues for Han nationality in Changsha area is good. The gender and age affect the line space measurements but not affect the most of the angle measurements.

Prevention of Oral Candidiasis After Free Flap Surgery: Role of 3% Sodium Bicarbonate Saline in Oral Care.

PURPOSE: Relevant reports about oral candidiasis status and prevention measures after free flap surgery for the oral and maxillofacial region are limited. The present study explored oral candidiasis status after free flap surgery and its prevention through a prospective comparative study. PATIENTS AND METHODS: One hundred four patients were randomized to a control group (n = 54) and an experimental group (n = 50). Compared with the control group, the experimental group was provided an additional 3% sodium bicarbonate saline solution for oral care after free flap surgery. The incidence of oral candidiasis was evaluated by objective examination (saliva culture and salivary pH measurement) and subjective evaluation (clinical signs of oral candidiasis) at admission and from postoperative days 1 to 14. RESULTS: The salivary pH values of the 2 groups were lower than the normal salivary pH, and postoperative salivary pH values were always lower than the active range of oral lysozymes in the control group. The salivary pH values of the experimental group were higher than those of the control group from postoperative days 6 to 14 (P < .05). The incidence of oral candidiasis was 13.0% in the control group, which was higher than that in the experimental group (2.0%; P < .05). In addition, advanced age, use of a free flap for the simultaneous repair of intraoral and paraoral defects, and a combination of 2 antibiotic types were risk factors for oral candidiasis. CONCLUSION: Oral candidiasis was common in patients after free flap reconstruction surgery, and the use of 3% sodium bicarbonate saline solution for oral care effectively prevented it.

Preparation and evaluation of posaconazole-loaded enteric microparticles in rats.

OBJECTIVES: Posaconazole (POS) is an antifungal compound which has a low oral bioavailability. The aim of this study was to prepare POS enteric microparticles to enhance its oral bioavailability. METHODS: POS enteric microparticles were prepared with hypromellose acetate succinate (HPMCAS) via the spray drying method. The solvent mixtures of acetone and ethanol used in the preparation of the microparticles were optimized to produce the ideal POS enteric microparticles. Multivariate data analysis using a principal component analysis (PCA) was used to find the relationship among the HPMCAS molecular characteristics, particle properties and drug release kinetics from the spray dried microparticles. KEY FINDINGS: The optimal spray solvent mixtures were critical to produce the POS microparticles with the defined polymer entanglement index, drug surface enrichment, particle size and drug loading. The HPMCAS molecular characteristics affected the microscopic connectivity and diffusivity of polymer matrix and eventually influenced the drug release behavior, and enhanced the bioavailability of POS. CONCLUSIONS: These studies suggested that the selection of suitable solvent mixtures of acetone and ethanol used in the spray drying of the microparticles was quite important to produce the entangled polymer structures with preferred polymer molecular properties of polymer coiling, overlap concentration and entanglement index. Additional studies on particle size and surface drug enrichment eventually produced HPMCAS-based enteric microparticles to enhance the oral bioavailability of POS.

[Preparation and in vitro release evaluation of slow releasing intrauterine silicone rubber bar made of Panax notoginseng and Rubia cordifolia].

To prepare the intrauterine slow release silicone rubber bar made of Panax notoginseng and Rubia cordifolia, and finish its preliminary evaluation of in vitro releasing properties. The open mill method was used for plasticating of silicone rubber. The process parameters of the silicone rubber and drugs mixing were optimized by orthogonal test. The parameters of silicone rubber vulcanization was optimized by single factor test. The preliminary evaluation of in vitro release performance of the silicone rubber bar was conducted with ginsenoside Rg1, ginsenoside Rb1, notoginsenoside R1, purpurin and rubimaillin as the indexes. The results showed that optimum technologic parameters for silicone rubber and drugs mixing：the roller spacing 2 mm; speed ratio 1∶1.2; front roller temperature 55-60 ℃; rear roll temperature 50-55 ℃; and mixing time 20 min. The optimum parameters for silicone rubber vulcanization：temperature 90 ℃, and time 60 min. The studies on release process in vitro revealed that the release process of silicone rubber bar was in line with the Higuchi equations. After 90 days, the cumulative release of ginsenoside Rg1, ginsenoside Rb1 and notoginsenoside R1 was 46.7%, and the cumulative release of purpurin and rubimaillin was 51.9%. The preparation method can be applied to the preparation of silicone rubber bar, with slow release characteristics.

[Development of Silk Fibroin Composite Films for Corneal Repair].

It is important to design a long-period transparent bioactive material for corneal repair in the process of corneal tissue renovation. This article discusses the silk fibroin and formamide blend membranes as a corneal stroma repair material. Silk fibroin solution was mixed with formamide in different proportions to obtain insoluble transparent silk fibroin film by casting method. The blending membranes had excellent mechanical properties, cell compatibility and long-term transparent properties. Rabbit corneal stromal cells were seeded on the sterilized composite films. The rate of cell surface adhesion was over 90% after cells were placed on it for 5 hours. When cells were seeded on blend membranes from one day to seven days, Alma Blue was added to complete medium. Compared with the cell culture plate, there was no significant difference in cell proliferation on formamide/silk films. The results indicated that formamide/silk films might be used as a corneal stroma repair material and worth of further investigatinn

Methane production in microbial reverse-electrodialysis methanogenesis cells (MRMCs) using thermolytic solutions.

The utilization of bioelectrochemical systems for methane production has attracted increasing attention, but producing methane in these systems requires additional voltage to overcome large cathode overpotentials. To eliminate the need for electrical grid energy, we constructed a microbial reverse-electrodialysis methanogenesis cell (MRMC) by placing a reverse electrodialysis (RED) stack between an anode with exoelectrogenic microorganisms and a methanogenic biocathode. In the MRMC, renewable salinity gradient energy was converted to electrical energy, thus providing the added potential needed for methane evolution from the cathode. The feasibility of the MRMC was examined using three different cathode materials (stainless steel mesh coated with platinum, SS/Pt; carbon cloth coated with carbon black, CC/CB; or a plain graphite fiber brush, GFB) and a thermolytic solution (ammonium bicarbonate) in the RED stack. A maximum methane yield of 0.60 ± 0.01 mol-CH4/mol-acetate was obtained using the SS/Pt biocathode, with a Coulombic recovery of 75 ± 2% and energy efficiency of 7.0 ± 0.3%. The CC/CB biocathode MRMC had a lower methane yield of 0.55 ± 0.02 mol-CH4/mol-acetate, which was twice that of the GFB biocathode MRMC. COD removals (89-91%) and Coulombic efficiencies (74-81%) were similar for all cathode materials. Linear sweep voltammetry and electrochemical impedance spectroscopy tests demonstrated that cathodic microorganisms enhanced electron transfer from the cathode compared to abiotic controls. These results show that the MRMC has significant potential for production of nearly pure methane using low-grade waste heat and a source of waste organic matter at the anode.

Bio and nanomaterials based on Fe3O4.

During the past few years, nanoparticles have been used for various applications including, but not limited to, protein immobilization, bioseparation, environmental treatment, biomedical and bioengineering usage, and food analysis. Among all types of nanoparticles, superparamagnetic iron oxide nanoparticles, especially Fe3O4, have attracted a great deal of attention due to their unique magnetic properties and the ability of being easily chemical modified for improved biocompatibility, dispersibility. This review covers recent advances in the fabrication of functional materials based on Fe3O4 nanoparticles together with their possibilities and limitations for application in different fields.

[Comparison on surface ultrastructure characteristic and drought resistance of different Trichosanthes kirilowii strains].

Trichosanthes kirilowii has been widely cultivated as its medicinal use, health care and food value. Drought resistance of seedlings is an important feature in breeding. Seeds of two T. kirilowii strains were used to research the difference of surface ultrastructure characteristic and drought resistance. Scanning electron microscope was used to identify the surface ultrastructure characteristic of seeds and PEG was used to simulate drought stress. The seeds germination rate, MDA content, chlorophyll content and the antioxidant enzymes activity were measured under the drought stress. The results showed that the seed surface colour of KXY-001 was lighter than that of KXY-005. The testa cobwebbing of KXY-001 was more intensive than that of KXY-005. The germination rate of KXY-001 was higher than that of KXY-005 under drought stress. The MDA content was increased and the chlorophyll content was decreased with the increasing of drought degree. The SOD activity of KXY-001 was higher than that of KXY-005, while the activity of POD and CAT was also increased firstly and decreased later. Surface reticulate of seeds and hilar traits can be used as identification points to identify the investigated strains. SOD and POD are activated to resist drought in T. kirilowii seedlings and the drought resistance of KXY-001 is superior than that of KXY-005.

Tongue squamous cell carcinoma treated by 5-aminolevulinic acid administrated through Microdrop method.

BACKGROUND: Postoperative recurrence of tongue squamous cell carcinoma (TSCC) has always been a clinical problem for patients and doctors. Surgery and radiotherapy are the main treatment methods for TSCC, but reoperation often leads to functional impairment. Side effects of radiotherapy include mucosal gland damage, dry mouth, weakened or lost taste. Improved treatment is needed. OBJECTIVE: To evaluate the clinical outcome of a patient with TSCC treated with Microdrop aminolevulinic acid (ALA) photodynamic treatment (PDT) twice. METHODS: ALA was dissolved in 5 % lidocaine and the concentration of ALA was 20 % by Microdrop method. Then, the tumor tissue was expanded 1 cm outward, and the injection points were evenly distributed with an upper and lower left and right interval of 2-3 mm. The 1 ml syringe was used to perform the injection in the skin of the tumor area, and there was a small cuticle at each injection point. A pathologically confirmed patient with TSCC received twice Microdrop ALA-PDT treatments, which were evaluated at 1 month and 4 months later. RESULTS: After 3 h of Microdrop ALA injection, the wavelength of semiconductor laser was set to 630 nm, and the energy of 300 mW /cm2 was irradiated for 30 min. After two treatments, the lesions were not visible, and no recurrence occurred after 4 months of follow-up. The patient's tongue function was well preserved and the cosmetic effect was good. CONCLUSION: Microdrop ALA-PDT may be effective in the salvage treatment of select tongue squamous cell carcinoma.

Evaluation of the accuracy of seven intraoral scanners for the full dentate and partially edentulous complete-arch mandibular casts: An in vitro comparison.

Statement of problem: Intraoral scanners (IOSs) are widely used in dentistry, providing high accuracy in short-range scanning. Nevertheless, when scanning the full dental arch, it remains a challenge. Furthermore, there is a lack of studies reporting the differences in scan accuracy between dental arches with large-span mucosal areas and fully dentate casts or optimal IOS selection for different dental statuses. Purpose: This study aimed to evaluate the accuracy and scanning time of different IOSs for full dentate (FD) and partially edentulous (PE) casts with missing teeth in the #34-#44 range and to determine the IOSs with the optimal clinical adaptability and scanning accuracy for different complete-arch casts. Material and methods: Reference scans of two complete-arch (FD and PE) casts were obtained using a laboratory scanner (Ceramill Map 600). Subsequently, the same casts were scanned ten times each by seven IOSs (3Shape Trios 3, CS3600, Planmeca Emerald, iTero Element 5D, Medit i500, BAMBOO B1, and Shining Aoralscan 3), and the scanning time was recorded. The test data were superimposed on the reference scans for the selected areas, and three-dimensional deviations between the reference and test casts (trueness), and between test casts (precision) were determined using reverse engineering software (Geomagic Wrap). The dataset was analyzed using a two-factor analysis of variance with post-hoc Bonferroni tests. Results: Two-factor analysis of variance revealed significant differences in accuracy and scanning time for different casts (P < 0.001) and IOSs (P < 0.001). For the FD cast, the i500 (0.35 ± 0.11 mm trueness) and CS3600 (0.23 ± 0.12 mm precision) performed worse than the remaining scanners. For the PE cast, the BAMBOO B1(0.89 ± 0.58 mm trueness; 0.88 ± 0.48 mm precision) performed worse than the remaining scanners. There were no differences in the accuracy of scanning between the Element 5D and Emerald for both cast types. However, the scanning time differed significantly between the different IOSs (P < 0.001). Regardless of the cast type, the fastest and slowest scans were performed by the Trios3 and CS3600 scanners respectively. Conclusions: The accuracy and scanning time differed between the different IOSs and types of complete-arch casts.

Polystyrene microplastic-induced oxidative stress triggers intestinal barrier dysfunction via the NF-κB/NLRP3/IL-1ß/MCLK pathway.

Emerging evidence has demonstrated the association between microplastics (MPs) with a diameter of <5 mm and the risk of intestinal diseases. However, the molecular mechanisms contributing to MP-induced intestinal barrier dysfunction have not been fully appreciated. In this study, C57BL/6 J mice were exposed to polystyrene microplastics (PS-MPs, 0.2, 1 or 5 µm) at 1 mg/kg body weight daily by oral gavage for 28 days. We found that PS-MPs exposure induced oxidative stress and inflammatory cell infiltration in mice colon, leading to an increased expression of pro-inflammatory cytokine. Moreover, there were an increase in intestinal permeability and decrease in mucus secretion, accompanied by downregulation of tight junction (TJ)-related zonula occluden-1 (ZO-1), occluding (OCLN) and claudin-1 (CLDN-1) in mice colon. Especially, 5 µm PS-MPs (PS5)-induced intestinal epithelial TJ barrier damage was more severe than 0.2 µm PS-MPs (PS0.2) and 1 µm PS-MPs (PS1). In vitro experiments indicated that PS5-induced oxidative stress upregulated the expression of nuclear factor kappa B (NF-κB), nucleotide-binding domain and leucine-rich repeat protein 3 (NLRP3) inflammasome, and myosin light chain kinase (MLCK). Meanwhile, pre-treatment with the antioxidant NAC, NLRP3 inhibitor MCC950 and MLCK inhibitor ML-7 considerably reduced PS5-triggered reactive oxygen species (ROS) production and inflammatory response, inhibited the activation of the NF-κB/NLRP3/MLCK pathway, and upregulated ZO-1, OCLN and CLDN-1 expression in Caco-2 cells. Taken together, our study demonstrated that PS-MPs cause intestinal barrier dysfunction through the ROS-dependent NF-κB/NLRP3/IL-1ß/MLCK pathway.