Transcatheter arterial embolization with N-butyl cyanoacrylate for postoperative hemorrhage treatment following pancreatoduodenectomy.

PURPOSE: Postoperative hemorrhage (PPH) is a severe complication of pancreatoduodenectomy (PD) with a mortality rate of 5-20.2% and mortality due to hemorrhage of 11-58%. Transcatheter arterial embolization (TAE) has been widely recommended for PPH, however, TAE with N-butyl cyanoacrylate (NBCA) for PPH treatment has been reported rarely. Therefore, this study aimed to evaluate the safety and efficacy of TAE with NBCA for PPH treatment following PD. METHODS: This retrospective study included 14 male patients (mean age, 60.93 ± 10.97 years) with postoperative hemorrhage following PD treated with TAE using NBCA as the main embolic agent from October 2019 to February 2022. The clinical data, technical and success rate, and complications were analyzed. RESULTS: Among the 14 patients who underwent TAE, the technical and clinical success rates were 100 and 85.71%, respectively. Angiography revealed contrast extravasation in 12 cases and a pseudoaneurysm in 3 cases. One patient developed a serious infection and died 2 days after the TAE. CONCLUSION: TAE with NBCA for PPH treatment following PD, especially for massive hemorrhage caused by a pancreatic fistula, biliary fistula, or inflammatory corrosion, can result in rapid and effective hemostasis with high safety.

[Structural design and evaluation of bone remodeling effect of fracture internal fixation implants with time-varying stiffness].

The stiffness of an ideal fracture internal fixation implant should have a time-varying performance, so that the fracture can generate reasonable mechanical stimulation at different healing stages, and biodegradable materials meet this performance. A topology optimization design method for composite structures of fracture internal fixation implants with time-varying stiffness is proposed, considering the time-dependent degradation process of materials. Using relative density and degradation residual rate to describe the distribution and degradation state of two materials with different degradation rates and elastic modulus, a coupled mathematical model of degradation simulation mechanical analysis was established. Biomaterial composite structures were designed based on variable density method to exhibit time-varying stiffness characteristics. Taking the bone plate used for the treatment of tibial fractures as an example, a composite structure bone plate with time-varying stiffness characteristics was designed using the proposed method. The optimization results showed that material 1 with high stiffness formed a columnar support structure, while material 2 with low stiffness was distributed at the degradation boundary and inside. Using a bone remodeling simulation model, the optimized bone plates were evaluated. After 11 months of remodeling, the average elastic modulus of callus using degradable time-varying stiffness plates, titanium alloy plates, and stainless steel plates were 8 634 MPa, 8 521 MPa, and 8 412 MPa, respectively, indicating that the use of degradable time-varying stiffness plates would result in better remodeling effects on the callus.

Guard Cell Transcriptome Reveals Membrane Transport, Stomatal Development and Cell Wall Modifications as Key Traits Involved in Salinity Tolerance in Halophytic Chenopodium quinoa.

A comparative investigation was conducted to evaluate transcriptional changes in guard cells (GCs) of closely related halophytic (Chenopodium quinoa) and glycophytic (Spinacia oleracea) species. Plants were exposed to 3 weeks of 250 mM sodium chloride treatment, and GC-enriched epidermal fragments were mechanically prepared. In both species, salt-responsive genes were mainly related to categories of protein metabolism, secondary metabolites, signal transduction and transport systems. Genes related to abscisic acid (ABA) signaling and ABA biosynthesis were strongly induced in quinoa but not in spinach GCs. Also, expression of the genes encoding transporters of amino acids, proline, sugars, sucrose and potassium increased in quinoa GCs under salinity stress. Analysis of cell-wall-related genes suggests that genes involved in lignin synthesis (e.g. lignin biosynthesis LACCASE 4) were highly upregulated by salt in spinach GCs. In contrast, transcripts related to cell wall plasticity Pectin methylesterase3 (PME3) were highly induced in quinoa. Faster stomatal response to light and dark measured by observing kinetics of changes in stomatal conductance in quinoa might be associated with higher plasticity of the cell wall regulated by PME3 Furthermore, genes involved in the inhibition of stomatal development and differentiation were highly expressed by salt in quinoa, but not in spinach. These changes correlated with reduced stomatal density and index in quinoa, thus improving its water use efficiency. The fine modulation of transporters, cell wall modification and controlling stomatal development in GCs of quinoa may have resulted in high K+/Na+ ratio, lower stomatal conductance and higher stomatal speed for better adaptation to salinity stress in quinoa.

Comparison of Polyvinyl Alcohol Versus Combination of Lipiodol-Bleomycin Emulsion and NBCA-Lipiodol Emulsion for Renal Angiomyolipoma Embolization: A Prospective Randomized Study.

BACKGROUND. Consensus is lacking regarding optimal embolic agents for transcatheter arterial embolization (TAE) of renal angiomyolipomas (AMLs). OBJECTIVE. The purpose of our study was to compare the safety and efficacy of TAE with polyvinyl alcohol (PVA) and TAE with a combination of ethiodized oil (Lipiodol)-bleomycin emulsion and N-butyl cyanoacrylate (NBCA)-Lipiodol emulsion for the treatment of patients with large or symptomatic AMLs. METHODS. This prospective study enrolled patients referred for TAE of a large (> 4 cm) or symptomatic renal AML from July 2007 to December 2018. Patients were randomized to undergo TAE using PVA particles or a combination of Lipiodol-bleomycin emulsion and NBCA-Lipiodol emulsion. Patients underwent serial clinical follow-up visits and follow-up CT or MRI examinations after TAE. Outcomes were compared between groups. RESULTS. Seventy-eight patients were enrolled. After exclusions, the analysis included 72 patients (15 men, 57 women; mean age, 35.0 years; 51 patients with hematuria, 66 patients with flank pain): 35 patients were randomized to treatment by PVA and 37 were randomized to treatment by a combination of Lipiodol-bleomycin emulsion and NBCA-Lipiodol emulsion. Complete occlusion of all angiographically visible arterial supply was achieved in all patients. No major adverse event occurred in any patient. The mean follow-up after TAE was 77 ± 45 (SD) months (range, 37-180 months). The frequency of resolution of hematuria after initial TAE without recurrence was greater after treatment by Lipiodol-bleomycin emulsion and NBCA-Lipiodol emulsion than by PVA (100.0% vs 80.0%, respectively; p = .03). At 12-month follow-up, the frequency of complete resolution of flank pain was higher after treatment by Lipiodol-bleomycin emulsion and NBCA-Lipiodol emulsion than by PVA (100.0% vs 75.0%, p = .03). Mean reduction in AML volume at 36 months or longer after TAE versus at baseline was greater in patients treated by Lipiodol-bleomycin emulsion and NBCA-Lipiodol emulsion than in those treated by PVA (98.0% vs 85.7%, respectively; p = .04). The frequency of complete response by modified RECIST (mRECIST) criteria at 36 months or longer after TAE was greater in patients treated by Lipiodol-bleomycin emulsion and NBCA-Lipiodol emulsion than by PVA (94.6% vs 74.3%, p = .04). The rate of repeat TAE was higher among patients treated by PVA than among those treated by Lipiodol-bleomycin emulsion and NBCA-Lipiodol emulsion (25.7% vs 8.1%, p = .04). CONCLUSION. Superior outcomes after TAE of AML were achieved using Lipiodol-bleomycin emulsion and NBCA-Lipiodol emulsion than using PVA. CLINICAL IMPACT. TAE using a combination of Lipiodol-bleomycin emulsion and NBCA-Lipiodol emulsion is a safe and effective treatment option for large or symptomatic AMLs. TRIAL REGISTRATION. Chinese Clinical Trial Registry ChiCTR2100053296.

A Redox-Activatable and Targeted Photosensitizing Agent to Deliver Doxorubicin for Combining Chemotherapy and Photodynamic Therapy.

Currently, tumors have become a serious disease threatening human health and life in modern society. Photo-chemo combination therapy is considered to be an important method to improving the efficiency of tumor treatment, especially in the treatment of multi-drug-resistant tumors. However, the application of photo-chemo combination therapy has been limited by the poor water solubility of photosensitizers, low tumor targeting, and high side effects of chemotherapy drugs. In order to solve these problems, a smart nano drug delivery platform FA-PEG-ss-PLL(-g-Ce6) designed and synthesized by us. The smart nano drug carrier uses folic acid (FA) as the targeting group, polyethylene glycol (PEG) as the hydrophilic end, Ce6-grafted polylysine (PLL(-g-Ce6)) as the hydrophobic end, and Chlorin e6 (Ce6) as the photosensitizer of photodynamic therapy, and it connects PEG to PLL by a redox-responsive cleavable disulfide linker (-ss-). Finally, the combination of tumor chemotherapy and photodynamic therapy (PDT) is realized by loading with anticancer drug doxorubicin (DOX) to the intelligent carrier. In vitro experiments showed that the drug loading content (DLC%) of DOX@FA-PEG-ss-PLL(-g-Ce6) nanoparticles (DOX@FPLC NPs) was as high as 14.83%, and the nanoparticles had good serum stability, reduction sensitivity and hemocompatibility. From the cytotoxicity assays in vitro, we found that under 664 nm laser irradiation DOX@FPLC NPs showed stronger toxicity to MCF-7 cells than did DOX, Ce6 + laser, and DOX + Ce6 + laser. Moreover, the antitumor efficiency in vivo and histopathological analysis showed that DOX@FPLC NPs under 664 nm laser irradiation exhibited higher antitumor activity and lower systemic toxicity than single chemotherapy. These results suggested that the FA-PEG-ss-PLL(-g-Ce6) nano drug delivery platform has considerable potential for the combination of chemotherapy and PDT.

Long-term outcomes of transarterial embolization with lipiodol-bleomycin emulsion plus polyvinyl alcohol particles versus the particles alone for large symptomatic focal nodular hyperplasia: a propensity score-matched analysis.

OBJECTIVES: To compare the efficacy of transarterial embolization (TAE) with polyvinyl alcohol (PVA) particles alone and lipiodol-bleomycin emulsion (LBE) plus PVA particles for patients with unresectable large symptomatic focal nodular hyperplasia (FNH). METHODS: We performed a retrospective analysis of patients who underwent TAE either with PVA particles alone (group A, n = 46) or LBE plus PVA particles (group B, n = 35) for large (≥ 7 cm) symptomatic FNH between January 2002 and February 2019. Propensity score matching (PSM) (1:1) was performed to adjust for potential baseline confounders. Technical success, adverse events (AEs), symptom relief, and changes in the lesion size after TAE were evaluated. Statistical analysis included Wilcoxon rank sum test and χ2 test. RESULTS: After PSM, no significant differences in baseline characteristics were found between the groups (31 in group A and 31 in group B, with a mean age of 31 years). Technical success was achieved in all patients (100%), without major AEs in both groups. Complete resolution of the abdominal symptoms was reported in 77.4% in group A and 100% in group B (p = 0.037) during a mean follow-up period of 72 months; complete resolution (CR) of the FNH rate was significantly higher in group B than in group A (93.6% vs. 67.7%; p = 0.019). CONCLUSION: Compared with the use PVA particles alone, TAE with LBE plus PVA particles in the treatment of patients with large symptomatic FNH had a significantly higher rates of CR of the FNH and complete relief of the symptoms. KEY POINTS: • Transarterial embolization (TAE) with lipiodol-bleomycin emulsion (LBE) plus PVA particles for the large symptomatic FNH yielded better results than with PVA particles alone, in terms of complete resolution of FNH lesions (93.6% vs 67.7%) and complete relief of the abdominal symptoms (100% vs 77.4%) during a mean follow-up period of 72 months (38-170 months). • No major complications were recorded in both groups, and no significant difference in the incidence of postembolization syndrome were observed between the two groups.

A controllable staining colorimetric method based on carboxylated cellulose membranes for early-warning and semi-quantitative detection of aflatoxins in water.

The group specific assay of total aflatoxins (AFs) often requires specific antibodies. A controllable staining colorimetric method was proposed to determine AFs by exploiting controllable electrostatic-staining of carboxylated cellulose membranes (CCMs) with Hg2+-capped gold nanoparticles (AuNPs). Under electrostatic force, Hg2+ connects AuNPs and CCMs like a bridge, causing CCMs to be stained by AuNPs. The two adjacent carbonyl groups in the AF structure can chelate Hg2+. When AFs are present, Hg2+ and AFs will form complexes, which reduces the attachment of AuNPs on the CCMs. Therefore, the different degrees of electrostatic-staining of CCMs show different color changes. Based on this phenomenon, a naked-eye colorimetric detection assay of AFs was designed. The visual limit of detection (VLOD) reached 10 ppb, which makes it easily and effectively complete the early-warning and semi-quantitative detection of AFs. To our knowledge, this is the first method for colorimetric detection of AFs based on the controllable electrostatic-staining mechanism, which can be used for the determination of AFs in actual water samples such as beer and beverages. Besides, the colorimetric sensing method based on the controllable electrostatic-staining mechanism provides a novel methodology for early-warning and semi-quantitative detection of toxic and hazardous substances.

Differential effects of PEGylated Cd-free CuInS2/ZnS quantum dot (QDs) on substance P and LL-37 induced human mast cell activation.

CuInS2/ZnS-PEG quantum dots (QDs) are among the most widely used near infrared non-cadmium QDs and are favored because of their non-cadmium content and strong tissue penetration. However, with their increasing use, there is great concern about whether exposure to QDs is potentially risky to the environment and humans. Furthermore, toxicological data related to CuInS2/ZnS-PEG QDs are scarce. In the study, we found that CuInS2/ZnS-PEG QDs (0-100 µg/mL) could internalize into human LAD2 mast cells without affecting their survival rate, nor did it cause degranulation or release of IL-8 and TNF-α. However, CuInS2/ZnS-PEG QDs significantly inhibited Substance P (SP) and LL-37-induced degranulation and chemotaxis of LAD2 cells by inhibiting calcium mobilization. Lower concentrations of CuInS2/ZnS-PEG QDs promoted the release of TNF-α and IL-8 stimulated by SP, but higher concentrations of CuInS2/ZnS-PEG QDs significantly inhibited the release of TNF-α and IL-8. On the other hand, CuInS2/ZnS-PEG QDs promoted LL-37-mediated TNF-α release from LAD2 cells in a dose-dependent manner from 6.25 to 100 µg/mL, while release of IL-8 triggered by LL-37 was dose-dependently inhibited within a dose concentration of 12.5-100 µg/mL. Collectively, our data demonstrated that CuInS2/ZnS-PEG QDs differentially mediated human mast cell activation induced by SP and LL-37.

Molecular Origin of the Biologically Accelerated Mineralization of Hydroxyapatite on Bacterial Cellulose for More Robust Nanocomposites.

Biomineralization generates hierarchically structured minerals with vital biological functions in organisms. This strategy has been adopted to construct complex architectures to achieve similar functionalities, mostly under chemical environments mimicking biological components. The molecular origin of the biofacilitated mineralization process is elusive. Herein, we describe the mineralization of hydroxyapatite (HAp) accompanying the biological secretion of nanocellulose by Acetobacter xylinum. In comparison with mature cellulose, the newly biosynthesized cellulose molecules greatly accelerate the nucleation rate and facilitate the uniform distribution of HAp crystals, thereby generating composites with a higher Young modulus. Both simulations and experiments indicate that the biological metabolism condition allows the easier capture of calcium ions by the more abundant hydroxyl groups on the glucan chain before the formation of hydrogen bonding, for the subsequent growth of HAp crystals. Our work provides more insights into the biologically accelerated mineralization process and presents a different methodology for the generation of biomimetic nanocomposites.

Integrated Degradome and Srna Sequencing Revealed miRNA-mRNA Regulatory Networks between the Phloem and Developing Xylem of Poplar.

Lignin and cellulose are the most abundant natural organic polymers in nature. MiRNAs are a class of regulatory RNAs discovered in mammals, plants, viruses, and bacteria. Studies have shown that miRNAs play a role in lignin and cellulose biosynthesis by targeting key enzymes. However, the specific miRNAs functioning in the phloem and developing xylem of Populus deltoides are still unknown. In this study, a total of 134 miRNAs were identified via high-throughput small RNA sequencing, including 132 known and two novel miRNAs, six of which were only expressed in the phloem. A total of 58 differentially expressed miRNAs (DEmiRNAs) were identified between the developing xylem and the phloem. Among these miRNAs, 21 were significantly upregulated in the developing xylem in contrast to the phloem and 37 were significantly downregulated. A total of 2431 target genes of 134 miRNAs were obtained via high-throughput degradome sequencing. Most target genes of these miRNAs were transcription factors, including AP2, ARF, bHLH, bZIP, GRAS, GRF, MYB, NAC, TCP, and WRKY genes. Furthermore, 13 and nine miRNAs were involved in lignin and cellulose biosynthesis, respectively, and we validated the miRNAs via qRT-PCR. Our study explores these miRNAs and their regulatory networks in the phloem and developing xylem of P.deltoides and provides new insight into wood formation.

Molecular Dynamics Study on Properties of Hydration Layers above Polymer Antifouling Membranes.

Zwitterionic polymers as crucial antifouling materials exhibit excellent antifouling performance due to their strong hydration ability. The structure−property relationship at the molecular level still remains to be elucidated. In this work, the surface hydration ability of three antifouling polymer membranes grafting on polysiloxane membranes Poly(sulfobetaine methacrylate) (T4-SB), poly(3-(methacryloyloxy)propane-1-sulfonate) (T4-SP), and poly(2-(dimethylamino)ethyl methacrylate) (T4-DM) was investigated. An orderly packed, and tightly bound surface hydration layer above T4-SP and T4-SB antifouling membranes was found by means of analyzing the dipole orientation distribution, diffusion coefficient, and average residence time. To further understand the surface hydration ability of three antifouling membranes, the surface structure, density profile, roughness, and area percentage of hydrophilic surface combining electrostatic potential, RDFs, SDFs, and noncovalent interactions of three polymers' monomers were studied. It was concluded that the broadest distribution of electrostatic potential on the surface and the nature of anionic SO3- groups led to the following antifouling order of T4-SB > T4-SP > T4-DM. We hope that this work will gain some insight for the rational design and optimization of ecofriendly antifouling materials.

Nanoscale Three-Dimensional Imaging of Drug Distributions in Single Cells via Laser Desorption Post-Ionization Mass Spectrometry.

Exploring the three-dimensional (3D) drug distribution within a single cell at nanoscale resolution with mass spectrometry imaging (MSI) techniques is crucial in cellular biology, yet it remains a great challenge due to limited lateral resolution, detection sensitivities, and reconstruction problems. Herein, a microlensed fiber laser desorption post-ionization time-of-flight mass spectrometer (MLF-LDPI-TOFMS) was developed for the 3D imaging of two anticancer drugs within single cells at a 500 × 500 × 500 nm3 voxel resolution. Nanoscale desorption was obtained with a microlensed fiber (MLF), and a 157 nm post-ionization laser was introduced to enhance the ionization yield. Furthermore, a new type of alignment method for 3D reconstruction was developed on the basis of our embedded uniform circular polystyrene microspheres (PMs). Our findings demonstrate that this 3D imaging technique has the potential to provide information about the 3D distributions of specific molecules at the nanoscale level.

Absorbable Microplate Externally Suspending Bronchomalacia in Congenital Heart Disease Infant.

To evaluate the feasibility and efficacy of external suspension with absorbable poly-l-lactic acid material shaping microplates for infants with severe bronchomalacia and congenital heart disease. From November 2017 to January 2019, 11 continual patients with severe bronchomalacia and congenital heart disease underwent bronchial membrane external suspension together with cardiovascular surgery. An absorbable plate made with poly-l-lactic acid material was used as the shaping fixation material in all patients. Data included the details of the operation, and clinical results were collected. The mean age was 1.2 ± 1.0 years, and the mean weight was 7.7 ± 2.9 kg. The patients with cardiac malformations were operated on under low-temperature cardiopulmonary bypass (CPB) through median sternotomy. There were no in-hospital deaths. The CPB time, mechanical ventilation time, and length of intensive care unit stay were 123.9 ± 36.9 min, 20.7 ± 19.4 h, and 71.6 ± 54.9 h, respectively. Two patients underwent surgery through a left posterolateral incision without CPB. One was a double aortic arch repair, and the other was only bronchial membrane external suspension with prior IAA repair. No patients needed ECMO support. The mean follow-up time was 12.1 ± 5.6 months, and no patients were lost to follow-up. No cases of late death were noted, and no patients needed reoperation. According to the CT scans, no patients had bronchial restenosis. External bronchial membrane suspension with an absorbable poly-l-lactic acid material shaping plate, which had better histocompatibility, for infants with severe bronchomalacia and congenital heart disease was a safe and feasible procedure.

Synthetic Biomaterials from Metabolically Derived Synthons.

The utility of metabolic synthons as the building blocks for new biomaterials is based on the early application and success of hydroxy acid based polyesters as degradable sutures and controlled drug delivery matrices. The sheer number of potential monomers derived from the metabolome (e.g., lactic acid, dihydroxyacetone, glycerol, fumarate) gives rise to almost limitless biomaterial structural possibilities, functionality, and performance characteristics, as well as opportunities for the synthesis of new polymers. This review describes recent advances in new chemistries, as well as the inventive use of traditional chemistries, toward the design and synthesis of new polymers. Specific polymeric biomaterials can be prepared for use in varied medical applications (e.g., drug delivery, tissue engineering, wound repair, etc.) through judicious selection of the monomer and backbone linkage.

Impact of weather factors on hand, foot and mouth disease, and its role in short-term incidence trend forecast in Huainan City, Anhui Province.

Hand, foot, and mouth disease (HFMD) is one of the most common communicable diseases in China, and current climate change had been recognized as a significant contributor. Nevertheless, no reliable models have been put forward to predict the dynamics of HFMD cases based on short-term weather variations. The present study aimed to examine the association between weather factors and HFMD, and to explore the accuracy of seasonal auto-regressive integrated moving average (SARIMA) model with local weather conditions in forecasting HFMD. Weather and HFMD data from 2009 to 2014 in Huainan, China, were used. Poisson regression model combined with a distributed lag non-linear model (DLNM) was applied to examine the relationship between weather factors and HFMD. The forecasting model for HFMD was performed by using the SARIMA model. The results showed that temperature rise was significantly associated with an elevated risk of HFMD. Yet, no correlations between relative humidity, barometric pressure and rainfall, and HFMD were observed. SARIMA models with temperature variable fitted HFMD data better than the model without it (sR 2 increased, while the BIC decreased), and the SARIMA (0, 1, 1)(0, 1, 0)52 offered the best fit for HFMD data. In addition, compared with females and nursery children, males and scattered children may be more suitable for using SARIMA model to predict the number of HFMD cases and it has high precision. In conclusion, high temperature could increase the risk of contracting HFMD. SARIMA model with temperature variable can effectively improve its forecast accuracy, which can provide valuable information for the policy makers and public health to construct a best-fitting model and optimize HFMD prevention.

Synthesis and Characterization of Poly(glyceric Acid Carbonate): A Degradable Analogue of Poly(acrylic Acid).

The synthesis and characterization of a degradable version of poly(acrylic acid), poly(glyceric acid carbonate), are reported. Specifically, atactic and isotactic poly(benzyl glycidate carbonate)s are obtained via the ring-opening copolymerization of rac-/(R)-benzyl glycidate with CO2 using a bifunctional rac-/(S,S)-cobalt salen catalyst in high carbonate linkage selectivity (>99%) and polymer/cyclic carbonate selectivity (∼90%). Atactic poly(benzyl glycidate carbonate) is an amorphous material with a T(g) (glass transition temperature) of 44 °C, while its isotactic counterpart synthesized from enantiopure epoxide and catalyst is semicrystalline with a T(m) (melting temperature) = 87 °C. Hydrogenolysis of the resultant polymers affords the poly(glyceric acid carbonate). Poly(glyceric acid carbonate) exhibits an improved cell cytotoxicity profile compared to poly(acrylic acid). Poly(glyceric acid carbonate)s also degrade remarkably fast (t(1/2) ≈ 2 weeks) compared to poly(acrylic acid). Cross-linked hydrogels prepared from poly(glyceric acid carbonate) and poly(ethylene glycol) diaziridine show significant degradation in pH 8.4 aqueous buffer solution compared to similarly prepared hydrogels from poly(acrylic acid) and poly(ethylene glycol) diaziridine.

Recent advances in glycerol polymers: chemistry and biomedical applications.

Glycerol polymers are attracting increased attention due to the diversity of polymer compositions and architectures available. This article provides a brief chronological review on the current status of these polymers along with representative examples of their use for biomedical applications. First, the underlying chemistry of glycerol that provides access to a range of monomers for subsequent polymerizations is described. Then, the various synthetic methodologies to prepare glycerol-based polymers including polyethers, polycarbonates, polyesters, and so forth are reviewed. Next, several biomedical applications where glycerol polymers are being investigated including carriers for drug delivery, sealants or coatings for tissue repair, and agents possessing antibacterial activity are described. Fourth, the growing market opportunity for the use of polymers in medicine is described. Finally, the findings are concluded and summarized, as well as the potential opportunities for continued research efforts are discussed.

Development of surface molecular-imprinted electrochemical sensor for palmitic acid with machine learning assistance.

Palmitic acid (PA) is a kind of saturated high fatty acid, which is involved in physiological safety and food quality. A surface molecularly imprinted polymer (MIP) electrochemical sensor was prepared on MXene surface using dopamine (DA) as functional monomer. The electrode was modified with gold nanoparticles (AuNPs), ferrocene-graphene oxide-multiwalled carbon nanotubes (Fc-GO-MWCNT) composite to enhance the electroactive area and conductivity. The sensor was characterized by scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), electrochemical impedance spectroscopy (EIS) and Differential pulse voltammetry (DPV), respectively. The parameters concerning this assay and various regeneration conditions have been carefully studied. The sensor can detect PA in the range of 1 nM-1 mM (R2 = 0.995), the limit of detection (LOD) is 0.48 nM (S/N = 3), and the limit of quantification (LOQ) is 1.61 nM. The artificial neural network (ANN) model in machine learning is further used to analyze the data collected by the sensor. The results show that the back propagation (BP) neural network in ANN is more suitable for the intelligent analysis of PA. The practicality of the sensor was confirmed by detecting PA in pork samples. This is the first MIP-based electrochemical sensor for PA, and it has great potential in practical applications.

Fabrication of antimicrobial packaging based on polyaminopropyl biguanide incorporated pectin/polyvinyl alcohol films for fruit preservation.

Pectin (PEC)/polyvinyl alcohol (PVA), plasticizers, and polyaminopropyl biguanide (Pb) (0.125%-1%) were used to prepare the film solution. The results demonstrated significantly enhanced tensile strength and elongation at break of PEC/PVA/Pb 0.25% film than PEC/PVA film. Scanning electron microscopy was carried out to investigate the continuous and dense structure of the PEC/PVA/ Pb0.25% film. FTIR, XPS, and XRD revealed that Pb addition to the PEC/PVA film matrix changed its physicochemical properties by forming new hydrogen and CN bonds. Moreover, the composite films exhibited strong antimicrobial activity against food-borne microorganisms (E. coli and S. aureus), and post-harvest pathogens (P. italicum and F. proliferatum) in vitro. The composite film effectively inhibited P. italicum growth during citrus experiments, while maintaining nutritional components (vitamin C, total flavonoid, and total polyphenol content). Overall, the antimicrobial composite film presented promising applicability in food packaging.

Micromorphology reformation of regenerated cellulose nanofibers from corn (Zea Mays) stalk pith in urea solution with high-speed shear induced.

Nanocellulose is a kind of renewable natural polymer material with high specific surface area, high crystallinity, and strong mechanical properties. RC nanofibers (RCNFs) have attracted an increasing attention in various applications due to their high aspect ratio and good flexibility. Herein, a novel and facile strategy for RCNFs preparation with high-speed shear induced in urea solution through "bottom-up" approach was proposed in this work. Results indicated that the average diameter and yield of RCNF was approach to 136.67 nm and 53.3 %, respectively. Meanwhile, due to the regular orientation RC chains and arrangement micro-morphology, RCNFs exhibited high crystallinity, strong mechanical properties, stable thermal degradation performance, and excellent UV resistance. In this study, a novel regeneration process with high-speed shear induced was developed to produce RCNFs with excellent properties. This study paved a strategy for future low-energy production of nanofibers and high value-added conversion applications of agricultural waste.