Cluster-Dominated Electrochemiluminescence of Tertiary Amines in Polyethyleneimine Nanoparticles: Mechanism Insights and Sensing Application.

Designing and screening highly efficient and cost-effective luminophores have always been a challenge to develop sensitive electrochemiluminescence (ECL) biosensors. Herein, polyethyleneimine nanoparticles (PEI NPs), a kind of nonconjugated polymer (NCP) NPs with tertiary amine clusters, were developed as an ECL luminophore. Specifically, PEI NPs were synthesized by a one-step hydrothermal method using PEI and formaldehyde. The properties of PEI NPs were investigated in detail using photochemical and electrochemical techniques. The results showed cluster-dominated luminescence of tertiary amines in PEI NPs via "through-space conjugation". This non-negligible ECL performance (at 631 nm) was also verified by the initiated reduction-oxidation process. With persulfate as a coreactant, PEI NPs acted as both the luminophore and coreaction accelerator to enhance the ECL intensity remarkably, which was eightfold higher than that of isolated PEI. Moreover, choosing dopamine as the model target, a highly sensitive "signal off" ternary ECL sensor was constructed utilizing PEI NPs as the luminophore. Dopamine could be oxidized to benzoquinone at the sensing interface, quenching the signal via ECL energy transfer. Free from any signal amplification, the proposed sensor achieved a low detection limit (4.3 nM) for target monitoring with good selectivity and stability. This strategy not only provides a unique perspective for designing novel efficient and facile ECL luminophores of tertiary amines but also broadens the biological application of NCP NPs.

miR-124-3p increases in high glucose induced osteocyte-derived exosomes and regulates galectin-3 expression: A possible mechanism in bone remodeling alteration in diabetic periodontitis.

The mechanisms underlying the two-way relationship between diabetes mellitus (DM) and periodontitis are unclear. We examined a possible effect of galectin-3 (Gal-3), a factor in DM and bone metabolism, on periodontitis with or without DM. Using enzyme-linked immunosorbent assay, we detected saliva Gal-3 in patients with periodontitis, with or without type 2 diabetes mellitus (T2DM). In animal models, we measured periodontal bone microarchitecture via micro computed tomography, and detected Gal-3, Runt-related transcription factor 2 (Runx2), and interleukin-6 (IL-6) expression in alveolar bone. Applying dual luciferase reporter assay, we explored the target binding of miR-124-3p and Gal-3. We examined osteocyte-derived exosomes with transmission electron microscopy and detected miR-124-3p, Gal-3, and IL-6 expression in exosomes. Saliva Gal-3 was increased in DM compared with controls but decreased in patients with moderate periodontitis and DM compared with those who had moderate periodontitis only. Alveolar bone mass was increased in DM and exacerbated in DM with periodontitis. Gal-3 and Runx2 were both increased in periodontitis and DM compared with controls, but decreased in DM with periodontitis compared with DM alone. MiR-124-3p targeted and inhibited Gal-3 expression in vitro. Osteocytes secreted exosomes carrying miR-124-3p, Gal-3, and IL-6, which were influenced by high glucose. These findings indicate that osteocyte-derived exosomes carrying miR-124-3p may regulate Gal-3 expression of osteoblasts, especially under high-glucose conditions, suggesting a possible mechanism for DM-related alveolar bone pathologies.

Study of biodegradable occluder of atrial septal defect in a porcine model.

OBJECTIVE: To evaluate the safety and feasibility of a modified poly(l-lactic acid) (PLLA) atrial septal defect (ASD) occluder. METHODS: Forty-five piglets were divided into two groups: an experimental group (n = 27) and a control group (n = 18). The experimental group underwent percutaneous implantation of a modified PLLA ASD device while the control group underwent percutaneous implantation of a widely used metal ASD device. X-ray imaging, transthoracic echocardiography (TTE), electrocardiogram (ECG), histopathology and electron microscopic examination were performed at 7 days, 1, 3, 6, and 12 months after implantation. RESULTS: Twenty-seven experimental piglets and 18 control piglets were all successfully implanted with modified biodegradable and metal ASD devices, respectively. While both devices exhibited very good occluding effects, the modified PLLA ASD devices were completely endothelialized at 3 months after implantation, and the endothelialization appeared to be more complete compared to the control group. Degradation of the PLLA devices was noted at 12 months follow-up with no loss of integrity at the atrial septum. CONCLUSION: This animal model with implanting of the occluders was effective and not associated with complications. The modified PLLA ASD devices are more controllable and practical than our previous devices. The implanted devices demonstrated good endothelialization and degradability in short and moderate term follow-up. Long-term studies are now underway to further evaluate the biodegradability of this novel device.

Actinomyces marmotae sp. nov. and Actinomyces procaprae sp. nov. isolated from wild animals and reclassification of Actinomyces liubingyangii and Actinomyces tangfeifanii as Boudabousia liubingyangii comb. nov. and Boudabousia tangfeifanii comb. nov., respectively.

Four Gram-stain-positive, catalase-negative, non-spore-forming, rod-shaped bacterial strains (zg-325T, zg329, dk561T and dk752) were isolated from the respiratory tract of marmot (Marmota himalayana) and the faeces of Tibetan gazelle (Procapra picticaudata) from the Qinghai-Tibet Plateau of PR China. The results of 16S rRNA gene sequence-based phylogenetic analyses indicated that strains zg-325T and dk561T represent members of the genus Actinomyces, most similar to Actinomyces denticolens DSM 20671T and Actinomyces ruminicola B71T, respectively. The DNA G+C contents of strains zg-325T and dk561T were 71.6 and 69.3 mol%, respectively. The digital DNA-DNA hybridization values of strains zg-325T and dk561T with their most closely related species were below the 70 % threshold for species demarcation. The four strains grew best at 35 °C in air containing 5 % CO2 on brain heart infusion (BHI) agar with 5 % sheep blood. All four strains had C18:1ω9c and C16:0 as the major cellular fatty acids. MK-8 and MK-9 were the major menaquinones in zg-325T while MK-10 was predominant in dk561T. The major polar lipids included diphosphatidylglycerol and phosphatidylinositol. On the basis of several lines of evidence from phenotypic and phylogenetic analyses, zg-325T and dk561T represent novel species of the genus Actinomyces, for which the name Actinomyces marmotae sp. nov. and Actinomyces procaprae sp. nov. are proposed. The type strains are zg-325T (=GDMCC 1.1724T=JCM 34091T) and dk561T (=CGMCC 4.7566T=JCM 33484T). We also propose, on the basis of the phylogenetic results herein, the reclassification of Actinomyces liubingyangii and Actinomyces tangfeifanii as Boudabousia liubingyangii comb. nov. and Boudabousia tangfeifanii comb. nov., respectively.

Tantalum-incorporated hydroxyapatite coating on titanium implants: its mechanical and in vitro osteogenic properties.

OBJECTIVE: The fabrication of bioactive coatings on metallic implants to enhance osseointegration has become a topic of general interest in orthopedics and dentistry. Hydroxyapatite (HA) coating has been shown to induce bone formation and promote bone-implant integration. Unfortunately, poor mechanical performance has hindered this from becoming a favorable coating material. The majority of present studies have focused in incorporating different elements into HA coatings to improve mechanical properties. In recent years, tantalum (Ta) has received increasing attention due to its excellent biocompatibility and corrosion resistance. The aim of on the present study was to investigate the fabrication and biological performance of Ta-incorporated HA coatings. METHODS: Ta-incorporated HA coatings were fabricated using the plasma spray technique on a titanium substrate, and the surface characteristics and mechanical properties were examined. In addition, the effects of Ta-incorporated HA coatings on the biological behavior of mesenchymal stem cells (BMSCs) were investigated. RESULTS: Ta-incorporated HA coatings with microporous structure had higher roughness and wettability. In addition, the bonding strength of Ta/HA coatings with the substrate was substantially superior to HA coatings. Furthermore, Ta-incorporated HA coatings not only facilitated initial cell adhesion and faster proliferation, but also promoted the osteogenic differentiation of BMSCs. CONCLUSION: These results indicate that the incorporation of Ta could improve mechanical performance and increase the osteogenic activity of HA coatings. The Ta-incorporated HA coating fabricated by plasma spraying is expected to be a promising bio-coating material for metallic implants.

A Novel-Design Poly-L-Lactic Acid Biodegradable Device for Closure of Atrial Septal Defect: Long-Term Results in Swine.

OBJECTIVES: The aim of this study is to evaluate the long-term effectiveness and safety of a self-expandable, double-disk biodegradable device made of poly-L-lactic acid (PLLA) for closure of atrial septal defects (ASDs) in swine. METHODS: ASDs were created by transseptal needle puncture followed by balloon dilatation in 20 piglets. The experimental group comprised 18 animals, while the remaining 2 animals were used as controls. Effectiveness and safety were evaluated by rectal temperature, leukocyte count, chest radiography, electrocardiogram, transthoracic echocardiography (TTE), intracardiac echocardiography (ICE), and histologic studies. Animals were followed up at 1, 3, 6, and 12 months. RESULTS: An ASD model was successfully created in 19 animals; 1 piglet died during the procedure. The ASD diameters that were created ranged from 5 to 6.4 mm. Devices were successfully implanted in 17 animals. No animal died during the follow-up studies. Rectal temperatures and electrocardiograms were normal at follow-up, while leukocyte counts transiently increased from 1 to 6 months. Radiography, TTE, ICE, and macroscopic studies demonstrated that PLLA occluders were positioned well, with no shifting, mural thrombus formation, or atrioventricular valve insufficiency. Histologic evaluations showed that PLLA devices were partially degraded in the follow-up study. CONCLUSIONS: ASD closure with the novel PLLA biodegradable device is safe and effective. Longer-term studies are needed to evaluate long-term biodegradability.

Preparation of pH-responsive polyurethane nano micelles and their antibacterial application.

Considering the differences in pH between bacterial infection microenvironment and normal tissues, a series of pH-responsive drug-release amphiphilic polyurethane copolymers (DPU-g-PEG) have been prepared in this work. Fourier transform infrared (FT-IR) spectroscopy and 1H NMR was selected to detect the structure of the condensed polymers. The DPU-g-PEG amphiphilic copolymers could form stable micelles with a hydrophilic shell of polyethylene glycol (PEG) and a hydrophobic core of polylactic acid (PLA). We loaded a model drug called triclosan onto DPU-g-PEG micelles and studied how pH affects their particle size, Zeta potential, and drug release performance. The results revealed that when exposed to acidic conditions, the surface potential of DPU-g-PEG micelles changed, the micelles' particle size increased, and the drug release performance was significantly enhanced. These results suggested that the micelles prepared in this study can release more antibacterial substances at sites of bacterial infection. Meanwhile, we also investigated the impact of different ratios of soft and hard segments on the properties of micelles, and the results showed that the pH responsiveness of micelles was strongest when the ratio of soft segments (PLLA diol + PEG 2000): 1,6-hexamethylene diisocyanate (HDI): 2,6-Bis-(2-hydroxy-ethyl)-pyrrolo[3,4-f]isoindole-1,3,5,7-tetraone (DMA) = 1: 1.2: 0.2. Furthermore, the results of inhibition zone test, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) all confirmed the antibacterial activity of triclosan-load DPU-g-PEG micelles. In conclusion, the DPU-g-PEG micelles produced in this study have the potential to be used as intelligent drug delivery systems in the biomedical field.

Metabolic flux analysis of Gluconacetobacter xylinus for bacterial cellulose production.

Metabolic flux analysis was used to reveal the metabolic distributions in Gluconacetobacter xylinus (CGMCC no. 2955) cultured on different carbon sources. Compared with other sources, glucose, fructose, and glycerol could achieve much higher bacterial cellulose (BC) yields from G. xylinus (CGMCC no. 2955). The glycerol led to the highest BC production with a metabolic yield of 14.7 g/mol C, which was approximately 1.69-fold and 2.38-fold greater than that produced using fructose and glucose medium, respectively. The highest BC productivity from G. xylinus CGMCC 2955 was 5.97 g BC/L (dry weight) when using glycerol as the sole carbon source. Metabolic flux analysis for the central carbon metabolism revealed that about 47.96 % of glycerol was transformed into BC, while only 19.05 % of glucose and 24.78 % of fructose were transformed into BC. Instead, when glucose was used as the sole carbon source, 40.03 % of glucose was turned into the by-product gluconic acid. Compared with BC from glucose and fructose, BC from the glycerol medium showed the highest tensile strength at 83.5 MPa, with thinner fibers and lower porosity. As a main byproduct of biodiesel production, glycerol holds great potential to produce BC with superior mechanical and microstructural characteristics.

Novel electrochemiluminescence luminophore based on flower-like binuclear coordination polymer for high-sensitivity detection of tetracycline in food products.

To meet the growing concerns about food safety, sensors for tetracycline antibiotics have been urgently needed. Herein, we synthesized a series of binuclear coordination polymers (Tb-Zn-CPs) based on lanthanide and transition metal ions by solvothermal method using [1,1':4',1''-terphenyl]-3,3'',5,5''-tetracarboxylic acid, Tb(NO3)3 and Zn(NO3)2. The morphologies and electrochemiluminescence (ECL) performances of Tb-Zn-CPs varied with different molar ratios of terbium and zinc ions (Tb:Zn). The flower-like Tb-Zn-CP (9:3) possessed the highest ECL intensity due to the ligand antenna effect and the sensitization of Zn2+. An ECL sensor for the detection of tetracycline (TC) was constructed utilizing Tb-Zn-CP (9:3) as a novel ECL luminophore and potassium persulfate as a coreactant. The proposed sensor achieved sensitive detection of TC in the range of 5.0 fmol·L-1 to 3.0 mmol·L-1 with a low limit of detection (1.6 fmol·L-1). It also was applied for TC detection in dairy products with good recovery rates.

The feasibility and efficacy of ultrasound-guided percutaneous laser ablation for multifocal papillary thyroid microcarcinoma.

Objective: The aim of this study was to evaluate the feasibility and efficacy of percutaneous laser ablation (PLA) for patients with multifocal papillary thyroid microcarcinoma (PTMC). Materials and methods: A cohort of patients who underwent ultrasound (US)-guided PLA for primary PTMC were enrolled in this study. The patients were divided into a multifocal PTMC (multi-PTMC) group and a unifocal PTMC (uni-PTMC) group. Before PLA, conventional US and contrast-enhanced ultrasound (CEUS) were performed to evaluate the PTMC and cervical lymph nodes. The operation time, energy, power, amount of isolation liquid, and complications during PLA were recorded. Patients were followed up at 2 days, 1 month, 3 months, and 6 months, and every 6 months after that. Volume reduction rate (VRR), local tumor recurrence, and lymph node metastasis after PLA were observed. Results: The study included 12 patients with 26 PTMCs and 60 patients with 60 PTMCs. The operation time, total energy, and amount of isolation liquid in the multi-PTMC group were more than those in the uni-PTMC group (p = 0.000, 0.007, and 0.020, respectively). The mean follow-up durations in multi-PTMC and uni-PTMC groups were 19.75 ± 11.46 months (6-36 months) and 16.33 ± 10.01 months (4-40 months), with a similar VRR of the ablated lesions in the two groups. One and three cases with newly developed PTMCs were observed in the multi-PTMC group and the uni-PTMC group during follow-up, respectively. There was no regrowth of treated lesions, lymph node metastasis, or distant metastasis. At the end of the follow-up, all the ablated lesions in the two groups completely disappeared or only remained scar strips. Conclusion: PLA is a safe and effective technique for treating multifocal PTMC, which might be an alternative technique for patients who are not eligible or are unwilling to undergo surgery.

Targeted delivery of edaravone by liposomes for the treatment of ischemic stroke.

Aim: To construct an edaravone-encapsulated liposomes (EDV-LIPs) formulation against acute ischemic stroke. Methods: EDV-LIPs were prepared by the film dispersion method. The biosafety was evaluated both in vitro and in vivo by flow cytometry and the histological staining method. Biodistribution and therapeutic effect of EDV-LIPs against acute ischemic stroke was investigated by fluorescent imaging, the behavior test, laser speckle imaging and triphenyltetrazolium chloride staining. Results: The nanoliposomes had a long circulation time and could accumulate in the brain lesion region in ischemic stroke rats. EDV-LIPs show good biosafety. EDV-LIPs could restore more cerebral blood flow, reduce infarct volume and decrease neuronal apoptosis. Conclusion: EDV-LIPs provide an effective alternative for drug-targeted delivery against acute ischemic stroke.

Comprehensive phylogeographic and phylodynamic analyses of global Senecavirus A.

Senecavirus A (SVA) is a member of the genus Senecavirus in the family Picornaviridae that infects pigs and shows symptoms similar to foot and mouth diseases and other vesicular diseases. It is difficult to prevent, thus, causing tremendous economic loss to the pig industry. However, the global transmission routes of SVA and its natural origins remain unclear. In this study, we processed representative SVA sequences from the GenBank database along with 10 newly isolated SVA strains from the field samples collected from our lab to explore the origins, population characteristics, and transmission patterns of SVA. The SVA strains were firstly systematically divided into eight clades including Clade I-VII and Clade Ancestor based on the maximum likelihood phylogenetic inference. Phylogeographic and phylodynamics analysis within the Bayesian statistical framework revealed that SVA originated in the United States in the 1980s and afterward spread to different countries and regions. Our analysis of viral transmission routes also revealed its historical spread from the United States and the risk of the global virus prevalence. Overall, our study provided a comprehensive assessment of the phylogenetic characteristics, origins, history, and geographical evolution of SVA on a global scale, unlocking insights into developing efficient disease management strategies.

A Biodegradable Metal-Polymer Composite Stent Safe and Effective on Physiological and Serum-Containing Biomimetic Conditions.

The new-generation coronary stents are expected to be biodegradable, and then the biocompatibility along with biodegradation becomes more challenging. It is a critical issue to choose appropriate biomimetic conditions to evaluate biocompatibility. Compared with other candidates for biodegradable stents, iron-based materials are of high mechanical strength, yet have raised more concerns about biodegradability and biocompatibility. Herein, a metal-polymer composite strategy is applied to accelerate the degradation of iron-based stents in vitro and in a porcine model. Furthermore, it is found that serum, the main environment of vascular stents, ensured the safety of iron corrosion through its antioxidants. This work highlights the importance of serum, particularly albumin, for an in vitro condition mimicking blood-related physiological condition, when reactive oxygen species, inflammatory response, and neointimal hyperplasia are concerned. The resultant metal-polymer composite stent is implanted into a patient in clinical research via interventional treatment, and the follow-up confirms its safety, efficacy, and appropriate biodegradability.

Genetic characterization of H1N2 influenza a virus isolated from sick pigs in Southern China in 2010.

In China H3N2 and H1N1 swine influenza viruses have been circulating for many years. In January 2010, before swine were infected with foot and mouth disease in Guangdong, some pigs have shown flu-like symptoms: cough, sneeze, runny nose and fever. We collected the nasopharyngeal swab of all sick pigs as much as possible. One subtype H1N2 influenza viruses were isolated from the pig population. The complete genome of one isolate, designated A/swine/Guangdong/1/2010(H1N2), was sequenced and compared with sequences available in GenBank. The nucleotide sequences of all eight viral RNA segments were determined, and then phylogenetic analysis was performed using the neighbor-joining method. HA, NP, M and NS were shown to be closely to swine origin. PB2 and PA were close to avian origin, but NA and PB1were close to human origin. It is a result of a multiple reassortment event. In conclusion, our finding provides further evidence about the interspecies transmission of avian influenza viruses to pigs and emphasizes the importance of reinforcing swine influenza virus (SIV) surveillance, especially before the emergence of highly pathogenic FMDs in pigs in Guangdong.

[All-ceramic resin bonded fixed partial denture made of IPS hot-pressed casting porcelain restore anterior missing teeth: a three years clinical observation].

OBJECTIVE: To clinic observation of IPS Empress2 and IPS e.max all ceramic resin bonded fixed partial dentures used in one anterior teeth lost in upper jaw or less than two anterior tooth lost in lower jaw. METHODS: 22 patients, 26 restorations had been made, which included 16 single-retainer all ceramic resin bonded fixed partial dentures and 10 two-retainers all ceramic resin bonded fixed partial dentures. Secondary caries of the abutments, shade in the margin of the retainers and the integrity of the restorations had been observed at 3 months, 6 months, 1 year, 2 years and 3 years after all ceramic resin bonded fixed partial dentures having been bonded. RESULTS: In the 3 years of clinic observation of the anterior all ceramic resin bonded fixed partial dentures, 1 two-retainers restoration lost bond after it had been made for 3 months, a retainer of one two-retainers restoration was broken after 6 months, but they are still used after modified as one-retainer all ceramic resin bonded fixed partial dentures, 1 two-retainers restoration lost bond two year later, It was integrity and re-bonded again that was still stable. No secondary carries and no shade in margin of the retainers had been found. Their color matches with the nature teeth excellently. The success rate was 88.5%. CONCLUSION: IPS Empress 2 and IPS e.max all ceramic resin bonded fixed partial dentures should be a good selection in one or two teeth lose in anterior jaws.

Functionalized europium-porphyrin coordination polymer: Rational design of high performance electrochemiluminescence emitter for mucin 1 sensing.

The excellent characteristics of porphyrins have inspired widespread interest in electrochemiluminescence (ECL). However, the limited ECL intensity and poor stability of porphyrins in aqueous solution are still severely restricted further biological application. Here, we subtly synthesized a functionalized europium and 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin (TCPP) coordination polymer (Eu-PCP) by a one-step solvothermal method. In sharp contrast to the pristine TCPP, Eu-PCP showed a higher and more stable ECL red-light emission (673 nm) at low potential (-1.1 V, vs Ag/AgCl), which was 7.7-fold higher ECL intensity and 4.6-fold efficiency. In view of the crucial role of mucin 1 (MUC1) in tumor overexpression, it was selected as the target molecule. Combined with exonuclease III (Exo III)-assisted recycling amplification strategy, a ternary ECL biosensor was constructed for the MUC1 detection based on Eu-PCP as a satisfied ECL emitter, gold nanoparticles capped CeO2 (CeO2@Au) as the coreactant accelerator and peroxydisulfate as coreactant. Meanwhile, gold nanoparticles capped MnO2 (MnO2@Au) was used as the quenching probe to achieve a highly sensitive detection of MUC1. The proposed biosensor exhibited a wide linear range from 1 fg mL-1 to 10 ng mL-1 with a low limit of detection (0.32 fg mL-1). By changing the corresponding target recognition DNA, this strategy could be expanded to detect other biomarkers.

Prophylactic vertebral augmentation in patients with intra-disc leakage after kyphoplasty.

BACKGROUND: A uperior adjacent vertebral fracture (SAVF) is a common complication after kyphoplasty. Intra-disc leakage is a significant risk factor of SAVF. However, to date, no studies on the prevention of SAVF after intra-disc leakage have been conducted. This study sought to evaluate the clinical outcome of prophylactic vertebral augmentation in high-risk patients, and explore the other risk factors of SAVF. METHODS: Of 2,571 patients who received kyphoplasty, 82 with intra-disc leakage were retrospectively enrolled in the study, and divided into 2 groups based on whether they had a superior level of prophylactic vertebral augmentation. To ensure that any possible early complications were examined, there was a minimum follow-up period of 12 months. RESULTS: The pre-operation parameters were comparable between the 2 groups. In the non-prophylactic group, 9 of 59 (15.3%) patients had SAVF superior to the level of intra-disc leakage. Of these 9 SAVF cases, 8 fractures (88.9%) occurred within 6 months after surgery. Overall, 14 (23.7%) patients developed a new fracture. In the prophylactic group, no patients had a SAVF (0.0%), but 3 (13.0%) had remote fractures (P=0.047 and 0.284). No complications were associated with vertebral augmentation. Further, the risk factor analysis showed that patients with comorbidities and a history of corticoid use had a higher risk of fracture compared with patients with none of these risk factor [odds ratios: 12.0, 95% confidence interval (CI): 1.0-143, and 34.3, 95% CI: 3.2-364.5, respectively]. CONCLUSIONS: Prophylactic vertebral augmentation can prevent SAVF without complications. Patients with comorbidities and a history of corticoid use had a higher risk of SAVF compared with patients without corticoid use. Thus, we recommend prophylactic vertebral augmentation in the selected high-risk patients.

[Distribution and Sources of Microplastics in Farmland Soil Along the Fenhe River].

This study investigated the distribution and sources of microplastics smaller than 1 mm in farmland soil along the Fenhe River. Microplastics in soil samples were separated and extracted using the traditional density centrifugation method. The quantity and type of microplastics were examined with a stereomicroscope. The micro-morphology of plastic particles were observed with a scanning electron microscope-energy dispersive spectrometer. The chemical composition was determined using Fourier transform infrared spectroscopy. The results indicate that the average abundance of microplastics in farmland soil along the Fenhe River is 290.5 n ·kg-1. These microplastics occur as fibers, films, fragments, and foams. Fiber microplastics are the most abundant, accounting for 52.67% of the total, and are mostly composed of polyethylene. Films and fragments mainly consist of polypropylene whereas the foams consist of polystyrene. Soil samples from different parts of the Fenhe River can be ranked according to the microplastics content in the following order:downstream>midstream>upstream. The abundance of microplastics in soil from the downstream region of the Fenhe River was 500.0 n ·kg-1, twice that of from the upstream and midstream regions. The results of the random forest model indicate that the sources of microplastics in farmland soil along the Fenhe River are closely related to the amount of agricultural films, population, gross domestic product, and industrial production. Among these factors, the amount of agricultural films is a key factor that influences the occurrence of microplastics in farmland soil along the Fenhe River.

Surface modification to enhance cell migration on biomaterials and its combination with 3D structural design of occluders to improve interventional treatment of heart diseases.

The dominant source of thromboembolism in heart comes from the left atrial appendage (LAA). An occluder can close LAA and significantly reduce the risk of strokes, particularly for those patients with atrial fibrillation. However, it is technically challenging to fabricate an LAA occluder that is appropriate for percutaneous implantation and can be rapidly endothelialized to accomplish complete closure and avoid severe complication. Hypothesizing that a fast migration rate of endothelial cells on the implant surface would lead to rapid endothelialization, we fabricated an LAA occlusion device for interventional treatment with a well-designed 3D architecture and a nanoscale 2D coating. Through screening of biomaterials surfaces with cellular studies in vitro including cell observations, qPCR, RNA sequencing, and implantation studies in vivo, we revealed that a titanium-nitrogen nanocoating on a NiTi alloy promoted high migration rate of endothelial cells on the surface. The effectiveness of this first nanocoating LAA occluder was validated in animal experiments and a patient case, both of which exhibited successful implantation, fast sealing and long-term safety of the device. The mechanistic insights gained in this study will be useful for the design of medical devices with appropriate surface modification, not necessarily for improved cell adhesion but sometimes for enhanced cell migration.

Biodegradable polymeric occluder for closure of atrial septal defect with interventional treatment of cardiovascular disease.

The next-generation closure device for interventional treatment of congenital heart disease is regarded to be biodegradable, yet the corresponding biomaterial technique is still challenging. Herein, we report the first fully biodegradable atrial septal defect (ASD) occluder finally coming into clinical use, which is made of biodegradable poly(l-lactic acid) (PLLA). We characterized the physico-chemical properties of PLLA fibers as well as the raw polymer and the operability of the as-fabricated occluders. Cell behaviors on material were observed, and in vivo fiber degradation and inflammatory responses were examined. ASD models in piglets were created, and 44 PLLA ASD occluders were implanted via catheter successfully. After 36 months, the PLLA ASD occluders almost degraded without any complications. The mechanical properties and thickness between newborn and normal atrial septum showed no significant difference. We further accomplished the first clinical implantation of the PLLA ASD occluder in a four-year boy, and the two-year follow-up up to date preliminarily indicated safety and feasibility of such new-generation fully biodegradable occluder made of synthetic polymers.