The Safety of Neoadjuvant Therapy with Polyethylene Glycol Liposome Adriamycin Combined with Docetaxel in Patients with Breast Cancer Complicated by Axillary Lymph Node Metastasis.

Objective: To evaluate the safety of the combination of pegylated liposomal doxorubicin and docetaxel in neoadjuvant therapy for breast cancer (BC) with axillary lymph nodes metastasis. Methods: In this single-arm study, 91 patients with clinical stage IIA-IIIc BC received 6 cycles of pegylated liposomal doxorubicin plus docetaxel as neoadjuvant chemotherapy (NAC). Trastuzumab was allowed in patients with human epidermal growth factor receptor 2-positive tumors. The effects of new anthracycline-polyethylene glycol liposomal doxorubicin on the patients' hearts were studied. The changes in left ventricular ejection fraction (LVEF) before and after treatment were evaluated by echocardiography, and the levels of cardiac-specific biomarker troponin I (cTnI) and N terminal B natriuretic peptide (NT-pro-BNP) were noted before and after treatment. Result: In our study, 88 patients completed 6 cycles of neoadjuvant chemotherapy. LVEF was within normal range; average LVEF was 67% at baseline, 66% after NAC. The difference was not statistically significant. However, LVEF decreased by more than 10% in 44.4% of patients. There was no significant difference in troponin I or NT-pro-BNP levels before or after treatment. No cardiac events with clinical symptoms were reported. Conclusion: The combination of polyethylene glycol liposome adriamycin and docetaxel in neoadjuvant chemotherapy in patients with early BC with axillary lymph node metastasis has certain cardiac safety. And in the human epidermal growth factor receptor-2 (HER-2) positive population, polyethylene glycol liposome adriamycin combined with docetaxel and trastuzumab also has certain cardiac safety.

Application of a Modified Perforator Flap of the Transverse Facial Artery for Zygomaticofacial Skin Defect Repair After Tumor Resection.

BACKGROUND: The transverse facial artery is an important source of zygomaticofacial blood, but its perforator flap is rarely reported. The aim of this study was to investigate the utility of a modified perforator flap based on facial aesthetic units and previous anatomic studies of transverse facial arteries. METHODS: All 18 elderly patients with zygomatic facial tumors underwent Mohs surgery. The V-Y and propeller flaps were designed according to the aesthetic unit of the defect site. Only a small portion of the fascia and fat surrounding the blood vessel are left, the rest of the flap is pruned to a thickness closer to the surrounding tissues. The surgical effect was comprehensively evaluated by an expert group. To assess the patient's postoperative quality of life, we administered the FACT-H & N (v 4.0) scale before and after surgery. RESULTS: Among the 18 flaps, 10 were V-Y flaps and 8 were propeller flaps. The flaps of 18 patients survived, with adequate cheek, facial symmetry, and proper mouth opening. The flaps worked well and looked good at both the recipient and donor sites. According to the scale survey, the postoperative patients had a higher quality of life in terms of physiology, psychology, function, and other areas than the preoperative patients ( P <0.05). CONCLUSION: A modified flap of the transverse facial artery can rotate flexibly and repair a larger area, as the blood flow is relatively constant near the zygomatic arch. It has a high clinical value in the treatment of zygomaticofacial tumors.

Construction of Fusion Protein with Carbohydrate-Binding Module and Leaf-Branch Compost Cutinase to Enhance the Degradation Efficiency of Polyethylene Terephthalate.

Poly(ethylene terephthalate) (PET) is a manufactured plastic broadly available, whereas improper disposal of PET waste has become a serious burden on the environment. Leaf-branch compost cutinase (LCC) is one of the most powerful and promising PET hydrolases, and its mutant LCCICCG shows high catalytic activity and excellent thermal stability. However, low binding affinity with PET has been found to dramatically limit its further industrial application. Herein, TrCBM and CfCBM were rationally selected from the CAZy database to construct fusion proteins with LCCICCG, and mechanistic studies revealed that these two domains could bind with PET favorably via polar amino acids. The optimal temperatures of LCCICCG-TrCBM and CfCBM-LCCICCG were measured to be 70 and 80 °C, respectively. Moreover, these two fusion proteins exhibited favorable thermal stability, maintaining 53.1% and 48.8% of initial activity after the incubation at 90 °C for 300 min. Compared with LCCICCG, the binding affinity of LCCICCG-TrCBM and CfCBM-LCCICCG for PET has been improved by 1.4- and 1.3-fold, respectively, and meanwhile their degradation efficiency on PET films was enhanced by 3.7% and 24.2%. Overall, this study demonstrated that the strategy of constructing fusion proteins is practical and prospective to facilitate the enzymatic PET degradation ability.

Extracellular matrix in intervertebral disc: basic and translational implications.

Intervertebral disc (IVD) degeneration (IVDD) is the most common spinal disorder, which can lead to the symptoms of neck pain or low back pain. In healthy mature IVD tissues, extracellular matrix (ECM) complex possesses favorable biochemical and biomechanical properties, withstanding compression and torsion forces. IVD cells and ECM associate with each other to form a coordinated functional system. IVD cells are the main producers of ECM components, while ECM could modulate the viability and phenotype of IVD cells via direct interactions or indirect regulations. However, with the process of IVDD and ageing, ECM of IVD undergoes content loss and structure degeneration. Moreover, the accumulation of catabolic products may further deteriorate the IVD microenvironment. A better understanding of the physiology and the pathology of ECM within the IVD provides new insight into potential IVD regeneration strategies. Natural ECM components, functional motifs, or mimetic peptides are widely used in IVD repair by not only restoring structural support but also regulating cell fate and tissue microenvironment. Herein, we reviewed recent advances in the involvement of ECM in IVD health and disease, with an emphasis on ECM composition and organization, cell-matrix interactions, pathological ECM degradation, and promising matrix-based biomaterials for IVD regeneration.

First Report of Alternaria tenuissima Causing Brown Spot Disease of Angelica dahurica in China.

Angelica dahurica (Fisch. ex Hoffm.) is an abundantly cultivated Chinese herbal medicine plant in China with about 4000 hectares grown, the annual production is up to 24,000 tons. The medicinal part of A. dahurica is its root, and mainly function for treat cold, headache, toothache, rhinitis, diabetes, etc. Besides, A. dahurica is also used as a spice in Asia. In September 2018, brown spot was observed on the leaves of A. dahurica in fields of Anguo City, Hebei Province, China. In the field investigated, the incidence of brown spot disease reached 15%. The infected leaves showed brown spots surrounded with pale yellow edge, resulting in withered of the whole leaf. It seriously endangers the growth of A. dahurica, reducing the yield and quality of medicinal materials, even leading to the death of plants. We isolated the pathogen from 10 leaves with same lesions, the small square leaf pieces of approximately 3 to 5 mm were obtained with the sterile scissors from the junction of infected and healthy tissues, sterilized with sodium hypochlorite (10%) for 1 min followed by washing in sterile water for 3 times, then incubated on potato dextrose agar (PDA) plates at 25°C for 4 days. The culture was transferred to new PDA plates and was cultivated in dark at 25°C for 10 days. A total of 3 species of fungi were isolated, and only one fungus species has been found to be able to cause the original pathological characteristics of A. dahurica leaves through the back-grafting experiment. The mycelium was black and began to sporulate after 8 days on PDA media by single spore separation. Multiple spores joined together to form spores chain. The spores were spindle-shaped, yellow to yellow brown, and size ranged from 45 to 55 × 15 to 20 µm (n=50), with zero to three longitudinal septa and one to five transverse septa. For pathogenicity tests, the spore suspension (3.5×105 spores/mL) were inoculated to healthy plants grown in experimental field, the test was repeated four times, and 10 leaves were inoculated in each repetition, and the sterile water was inoculated as the blank control. Inoculated leaves were covered with transparent plastic bags for 24 h to keep humidity. Nine days later, it was found that there were lesions on the leaves inoculated with the pathogen, and the traits were the same as those in the field, while the controls are healthy. The fungus was consistently isolated from the inoculated leaves. The similar isolates were re-isolated from the inoculated and infected leaves and identified as Alternaria tenuissima by DNA sequencing, fulfilling Koch's postulates. Fungal genomic DNA was extracted from 7-day-old culture. PCR amplifications were performed using primers ITS1 / ITS4 and TEFF / TEFR respectively (Takahashi et al. 2006, Du 2008). The nucleotide sequence of PCR products, which have been deposited in Genebank under the accession numbers MN153514 and MN735428, showed 99.8%-100% identity with the corresponding sequences of A. tenuissima (MW194297 and MK415954). In order to further identify the pathogen species, we constructed a phylogenetic tree by combining TEF sequence and ITS sequence to distinguish the relationship between the pathogen and other minor species in the genus Alternaria, the isolate was clustered in the Alternaria clade. Therefore, the pathogen was identified as A. tenuissima based on the morphological characteristics and molecular identification. To our knowledge, this is the first report of A. tenuissima causing leaf spot on A. dahurica in China.

Hydroprinted Liquid-Alloy-Based Morphing Electronics for Fast-Growing/Tender Plants: From Physiology Monitoring to Habit Manipulation.

Monitoring physiological signals and manipulating growth habits of living plants in real time are important for botany research, biohybrid plant robots, and precision agriculture. Although emerging epidermal electronics that can conveniently acquire vital signals of living organisms exhibit a high potential for such scenarios, it is a significant challenge to adapt such devices for plants, because they are fragile and usually have complex surfaces that can change significantly during rapid growth. A gentle fabrication process is critical in order to employ compliant electronic systems to adapt to this highly dynamic situation. In this study, a hydroprinted liquid-alloy-based morphing electronics (LAME) process is employed for fast-growing plants that will sense physiological signals and even function as a biohybrid to determine plant behavior on demand. Besides various surfaces of inorganic targeting substrates, pinning liquid alloy circuits onto the complex plant epidermis is enhanced by introducing high-surface-energy liquid. Functionally, the new developed LAME can be used to monitor leaf moisture content and length, and manipulate leaf and bean sprout orientation. This study lays the foundation for a new form of morphing electronics for botany or biohybrid plant robots, potentially impacting the next generation of precision agriculture and smart hybrid robots.

Bacterial Cellulose-Alginate Composite Beads as Yarrowia lipolytica Cell Carriers for Lactone Production.

The demand for natural lactone gamma-decalactone (GDL) has increased in the fields of food and cosmetic products. However, low productivity during bioprocessing limits its industrial production. In this study, a novel composite porous cell carrier, bacterial cellulose-alginate (BC-ALG), was used for long-term biotransformation and production of GDL. The effects of this carrier on biotransformation and related mechanisms were investigated. BC-ALG carriers showed improved mechanical strength over ALG carriers, with their internal embedded cell pattern changed to an interconnected porous structure. In five repeated-batch biotransformation experiments, the maximum concentration of GDL obtained in culture with BC-ALG carriers was 8.37 g/L, approximately 3.7 times higher than that from the medium with an ALG carrier alone. The result indicated that multiple hydrogen bonding interactions at the interface between BC and ALG contributed to the compatibility and stability of BC-ALG carriers. On the basis of the above results, the BC-ALG composite carrier can be considered ideal for immobilisation of cells for the production of GDL on an industrial scale, and has the potential to be utilised in other biological processes.

Role of TiO2 Nanotubes on the Surface of Implants in Osseointegration in Animal Models: A Systematic Review and Meta-Analysis.

PURPOSE: This systematic review and meta-analysis aims to synthesize evidence relating to the effects of TiO2 nanotubes on osseointegration in animal models. MATERIALS AND METHODS: The focused question was "Does the preparation of TiO2 nanotubes on the surface of implants enhance osseointegration?" Searches were performed for relevant manuscripts up to September 2019 using the PubMed, Embase, Scopus and Google Scholar databases with terms such as "TiO2 nanotubes" in combination with "osseointegration", "osteogenic", "osteogenesis", and "bone regeneration". The titles, abstracts and full texts of the manuscripts were reviewed in accordance with the eligibility criteria. The meta-analysis were then performed to analyze the effects of TiO2 nanotubes in bone-implant contact (BIC) and biomechanical tests. RESULTS: Fourteen manuscripts were included for the systematic review and meta-analysis. Eleven studies showed that the results of a histological analysis, micro-CT evaluation and biomechanical tests were significantly higher near TiO2 than titanium. The meta-analysis demonstrating similar results in the BIC and biomechanical tests were obtained. The selected studies also showed the preferable nanotube diameter (70, 80, or 100 nm) to enhance osseointegration in BIC and/or bone area (BA). CONCLUSION: TiO2 nanotubes, especially those with large diameters, enhanced osseointegration near titanium implants. Compared to bare nanotubes, TiO2 nanotube composite coatings resulted in higher osteogenic ability.

The molecular mechanism study of insulin in promoting wound healing under high-glucose conditions.

BACKGROUND: Wound healing is a complex process in bone development. The aim of this study was to explore the molecular mechanism study of insulin in promoting wound healing. METHODS: Firstly, the acute human monocyte leukemia cell lines were induced to differentiate into macrophages. Secondly, the porphyromonas gingivalis was applied to mix with the differentiated macrophages. Thirdly, the effect of different concentrations of insulin (0 ng/mL, 5 ng/mL, 50 ng/mL, 100 ng/mL, 200 ng/mL, 500 ng/mL, and 1,000 ng/mL) on the phagocytosis of macrophages and production of reactive oxygen species was investigated. Depending on these experiments, the optimal insulin concentration was used to treat the macrophages at different time points (0 hours and 0.5 hours) to identify the differentially expressed mRNAs. Finally, functional analysis including gene ontology (GO) and the Kyoto Encyclopedia of Genes and Genomes (KEGG) and protein-protein interaction (PPI) analysis was carried out to explore the biological function of these differentially expressed mRNAs. RESULTS: The test of phagocytosis function and production of reactive oxygen species showed that 200 ng/mL insulin treatment had a significant influence on antibacterial and production of reactive oxygen species. In RNA sequencing, a total of 415 (245 upregulated and 170 downregulated) differentially expressed mRNAs were identified between different time points. Two important signaling pathways including endocytosis and systemic lupus erythematosus were found in the KEGG enrichment analysis. In the PPI network, several hub proteins encoded by differentially expressed mRNA including ALB, HIP1R, RAB5A, HIST1H2BJ, HIST1H3G, and HIST1H2BO were identified. CONCLUSION: Our work demonstrated that several differentially expressed mRNAs, such as EGR1, RAB34, ALB, HIP1R, RAB5A, HIST1H2BJ, HIST1H3G, and HIST1H2BO and two important signaling pathways including endocytosis and systemic lupus erythematosus may play important roles in the bone wound healing.

3D-Printed PCL/rGO Conductive Scaffolds for Peripheral Nerve Injury Repair.

The incidence of peripheral nerve injuries is on the rise and the current gold standard for treatment of such injuries is nerve autografting. Given the severe limitations of nerve autografts which include donor site morbidity and limited supply, neural guide conduits (NGCs) are considered as an effective alternative treatment. Conductivity is a desired property of an ideal NGC. Reduced graphene oxide (rGO) possesses several advantages in addition to its conductive nature such as high surface area to volume ratio due to its nanostructure and has been explored for its use in tissue engineering. However, most of the works reported are on traditional 2D culture with a layer of rGO coating, while the native tissue microenvironment is three-dimensional. In this study, PCL/rGO scaffolds are fabricated using electrohydrodynamic jet (EHD-jet) 3D printing method as a proof of concept study. Mechanical and material characterization of the printed PCL/rGO scaffolds and PCL scaffolds was done. The addition of rGO results in softer scaffolds which is favorable for neural differentiation. In vitro neural differentiation studies using PC12 cells were also performed. Cell proliferation was higher in the PCL/rGO scaffolds than the PCL scaffolds. Reverse transcription polymerase chain reaction and immunocytochemistry results reveal that PCL/rGO scaffolds support neural differentiation of PC12 cells.

[Effect of PEG400 on pharmacokinetics of baicalin and baicalein in gut microbiotadysbiosis rats].

The study aimed to establish an UPLC-MS/MS method for the determination of baicalin in rat plasma,in order to study the effect of PEG400 on pharmacokinetics of baicalin and baicalein in normal and gut microbiotadysbiosis rats. Plasma was precipitated with ethyl acetate and determined by UPLC-MS/MS method,with genistein as an internal standard. In terms of specificity,linearity,range,accuracy,precision and stability,the method was suitable for the determination of baicalin in plasma. The gut microbiotadysbiosis rat model was induced through the oral administration with lincomycin hydrochloride(5 g·kg-1·d-1) for one week. Samples of plasma of rats were obtained at different time points,after the rats were administrated with baicalin,baicalin and PEG400. Baicalin in rats were detected by UPLC-MS/MS method,and pharmacokinetic parameters were calculated by DAS 3. 2. 2 software. The results showed that the ß-glucosidase activity and the number of colonies in the feces of gut microbiotadysbiosis rats induced by lincomycin hydrochloride were significantly reduced. The Cmaxand AUC0-tof the baicalinand PEG400 group in the intestinal flora were significantly lower than those in the normal rat baicalin and PEG400 group. There was no significant difference in Cmaxand AUC0-tbetween the baicalin group and the baicalin+PEG400 group of gut microbiotadysbiosis rats. The Cmaxand AUC0-tof the normal rats baicalin group were significantly higher than those of the gut microbiotadysbiosis rats baicalin group and the baicalin + PEG400 group. There was no significant difference in Cmaxand AUC0-tbetween the normal rat baicalein and PEG400 group and the baicalein group. The Cmaxand AUC0-tof the baicalein group in the gut microbiotadysbiosis rats were lower than those in the normal baicalein group,but significantly higher than those in the baicalein and PEG400 group. PEG400 could increase the absorption of baicalin in normal rats,but is ineffective in gut microbiotadysbiosis rats,with no impact on the absorption of baicalein in rats.

An intelligent detecting system for permeability prediction of MBR.

The membrane bioreactor (MBR) has been widely used to purify wastewater in wastewater treatment plants. However, a critical difficulty of the MBR is membrane fouling. To reduce membrane fouling, in this work, an intelligent detecting system is developed to evaluate the performance of MBR by predicting the membrane permeability. This intelligent detecting system consists of two main parts. First, a soft computing method, based on the partial least squares method and the recurrent fuzzy neural network, is designed to find the nonlinear relations between the membrane permeability and the other variables. Second, a complete new platform connecting the sensors and the software is built, in order to enable the intelligent detecting system to handle complex algorithms. Finally, the simulation and experimental results demonstrate the reliability and effectiveness of the proposed intelligent detecting system, underlying the potential of this system for the online membrane permeability for detecting membrane fouling of MBR.

[Safety evaluation and risk control measures of Cassiae Semen].

In this study, the authors reviewed domestic and foreign literatures, conducted the textual research on origin and development of Cassia Semen, studied records in ancient books and ancient and modern literatures, clinical adverse reactions and relevant experimental studies in recent years, and summarized the clinical features and influencing factors related to the safety of Cassiae Semen. According to the findings,Cassia Semen's safety risks are mainly liver and kidney system damages, with the main clinical features of fatigue, anorexia, disgusting of oil, yellow urine and gray stool; digestive system injury, with the main clinical features of diarrhea, abdominal distension, nausea and loose stool; reproductive system damage, with the main clinical features of vaginal bleeding. Allergic reactions and clinical adverse events, with the main clinical features for numb mouth, itching skin, nausea and vomiting, diarrhea, wheezing and lip cyanosis were also reported. The toxicological studies on toxic components of Cassiae Semen obtusifolia were carried out through acute toxicity test, subacute toxicity test, subchronic toxicity test and chronic toxicity test. Risk factors might include patients, compatibility and physicians. Physicians should strictly abide by the medication requirements in the Pharmacopoeia, pay attention to rational compatibility, appropriate dosage,correct usage and appropriate processing, control the dosage below 15 g to avoid excessive intake, strictly control the course of treatment to avoid accumulated poisoning caused by long-term administration. At the same time, clinicians should pay attention to the latest research progress, update the knowledge structure, quickly find the latest and useful materials from clinical practice, scientific research and drug information and other literatures, make evaluation and judgment for the materials, establish a traditional Chinese medicine intelligence information library, and strengthen the control over adverse effects with a pre-warning consciousness. The authors suggested standardizing clinical medication of Cassiae Semen, and avoiding misuse or excessive use; clinicians should prescribe it in strict accordance with there commended usage and dosage in the Pharmacopoeia, and focus on the safety signal accumulation in clinic, while strengthening studies for toxic substance basis and toxicity mechanism, in order to give full play to Cassiae Semen's clinical efficacy and reduce its adverse reactions.

Oral immunization with recombinant enterovirus 71 VP1 formulated with chitosan protects mice against lethal challenge.

BACKGROUND: Enterovirus 71 (EV71) is the etiologic agent of hand-foot-and-mouth disease (HFMD) in the Asia-Pacific region, Many strategies have been applied to develop EV71 vaccines but no vaccines are currently available. Mucosal immunization of the VP1, a major immunogenic capsid protein of EV71, may be an alternative way to prevent EV71 infection. RESULTS: In this study, mucosal immunogenicity and protect function of recombinant VP1 protein (rVP1) in formulation with chitosan were tested and assessed in female ICR mouse model. The results showed that the oral immunization with rVP1 induced VP1-specific IgA antibodies in intestine, feces, vagina, and the respiratory tract and serum-specific IgG and neutralization antibodies in vaccinated mice. Splenocytes from rVP1-immunized mice induced high levels of Th1 (cytokine IFN-γ), Th2 (cytokine IL-4) and Th3 (cytokine TGF-ß) type immune responses after stimulation. Moreover, rVP1-immunized mother mice conferred protection (survival rate up to 30%) on neonatal mice against a lethal challenge of 103 plaque-forming units (PFU) EV71. CONCLUSIONS: These data indicated that oral immunization with rVP1 in formulation with chitosan was effective in inducing broad-spectrum immune responses and might be a promising subunit vaccine candidate for preventing EV71 infection.

Effects of aromatic compounds on the production of bacterial nanocellulose by Gluconacetobacter xylinus.

BACKGROUND: Bacterial cellulose (BC) is a polymeric nanostructured fibrillar network produced by certain microorganisms, principally Gluconacetobacter xylinus. BC has a great potential of application in many fields. Lignocellulosic biomass has been investigated as a cost-effective feedstock for BC production through pretreatment and hydrolysis. It is well known that detoxification of lignocellulosic hydrolysates may be required to achieve efficient production of BC. Recent results suggest that phenolic compounds contribute to the inhibition of G. xylinus. However, very little is known about the effect on G. xylinus of specific lignocellulose-derived inhibitors. In this study, the inhibitory effects of four phenolic model compounds (coniferyl aldehyde, ferulic acid, vanillin and 4-hydroxybenzoic acid) on the growth of G. xylinus, the pH of the culture medium, and the production of BC were investigated in detail. The stability of the phenolics in the bacterial cultures was investigated and the main bioconversion products were identified and quantified. RESULTS: Coniferyl aldehyde was the most potent inhibitor, followed by vanillin, ferulic acid, and 4-hydroxybenzoic acid. There was no BC produced even with coniferyl aldehyde concentrations as low as 2 mM. Vanillin displayed a negative effect on the bacteria and when the vanillin concentration was raised to 2.5 mM the volumetric yield of BC decreased to ~40% of that obtained in control medium without inhibitors. The phenolic acids, ferulic acid and 4-hydroxybenzoic acid, showed almost no toxic effects when less than 2.5 mM. The bacterial cultures oxidized coniferyl aldehyde to ferulic acid with a yield of up to 81%. Vanillin was reduced to vanillyl alcohol with a yield of up to 80%. CONCLUSIONS: This is the first investigation of the effect of specific phenolics on the production of BC by G. xylinus, and is also the first demonstration of the ability of G. xylinus to convert phenolic compounds. This study gives a better understanding of how phenolic compounds and G. xylinus cultures are affected by each other. Investigations in this area are useful for elucidating the mechanism behind inhibition of G. xylinus in lignocellulosic hydrolysates and for understanding how production of BC using lignocellulosic feedstocks can be performed in an efficient way.

Trophic transfer and biomagnification of microplastics through food webs in coastal waters: A new perspective from a mass balance model.

Since the 1950s, plastic pollution and its risk have been recognized as irreversible and nonnegligible problems as global plastic production has increased. In recent years, the transport and trophic transfer of microplastics (MPs) in biotic and abiotic environment have attracted extensive attention from researchers. In this study, based on the Ecotracer module from Ecopath with Ecosim (EwE) model, the marine ranching area of Haizhou Bay, Jiangsu Province, China, was taken as a case study by linking the environmental plastic inflow with MPs in organisms to simulate the variation of MPs in the marine food web for 20 years, as well as its potential trophic transfer and biomagnification. We found that the concentration of MPs in top consumers first increased when the concentration of MPs in the environment increased, while that in primary consumers first decreased when the concentration of MPs in the environment decreased. Moreover, high TL consumers had a stronger ability to accumulate MPs, and pelagic prey fishes was the opposite. From the perspective of the food web, all functional groups showed significant trophic magnification along with the trophic level and no biodilution. Generally, there is a direct relationship between the MPs in marine organisms and environmental inflow. If the pollutants flowing into the environment can be reduced, the MP pollution problem in coastal waters will be effectively alleviated. Our research can further provide a scientific basis for ecological risk assessment and management of MPs and biodiversity protection in marine ecosystems.

Distribution characteristics and ecological risk assessment of microplastics in intertidal sediments near coastal water.

Plastic products are widely distributed worldwide and continue to have a negative impact on the environment and organisms. Intertidal regions, which interface between upland and marine ecosystems, are regions of high ecological importance and serve as repositories for a variety of plastic wastes. However, ecological risk assessments of microplastics (MPs) in these transitional environments are still scarce. In this study, the morphological characteristics and spatial distribution of MPs in the intertidal surface sediments of Haizhou Bay were analyzed, and an ecological risk assessment framework for MPs was developed. Overall, the average abundance of MPs in the sediments was 2.31 ± 1.35 pieces/g dw. The size of the MPs was mainly less than 1 mm, and the main shape, color and polymer type of the MPs were mainly fibrous (58%), blue (30%), and PVC (22%), respectively. Cluster analyses showed that the sites could be well distinguished by size and polymer type but not by MP shape and color. According to the hazard scores, most of the sites in this area belonged to a risk level of IV, while the pollution loading index (PLI) showed that most of the sites belonged to a risk level of II. The ecological toxicity risk from the species-sensitive distribution (SSD) model showed that one-third of the sites had ecological MPs toxicity risks to marine organisms. We believe that normalized and standardized assessment methods should be implemented to monitor and manage the risk of MPs in the intertidal sediments. Particularly, the multiple dimensions, standard abundance of MPs, as well as MPs ingestion in the intertidal organisms, should be fully considered in the next step.

Fabrication of bio-based biodegradable poly(lactic acid) (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) composite foams for highly efficient oil-water separation.

The open-cell bio-based biodegradable polymer foams show good application prospect in dealing with the serious environmental issue caused by oil spill and organic solvents spills, while the cell structures and hydrophobic properties of the foams limit their performance. In this work, the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was selected to help prepare bio-based biodegradable poly(lactic acid) (PLA) foams. Based on a two-step foaming method, the crystallization ability of different samples was regulated by the "original crystals" together with PHBV in the foaming process, where skeleton structures were provided to facilitate the open-cell structures and promote their mechanical property. As illustrated, PHBV facilitated the formation of open-cell PLA foams, where the foams displayed superior oil-water separation capacity. The maximum volume expansion ratio of the foams was 80.08, the contact angle of deionized water reached to 134.5°, the adsorption capacity for oil or organic solvents was 10.8 g/g-51.8 g/g, and the adsorption capacity for CCl4 can still maintained 83.5 % of the initial value after 10 adsorption-desorption cycles. This work not only clarified the foaming mechanism of open-cell foams, but also provided a green and simple method for preparing bio-based biodegradable foams possessing excellent oil-water separation performance.

Polydopamine Adhesion: Catechol, Amine, Dihydroxyindole, and Aggregation Dynamics.

While polydopamine (PDA) possesses the surface-independent adhesion property of mussel-binding proteins, significant differences exist between them. Particularly, PDA's short and rigid backbone differs from the long and flexible protein sequence of mussel-binding proteins. Given that adhesion relies on achieving a conformal contact with large surface coverage, PDA has drawbacks as an adhesive. In our study, we investigated the roles of each building block of PDA to build a better understanding of their binding mechanisms. Initially, we anticipated that catecholamine oligomers form specific binding with substrates. However, our study showed that the universal adhesion of PDA is initiated by the solubility limit of growing oligomers by forming agglomerates, complemented by multiple binding modes of catechol. Notably, in the absence of amines, poly(catechol) either remained in solution or formed minor suspensions without any surface coating, underscoring the essential role of amines in the adhesion process by facilitating insoluble aggregate formation. To substantiate our findings, we induced poly(catechol) aggregation using quaternized poly(4-vinylpyridine) (qPVP), leading to subsequent surface adhesion upon agglomerate formation.

Four-component of double-layer infinite coordination polymer nanocomposites for large tumor trimodal therapy via multi high-efficiency synergies.

Multimodal /components tumors synergistic therapy is a crucial approach for enhancing comprehensive efficacy. Our research has identified lots of high efficiency synergies among four suitable components, revealing combinations with remarkably low combination index (CI) values (10-3-10-8). These combinations hold promise for large tumor powerful electrothermal-thermodynamic-multi-chemo trimodal therapy. To implement this approach, we developed four-component of double-layer infinite coordination polymer (ICP) nanocomposites, in which hypoxia-activated AQ4N and thermodynamic agent AIPH coordinated with Cu(Ⅱ) to form initial layer of positively charged ICPs-l NPs, chemotherapeutic agents gossypol-hyaluronic acid (G-HA) and CA4 coordinated with Fe(Ⅲ) to form out layer of negatively charged ICPs-2 NPs, then double-layer infinite coordination polymer nanocomposites (ICPs-1@ICPs-2 CNPs) were fabricated by electrostatic adsorption using ICPs-l NPs and ICPs-2 NPs. Cell experiments have extensively optimized the coordination combinations of the four components and the composition of the two layers. A programmable three-stage therapeutic procedure, assisted by a micro-electrothermal needle (MEN), was developed. Under this procedure the resulting nanocomposites demonstrate the powerful trimodal comprehensive therapeutic outcomes for large tumors using lower components dosage, achieving a tumor inhibition rate nearly reaching 100 % and no recurrence for 60 days. This study offers remarkable potential for tumor multimodal /components synergistic therapy in future.