Self-Adhesive, Strong Antifouling, and Mechanically Reinforced Methacrylate Hyaluronic Acid Cross-Linked Carboxybetaine Zwitterionic Hydrogels.

Hyaluronic acid and zwitterionic hydrogels are soft materials with poor mechanical properties. The unique structures and physiological properties make them attractive candidates for ideal hydrogel dressings, but the crux of lacking satisfying mechanical strengths and adhesive properties is still pendent. In this study, the physical cross-linking of dipole-dipole interactions of zwitterionic pairs was utilized to enhance the mechanical properties of hydrogels. The hydrogels have been prepared by copolymerizing methacrylate hyaluronic (HAGMA) with carboxybetaine methacrylamide (CBMAA) (the mass ratio of [HAGMA]/[CBMAA] is 2:5, 1:5, 1:10, or 1:20), obtaining HA-CB2.5, HA-CB5.0, HA-CB10.0, or HA-CB20.0 hydrogel. Therein, the HA-CB20.0 hydrogel with a high CBMAA content can generate a strong dipole-dipole interaction to form internal physical cross-links, exhibit stretchability and low elastic modulus, and withstand 99% compressive deformation and cyclic compression under strain at 90%. Moreover, the HA-CB20.0 hydrogel is adhesive to diverse substrates, including skin, glass, stainless steel, and plastic. The synergistic effect of HAGMA and CBMAA shows strong anti-biofouling, high water absorption, biodegradability under hyaluronidase, and biocompatibility.

Synthesis and Characterization of Palmitoyl-block-poly(methacryloyloxyethyl phosphorylcholine) Polymer Micelles for Anticancer Drug Delivery.

We report the synthesis and characterization of an amphiphilic polymer comprising a hydrophobic palmitoyl (Pal) group and a zwitterionic poly(2-methacryloyloxyethyl phosphorylcholine) (pMPC) block, which is capable of forming micelles as a drug carrier system for delivering hydrophobic anticancer drugs such as doxorubicin (DOX). We hypothesize that the sharp polarity contrast between the Pal domain and the pMPC block would strengthen the micelles and improve the drug loading capacity, while the pMPC shells improve the micelle stability and cellular uptake efficiency. In this study, the Pal-pMPC polymer was characterized and compared with a Pal-poly(ethylene glycol) (Pal-PEG) polymer in terms of their micelle formation, cytotoxicity, and drug loading of DOX. The DOX-loaded Pal-pMPC micelles were further evaluated for the cellular uptake and anticancer activities in cell culture systems including the non-multidrug-resistance HeLa cell line and the multidrug-resistance AT3B-1 cell line. The results showed that the Pal-pMPC polymer had a minimal toxicity. The Pal-pMPC micelles exhibited higher drug loading capacity and enhanced cellular internalization efficiency compared to micelles formed by the Pal-PEG polymer. It was also found that DOX-loaded Pal-pMPC micelles exhibited a more efficient anticancer effect than Pal-PEG micelles in multidrug-resistance cancer cells in an environment with fetal bovine serum.

Differential intestinal and oral microbiota features associated with gestational diabetes and maternal inflammation.

Maternal microbiota is involved in many metabolic diseases. However, its role in the pathophysiology of gestational diabetes mellitus (GDM) remains unclear. In this case-control study, we performed a 16S rRNA sequencing-based microbial survey to compare the intestinal and oral microflora at third trimester during pregnancy between 30 GDM and 31 normal controls. Sequentially, a correlation-based network analysis was further performed to explore the interactions among microbiota, maternal and infant blood sugar, and inflammatory markers. Our results show that, compared with controls, the GDM cases showed significant differences in ß-diversity and increased Gammaproteobacteria and Hemophilus in intestinal microbiota. Furthermore, the GDM cases showed lower α-diversity, increased Selenomonas and Bifidobacterium, and decreased Fusobacteria and Leptotrichia in oral microbiota. The ROC curve showed the area under the curve to be equal to 0.70 and 0.66 when using oral Leptotrichia or gut Hemophilus, respectively, to predict GDM status. In addition, the components and topography of microbial cooccurrence and coexclusion network were quite distinct by GDM status. In summary, intestinal and oral microorganisms in pregnant women are closely related to the status of GDM in the third trimester of pregnancy. The changes of intestinal and oral microbial features may be noninvasive biomarkers for monitoring the health management of GDM pregnancy.

Nanopore arrays in a silicon membrane for parallel single-molecule detection: fabrication.

Solid state nanopores enable translocation and detection of single bio-molecules such as DNA in buffer solutions. Here, sub-10 nm nanopore arrays in silicon membranes were fabricated by using electron-beam lithography to define etch pits and by using a subsequent electrochemical etching step. This approach effectively decouples positioning of the pores and the control of their size, where the pore size essentially results from the anodizing current and time in the etching cell. Nanopores with diameters as small as 7 nm, fully penetrating 300 nm thick membranes, were obtained. The presented fabrication scheme to form large arrays of nanopores is attractive for parallel bio-molecule sensing and DNA sequencing using optical techniques. In particular the signal-to-noise ratio is improved compared to other alternatives such as nitride membranes suffering from a high-luminescence background.

Nanopore arrays in a silicon membrane for parallel single-molecule detection: DNA translocation.

Optical nanopore sensing offers great potential in single-molecule detection, genotyping, or DNA sequencing for high-throughput applications. However, one of the bottle-necks for fluorophore-based biomolecule sensing is the lack of an optically optimized membrane with a large array of nanopores, which has large pore-to-pore distance, small variation in pore size and low background photoluminescence (PL). Here, we demonstrate parallel detection of single-fluorophore-labeled DNA strands (450 bps) translocating through an array of silicon nanopores that fulfills the above-mentioned requirements for optical sensing. The nanopore array was fabricated using electron beam lithography and anisotropic etching followed by electrochemical etching resulting in pore diameters down to ∼7 nm. The DNA translocation measurements were performed in a conventional wide-field microscope tailored for effective background PL control. The individual nanopore diameter was found to have a substantial effect on the translocation velocity, where smaller openings slow the translocation enough for the event to be clearly detectable in the fluorescence. Our results demonstrate that a uniform silicon nanopore array combined with wide-field optical detection is a promising alternative with which to realize massively-parallel single-molecule detection.

Depth dose perturbation by a hydrogel fiducial marker in a proton beam.

The purpose of this study was to evaluate proton depth dose perturbation caused by a radio-opaque hydrogel fiducial marker. Electronic proton stopping powers in the hydrogel were calculated for energies 0.5-250 MeV, and Monte Carlo simulations were generated of hydrogel vs. gold markers placed at various water phantom depths in a generic proton beam. Across the studied energy range, the gel/water stopping power ratio was 1.0146 to 1.0160. In the Monte Carlo simulation, the hydrogel marker caused no discernible perturbation of the proton percent depth-dose (PDD) curve. In contrast, the gold marker caused dose reductions of as much as 20% and dose shadowing regions as long as 6.5 cm. In contrast to gold markers, the radio-opaque hydrogel marker causes negligible proton depth dose perturbation. This factor may be taken into consideration for image-guided proton therapy at facilities with suitable imaging modalities.

Polyglycerol sebacate-based elastomeric materials for arterial regeneration.

Synthetic vascular grafts are commonly used in patients with severe occlusive arterial disease when autologous grafts are not an option. Commercially available synthetic grafts are confronted with challenging outcomes: they have a lower patency rate than autologous grafts and are currently unable to promote arterial regeneration. Polyglycerol sebacate (PGS), a non-toxic polymer with a tunable degradation profile, has shown promising results as a small-diameter vascular graft component that can support the formation of neoarteries. In this review, we first present an overview of the synthesis and modification of PGS followed by an examination of its mechanical properties. We then report on the performance, degradation, regeneration, and remodeling of PGS-based small-diameter vascular grafts, with a focus on efforts to reduce thrombosis, prevent dilation, and promote cellular residency and extracellular matrix regeneration that resembles the native artery in spatial distribution and organization. We also highlight recent advances in the incorporation of novel in situ cell sources for arterial regeneration and their potential application in PGS-based vascular grafts. Finally, we compare vascular grafts fabricated using PGS-based materials with other elastomeric alternatives.

Introducing terminal alkyne groups at the reducing end of cellulose nanocrystals by aldimine condensation for further click reaction.

In recent years, click reactions with cellulose nanocrystals (CNC) participation have gradually become a research hotspot. Carboxylamine condensation is the most used method to introduce terminal alkyne groups at the reducing end of CNC as reaction sites for click reactions. However, hydroxyl groups on CNC surface would be slightly oxidized during the carboxyamine condensation process, inducing the potential positions of introduced alkynes would be not only at the reducing end but also on CNC surface. Here, aldimine condensation was proposed to introduce terminal alkyne groups just at the reducing end of CNC, and a systematic comparison analysis was conducted with carboxylamine condensation. Firstly, the selectivity and extent of alkynylation were characterized by XPS and EA. Secondly, the end aldehyde content in these CNC samples was measured by the BCA method, which quantitatively explained the grafting efficiency of aldimine condensation and further verified its feasibility. Thirdly, the clickability of the modified CNC samples was confirmed through XPS analysis of the products after a pre-designed click reaction. In sum, aldimine condensation was proven to be a simple and effective strategy for introducing terminal alkyne groups at the reducing end of CNC, which could be used as reaction sites for further click reactions.

Organic photoelectrochemical transistor aptasensor for dual-mode detection of DEHP with CRISPR-Cas13a assisted signal amplification.

Emerging organic photoelectrochemical transistors (OPECTs) with inherent amplification capabilities, good biocompatibility and even self-powered operation have emerged as a promising detection tool, however, they are still not widely studied for pollutant detection. In this paper, a novel OPECT dual-mode aptasensor was constructed for the ultrasensitive detection of di(2-ethylhexyl) phthalate (DEHP). MXene/In2S3/In2O3 Z-scheme heterojunction was used as a light fuel for ion modulation in sensitive gated OPECT biosensing. A transistor system based on poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) converted biological events associated with photosensitive gate achieving nearly a thousand-fold higher current gain at zero bias voltage. This work quantified the target DEHP by aptamer-specific induction of CRISPR-Cas13a trans-cutting activity with target-dependent rolling circle amplification as the signal amplification unit, and incorporated the signal changes strategy of biocatalytic precipitation and TMB color development. Combining OPECT with the auxiliary validation of colorimetry (CM), high sensitivity and accurate detection of DEHP were achieved with a linear range of 0.1 pM to 200 pM and a minimum detection limit of 0.02 pM. This study not only provides a new method for the detection of DEHP, but also offers a promising prospect for the gating and application of the unique OPECT.

Rational design of multifunctional hydrogels targeting the microenvironment of diabetic periodontitis.

Periodontitis is a chronic inflammatory disease and is the primary contributor to adult tooth loss. Diabetes exacerbates periodontitis, accelerates periodontal bone resorption. Thus, effectively managing periodontitis in individuals with diabetes is a long-standing challenge. This review introduces the etiology and pathogenesis of periodontitis, and analyzes the bidirectional relationship between diabetes and periodontitis. In this review, we comprehensively summarize the four pathological microenvironments influenced by diabetic periodontitis: high glucose microenvironment, bacterial infection microenvironment, inflammatory microenvironment, and bone loss microenvironment. The hydrogel design strategies and latest research development tailored to the four microenvironments of diabetic periodontitis are mainly focused on. Finally, the challenges and potential solutions in the treatment of diabetic periodontitis are discussed. We believe this review will be helpful for researchers seeking novel avenues in the treatment of diabetic periodontitis.

A supramolecular colloidal system based on folate-conjugated ß-cyclodextrin polymer and indocyanine green for enhanced tumor-targeted cell imaging in 2D culture and 3D tumor spheroids.

Indocyanine green (ICG) is an FDA-approved medical diagnostic agent that is widely used as a near-infrared (NIR) fluorescent imaging molecular probe. However, ICG tends to aggregate to form dimers or H-aggregates in water and lacks physical and optical stability, which greatly decreases its absorbance and fluorescence intensity in various applications. Additionally, ICG has no tissue- or tumor-targeting properties, and its structure is not easy to modify, which has further limited its application in cancer diagnosis. In this study, we addressed these challenges by developing a supramolecular colloidal carrier system that targets tumor cells. To this end, we synthesized a water-soluble ß-cyclodextrin (ß-CD) polymer conjugated with folate (FA), denoted PCD-FA, which is capable of forming inclusion complexes with ICG in water through host-guest interactions between the ß-CD moieties and ICG molecules. The inclusion complexes formed by PCD-FA and ICG, called ICG@PCD-FA, dispersed stably in solution as colloidal nanoparticles, greatly improving the physical and optical properties of ICG by preventing ICG dimer formation, where ICG appeared as monomers and even J-aggregates. This resulted in stronger and more stable absorption at a longer wavelength of 900 nm, which may allow for deeper tissue penetration and imaging with reduced interference from biological tissues' autofluorescence. Moreover, ICG@PCD-FA showed a targeting effect on folate receptor-positive (FR+) tumor cells, which specifically highlighted FR+ cells via NIR endoscopic imaging. Notably, ICG@PCD-FA further improved permeation and accumulation in FR+ 3D tumor spheroids. Therefore, this ICG@PCD-FA supramolecular colloidal system may have a great potential for use in tumor NIR imaging and diagnostic applications.

Gel-confined fabrication of fully bio-based filtration membrane for green capture and rapid detection of airborne microbes.

Air filtration has become a desirable route for collecting airborne microbes. However, the potential biotoxicity and sterilization of current air filtration membranes often lead to undesired inactivation of captured microbes, which greatly limits microbial non-traumatic transfer and recovery. Herein, we report a gel-confined phase separation strategy to rationally fabricate a fully bio-based filtration membrane (SGFM) using soluble soybean polysaccharide and gelatin. The versatile SGFM features fascinating honeycomb micro-nano architecture and hierarchical interconnected porous structures for microbial capture, and achieves a lower pressure drop, higher interception efficiency (99.3%), and superior microbial survivability than commercial gelatin filtration membranes. Particularly, the water-dissolvable SGFM can greatly simplify the elution and extraction process after bioaerosol sampling, thereby bringing about maximum sample transfer and vigorous recovery of collected microbes. Meanwhile, green capture coupled with ATP bioluminescence endows the SGFM with rapid and quantitative detection capability for airborne microbes. This work may pave the way for designing green protocols for the detection of bioaerosols.

Sulfated Chitosan-Modified CuS Nanocluster: A Versatile Nanoformulation for Simultaneous Antibacterial and Bone Regenerative Therapy in Periodontitis.

Periodontitis, a prevalent chronic inflammatory disease worldwide, is triggered by periodontopathogenic bacteria, resulting in the progressive destruction of periodontal tissue, particularly the alveolar bone. To effectively address periodontitis, this study proposed a nanoformulation known as CuS@MSN-SCS. This formulation involves coating citrate-grafted copper sulfide (CuS) nanoparticles with mesoporous silica (MSNs), followed by surface modification using amino groups and sulfated chitosan (SCS) through electrostatic interactions. The objective of this formulation is to achieve efficient bacteria removal by inducing ROS signaling pathways mediated by Cu2+ ions. Additionally, it aims to promote alveolar bone regeneration through Cu2+-induced pro-angiogenesis and SCS-mediated bone regeneration. As anticipated, by regulating the surface charges, the negatively charged CuS nanoparticles capped with sodium citrate were successfully coated with MSNs, and the subsequent introduction of amine groups using (3-aminopropyl)triethoxysilane was followed by the incorporation of SCS through electrostatic interactions, resulting in the formation of CuS@MSN-SCS. The developed nanoformulation was verified to not only significantly exacerbate the oxidative stress of Fusobacterium nucleatum, thereby suppressing bacteria growth and biofilm formation in vitro, but also effectively alleviate the inflammatory response and promote alveolar bone regeneration without evident biotoxicity in an in vivo rat periodontitis model. These findings contribute to the therapeutic effect on periodontitis. Overall, this study successfully developed a nanoformulation for combating bacteria and facilitating alveolar bone regeneration, demonstrating the promising potential for clinical treatment of periodontitis.

Efficacy of spray flushing in the reprocessing of flexible endoscopes: A randomized controlled trial.

BACKGROUND: Commonly used cleaning brushes in the reprocessing of flexible endoscopes often cause damage within the working channels. AIM: To develop a spray flushing system to achieving effective cleaning of the working channels while minimizing damage. METHODS: This prospective study included 60 used endoscopes and 60 Teflon tubes randomly divided into a control group (n = 30) and an experimental group (n = 30). The material of Teflon tubes was the same as that of the endoscope working channel. Endoscopes in the control group were manually cleaned using traditional cleaning brushes, while those in the experimental group were cleaned using the newly developed spray flushing system. ATP levels, cleanliness, and microbiological testing of the working channels were measured. Additionally, Teflon tubes in the control group underwent 500 passes with a cleaning brush, while those in the experimental group were subjected to the spray flushing system, and channel damage was evaluated. RESULTS: The ATP levels (RLU) in the two groups were 32.5 (13-66) and 26 (16-40), respectively (P > 0.05). Cleanliness scores were 1.5 (1-2) and 1 (1-2), respectively (P > 0.05). Debris was found in 73.3% of the control group, which was significantly higher than 46.7% in the experimental group (P < 0.05). Microbiological tests for both groups yielded negative results. Teflon tube damage in the control group was rated at 4 (4-5.25), which was significantly higher than in the experimental group 4 (3-4) (P < 0.01). CONCLUSION: The spray flushing system demonstrated superior efficacy in removing debris and resulted in less damage to the endoscope working channels compared with traditional cleaning brushes.

Decellularized Antler Cancellous Bone Matrix Material Can Serve as Potential Bone Tissue Scaffold.

Due to the limited supply of autologous bone grafts, there is a need to develop more bone matrix materials to repair bone defects. Xenograft bone is expected to be used for clinical treatment due to its exact structural similarity to natural bone and its high biocompatibility. In this study, decellularized antler cancellous bone matrix (DACB) was first prepared, and then the extent of decellularization of DACB was verified by histological staining, which demonstrated that it retained the extracellular matrix (ECM). The bioactivity of DACB was assessed using C3H10T1/2 cells, revealing that DACB enhanced cell proliferation and facilitated cell adhesion and osteogenic differentiation. When evaluated by implanting DACB into nude mice, there were no signs of necrosis or inflammation in the epidermal tissues. The bone repair effect of DACB was verified in vivo using sika deer during the antler growth period as an animal model, and the molecular mechanisms of bone repair were further evaluated by transcriptomic analysis of the regenerated tissues. Our findings suggest that the low immunogenicity of DACB enhances the production of bone extracellular matrix components, leading to effective osseointegration between bone and DACB. This study provides a new reference for solving bone defects.

Revelation of adhesive proteins affecting cellular contractility through reference-free traction force microscopy.

Over the past few decades, the critical role played by cellular contractility associated mechanotransduction in the regulation of cell functions has been revealed. In this case, numerous biomaterials have been chemically or structurally designed to manipulate cell behaviors through the regulation of cellular contractility. In particular, adhesive proteins including fibronectin, poly-L-lysine and collagen type I have been widely applied in various biomaterials to improve cell adhesion. Therefore, clarifying the effects of adhesive proteins on cellular contractility has been valuable for the development of biomaterial design. In this study, reference-free traction force microscopy with a well-organized microdot array was designed and prepared to investigate the relationship between adhesive proteins, cellular contractility, and mechanotransduction. The results showed that fibronectin and collagen type I were able to promote the assembly of focal adhesions and further enhance cellular contraction and YAP activity. In contrast, although poly-L-lysine supported cell spreading and elongation, it was inefficient at inducing cell contractility and activating YAP. Additionally, compared with cellular morphogenesis, cellular contraction was essential for YAP activation.

Lithocarpusdahuensis (Fagaceae), a new species from Fujian Province based on morphology and genomic data.

Lithocarpusdahuensis, a new Fagaceae species from Fujian Province, China, is described and illustrated. The new species is morphologically similar to L.konishii, but its oblanceolate leaf blade has more pairs of acute teeth on the margin, denser lateral veins, smaller cupules enclosing up to 1/4-1/3 of the nut, and its nut is only half as long as those of L.konishii. The plastome of L.dahuensis was 161,303 bp in length and displayed the typical quadripartite structure. Phylogenetic analyses distinguished L.dahuensis from L.konishii with strong support based on whole plastome and nrITS, respectively.

GPP-TSAIII nanocomposite hydrogel-based photothermal ablation facilitates melanoma therapy.

BACKGROUND: Photothermal therapy (PTT) is a promising cancer treatment, but its application is limited by low photoconversion efficiency. In this study, we aimed to develop a novel graphene oxide (GO)-based nanocomposite hydrogel to improve the bioavailability of timosaponin AIII (TSAIII) while maximizing PTT efficacy and enhancing the antitumor effect. METHODS: GO was modified via physical cross-linking with polyvinyl alcohol. The pore structure of the gel was adjusted by repeated freeze-thawing and the addition of polyethylene glycol 2000 to obtain a nanocomposite hydrogel (GPP). The GPP loaded with TSAIII constituted a GPP-TSAIII drug delivery system, and its efficacy was evaluated by in vitro cytotoxicity, apoptosis, migration, and uptake analyses, and in vivo antitumor studies. RESULTS: The encapsulation rate of GPP-TSAIII was 66.36 ± 3.97%, with slower in vitro release and higher tumor cell uptake (6.4-fold) compared to TSAIII. GPP-TSAIII in combination with PTT showed better bioavailability and antitumor effects in vivo than did TSAIII, with a 1.9-fold higher tumor suppression rate than the TSAIII group. CONCLUSIONS: GPP is a potential vehicle for delivery of TSAIII-like poor water-soluble anticancer drugs. The innovative PTT co-delivery system may serve as a safe and effective melanoma treatment platform for further anticancer translational purposes.

Numerical simulation research of the transportation and distribution characteristics on sea surface of the microplastic released continuously for 12 years from China's coastal cities.

Based on the Lagrangian random walk particle tracking method and the global ocean reanalysis data, this study simulated the drift-diffusion process in ocean of microplastic particles (density less than seawater) discharged by coastal cities in China for 12 consecutive years. The results reveal that most of the microplastics (80.33%) essentially end up ashore or in the marginal seas around China, a small portion of microplastics (18.22%) enter the Sea of Japan and the Northwest Pacific Ocean via the Tsushima Strait and the Osumi-Kaikyo with the Kuroshio Tide, a very small portion of microplastics (1.45%) enter into the waters of Southeast Asian countries along with the west boundary current of South China Sea. The concentration distribution characteristics have obvious seasonal variation in the high concentration areas (the marginal seas around China and Sea of Japan). The mainly destination area of microplastics released in different cities is different.

A cyclic brush zwitterionic polymer based pH-responsive nanocarrier-mediated dual drug delivery system with lubrication maintenance for osteoarthritis treatment.

Enhanced joint synergistic lubrication combined with anti-inflammatory therapy is an effective strategy to delay the progression of early osteoarthritis (OA) but has been rarely reported. The hydration lubrication of zwitterions and inherent super-lubrication properties of the cyclic brush, as well as the enhancement of the steric stability of the cyclic topology, can effectively improve the drug loading and utilization; herein we report a pH-responsive cyclic brush zwitterionic polymer (CB) with SBMA and DMAEMA as brushes and a cyclic polymer (c-P(HEMA)) as the core template, possessing a low coefficient of friction (0.017). After loading with hydrophobic curcumin and hydrophilic loxoprofen sodium it demonstrates high drug-loading efficiency. In vitro and in vivo experiments confirmed the triple function of the CB on superlubrication, sequence controlled release and anti-inflammatory effects demonstrated by Micro CT, histological analysis and qRT-PCR. Overall, the CB is a promising long-acting lubricating therapeutic agent, with potential for OA treatment or other diseases.