[Clinical outcomes following microsurgery and endovascular embolization in the management of spinal dural arteriovenous fistula: A meta-analysis study].

OBJECTIVE: To compare the clinical effect of microsurgery and endovascular embolization in the treatment of spinal dural arteriovenous fistula (SDAVF) by meta-analysis. METHODS: A systematic review was performed to retrieve all relevant literature about surgical treatment or endovascular embolization of SDAVF up to December 2019 through PubMed, Embase, Web of Science, Cochrane Central Register of Controlled Trials Results, CNKI, Wanfang Data, and SinoMed. The Chinese and English key words included: "SDAVF", "spinal dural arteriovenous fistula", "spinal AVM", "spinal vascular malformation and treatment". The included studies were evaluated using the Newcastle-Ottawa scale. The early failure rate, long-term recurrence, neurological recovery, and complications were evaluated and the clinical effects of the two methods in the treatment of SDAVF were compared by using RevMan 5.3 software. And a further subgroup analysis of the therapeutic effect of endovascular embolization with different embolic agents was conducted. RESULTS: A total of 46 studies involving 1 958 cases of SDAVF were included, in which 935 cases were treated by microsurgery and 1 023 cases were treated by endovascular embolization. The funnel plot demonstrated that there was no publication bias. The results of meta-analysis showed that the incidence of early surgical failure was lower than that of endovascular embolization (OR=0.20, 95%CI: 0.13-0.30, P < 0.05), and the long-term recurrence was also lower than that of endovascular embolization (OR=0.36, 95%CI: 0.22-0.58, P < 0.05). The improvement of neurological function in the surgical patients is significantly higher than that in the patients treated with endovascular embolization (OR=2.86, 95%CI: 1.36-5.99, P < 0.05). There was no significant difference in the occurrence of complications in these two groups (OR=1.52, 95%CI: 0.88-2.64, P=0.14). In the cases of endovascular embolization, the risk of treatment failure or recurrence was higher with Onyx glue than with n-butyl 2-cyanoacrylate (NBCA), and the difference was statistically significant (OR=4.70, 95%CI: 1.55-14.28, P < 0.05). CONCLUSION: Although the treatment of dural arteriovenous fistulas by intravascular embolization has been widely used, the clinical effect of microsurgery is still better than that of endovascular embolization. Large scale and high-quality randomized controlled trials are required to validate the efficacy and safety of endovascular treatment in SDAVF patients.

[Application of transvaginal morcellation within disposable extraction bag with traction wire in laparoscopic myomectomy].

To investigate the effect and clinical value of morcellation within disposable extraction bag with traction wire through posterior vaginal fornix in laparoscopic myomectomy. A total of 42 patients who underwent laparoscopic myomectomy and morcellation through posterior vaginal fornix in the Second Affiliated Hospital of Soochow University from June 2019 to June 2021 were retrospectively analyzed. After the uterine fibroids were removed, the fibroids were placed into the extraction bag, tightening the mouth of the bag with a traction wire to make it airtight. After the uterine incisions were sutured, the extraction bag was taken out through the posterior fornix of the vagina, and the fibroids were broken up with a scalpel in the bag and taken out. The fibroids were successfully removed from the 42 patients through the posterior fornix of the vagina. There were no fibroids fragments found in the peritoneal cavity and vagina. There were no malignant cells or spindle cells found in the peritoneal lavage cytology before and after the operation. After filling the extraction bags with water, there was no leakage. There were 39 cases of uterine leiomyoma, 2 cases of cell-rich uterine leiomyoma, and 1 case of smooth muscle tumor of uncertain malignant potential in postoperative pathological diagnosis. Forty-two cases were followed up for 6 to 30 months. The posterior vaginal fornix incision healed well and there was no recurrence or metastasis. Morcellation within disposable extraction bag with traction wire through posterior vaginal fornix in laparoscopic myomectomy is a safe and feasible method for fibroids removal, which may help to reduce the dissemination of iatrogenic tumors.

[Preliminary study of the antibacterial effect on the conjunctival sac and the influence on the corneal epithelium of domestic 5% povidone-iodine before cataract extraction].

Objective: To investigate the efficacy and adverse reactions of 5% povidone-iodine in removing bacteria from the conjunctival sac with different durations. Methods: Randomized controlled study. A total of 420 patients who underwent cataract surgery in Daping Hospital, Army Medical University from December 2017 to June 2018 were selected. Non-surgical eyes (420 eyes) were selected as the study subjects and divided into 4 groups randomly: 30-second group, 1.0-min group, 2.0-min group and 3.5-min group. On the day of surgery, domestic 5% povidone-iodine was used to flush the conjunctival sac for 30 seconds, 1.0 min, 2.0 min and 3.5 min, respectively. The conjunctival sac specimens were collected for bacterial culture and bacterial identification before and after flushing the conjunctival sac with povidone-iodine. The positive rates of bacterial culture and bacterial growth were compared. The patients' ocular surface was observed and the incidence of corneal epithelial injury was recorded at 1 hour and 1 day after surgery. The positive rates of bacterial culture and corneal epithelial injury between groups were compared by Pearson chi-square test. Results: After excluding 20 patients with suspected specimens contamination, 400 patients (400 non-surgical eyes) were enrolled, including 191 males and 209 females, with an average age of 66.8 years. Before flushing the conjunctival sac, the positive rates of bacterial culture in the 30-second group, 1.0-min group, 2.0-min group and 3.5-min group were 44.8% (43/96), 43.3% (39/90), 43.1% (47/109) and 43.8% (46/105), respectively, with no statistically significant difference (χ(2)=0.066, P=0.996). After flushing, the positive rates of conjunctival sac bacterial culture in the 4 groups were 29.2% (28/96), 31.1% (28/90), 13.8% (15/109) and 13.3% (14/105), respectively. The differences between the 30-second group and 2.0-min group (χ(2)=7.308, P=0.007), between the 1.0-min group and 2.0-min group (χ(2)=8.760, P=0.003), between the 30-second group and 3.5-min group (χ(2)=7.606, P=0.006), and between the 1.0-min group and 3.5-min group (χ(2)=9.063, P=0.003) were statistically significant. At 1 hour after surgery, mild corneal epithelial injury occurred in each group, with a rate of 16.7% (16/96), 18.9% (17/90), 20.2% (22/109) and 34.3% (36/105), respectively. The differences between the 30-second group and 3.5-min group (χ(2)=8.118, P=0.004), between the 1.0-min group and 3.5-min group (χ(2)=5.804, P=0.016), and between the 2.0-min group and 3.5-min group (χ(2)=5.383, P=0.020) were statistically significant. At 1 day after surgery, there was no occurrence of new injury, and the incidence of mild corneal injury in each group was 3.1% (3/96), 5.6% (5/90), 9.2% (10/109) and 15.2% (16/105), respectively. There was statistically significant difference between the 30-second group and 3.5-min group (χ(2)=8.597, P=0.003), and between the 1.0-min group and 3.5-min group (χ(2)=4.728, P=0.030). The corneal epithelial injury healed completely at 1 week after surgery. Conclusions: The preoperative bacterial load of the conjunctival sac is more effectively reduced with 5% povidone-iodine in the 2.0-min and 3.5-min than in the 30-second and 1.0-min, and the 2-min is superior to the 3.5-min in the occurrence of corneal epithelial injury at 1 hour after surgery. Irrigation of the conjunctival sac with 5% povidone-iodine for 2 min is effective and safe, which can be an alternative measure. (Chin J Ophthalmol, 2019, 55: 509-514).

WNT10A polymorphism may be a risk factor for non-syndromic hypodontia.

This study was designed to determine whether polymorphisms in the gene wingless-type MMTV integration site family, member 10A (WNT10A) are associated with non-syndromic hypodontia (tooth agenesis). A case-control study was performed involving 129 subjects with sporadic non-syndromic hypodontia (cases) and 218 healthy individuals (controls). DNA was obtained from whole blood and the ligase detection reaction method was used to analyze two single nucleotide polymorphisms (SNPs) of the WNT10A gene. A significant difference between cases and controls was observed in the allele and genotype frequencies of both SNPs (rs116998555 and rs147680216). For rs116998555, the presence of the T allele (the thymine variant) was associated with tooth agenesis [odds ratio (OR) = 5.722; 95% confidence interval (CI) = 3.053-10.727; P < 0.001], while for rs147680216, the A allele (the adenine variant) correlated with this condition (OR = 2.665; 95%CI = 1.512-4.695; P < 0.001). We provide here the first case-control study evidence that risk of hypodontia may be related to the WNT10A polymorphism. Our results also confirm the importance of the Wnt pathway in tooth development.

DPSCs regulate epithelial-T cell interactions in oral submucous fibrosis.

BACKGROUND: Oral submucous fibrosis (OSF) is a precancerous lesion characterized by fibrous tissue deposition, the incidence of which correlates positively with the frequency of betel nut chewing. Prolonged betel nut chewing can damage the integrity of the oral mucosal epithelium, leading to chronic inflammation and local immunological derangement. However, currently, the underlying cellular events driving fibrogenesis and dysfunction are incompletely understood, such that OSF has few treatment options with limited therapeutic effectiveness. Dental pulp stem cells (DPSCs) have been recognized for their anti-inflammatory and anti-fibrosis capabilities, making them promising candidates to treat a range of immune, inflammatory, and fibrotic diseases. However, the application of DPSCs in OSF is inconclusive. Therefore, this study aimed to explore the pathogenic mechanism of OSF and, based on this, to explore new treatment options. METHODS: A human cell atlas of oral mucosal tissues was compiled using single-cell RNA sequencing to delve into the underlying mechanisms. Epithelial cells were reclustered to observe the heterogeneity of OSF epithelial cells and their communication with immune cells. The results were validated in vitro, in clinicopathological sections, and in animal models. In vivo, the therapeutic effect and mechanism of DPSCs were characterized by histological staining, immunohistochemical staining, scanning electron microscopy, and atomic force microscopy. RESULTS: A unique epithelial cell population, Epi1.2, with proinflammatory and profibrotic functions, was predominantly found in OSF. Epi1.2 cells also induced the fibrotic process in fibroblasts by interacting with T cells through receptor-ligand crosstalk between macrophage migration inhibitory factor (MIF)-CD74 and C-X-C motif chemokine receptor 4 (CXCR4). Furthermore, we developed OSF animal models and simulated the clinical local injection process in the rat buccal mucosa using DPSCs to assess their therapeutic impact and mechanism. In the OSF rat model, DPSCs demonstrated superior therapeutic effects compared with the positive control (glucocorticoids), including reducing collagen deposition and promoting blood vessel regeneration. DPSCs mediated immune homeostasis primarily by regulating the numbers of KRT19 + MIF + epithelial cells and via epithelial-stromal crosstalk. CONCLUSIONS: Given the current ambiguity surrounding the cause of OSF and the limited treatment options available, our study reveals that epithelial cells and their crosstalk with T cells play an important role in the mechanism of OSF and suggests the therapeutic promise of DPSCs.

Fabrication and evaluation of porous coatings doped with bioactive elements on titanium surfaces.

OBJECTIVE: Although pure titanium (PT) and its alloys exhibit excellent mechanical properties, they lack biological activity as implants. The purpose of this study was to improve the biological activity of titanium implants through surface modification. MATERIALS AND METHODS: Titanium was processed into titanium discs, where the titanium discs served as anodes and stainless steel served as cathodes, and a copper- and cobalt-doped porous coating [pure titanium model (PTM)] was prepared on the surface of titanium via plasma electrolytic oxidation. The surface characteristics of the coating were evaluated using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and profilometry. The corrosion resistance of PTM was evaluated with an electrochemical workstation. The biocompatibility and bioactivity of coated bone marrow mesenchymal stem cells (BMSCs) were evaluated through in vitro cell experiments. RESULTS: A copper- and cobalt-doped porous coating was successfully prepared on the surface of titanium, and the doping of copper and cobalt did not change the surface topography of the coating. The porous coating increased the surface roughness of titanium and improved its resistance to corrosion. In addition, the porous coating doped with copper and cobalt promoted the adhesion and spreading of BMSCs. CONCLUSIONS: A porous coating doped with copper and cobalt was prepared on the surface of titanium through plasma electrolytic oxidation. The coating not only improved the roughness and corrosion resistance of titanium but also exhibited good biological activity.

[Clinical features, diagnosis and treatment key points of dental implant prostheses for diabetic patients].

Diabetes mellitus is a relative contraindication of dental implant therapy, that limits the application of implant therapy severely. Diabetic status often leads to secondary vascular and bone lesions, which affect treatment adversely and lead to an increased failure rate. Therefore, how to implement implant therapy for diabetic patients has become a difficult question for dentists. According to the research and experience over the years on diabetic patients, and referring to the current research progress on this topic, the authors will discuss the clinical characteristics of diabetic patients and the details of treatment process, for reference.

[Influence of guided bone regeneration on marginal bone loss of implants in the mandible posterior region: a 10-year retrospective cohort study].

Objective: To investigate the effect of guided bone regeneration (GBR) on marginal bone loss (MBL) in the region of the mandibular posterior tooth by using a retrospective cohort study, in order to provide reference for clinical practice. Methods: The research subjects were patients who received dental implants from October 2008 to June 2011 in the region of the mandibular posterior tooth at the Department of Oral Implantology, School of Stomatology, The Fourth Military Medical University. According to whether GBR was performed or not and the time of implant insertion, the patients were divided into the controls group (patients without bone grafting), simultaneous GBR implantation group, and delayed GBR implantation group. On this basis, the MBL was measured according to radiographs by comparing the marginal bone level from that of immediate postoperation 10 years ago. General data was collected and compared among groups, including modified plaque index (mPI), modified sulcus bleeding index (mSBI), probing depth (PD), and gingival papilla height. Results: The controls group (patients without bone grafting), implantation group, and delayed GBR implantation group followed 58, 76, 26 implants in 26, 32, 13 patients aging at (46.5±9.9), (45.5±10.7), (58.3±6.4) respectively. The duration of the follow-up was (11.2±0.7), (11.1±0.8), (11.1±0.9) years respectively. The 10-year implant survival rate was 100% (58/58), 100% (76/76), 100% (26/26). The MBL was (0.91±0.28), (0.84±0.27), (1.01±0.27) mm respectively. The MBL difference of patients with simultaneous GBR implantation and delayed GBR implantation showed statistical significance (P<0.05), but these two groups showed no statistical significance compared with the controls group (P>0.05). The mPI, mSBI, PD, and gingival papilla height of the three groups all had no significance on statistics (P>0.05). Conclusions: It can be concluded that there is no difference in long-term marginal bone resorption between simultaneous and delayed implantation with or without GBR (using autologous blood mixed with granular bone meal) in the posterior mandibular area.

Comparative evaluation of the biocompatible and physical-chemical properties of poly(lactide-co-glycolide) and polydopamine as coating materials for bacterial cellulose.

The aim of this study was to investigate the influence of poly(lactide-co-glycolide) (PLGA) and polydopamine (PDA) as coating materials on the tensile strength, surface performance, in vitro cell behavior and the in vivo material-tissue reaction of bacterial cellulose (BC) membranes. The coated membranes were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electron microscopy (SEM), demonstrating that the PDA forms the dispersion phase and penetrates into the BC substrates while PLGA only adheres to the BC surface. Mechanical tests and fractured surface morphology reveal that penetration of PDA into BC membranes enhances the mechanical strength by strongly bonding the nanofibers. The PLGA coated BC membrane obtained by adhesion debonds from the BC substrate under stress, leading to a decrease in the mechanical strength of the membrane. The in vitro cell culture experiments were established to assess cell attachment and spreading by SEM and DAPI (4',6-diamidino-2-phenylindole) staining and expression of collagen I, which showed a better performance on the PDA-BC than on the PLGA-BC and bare BC membranes. However, the in vivo results of the rabbit back implantation indicated that BC membrane surface modification by PDA is not effective for cell proliferation and collagen accumulation when compared to bare and PLGA coated BC, whereas PLGC-BC were surrounded by a thicker layer of connective tissues with slight neovascularization demonstrating superior tissue integration. PDA based materials still have a long way to go before clinical applications. However, PLGA coating has excellent biocompatibility in clinical as well as in experimental use.

[Effects of different concentrations of MgSiF(6) as electrolyte for micro-arc oxidation on the bond strength between titanium and porcelain].

Objective: To investigate the effects of different concentrations of MgSiF(6) as electrolyte on the bond strength between titanium and porcelain after micro-arc oxidation (MAO) treatment and screen the suitable concentration of MgSiF(6) that can improve the bond strength between titanium and porcelain. Methods: Four different concentrations of MgSiF(6) (10, 20, 30, 40 g/L) were chosen as MAO reaction solutions. Sandblasting treatment was selected as a control group. After porcelain was fused to each specimen, titanium-porcelain bond strengths were evaluated by the three-point bending test according to ISO 9693. Scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) were adopted to evaluate the morphologies and elemental compositions of both the MAO coatings and the interfaces of the titanium-porcelain restoration. Results: The surface of titanium specimen in the control group was sharp and rough, while specimens in both 10 g/L group and 20 g/L group were porous and homogeneous. However, the pores found on the specimens in the latter group were larger in diameter (approximately 1.0-2.0 µm) than those on the former one (0.2-0.5 µm). The bond strengths of the control group and the experimental groups (10, 20, 30, 40 g/L MgSiF(6)) were (27.08±3.16), (38.18±2.65), (44.75±2.21), (36.44±2.04), (31.04±2.59) MPa, respectively. All the experimental groups showed higher bond strengths than the control group did (P<0.05), and the bond strength of 20 g/L MgSiF(6) group was significantly higher than those of the other groups (P<0.05). Besides, the interfaces between titanium and porcelain were tight and compact in the 20 g/L group, while different amounts of pores and cracks were visible in the other groups. Additionally, after the three-point bending test, few residual porcelains could be observed on the surfaces of specimens in the control group. Conclusions: MAO treatment with 20 g/L MgSiF(6) on titanium can improve bonding strength between titanium and porcelain.

[Photoelastic analysis of the influence of prosthetic material on the stress distribution in bone around implant].

Objective: To provide a reference for a suitable alternative treatment choice for implant-supported prostheses, and to explore the influence of 3 types of prosthetic material on the stress distribution around implant. Methods: The implant-abutment analogs were embedded individually into photoelastic resin blocks, which were medical pure titanium castings reproducing the surface and outline of implant (diameter 4.3 mm, length 11.5 mm) and esthetic abutment (regular profile, 1 mm). The prostheses were divided into 3 groups according to the type of prosthetic material. Each group consisted of 5 samples. The samples of composite resin ceramic and zirconia group were milled by chair-side computer aided design and computer aided manufacture (CAD/CAM) system. The samples of porcelain-fused-to-metal crown group were made manually and a pre-arranged silicone rubber impression of CAD/CAM crown would guide to shape the veneer porcelain. Each set was submitted to a 300 N compressive load axially or obliquely (75°). The stress value in the peri-implant bone at the level of the neck, neck1/3, middle1/3 and root1/3 of the sections (0.5, 1.5, 2.5, 3.5 mm) from implant was analyzed by digital photoelasticity, and the stress cushioning effect of 3 types of prosthetic material was comprehensively evaluated. Results: The time spent reaching the stress peak of composite resin ceramic group [(1.58±0.08) s, axially; (2.75±0.21) s, obliquely] was larger than that of the zirconia group [(1.40±0.12) s, axially; (2.30±0.25) s, obliquely] (P<0.05) under the same download mode. Although there were no significant differences in equivalent stress values of the measurement points among the three groups (P>0.05), a downward trend of equivalent stress values of composite resin ceramic group was observed compared to zirconia group, regardless of load type. When loaded obliquely, the highest degree of stress concentration at the level of the neck of implant were found in the porcelain-fused-to-metal crown group. Conclusions: Within the limitations of this study, composite resin ceramic was more beneficial to the biomechanical behavior of implant in stress buffer compared to zirconia.