The elicitor VP2 from Verticillium dahliae triggers defence response in cotton.

Verticillium dahliae is a widespread and destructive soilborne vascular pathogenic fungus that causes serious diseases in dicot plants. Here, comparative transcriptome analysis showed that the number of genes upregulated in defoliating pathotype V991 was significantly higher than in the non-defoliating pathotype 1cd3-2 during the early response of cotton. Combined with analysis of the secretome during the V991-cotton interaction, an elicitor VP2 was identified, which was highly upregulated at the early stage of V991 invasion, but was barely expressed during the 1cd3-2-cotton interaction. Full-length VP2 could induce cell death in several plant species, and which was dependent on NbBAK1 but not on NbSOBIR1 in N. benthamiana. Knock-out of VP2 attenuated the pathogenicity of V991. Furthermore, overexpression of VP2 in cotton enhanced resistance to V. dahliae without causing abnormal plant growth and development. Several genes involved in JA, SA and lignin synthesis were significantly upregulated in VP2-overexpressing cotton. The contents of JA, SA, and lignin were also significantly higher than in the wild-type control. In summary, the identified elicitor VP2, recognized by the receptor in the plant membrane, triggers the cotton immune response and enhances disease resistance.

Inhibition of soluble epoxide hydrolase enhances the dentin-pulp complex regeneration mediated by crosstalk between vascular endothelial cells and dental pulp stem cells.

BACKGROUND: Revascularization and restoration of normal pulp-dentin complex are important for tissue-engineered pulp regeneration. Recently, a unique periodontal tip-like endothelial cells subtype (POTCs) specialized to dentinogenesis was identified. We have confirmed that TPPU, a soluble epoxide hydrolase (sEH) inhibitor targeting epoxyeicosatrienoic acids (EETs) metabolism, promotes bone growth and regeneration by angiogenesis and osteogenesis coupling. We hypothesized that TPPU could also promote revascularization and induce POTCs to contribute to pulp-dentin complex regeneration. Here, we in vitro and in vivo characterized the potential effect of TPPU on the coupling of angiogenesis and odontogenesis and investigated the relevant mechanism, providing new ideas for pulp-dentin regeneration by targeting sEH. METHODS: In vitro effects of TPPU on the proliferation, migration, and angiogenesis of dental pulp stem cells (DPSCs), human umbilical vein endothelial cells (HUVECs) and cocultured DPSCs and HUVECs were detected using cell counting kit 8 (CCK8) assay, wound healing, transwell, tube formation and RT-qPCR. In vivo, Matrigel plug assay was performed to outline the roles of TPPU in revascularization and survival of grafts. Then we characterized the VEGFR2 + POTCs around odontoblast layer in the molar of pups from C57BL/6 female mice gavaged with TPPU. Finally, the root segments with DPSCs mixed with Matrigel were implanted subcutaneously in BALB/c nude mice treated with TPPU and the root grafts were isolated for histological staining. RESULTS: In vitro, TPPU significantly promoted the migration and tube formation capability of cocultured DPSCs and HUVECs. ALP and ARS staining and RT-qPCR showed that TPPU promoted the osteogenic and odontogenic differentiation of cultured cells, treatment with an anti-TGF-ß blocking antibody abrogated this effect. Knockdown of HIF-1α in HUVECs significantly reversed the effect of TPPU on the expression of angiogenesis, osteogenesis and odontogenesis-related genes in cocultured cells. Matrigel plug assay showed that TPPU increased VEGF/VEGFR2-expressed cells in transplanted grafts. TPPU contributed to angiogenic-odontogenic coupling featured by increased VEGFR2 + POTCs and odontoblast maturation during early dentinogenesis in molar of newborn pups from C57BL/6 female mice gavaged with TPPU. TPPU induced more dental pulp-like tissue with more vessels and collagen fibers in transplanted root segment. CONCLUSIONS: TPPU promotes revascularization of dental pulp regeneration by enhancing migration and angiogenesis of HUVECs, and improves odontogenic differentiation of DPSCs by TGF-ß. TPPU boosts the angiogenic-odontogenic coupling by enhancing VEGFR2 + POTCs meditated odontoblast maturation partly via upregulating HIF-1α, which contributes to increasing pulp-dentin complex for tissue-engineered pulp regeneration.

Annexin A1 protects periodontal ligament cells against lipopolysaccharide-induced inflammatory response and cellular senescence: An implication in periodontitis.

Periodontitis is an inflammatory condition that affects the tooth-supporting structures, triggered by the host's immune response toward the bacterial deposits around the teeth. Annexin A1 (AnxA1), a vital member of the annexin superfamily, is known for its diverse physiological functions, particularly its anti-inflammatory and anti-senescence properties. We hypothesized that AnxA1 has a protective effect against lipopolysaccharide (LPS)-induced inflammatory responses and cellular damage in periodontal ligament cells (PDLCs). In this study, we demonstrate that LPS stimulation significantly reduced telomerase activity in PDLCs, a decline that was dose-dependently reversed by AnxA1. Importantly, AnxA1 protected the cells from LPS-induced cellular senescence and the downregulation of human telomerase reverse transcriptase (hTERT) expression. In line with this, AnxA1 suppressed the LPS-induced expression of p21 and p16 at both the mRNA and protein levels. Furthermore, AnxA1 demonstrated potent anti-inflammatory effects by inhibiting the secretion of interleukin 6 (IL-6), interleukin 8 (IL-8), and monocyte chemoattractant protein-1 (MCP-1). It also mitigated LPS-induced oxidative stress by reducing the levels of phosphorylated Foxo3a (Ser253) and restored sirtuin 1 (SIRT1) expression. Notably, SIRT1 silencing abolished AnxA1's protective effects on Foxo3a phosphorylation and cellular senescence, suggesting that SIRT1 mediates AnxA1's actions. In conclusion, AnxA1 protected PDLCs against LPS-triggered inflammation and cell senescence by activating SIRT1 signal pathway. These findings indicate that AnxA1 could serve as a promising therapeutic strategy for the treatment of periodontitis.

BRAF V600E mutation mediates invasive and growth features in ameloblastoma.

OBJECTIVES: Ameloblastoma (AM), a locally aggressive tumor with extensive growth capacity, causes significant damage to the jaw and affects facial appearance. Although the high prevalence of BRAF V600E mutation in AM is known, its specific impacts on patients with AM remain unclear. Thus, the present study investigated the role of BRAF V600E mutation, thereby focusing on its impact on AM invasion and growth. MATERIALS AND METHODS: Immunohistochemical analysis was used to compare BRAF V600E, MMP2, MMP9, and Ki-67 expressions in AM (n = 49), normal oral mucosa (NOM) (n = 10), and odontogenic keratocyst (OKC) (n = 15) tissues. AM was further classified according to the presence or absence of BRAF V600E. The relationship between BRAF V600E and invasion as well as growth was evaluated. In addition, correlation analysis was performed using immunohistochemistry and confirmed via double-labeling immunofluorescence. Finally, comparative analyses using mass spectrometry, immunohistochemistry, and immunofluorescence were performed to explore and identify underlying mechanisms. RESULTS: AM exhibited a higher incidence of BRAF V600E mutation than NOM and OKC. BRAF V600E expression was positively correlated with the invasion-associated proteins MMP2 and MMP9 and the growth-related protein Ki-67. Proteomic data revealed that BRAF V600E primarily activates the MAPK signaling pathway in AM, particularly driving the phosphorylation of extracellular signal-regulated kinase 1/2 (ERK1/2). CONCLUSIONS: In summary, the findings suggested that the BRAF V600E mutation enhances the invasion and growth abilities of AM via the MAPK/ERK signaling pathway. Thus, targeting BRAF V600E or the MAPK/ERK pathway may be a potential AM therapy.

Molecular Insights into the Enhanced Activity and/or Thermostability of PET Hydrolase by D186 Mutations.

PETase exhibits a high degradation activity for polyethylene terephthalate (PET) plastic under moderate temperatures. However, the effect of non-active site residues in the second shell of PETase on the catalytic performance remains unclear. Herein, we proposed a crystal structure- and sequence-based strategy to identify the key non-active site residue. D186 in the second shell of PETase was found to be capable of modulating the enzyme activity and stability. The most active PETaseD186N improved both the activity and thermostability with an increase in Tm by 8.89 °C. The PET degradation product concentrations were 1.86 and 3.69 times higher than those obtained with PETaseWT at 30 and 40 °C, respectively. The most stable PETaseD186V showed an increase in Tm of 12.91 °C over PETaseWT. Molecular dynamics (MD) simulations revealed that the D186 mutations could elevate the substrate binding free energy and change substrate binding mode, and/or rigidify the flexible Loop 10, and lock Loop 10 and Helix 6 by hydrogen bonding, leading to the enhanced activity and/or thermostability of PETase variants. This work unraveled the contribution of the key second-shell residue in PETase in influencing the enzyme activity and stability, which would benefit in the rational design of efficient and thermostable PETase.

Simultaneous Detection of Two Extracellular Vesicle Subpopulations in Saliva Assisting Tumor T Staging of Oral Squamous Cell Carcinoma.

Extracellular vesicles (EVs), acting as important mediators of intercellular communication, play an essential role in physiological processes, which have unique potential in the medical field. However, the heterogeneity of EVs limits their development for disease diagnosis and therapy, making the EV subpopulation analysis extremely valuable. In this article, a simple microfluidic approach was presented for the on-chip specific isolation and detection of two phenotypes of EVs (Annexin V+ EGFR+ EVs and Annexin V- EGFR+ EVs) based on different biomolecule-modified magnetic nanospheres and a fluorescence labeling technique. Combined with the control of the magnetic field in the microzone and fluid flow, it was easy to form two separate functional regions in the chip to capture different EV subpopulations. This method was successfully applied to the tests of clinical saliva samples in 75 oral squamous cell carcinoma (OSCC) patients and 10 healthy people. The results showed that the total level of EGFR+ EVs was much higher in OSCC patients that in healthy people. Meantime, the ratio of Annexin V+ EGFR+ EVs to Annexin V- EGFR+ EVs was found to be negatively correlated with tumor T stage of OSCC patients with a statistical difference, which suggested the ratio as a clinical index for monitoring the progression of OSCC in real time based on a noninvasive method. The approach provided a novel idea for evaluating the tumor T stage of OSCC and a powerful tool for clinical application.

Computation-Based Design of Salt Bridges in PETase for Enhanced Thermostability and Performance for PET Degradation.

Polyethylene terephthalate (PET) is one of the most widely used plastics, and the accumulation of PET poses a great threat to the environment. IsPETase can degrade PET rapidly at moderate temperatures, but its application is greatly limited by the low stability. Herein, molecular dynamics (MD) simulations combined with a sequence alignment strategy were adopted to introduce salt bridges into the flexible region of IsPETase to improve its thermal stability. In the designed variants, the Tm values of IsPETaseI168R/S188D and IsPETaseI168R/S188E were 7.4 and 8.7 °C higher than that of the wild type, respectively. The release of products degraded by IsPETaseI168R/S188E was 4.3 times that of the wild type. Tertiary structure characterization demonstrated that the structure of the variants IsPETaseI168R/S188D and IsPETaseI168R/S188E became more compact. Extensive MD simulations verified that a stable salt bridge was formed between the residue R168 and D186 in IsPETaseI168R/S188D , while in IsPETaseI168R/S188E an R168-D186-E188 salt bridge network was observed. These results confirmed that the proposed computation-based salt bridge design strategy could efficiently generate variants with enhanced thermal stability for the long-term degradation of PET, which would be helpful for the design of enzymes with improved stability.

Stability of mpox virus on different commonly contacted surfaces.

Mpox is still spreading globally and is mostly reported to be transmitted by skin and mucosal contact. However, transmission through contact with fomites, contaminated objects, or surfaces has been reported in general population. Evaluation of the stability of mpox virus (MPXV) on different surfaces is important to minimize mpox transmission. In the study, the stability of MPXV on different kinds of commonly contacted surfaces was determined. MPXV was observed to have a surface-dependent stability pattern. Viable virus was detected on both glass and stainless steel for up to 5 days, and on plastic surfaces for up to 3 days. In contrast, no viable MPXV was detected on wooden board and cardboard, which are porous and water-absorbent surfaces, after 1 and 2 days of incubation, respectively. In addition, MPXV nucleic acids were more stable and showed better correlation with viral titers on stainless steel, plastic, and glass. The results indicate that fomite transmission of MPXV is plausible. Moreover, the stability of MPXV was highly surface-dependent and more stable on smooth surfaces, which could provide more information for minimizing the transmission of mpox and emphasize the significance of environmental disinfection in mpox prevention and control.

Phosphorylcholine/Heparin Composite Coatings on Artificial Lung Membrane for Enhanced Hemo-compatibility.

As the key component of extracorporeal membrane oxygenation (ECMO), artificial lung membranes have low gas permeability and plasma leakage problems, and the contact between membrane materials and blood can cause coagulation, leading to the blockage of medical equipment and seriously threatening the safety of human life. In our work, poly(4-methyl-1-pentene) hollow fiber membranes (PMP HFMs) were prepared by the thermally induced phase separation (TIPS) method, the redox method was adopted for the surface hydroxylation of PMP HFMs, and then, heparin (Hep) and 2-(methacryloyloxy)ethyl(2-(trimethylammonio)ethyl) phosphate (MPC) were grafted to the surface of PMP HFMs to prepare anticoagulant coatings. The gas permeability and hemo-compatibility of the coatings were investigated by various characterization methods, such as gas flow meter, scanning electron microscope, extracorporeal circulation experiment, etc. The results show that PMP HFMs possess a bicontinuous pore structure with a dense surface layer, which could maintain good gas permeability with an oxygen permeance of 0.8 mL/bar·cm2·min and stable gas selectivity. Furthermore, the whole blood circulation of rabbit indicated that a composite surface of bioactive Hep and biopassive MPC might be used as artificial lung membranes without the formation of thrombosis within 21 days.

Impact of Primary Container Closure System on PS80 Oxidation and the Mechanistic Understanding.

PURPOSE: Polysorbate oxidation can potentially lead to protein degradation and loss of potency, which has been a challenge for the pharmaceutical industry for decades. Many factors have been reported to impact polysorbate oxidation rate, including types of elemental impurities, peroxide content, pH, light exposure, grades of polysorbate, etc. Even though there are many publications in this field, the impact of primary container closure system on PS80 oxidation has not been systematically studied or reported. The purpose of the current study is to close this gap. METHODS: Placebo PS80 formulations were prepared and filled into different container-closure systems (CCS), including different types of glass vials and polymer vials. Oleic acid content was monitored on stability as a surrogate value for PS80 content, which will decline upon oxidation. ICP-MS analysis and metal spiking studies were carried out to correlate the PS80 oxidation rate with metals leached from primary containers. RESULTS: PS80 degrades via oxidation at the fastest rate in glass vials with high coefficient of expansion (COE), followed by glass vials with low coefficient of expansion, while polymer vials minimized the oxidation of PS80 in most formulation conditions explored in this paper. ICP-MS analysis demonstrated that 1) 51 COE glass has more metal leachables than 33 COE glass in this study; and 2) More metal leachables correlates with faster PS80 oxidation. Metal spiking studies confirmed the hypothesis that aluminum and iron have a synergistic catalysis effect on PS80 oxidation. CONCLUSIONS: Primary containers of drug products play a significant role in the rate of PS80 oxidation. This study revealed a new major contributor to PS80 oxidation and potential mitigation strategy for biological drug products.

Assessment of ForenSeq mtDNA Whole Genome Kit for forensic application.

Mitochondrial DNA (mtDNA) is an indispensable genetic marker in forensic genetics. The emergence and development of massively parallel sequencing (MPS) makes it possible to obtain complete mitochondrial genome sequences more quickly and accurately. The study evaluated the advantages and limitations of the ForenSeq mtDNA Whole Genome Kit in the practical application of forensic genetics by detecting human genomic DNA standards and thirty-three case samples. We used control DNA with different amount to determine sensitivity of the assay. Even when the input DNA is as low as 2.5 pg, most of the mitochondrial genome sequences could still be covered. For the detection of buccal swabs and aged case samples (bloodstains, bones, teeth), most samples could achieve complete coverage of mitochondrial genome. However, when ancient samples and hair samples without hair follicles were sequenced by the kit, it failed to obtain sequence information. In general, the ForenSeq mtDNA Whole Genome Kit has certain applicability to forensic low template and degradation samples, and these results provide the data basis for subsequent forensic applications of the assay. The overall detection process and subsequent analysis are easy to standardize, and it has certain application potential in forensic cases.

Inhibiting Polyamide Intrusion of Thin Film Composite Membranes: Strategies and Environmental Implications.

Thin film composite polyamide (TFC) nanofiltration (NF) membranes represent extensive applications at the water-energy-environment nexus, which motivates unremitting efforts to explore membranes with higher performance. Intrusion of polyamide into substrate pores greatly restricts the overall membrane permeance because of the excessive hydraulic resistance, while the effective inhibition of intrusion remains technically challenging. Herein, we propose a synergetic regulation strategy of pore size and surface chemical composition of the substrate to optimize selective layer structure, achieving the inhibition of polyamide intrusion effective for the membrane separation performance enhancement. Although reducing the pore size of the substrate prevented polyamide intrusion at the intrapore, the membrane permeance was adversely affected due to the exacerbated "funnel effect". Optimizing the polyamide structure via surface chemical modification of the substrate, where reactive amino sites were in situ introduced by the ammonolysis of polyethersulfone substrate, allowed for maximum membrane permeance without reducing the substrate pore size. The optimal membrane exhibited excellent water permeance, ion selectivity, and emerging contaminants removal capability. The accurate optimization of selective layer is anticipated to provide a new avenue for the state-of-the-art membrane fabrication, which opens opportunities for promoting more efficient membrane-based water treatment applications.

Microporous Matrimid/PIM-1 Thin Film Composite Membranes with Narrow Pore Size Distribution used for Molecular Separation in Organic Solvents.

Polymers of intrinsic microporosity (PIMs) are a class of microporous organic materials that contain interconnected pores of less than 2 nm in diameter. Such materials are of great potential used in membranes for molecular separation, such as drug fractionation in pharmaceutical industry. However, the PIMs membranes are often susceptible to low separation selectivity toward different molecules due to their wide pore size distribution. Herein, a linear polyimide, Matrimid, is incorporated with PIM-1 (a typical member of PIMs) by solution blending, and the blends are dip-coated onto a polyimide P84 support membrane to prepare thin-film composite (TFC) membranes to control pore size distribution while keep high microporosity. The component miscibility, pore characteristics, and molecular separation performances of the Matrimid/PIM-1 TFC membranes are investigated in detail. The Matrimid and PIM-1 are partially miscible due to their similar Hansen solubility parameters. The Matrimid endows the selective layers (coatings) with narrower pore size distribution due to more compact chain packing. The prepared Matrimid/PIM-1 TFC membranes show high selectivity for separation of riboflavin (80% of retention) and isatin (only 5% of retention). The developed membranes exhibit great potential for separating molecules with different molecular weights.

Gut microbiota enhance energy accumulation of black-necked crane to cope with impending migration.

Less is known about the role of gut microbiota in overwintering environmental adaptation in migratory birds. Here, we performed metagenomic sequencing on fresh fecal samples (n = 24) collected during 4 periods of overwintering (Dec: early; Jan: middle I; Feb: middle II; Mar: late) to characterize gut microbial taxonomic and functional characteristics of black-necked crane (Grus nigricollis). The results demonstrated no significant change in microbial diversity among overwintering periods. Analysis of compositions of microbiomes with bias correction (ANCOM-BC) determined 15 Proteobacteria species enriched in late overwintering period. Based on previous reports, these species are associated with degradation of chitin, cellulose, and lipids. Meanwhile, fatty acid degradation and betalain biosynthesis pathways are enriched in late overwintering period. Furthermore, metagenomic binning obtained 91 high-quality bins (completeness >70% and contamination <10%), 5 of which enriched in late overwintering period. Carnobacterium maltaromaticum, unknown Enterobacteriaceae, and Yersinia frederiksenii have genes for chitin and cellulose degradation, acetate, and glutamate production. Unknown Enterobacteriaceae and Y. frederiksenii hold genes for synthesis of 10 essential amino acids required by birds, and the latter has genes for γ-aminobutyrate production. C. maltaromaticum has genes for pyridoxal synthesis. These results implied the gut microbiota is adapted to the host diet and may help black-necked cranes in pre-migratory energy accumulation by degrading the complex polysaccharide in their diet, supplying essential amino acids and vitamin pyridoxal, and producing acetate, glutamate, and γ-aminobutyrate that could stimulate host feeding. Additionally, enriched Proteobacteria also encoded more carbohydrate-active enzymes (CAZymes) and antibiotic resistance genes (ARGs) in late overwintering period. KEY POINTS: • Differences in gut microbiota function during overwintering period of black-necked cranes depend mainly on changes in core microbiota abundance • Gut microbiota of black-necked crane adapted to the diet during overwintering period • Gut microbiota could help black-necked cranes to accumulate more energy in the late overwintering period.

Dimethylaminododecyl Methacrylate-Incorporated Dental Materials Could Be the First Line of Defense against Helicobacter pylori.

Oral cavity is an essential reservoir for H. pylori. We aimed to investigate the antibacterial effects of dimethylaminododecyl methacrylate (DMADDM) against H. pylori. Modified giomers were prepared by introducing 0%, 1.25% and 2.5% DMADDM monomers. Broth microdilution assay, spot assay, Alamer Blue assay, PMA-qPCR, crystal violet staining, scanning electron microscopy observation and live/dead bacterial staining were performed to evaluate the antibacterial and antibiofilm effects of DMADDM and modified giomers in vitro. Urease assay, qPCR, hematoxylin-eosin staining and ELISA were performed to evaluate the inflammation levels and colonization of H. pylori in vivo. In vitro experiments indicated that the minimum inhibitory concentration and minimum bactericidal concentration of DMADDM were 6.25 µg/mL and 25 µg/mL, respectively. It inhibited H. pylori in a dose- and time-dependent manner, and significantly reduced the expression of cagA, vacA, flaA and ureB. DMADDM-modified giomers inhibited the formation of H. pylori biofilm and reduced live cells within it. In vivo experiments confirmed that the pretreatment with DMADDM-modified dental resin effectively reduced the gastric colonization of oral-derived H. pylori, suppressed systemic and local gastric inflammation. DMADDM monomers and DMADDM-modified giomers possessed excellent antibacterial and antibiofilm effects on H. pylori. Pretreatment with DMADDM-modified giomers significantly inhibited the gastric infection by H. pylori.

Gravity-driven membrane coupled with oxidation technology to modify the surface properties and biofilm formation: Biofouling mitigation.

Biofilms caused by biological fouling play an essential role in gravity-driven membranes' (GDMs) flux decline and rejection rate. The effects of ozone, permanganate, and ferrate (VI) in-situ pretreatment on membrane properties and biofilm formation were systematically studied. Due to the selective retention and adsorption of algal organic matter by biofilms and oxidative degradation, the rejection efficiency of dissolved organic carbon (DOC) in algae-laden water pretreated with permanganate by GDM was up to 23.63%. Pre-oxidation extraordinarily postponed flux decline and biofilm formation of GDM and reduced membrane fouling. The total membrane resistance decreased by 87.22%-90.30% within 72 h after pre-ozonation. Permanganate was more effective than ozone and ferrate (VI) in alleviating secondary membrane fouling caused by algal cells destroyed by pre-oxidation. Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory revealed that the distribution of electrostatic force (EL), acid-base (AB), and Lifshitz-van der Waals forces (LW) interactions between M. aeruginosa and the released intracellular algogenic organic matter (IOM) and ceramic membrane surface was similar. The membrane and foulants are always attracted to each other by LW interaction at different separation distances. The dominant fouling mechanism of GDM combined with pre-oxidation technology shifts from complete pore blocking to cake layer filtration during operation. After pre-oxidation of algae-laden water by ozone, permanganate, and ferrate (VI), GDM can treat at least 131.8%, 37.0%, and 61.5% more feed solution before forming a complete cake layer. This study provides new insights into the biological fouling control strategies and mechanisms for GDM coupled with oxidation technology, which is expected to alleviate membrane fouling and optimize the feed liquid pretreatment procedure.

Rational Design of Disulfide Bridges in BbPETaseCD for Enhancing the Enzymatic Performance in PET Degradation.

Polyethylene terephthalate (PET) is one of the most prevalent transparent thermoplastics. It is commonly utilized due to its low cost and high durability. With the massive accumulation of waste PET, however, serious environmental pollution has become a global problem. Compared to traditional chemical degradation, biodegradation of PET catalyzed by PET hydrolase (PETase) is more environmentally friendly and energy-efficient. BbPETaseCD from the Burkholderiales bacterium is a PETase that shows favorable properties for application in the biodegradation of PET. To enhance the enzymatic performance of this enzyme, this work focuses on the rational design of disulfide bridges in BbPETaseCD. We utilized two computational algorithms to predict the probable disulfide-bridge mutations in BbPETaseCD, and five variants were acquired from the computations. Among these, the N364C/D418C variant with one additional disulfide bond showed higher expression than the wild-type enzyme (WT) and the best enzymatic performance. The melting temperature (Tm) of the N364C/D418C variant presented an increase of 14.8 °C over that of WT (56.5 °C), indicating that the additional disulfide bond significantly raised the thermodynamic stability of the enzyme. Kinetic experiments at different temperatures also demonstrated the thermal stability increase of the variant. The variant also showed significantly increased activity over WT when using bis(hydroxyethyl) terephthalate (BHET) as the substrate. More remarkably, the N364C/D418C variant exhibited approximately an 11-fold increase over the WT enzyme in the long-term (14 days) degradation of PET films. The results prove that the rationally designed disulfide bond significantly improved the enzymatic performance of the enzyme for PET degradation.

Efficacy of recombinant human interleukin-11 in preventing and treating oral mucositis after chemotherapy for patients with acute leukemia.

OBJECTIVE: This study aimed to investigate the clinical effects of recombinant human interleukin-11 (rhIL-11) gargle on preventing and treating oral mucositis (OM) after chemotherapy for acute leukemia. METHODS: This single-site, prospective, observer-blinded, nonrandomized controlled trial was conducted on 74 patients with acute leukemia, who were divided into the experimental and control groups. The patients in the experimental group were treated with IL-11 gargle, and those in the control group were treated with sodium bicarbonate gargle. We examined the time and severity of oral mucositis, severity and duration of associated pain, healing time of mucositis, effects of OM on eating, and levels of T-cell subset indicators before and after treatment to evaluate the effects of IL-11 treatment. RESULTS: The proportion of patients with severe OM was significantly lower in the experimental group than in the control group. Mucositis occurred later in the experimental group compared with the control group. The degree and duration of pain, ulcer healing time, and effects on eating were lower in the experimental group compared with the control group. Following treatment, the levels of all T-cell subset indicators improved in each of the two groups. However, the rate of improvement was significantly higher in the experimental group than in the control group. These differences were statistically significant (P < 0.05). CONCLUSIONS: IL-11 gargle reduced the severity of OM after chemotherapy for acute leukemia. Treatment with IL-11 relieved pain, promoted healing, and improved the curative effect of the condition, making it worthy of clinical promotion.

Controlling the Biological Behaviors of Polymer-Coated Upconverting Nanoparticles by Adjusting the Linker Length of Estrone Ligands.

The estrone ligand is used for modifying nanoparticle surfaces to improve their targeting effect on cancer cell lines. However, to date, there is no common agreement on the ideal linker length to be used for the optimum targeting performance. In this study, we aimed to investigate the impact of poly(poly ethylene glycol methyl ether methacrylate) (PPEGMEMA) linker length on the cellular uptake behavior of polymer-coated upconverting nanoparticles (UCNPs). Different triblock terpolymers, poly(poly (ethylene glycol) methyl ether methacrylate)-block-polymethacrylic acid-block-polyethylene glycol methacrylate phosphate (PPEGMEMAx-b-PMAAy-b-PEGMP3: x = 7, 15, 33, and 80; y = 16, 20, 18, and 18), were synthesized with different polymer linker chain lengths between the surface and the targeting ligand by reversible addition-fragmentation chain transfer polymerization. The estrone ligand was attached to the polymer via specific terminal conjugation. The cellular association of polymer-coated UCNPs with linker chain lengths was evaluated in MCF-7 cells by flow cytometry. Our results showed that the bioactivity of ligand modification is dependent on the length of the polymer linker. The shortest polymer PPEGMEMA7-b-PMAA16-b-PEGMP3 with estrone at the end of the polymer chain was found to have the best cellular association behavior in the estrogen receptor (ER)α-positive expression cell line MCF-7. Additionally, the anticancer drug doxorubicin•HCl was encapsulated in the nanocarrier to evaluate the 2D and 3D cytotoxicity. The results showed that estrone modification could efficiently improve the cellular uptake in ERα-positive expression cell lines and in 3D spheroid models.

Path-related pain after implantation of anterior transvaginal mesh: perspective from anatomical study.

INTRODUCTION AND HYPOTHESIS: Pelvic organ prolapse (POP) is a common gynecological disease caused by defects in pelvic support tissue that manifests as the descent of the pelvic organs, significantly impacting patient quality of life. Transvaginal mesh (TVM) is an effective treatment (Grade A). However, postoperative pain in the groin and medial thigh is very common. Although the use of mesh for transvaginal POP repair has been prohibited or the indications for such use have been extensively limited in many places, it is still an alternative in some countries. Therefore, the safety of the use of mesh still needs to be discussed. The current research on postoperative pain has mainly focused on management. The pathophysiology is unclear. METHODS: In this study, anterior TVM surgery was performed on ten frozen cadavers. The obturator area was carefully dissected. We explored the relative position of the polypropylene mesh to the internal segment of the obturator nerve in the obturator canal. RESULTS: Four out of 20 obturator explorations were insufficient to allow conclusions to be drawn. We observed a small branch of the obturator nerve, which is a new anatomical finding that we named the obturator externus muscle branch. This structure terminated in the external obturator muscle in 6 out of the 16 successfully dissected obturator areas. The mean distance between the superficial mesh arm and this nerve branch was 7.5 mm. The mean distance between the deep mesh arm and the closest nerve branch was 5.5 mm. CONCLUSION: The path of the obturator externus muscle branch of the obturator nerve ran close to the mesh arm. It may provide a clinical anatomical basis explaining the observed postoperative pain.