Experimental study on the construction of small three-dimensional tissue engineered grafts of electrospun poly-ε-caprolactone.

Studies on three-dimensional tissue engineered graft (3DTEG) have attracted great interest among researchers as they present a means to meet the pressing clinical demand for tissue engineering scaffolds. To explore the feasibility of 3DTEG, high porosity poly-ε-caprolactone (PCL) was obtained via the co-electrospinning of polyethylene glycol and PCL, and used to construct small-diameter poly-ε-caprolactone-lysine (PCL-LYS-H) scaffolds, whereby heparin was anchored to the scaffold surface by lysine groups. A variety of small-diameter 3DTEG models were constructed with different PCL layers and the mechanical properties of the resulting constructs were evaluated in order to select the best model for 3DTEGs. Bone marrow mononuclear cells were induced and differentiated to endothelial cells (ECs) and smooth muscle cells (SMCs). A 3DTEG (labeled '10-4%') was successfully produced by the dynamic co-culture of ECs on the PCL-LYS-H scaffolds and SMCs on PCL. The fluorescently labeled cells on the 3DTEG were subsequently observed by laser confocal microscopy, which showed that the ECs and SMCs were embedded in the 3DTEG. Nitric oxide and endothelial nitric oxide synthase assays showed that the ECs behaved normally in the 3DTEG. This study consequently provides a new thread to produce small-diameter tissue engineered grafts, with excellent mechanical properties, that are perfusable to vasculature and functional cells.

Self-alkali-activated self-cementation achievement and mechanism exploration for the synergistic treatment of the municipal solid waste incineration fly ashes and the arsenic-contaminated soils.

The feasibility and potential mechanisms of the self-alkali activation brought by municipal solid waste incineration (MSWI) fly ashes to the self-cementation of arsenic-contaminated soils were quantitatively evaluated and comprehensively analyzed to avoid the additional application of the alkali activators and binder materials traditionally. The employment of the two kinds of precursor materials achieved the self-alkali-activated self-cementation ('double self') under ambient conditions. The largest compressive strength (MPa) of 25.64 and lowest leaching toxicities (mg/L) of 21.05, 2.86, 0.08, 0.02, 2.05, and 0.34 for Zn, Cu, Cr, Cd, Pb, and As were obtained in the solidified matrix. Geopolymerization kinetics of the 'double self' cementation can be mathematically fitted by the Johnson-Mehl-Avrami-Kolmogorov model. CaClOH and halite in the MSWI fly ashes set up the self-alkali activation by reacting with the kaolinite and quartz in soils contaminated with arsenic by forming layered hydration and three-dimensional geopolymerization products to push for self-cementation.

Self-cementation of gold tailings activated by nonthermal plasma irradiated calcium (hydro)oxide.

The alkalinity of CaO is commonly insufficient in alkali-activating raw soils or minerals for the formation of cementation or geopolymerization. In this study, nonthermal plasma (NTP) irradiation was employed to activate traditional CaO to enhance its efficacy in alkali activation and further intensify the self-cementation of gold tailings. The solidification/stabilization (S/S) of the gold tailings-based matrix activated by NTP-CaO was better than that of CaO. The NTP irradiation enhanced the surface hydroxyl groups and oxygen atoms, decreased the binding energy, formed nanoparticles, and significantly changed the morphologies of the calcium activator. The dosage of the NTP-irradiated CaO (NTP-CaO) directly affected the self-cemented solidification/stabilization of gold tailings. The Johnson-Mehl-Avrami-Kolmogorov model was appropriate for analysing the NTP-CaO-activated geopolymerization kinetics of gold tailings. Three-dimensional (3D) structural minerals covered with small pores were determined in the NTP-CaO-activated cemented samples. The employment of NTP-CaO facilitated the formation of aluminosilicate geopolymers during the self-cementation of gold tailings according to comprehensive characterization strategies. The study achieves the efficient self-remediation of gold tailings by activating calcium precursors, which further solves the contradiction between salinization and alkali activation in the field of noncalcined cementitious materials.

Hyperlipidemia intensifies cerulein-induced acute pancreatitis associated with activation of protein kinase C in rats.

AIM: To investigate the effects of hyperlipidemia on acute pancreatitis (AP) and the possible mechanisms. METHODS: Rat models of hyperlipidemia and AP were established by Triton WR1339 and cerulein respectively. Human albumin was used to treat AP complicated by hyperlipidemia. In each group, we compared the histological score, volume of ascites, ratio of pancreatic wet/dry weight, serum amylase (AMY) and pancreatic acinar cell apoptosis. The level of protein kinase C (PKC) membrane translocation in pancreatic tissue was detected by Western blot. RESULTS: In the hyperlipidemia model established by Triton WR1339, triglyceride (TG) increased remarkably and reached its peak 6 h after injection, and most rats developed mild acute pancreatitis. Histological score, volume of ascites, ratio of wet/dry weight and serum AMY in AP animals with hyperlipidemia were obviously higher than those in AP animals (P < 0.05) and decreased after albumin therapy but not significantly (P > 0.05). Apoptotic cells detected by terminal deoxynucleotidyl transferase-mediated dUTP-biotin nick end labeling (TUNEL) increased in AP animals with hyperlipidemia and did not change distinctly after albumin therapy. PKC membrane translocation level increased in AP animals with hyperlipidemia and decreased remarkably after albumin therapy (P < 0.05). CONCLUSION: Hyperlipidemia may induce AP or intensify pancreatic injury. Albumin therapy can not alleviate pancreatic lesion effectively. PKC activation may be one mechanism by which AP is intensified by hyperlipidemia.

The Value of SPECT/CT in Monitoring Prefabricated Tissue-Engineered Bone and Orthotopic rhBMP-2 Implants for Mandibular Reconstruction.

Bone tissue engineering shows good prospects for mandibular reconstruction. In recent studies, prefabricated tissue-engineered bone (PTEB) by recombinant human bone morphogenetic proteins (rhBMPs) applied in vivo has found to be an effective alternative for autologous bone grafts. However, the optimal time to transfer PTEB for mandibular reconstruction is still not elucidated. Thus, here in an animal experiment of rhesus monkey, the suitable transferring time for PTEB to reconstruct mandibular defects was evaluated by 99mTc-MDP SPECT/CT, and its value in monitoring orthotopic rhBMP-2 implants for mandibular reconstruction was also evaluated. The result of SPECT/CT showed higher 99mTc-MDP uptake, indicating osteoinductivity, in rhBMP-2 incorporated demineralized freeze-dried bone allograft (DFDBA) and coralline hydroxyapatite (CHA) implants than those without BMP stimulation. 99mTc-MDP uptake of rhBMP-2 implant peaked at 8 weeks following implantation while CT showed the density of these implants increased after 13 weeks' prefabrication. Histology confirmed that mandibular defects were repaired successfully with PTEB or orthotopically rhBMP-2 incorporated CHA implants, in accordance with SPECT/CT findings. Collectively, data shows 99mTc-MDP SPECT/CT is a sensitive and noninvasive tool to monitor osteoinductivity and bone regeneration of PTEB and orthotopic implants. The PTEB achieved peak osteoinductivity and bone density at 8 to 13 weeks following ectopic implantation, which would serve as a recommendable time frame for its transfer to mandibular reconstruction.