Mechanical force induces macrophage-derived exosomal UCHL3 promoting bone marrow mesenchymal stem cell osteogenesis by targeting SMAD1.

BACKGROUND: Orthodontic tooth movement (OTM), a process of alveolar bone remodelling, is induced by mechanical force and regulated by local inflammation. Bone marrow-derived mesenchymal stem cells (BMSCs) play a fundamental role in osteogenesis during OTM. Macrophages are mechanosensitive cells that can regulate local inflammatory microenvironment and promote BMSCs osteogenesis by secreting diverse mediators. However, whether and how mechanical force regulates osteogenesis during OTM via macrophage-derived exosomes remains elusive. RESULTS: Mechanical stimulation (MS) promoted bone marrow-derived macrophage (BMDM)-mediated BMSCs osteogenesis. Importantly, when exosomes from mechanically stimulated BMDMs (MS-BMDM-EXOs) were blocked, the pro-osteogenic effect was suppressed. Additionally, compared with exosomes derived from BMDMs (BMDM-EXOs), MS-BMDM-EXOs exhibited a stronger ability to enhance BMSCs osteogenesis. At in vivo, mechanical force-induced alveolar bone formation was impaired during OTM when exosomes were blocked, and MS-BMDM-EXOs were more effective in promoting alveolar bone formation than BMDM-EXOs. Further proteomic analysis revealed that ubiquitin carboxyl-terminal hydrolase isozyme L3 (UCHL3) was enriched in MS-BMDM-EXOs compared with BMDM-EXOs. We went on to show that BMSCs osteogenesis and mechanical force-induced bone formation were impaired when UCHL3 was inhibited. Furthermore, mothers against decapentaplegic homologue 1 (SMAD1) was identified as the target protein of UCHL3. At the mechanistic level, we showed that SMAD1 interacted with UCHL3 in BMSCs and was downregulated when UCHL3 was suppressed. Consistently, overexpression of SMAD1 rescued the adverse effect of inhibiting UCHL3 on BMSCs osteogenesis. CONCLUSIONS: This study suggests that mechanical force-induced macrophage-derived exosomal UCHL3 promotes BMSCs osteogenesis by targeting SMAD1, thereby promoting alveolar bone formation during OTM.

Evaluating the accuracy of automated cephalometric analysis based on artificial intelligence.

BACKGROUND: The purpose of this study was to evaluate the accuracy of automatic cephalometric landmark localization and measurements using cephalometric analysis via artificial intelligence (AI) compared with computer-assisted manual analysis. METHODS: Reconstructed lateral cephalograms (RLCs) from cone-beam computed tomography (CBCT) in 85 patients were selected. Computer-assisted manual analysis (Dolphin Imaging 11.9) and AI automatic analysis (Planmeca Romexis 6.2) were used to locate 19 landmarks and obtain 23 measurements. Mean radial error (MRE) and successful detection rate (SDR) values were calculated to assess the accuracy of automatic landmark digitization. Paired t tests and Bland‒Altman plots were used to compare the differences and consistencies in cephalometric measurements between manual and automatic analysis programs. RESULTS: The MRE for 19 cephalometric landmarks was 2.07 ± 1.35 mm with the automatic program. The average SDR within 1 mm, 2 mm, 2.5 mm, 3 and 4 mm were 18.82%, 58.58%, 71.70%, 82.04% and 91.39%, respectively. Soft tissue landmarks (1.54 ± 0.85 mm) had the most consistency, while dental landmarks (2.37 ± 1.55 mm) had the most variation. In total, 15 out of 23 measurements were within the clinically acceptable level of accuracy, 2 mm or 2°. The rates of consistency within the 95% limits of agreement were all above 90% for all measurement parameters. CONCLUSION: Automatic analysis software collects cephalometric measurements almost effectively enough to be acceptable in clinical work. Nevertheless, automatic cephalometry is not capable of completely replacing manual tracing. Additional manual supervision and adjustment for automatic programs can increase accuracy and efficiency.

Dynamic Change in Oral Microbiota of Children With Cleft Lip and Palate After Alveolar Bone Grafting.

To investigate the longitudinal influence of alveolar bone grafting on the oral microbiota of children with cleft lip and palate (CLP).Twenty-eight children with nonsyndromic CLP were recruited and underwent secondary alveolar bone grafting at the first time. Unstimulated saliva and plaque samples were collected from the subjects preoperatively and at 2 days, 1 month, and 3 months postoperatively. The v3-v4 hypervariable regions of the 16S rRNA gene from bacterial DNA were sequenced using the Illumina MiSeq sequencing platform.The alpha diversity of the saliva and plaque microbiota was significantly decreased at 2 days postoperatively and then increased at 1 and 3 months postoperatively. The saliva and plaque microbiota compositions at 2 days postoperatively differed from those at the other time points, and the microbiota compositions at 1 and 3 months postoperatively showed a gradual shift toward the preoperative composition. The saliva, but not plaque, microbiota composition 3 months postoperatively was similar to that preoperatively.The effect of secondary alveolar bone grafting on the plaque microbiota in children with CLP lasted longer than the saliva microbiota. Alveolar bone grafting altered the saliva microbiota in children with CLP within 3 months postoperatively.

Odor-producing response pattern by four typical freshwater algae under stress: Acute microplastic exposure as an example.

Algae-induced odor problems in water have been repeatedly occurred concerns for drinking water quality. However, present researches mostly focus on the odor-producing pattern of algae in normal growth, and there is scarce discussion on those under stress. Microplastics (MPs) pollution have been global concern for their negative ecological impacts and frequently co-occurs with odor-producing algal bloom in freshwaters. Thus, this study aimed to elucidate the effects and mechanisms of MPs as an environmental stress on algal odorant production for good illustration of odor-producing response pattern under stress. Variation in MP size (polystyrene microspheres; 100 nm, 1000 nm and 10 µm) had significant effects on odorant formation (ß-cycloidal, 2-methylisopropanol, 2,4-heptandienal and 2,4-decadienal) by four freshwater algae (Microcystis aeruginosa, Pseudanabaena sp., Cyclotella meneghiniana and Melosira varians). The size ratio of MPs over cells (SRMC) was proposed to categorize the size-ratio dependent effects on the algal odorant production. Interestingly, when SRMC was in the range of 0.1-1, there were always promoting effects; when SRMC < 0.1 or SRMC > 1, there exhibited inhibiting effects, and the inhibiting effects of SRMC < 0.1 were far more severe than those of SRMC > 1. The promotion on odorant production in the SRMC range of 0.1-1 was mainly attributed to the increase in cellular yield, which was related to the increased odorant precursors derived from the oxidation products of reactive oxygen species (ROS). Alternatively, the inhibition of odorant production caused by MPs with SRMC < 0.1 was the results of simultaneously inhibiting cellular density and cellular yield, which might be attributed to the cellular internalization of MPs, inducing the extensive toxic effects. This study illustrated the possibilities of MPs in impairing the esthetics of the source water and provided guidance for the future algal odor issues under stress.

A spatially varying charge model for regulating site-selective protein adsorption and cell behaviors.

Implanted materials that enter the body first interact with proteins in body fluids, and cells then perceive and respond to the foreign implant through this layer of adsorbed proteins. Thus, spatially specific regulation of protein adsorption on an implant surface is pivotal for mediating subsequent cellular behaviors. Unlike the surface modulation strategy for traditional biomaterials, in this research, materials with a nonuniform spatial distribution of surface charges were designed to achieve site-selective protein adsorption and further influence cell behavior by charge regulation. Spatially varying microdomains with different levels of piezoelectricity were generated via a focus laser beam-induced phase transition. In addition, after polarization, the zones with different levels of piezoelectricity showed significant differences in surface charge density. The results of scanning Kelvin probe force microscopy (SKPM) showed that the surface charge on the material exhibits a nonuniform spatial distribution after laser irradiation and polarization. Site-specific charge-mediated selective protein adsorption was demonstrated through a protein adsorption experiment. Cell behavior analysis showed that the increase in charge density was conducive to promoting cell adhesion and the formation of filopodia while the nonuniform spatial distribution of charge promoted an oriented arrangement of cells; both features accelerated cell migration. This study provides a new method for spatially regulating protein adsorption through surface charges to further influence cell behaviors.

Elastomeric conductive hybrid hydrogels with continuous conductive networks.

Elastomeric conductive hybrid hydrogels (ECHs) combining conducting polymers with elastomeric hydrogels have recently attracted interest due to their wide range of applications in bioelectronics such as wearable or implantable sensing devices. However, the conductivity of ECHs is typically compromised when conductive polymers are used as fillers in hydrogel networks because the inherent limitations of ECHs severely restrict their applicability. Here, we significantly improved the electrical conductivity of ECHs by using a bioinspired catechol derivative, dopamine (DA), as the dopant and mediator for the in situ polymerization of conducting polypyrrole (PPy) within the elastomeric hydrogel dual-networks. In general, ECHs prepared by conventional methods tend to form separate island structures of conductive polymers dispersed within porous hydrogel matrices. We found that a continuous conductive PPy network prepared using the DA mediator facilitated fast electron transfer within the ECHs, which showed good elastomeric mechanical properties, excellent biocompatibility and high force- or strain-responsiveness suitable for implantable strain-sensing applications.

Pilot investigation on formation of 2,4,6-trichloroanisole via microbial O-methylation of 2,4,6-trichlorophenol in drinking water distribution system: An insight into microbial mechanism.

Taste & odor (T&O) problems in drinking water are always complained by customers. Recent studies have indicated biofilms in drinking water distribution system (DWDS) are always ignored as potential sources of T&O compounds. In this paper, the formation of 2,4,6-trichloroanisole (2,4,6-TCA), one of the dominant T&O compounds, was investigated in a pilot-scale DWDS. The addition of precursor 2,4,6-trichlorophenol (2,4,6-TCP) of 0.2 mg/L induced the formation of 2,4,6-TCA with a maximum yield of ∼400 ng/L, and the formation kinetics can be described by a pseudo-first-order kinetic model. Effects of water distribution factors such as pipe material, temperature, flow velocity, and residual chlorine on the formation of 2,4,6-TCA were evaluated, and the pipe material was found to have the most remarkable effect. Ductile iron and stainless steel pipes produced much more 2,4,6-TCA than polyethylene (PE) pipe. The biofilm microbial communities on the three types of pipe walls were then comprehensively analyzed by heterotrophic plate count and 16S rRNA/ITS1 genes high throughput sequencing. The links between the 2,4,6-TCA formation potential and the microbial activity in genus and enzymatic levels in DWDS have been revealed for the first time. According to the characteristics of microbial assemblages of producing 2,4,6-TCA, quorum-sensing (QS) bacterial signaling system and extracellular DNA (eDNA) may be two promising targets for biofilm treatment and 2,4,6-TCA control in DWDS.