The unique salt bridge network in GlacPETase: a key to its stability.

The extensive accumulation of polyethylene terephthalate (PET) has become a critical environmental issue. PET hydrolases can break down PET into its building blocks. Recently, we identified a glacial PET hydrolase GlacPETase sharing less than 31% amino acid identity with any known PET hydrolases. In this study, the crystal structure of GlacPETase was determined at 1.8 Å resolution, revealing unique structural features including a distinctive N-terminal disulfide bond and a specific salt bridge network. Site-directed mutagenesis demonstrated that the disruption of the N-terminal disulfide bond did not reduce GlacPETase's thermostability or its catalytic activity on PET. However, mutations in the salt bridges resulted in changes in melting temperature ranging from -8°C to +2°C and the activity on PET ranging from 17.5% to 145.5% compared to the wild type. Molecular dynamics simulations revealed that these salt bridges stabilized the GlacPETase's structure by maintaining their surrounding structure. Phylogenetic analysis indicated that GlacPETase represented a distinct branch within PET hydrolases-like proteins, with the salt bridges and disulfide bonds in this branch being relatively conserved. This research contributed to the improvement of our comprehension of the structural mechanisms that dictate the thermostability of PET hydrolases, highlighting the diverse characteristics and adaptability observed within PET hydrolases.IMPORTANCEThe pervasive problem of polyethylene terephthalate (PET) pollution in various terrestrial and marine environments is widely acknowledged and continues to escalate. PET hydrolases, such as GlacPETase in this study, offered a solution for breaking down PET. Its unique origin and less than 31% identity with any known PET hydrolases have driven us to resolve its structure. Here, we report the correlation between its unique structure and biochemical properties, focusing on an N-terminal disulfide bond and specific salt bridges. Through site-directed mutagenesis experiments and molecular dynamics simulations, the roles of the N-terminal disulfide bond and salt bridges were elucidated in GlacPETase. This research enhanced our understanding of the role of salt bridges in the thermostability of PET hydrolases, providing a valuable reference for the future engineering of PET hydrolases.

The correlation analysis between incisal guidance angle and occlusal plane angles and temporomandibular joint morphology.

OBJECTIVES: The correlations between the incisal guidance angle (IGA) and occlusal plane angles and temporomandibular joint (TMJ) morphology were investigated in adults with skeletal Class II division II malocclusion. MATERIALS AND METHODS: CBCT images of 37 patients were analyzed. It included 19 cases of skeletal Class II division II malocclusion with low angle (study group) and 18 cases of skeletal Class I average angle (control group). The Invivo Dental 5 software was employed to acquire the data of the incisal guidance angle (IGA), occlusal plane angle (FH-OP), anterior occlusal plane angle (FH-AOP) and the TMJ measurement items. RESULTS: The results of IGA, FH-AOP angle and FH-OP angle showed the study group > the control group (P < 0.05). There were statistically difference in the condylar mediolateral diameters, articular eminence inclination and height, and posterior joint spaces between two groups. No differences were revealed in the condylar anteroposterior diameters, the condylar inclination angle, condylar head width and height, condylar length, glenoid fossa depth and width between two groups. In the study group, IGA showed a moderate correlation with FH-AOP, a weak correlation with FH-OP and condylar mediolateral diameters. Meanwhile, there was a correlation between FH-AOP, FH-OP, and TMJ indicators. CONCLUSIONS: The IGA was not only related to FH-AOP and FH-OP, but also to the condylar mediolateral diameters. In addition, there was a correlation between the occlusal plane angles and TMJ morphology in skeletal Class II division II low angle malocclusion. CLINICAL RELEVANCE: For patients with skeletal Class II division II low angle malocclusion, adjusting the IGA and the occlusal plane angles could improve the esthetic appearance of the anterior teeth, occlusal function, and TMJ morphology.

[Bacterial Blocking and Repair of Intestinal Defects With Well-Alighed Lamellar MXene/Polyvinyl Alcohol Hydrogels Prepared by Bidirectional Freezing Method]. / 双向冷冻法制备的取向多层MXene/PVAæ°´å‡èƒ¶çš„ç»†èŒå±è”½ä½œç”¨åŠå¯¹è‚ é“ç¼ºæŸçš„ä¿®å¤.

Objective: To explore the bacterial blocking effect of oriented multilayer MXene/polyvinyl alcohol (PVA) nanocomposite hydrogels and their effect on the repair of intestinal defects. Methods: MXene/PVA nanocomposite hydrogels were prepared using the traditional freezing method and the bidirectional freezing ice template method. The structures of the different hydrogels were observed using scanning electron microscopy (SEM) and micro-CT reconstruction. The rheological properties of the hydrogels were measured using a dynamic rheometer, and their mechanical properties were assessed using a universal testing machine. The burst pressure of the hydrogels was determined through burst experiments, and bacterial colony growth was observed by the osmosis method to assess the bacteria blocking ability of the hydrogels in vitro. A rat model of cecal perforation was established, and the hydrogels were used for intestinal repair. Gram staining was performed to observe in vivo the bacterial blocking ability of the hydrogels, HE staining was performed to observe the intestinal inflammation, and CD31 and CD68 immunofluorescence staining and proliferating cell nuclear antigen (PCNA) staining were performed to observe the repair effect of the hydrogels on intestinal defects. Results: SEM and micro-CT reconstruction revealed that the hydrogel prepared by the traditional freezing method exhibited a random porous structure, while the hydrogel prepared by the bidirectional freezing method showed an oriented multilayer structure. Rheological and tensile tests indicated that the oriented hydrogel had superior mechanical properties, and the burst pressure of the oriented multilayer hydrogel was as high as 27 kPa, significantly higher than that of the non-oriented hydrogel (P<0.001). Bacterial colony growth was observed by the osmosis method and it was found that, compared with the non-oriented hydrogel, the oriented multilayer hydrogel could effectively prevent the infiltration of Escherichia coli and Staphylococcus aureus in vitro. Gram staining results showed that the oriented multilayer hydrogel could effectively block intestinal bacteria from entering the abdominal cavity in vivo. HE staining results showed that the oriented multilayer hydrogel could effectively reduce intestinal inflammation in vivo. CD31 and CD68 immunofluorescence staining and PCNA staining results showed that the oriented multilayer hydrogel had a repairing effect on intestinal defects in vivo. Conclusion: The oriented multilayer hydrogel prepared by bidirectional freezing effectively prevents bacterial infiltration and reduces intestinal inflammation.

Genome-wide analysis of the GLP gene family and overexpression of GLP1-5-1 to promote lignin accumulation during early somatic embryo development in Dimocarpus longan.

Longan (Dimocarpus longan Lour.) is an economically important subtropical fruit tree. Its fruit quality and yield are affected by embryo development. As a plant seed germination marker gene, the germin-like protein (GLP) gene plays an important role in embryo development. However, the mechanism underlying the role of the GLP gene in somatic embryos is still unclear. Therefore, we conducted genome-wide identification of the longan GLP (DlGLP) gene and preliminarily verified the function of DlGLP1-5-1. Thirty-five genes were identified as longan GLP genes and divided into 8 subfamilies. Based on transcriptome data and qRT‒PCR results, DlGLP genes exhibited the highest expression levels in the root, and the expression of most DlGLPs was upregulated during the early somatic embryogenesis (SE) in longan and responded to high temperature stress and 2,4-D treatment; eight DlGLP genes were upregulated under MeJA treatment, and four of them were downregulated under ABA treatment. Subcellular localization showed that DlGLP5-8-2 and DlGLP1-5-1 were located in the cytoplasm and extracellular stroma/chloroplast, respectively. Overexpression of DIGLP1-5-1 in the globular embryos (GEs) of longan promoted the accumulation of lignin and decreased the H2O2 content by regulating the activities of ROS-related enzymes. The results provide a reference for the functional analysis of DlGLPs and related research on improving lignin accumulation in the agricultural industry through genetic engineering.

Bioactive fatty acid analog-derived hybrid nanoparticles confer antibody-independent chemo-immunotherapy against carcinoma.

Typical chemo-immunotherapy against malignant carcinoma, is characterized by the combined application of chemotherapeutic agents and monoclonal antibodies for immune checkpoint blockade (ICB). Temporary ICB with antibodies would not depress tumor intrinsic PD-L1 expression and potential PD-L1 adaptive upregulation during chemotherapy, thus exerting limited immunotherapy efficacy. Herein, we developed novel polymer-lipid hybrid nanoparticles (2-BP/CPT-PLNs) for inducing PD-L1 degradation by inhibiting palmitoylation with bioactive palmitic acid analog 2-bromopalmitate (2-BP) to replace PD-L1 antibody (αPD-L1) for ICB therapy, thus achieving highly efficient antitumor immune via immunogenic cell death (ICD) induced by potentiated chemotherapy. GSH-responsive and biodegradable polymer-prodrug CPT-ss-PAEEP10 assisted as a cationic helper polymer could help to stabilize 2-BP/CPT-PLNs co-assembled with 2-BP, and facilitate the tumor site-specific delivery and intracellular release of water-insoluble camptothecin (CPT) in vivo. 2-BP/CPT-PLNs would reinforce cytotoxic CD8+ T cell-mediated antitumor immune response via promoting intratumoral lymphocytes cells infiltration and activation. 2-BP/CPT-PLNs significantly prevented melanoma progression and prolonged life survival of mice beyond the conventional combination of irinotecan hydrochloride (CPT-11) and αPD-L1. Our work first provided valuable instructions for developing bioactive lipid analogs-derived nanoparticles via lipid metabolism intervention for oncotherapy.

L-serine combined with carboxymethyl chitosan guides amorphous calcium phosphate to remineralize enamel.

The aim of this study is to investigate a robust and stable calcium-phosphorus system to remineralize human early enamel caries lesions with nanocomplexes of carboxymethyl chitosan/L-serine/amorphous calcium phosphate (CMC-Ser-ACP) to develop an effective method for mimicking the amelogenin (AMEL) mineralization pattern through ACP assembly. A CMC-Ser-ACP nanocomplex solution was first synthesized by a chemical precipitation method, and then 1% sodium hypochlorite (NaClO) was added to induce ACP phase formation. The morphologies of the nanocomplexes were characterized by transmission electron microscopy (TEM), and zeta potential analysis and Fourier transform infrared spectroscopy (FTIR) were performed to detect surface charge and functional group changes. The subtle changes of the demineralized enamel models induced by the remineralization effect were observed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The CMC-Ser-ACP nanocomplex solution could be preserved without any precipitation for 45 days. After the application of NaClO and through the guidance of Ser, ACP nanoparticles transformed into relatively orderly arranged hydroxyapatite (HAP) crystals, generating an aprismatic enamel-like layer closely integrated with the demineralized enamel, which resulted in enhanced mechanical properties for the treatment of early enamel caries lesions. The CMC-Ser-ACP nanocomplex solution is a remineralization system with great solution stability, and when NaClO is added, it can rapidly regenerate an aprismatic enamel-like layer in situ on the demineralized enamel surface. This novel remineralization system has stable chemical properties and can greatly increase the therapeutic effects against early enamel caries.

Association between the occurrence of buccally displaced canine and palatal and craniofacial morphology in adolescents.

The main objective of the present research study is to evaluate the association between the occurrence of buccally displaced canine (BDC) and the palatal as well as the craniofacial morphology in adolescents in accordance at the early permanent dentition. As the experimental group, 100 adolescents of Chinese ethnicity (mean age 13.05 years) with crowding and buccally displaced canine (BDC-c) were selected in comparison with the same number of candidates (mean age 12.59 years) without BDC and crowding as control group. Digital dental casts and cephalograms were collected for three dimensional (3D) and cephalometric measurements. An independent sample T-test was used to compare the cephalometric values between the two groups. Logistic regression as commonly statistical methods used in empirical study including categorical dependent variables was used to identify the joint effects of the dental variables' 3D measurements. When comparing the groups with above analysis, patients with BDC showed a statistically significant narrower and higher palatal vault. For the cephalometric variables, the anterior cranial base length, sagittal position of the maxilla (SNA), sagittal position of the mandible (SNB), and skeletal relationship between maxilla and mandible (ANB) appeared to be smaller, whilst palatal plane angle (SN-PP), Frankfort-mandibular plane angle (FMA), anterior facial height, and lower facial height were larger in BDC-c control group (p < 0.05). A smaller inter-first premolar width was significant in the prediction model (p = 0.002). This study highlights that BDC-c participants in early permanent dentition exhibited a narrower dental arch and higher palatal vault, of which a smaller inter-first premolar width would significantly increase the occurrence of BDC.

Solvent-Type Passivation Strategy Controls Solid-State Self-Quenching-Resistant Behavior in Sulfur Dots.

Treatment of sulfur dots with polyethylene glycol (PEG) has been an efficient way to achieve a high luminescence quantum yield, and such a PEG-related quantum dot (QD)-synthesis strategy has been well documented. However, the polymeric insulating capping layer acting as the "thick shell" will significantly slow down the electron-transfer efficiency and severely hamper its practical application in an optoelectric field. Especially, the employment of synthetic polymers with long alkyl chains or large molecular weights may lead to structural complexity or even unexpected changes of physical characteristics for QDs. Therefore, in sulfur dot preparation, it is a breakthrough to use short-chain molecular species to replace PEG for better control and reproducibility. In this article, a solvent-type passivation (STP) strategy has been reported, and no PEG or any other capping agent is required. The main role of the solvent, ethanol, is to directly react with NaOH, and the generated sodium ethoxide passivates the surface defects. The afforded STP-enhanced emission sulfur dots (STPEE-SDs) possess not only the self-quenching-resistant feature in the solid state but also the extension of fluorescence band toward the wavelength as long as 645 nm. The realization of sulfur dot emission in the deep-red region with a decent yield (8.7%) has never been reported. Moreover, a super large Stokes shift (300 nm, λex = 345 nm, λem = 645 nm) and a much longer decay lifetime (109 µs) have been found, and such values can facilitate to suppress the negative influence from background signals. Density functional theory demonstrates that the surface passivation via sodium ethoxide is dynamically favorable, and the spectroscopic insights into emission behavior could be derived from the passivation effect of the sulfur vacancy as well as the charge-transfer process dominated by the highly electronegative ethoxide layer.

The effects of cortical bone thickness and miniscrew implant root proximity on the success rate of miniscrew implant: A retrospective study.

OBJECTIVE: To investigate the effects of cortical bone thickness (CBT), miniscrew implant root proximity (MRP) and other related factors on the success rate of miniscrew implant (MSI). MATERIALS AND METHODS: Four hundred and five MSIs placed in 171 patients were analysed in this retrospective study. The primary predictor variables were CBT and MRP at MSI insertion sites. The predictor variables also included patient, location, MSI design and procedure related factors. The outcome variable was the survival of MSI. The differences in measurement data between success group and failed group were evaluated by the analysis of variance and independent samples t tests. Patient, location, MSI design and procedure related factors associated with the MSI prognosis were analysed by survival analysis with Cox proportional hazard regression model. The P value was set at .05. And the survival curves of independent factors were plotted. RESULTS: The overall success rate of MSI was 82.7%. The age of MSI host, CBT, interdental root distance (IRD) and MRP at MSI sites showed no significant differences between failed group and success group. CBT and insertion jaws were independent prognosis factors screened out by Cox proportional hazard regression model. Failure risk (hazard ratio) of MSI with CBT <1 mm was 4.72. The failure risk in the mandible was 3.80 times as high as that in the maxilla. CONCLUSION: Inadequate CBT (<1 mm) contributed to the failure of MSI. MSI placed in the maxilla showed better prognosis compared to the mandible. MRP had no significant effect on the prognosis.

Fucoidan inhibits tooth movement by promoting restorative macrophage polarization through the STAT3 pathway.

Retention after treatment and effective anchorage control are two essential factors in orthodontics. Our study aimed to explore the effects of fucoidan on orthodontic tooth movement (OTM) and the involvement of macrophages. We established a murine OTM model to test the effect of fucoidan administration. We found that mice injected with fucoidan had a deceleration in OTM and a higher bone mineral density. Moreover, fucoidan increased the proportion of F4/80+ CD206+ macrophages and promoted the messenger RNA expression of Arg-1, CD206, and IL-10 at both in vivo and in vitro levels. In addition, macrophages showed lower expression of TNF-α, IL-1ß, and IL-6 and a decrease in F4/80+ CD11c+ cells. Mechanistically, the level of phosphorylated STAT3 was elevated in unpolarized and restorative macrophages after treatment with fucoidan. Taken together, our findings suggest that fucoidan treatment inhibits OTM and enhances the stability of teeth after movement by promoting restorative macrophages through the STAT3 pathway.

Exosomes from EV71-infected oral epithelial cells can transfer miR-30a to promote EV71 infection.

OBJECTIVE: As an extracellular vesicle, exosomes can release from virus-infected cells containing various viral or host cellular elements and could stimulate recipient's cellular response. Enterovirus 71 (EV71), a single-strand positive-sense RNA virus, is known to cause hand, foot, and mouth disease (HFMD) in children and bring about severe clinical diseases. METHODS: Separated the human oral epithelial cells (OE cells) from normal buccal mucosa through enzyme digestion. Performed a comprehensive miRNA profiling in exosomes from EV71-infected OE cells through deep small RNA-seq. Using the Human Antiviral Response RT Profiler PCR Array profiles to explore the interactions of innate immune signaling networks with exosomal miR-30a. Knocked out the MyD88 gene in macrophages using CRISPR/Cas9-mediated genome editing method. RESULTS: Our study demonstrated that the miR-30a was preferentially enriched in exosomes that released from EV71-infected human oral epithelial cells through small RNA-seq. We found that the transfer of exosomal miR-30a to macrophages could suppress type Ⅰ interferon response through targeting myeloid differentiation factor 88 (MyD88) and subsequently facilitate the viral replication. CONCLUSIONS: Exosomes released from EV71-infected OE cells selectively packaged high level of miR-30a that can be functionally transferred to the recipient macrophages resulted in targeting MyD88 and subsequently inhibited type I interferon production in receipt cells, thus promoting the EV71 replication.

Procyanidin B2-3'-O-Gallate Derived from Grape Seed Polymeric Procyanidins via the Galloyl-Attached Nucleophilic Degradation as a Potential Hepatoprotective Agent.

An effective method was developed for preparing galloylated procyanidins (GPCs) using galloyl-attached nucleophilic degradation. Under degradation conditions optimized through Box-Behnken design and single-factor experiments, two dimeric and three tetrameric GPCs were produced, with the yield of procyanidin B2-3'-O-gallate (B2-3'-G) reaching up to 232 mg/g (PPCs). The structure of B2-3'-G was identified by UV, FTIR, NMR, CD, MS, and phloroglucinolysis. Furthermore, the protective effect of B2-3'-G against alcohol-induced liver injury (ALI) was investigated. Compared with the parent compounds, B2-3'-G exhibited a stronger capacity for inhibiting ALI, attributed to its polymerization degree and galloyl group. Subsequent experiments revealed that the pretreatment of BRL-3A cells with B2-3'-G prior to ethanol improved ALI through activation of the Nrf2-HO-1/NQO1 pathway and initiation of enzymatic antioxidant systems. These findings suggest that GPC B2-3'-G is a potential hepatoprotective agent, which provides a new perspective for functional development of GPCs.

A Gas Therapy Strategy for Intestinal Flora Regulation and Colitis Treatment by Nanogel-Based Multistage NO Delivery Microcapsules.

Current approaches to treating inflammatory bowel disease focus on the suppression of overactive immune responses, the removal of reactive intestinal oxygen species, and regulation of the intestinal flora. However, owing to the complex structure of the gastrointestinal tract and the influence of mucus, current small-molecule and biologic-based drugs for treating colitis cannot effectively act at the site of colon inflammation, and as a result, they tend to exhibit low efficacies and toxic side effects. In this study, nanogel-based multistage NO delivery microcapsules are developed to achieve NO release at the inflammation site by targeting the inflammatory tissues using the nanogel. Surprisingly, oral administration of the microcapsules suppresses the growth of pathogenic bacteria and increases the abundance of probiotic bacteria. Metabolomics further show that an increased abundance of intestinal probiotics promotes the production of metabolites, including short-chain fatty acids and indole derivatives, which modulate the intestinal immunity and restore the intestinal barrier via the interleukin-17 and PI3K-Akt signaling pathways. This work reveals that the developed gas therapy strategy based on multistage NO delivery microcapsules modulates the intestinal microbial balance, thereby reducing inflammation and promoting intestinal barrier repair, ultimately providing a new therapeutic approach for the clinical management of colitis.

Occurrence and variations of five classes of antibiotic resistance genes along the Jiulong River in southeast China.

Antibiotic resistance genes (ARGs) are emerging microbial hazards threatening human health. Many factors, including urban and agricultural activities and water environment changes, can significantly impact the variations of ARGs. An investigation on the occurrence and variations of ARGs in the Jiulong River was done in this study. The water samples were collected from 16 sites ranging from the upper branch to the river mouth of the Jiulong River, in both low- and high-flow periods. Eleven ARG families were tested and quantified by real-time PCR (SYBR Green) methods, and detection assays were conducted for tetA, tetG, aacC1, strA, ermB, cmlA5, vanA, dfrA1, sulll, blaTEM-1 and blaoxa-1 genes. Results showed that nine ARG families were found, then the swine industry and urban activities, including sewage discharge, might be responsible for the high levels of concentrations and relative abundances of ARGs, and the increase of salinity might decrease the relative abundances of ARGs. In addition, some ARG abundances were significantly correlated to the concentrations of NH4+ and PO4(3-), particularly in the high-flow period. The human activities were important sources for ARGs in the Jiulong River, which have already become a threat to the safety of drinking water for the nearby cities.

Nitrocellulose membranes in situ grown with Prussian blue nanoparticles as stable nanozyme pads for colorimetric detection of dopamine.

Prussian blue (PB) is a typical peroxidase mimic with simple preparation, low cost and high eco-friendliness, but it still has drawbacks of poor stability (e.g., decomposition in aqueous dispersions) and intrinsic optical interference (e.g., high extinction coefficient over a wide wavelength range) in colorimetric assays. Herein, we used nitrocellulose (NC) membranes as synthesis hosts of PB nanoparticles (NPs) to develop a new type of three-dimensional (3D) porous nanozyme pad. By means of an in situ synthesis route, PB NPs were uniformly grown on the surfaces of the fiber scaffolds with desirable stability, which also avoided signal interference from PB NPs owing to the easy handling of the pads in a quantitative solid state. The pads showed significant peroxidase-mimicking activity toward the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) with the output of colorimetric signals. Based on the reduction of oxidized TMB (oxTMB) by dopamine (DA), the pads were exploited for simple and quantitative colorimetric detection of DA with a limit of detection (LOD) of 0.59 µM and a satisfactory accuracy for analysis of real human urine samples. This is the first attempt at exploiting NC membranes as the synthesis hosts to develop nanozyme pads, which solves the above drawbacks of traditional PB-based peroxidase mimics and has promise for various colorimetric bioanalyses, given the structural benefits of NC membranes and their broad applications in biosensors.

Imaging Structural and Electrical Changes of Aging Cells Using Scanning Ion Conductance Microscopy.

The local charge density and distribution of extracellular membranes play a crucial role in the various cellular processes, such as regulation and localization of membrane proteins, electrophysiological signal transduction, transcriptional control, cell growth, and cell death. In this study, a novel scanning ion conductance microscopy-based method is employed to extracellular membrane mapping. This method allows to not only visualize the dynamic topography and surface charge distribution around individual cells, but also distinguish the charge difference. To validate the accuracy and effectiveness of this method, the charge density on model sample surfaces are initially manipulated and the charge sensing mechanism using finite element modeling (FEM) is explored subsequently. By applying this method, both the extracellular charge distributions and topography structures of normal and senescent human dental pulp stem cells (hDPSCs) are able to monitor. Interestingly, it is observed that the surface charge became significantly more negative after cellular senescence. This innovative approach enables us to gain valuable insights into surface charge changes during cellular senescence, which can contribute to a better understanding of the underlying mechanisms and potential therapeutic strategies for age-related diseases.

A healing promoting wound dressing with tailor-made antibacterial potency employing piezocatalytic processes in multi-functional nanocomposites.

Developing a novel antibiotics-free antibacterial strategy is essential for minimizing bacterial resistance. Materials that not only kill bacteria but also promote tissue healing are especially challenging to achieve. Inspired by chemical conversion processes in living organisms, we develop a piezoelectrically active antibacterial device that converts ambient O2 and H2O to ROS by piezocatalytic processes. The device is achieved by mounting nanoscopic polypyrrole/carbon nanotube catalyst multilayers onto piezoelectric-dielectric films. Under stimuli by a hand-held massage device, the sterilizing rates for S. aureus and E. coli reach 84.11% and 94.85% after 10 minutes of operation, respectively. The antibacterial substrate at the same time preserves and releases drugs and presents negligible cytotoxicity. Animal experiments demonstrate that daily treatment for 10 minutes using the device effectively accelerates the healing of infected wounds on the backs of mice, promoting hair follicle generation and collagen deposition. We believe that this report provides a novel design approach for antibacterial strategies in medical treatment.

CCR2+ Macrophages Promote Orthodontic Tooth Movement and Alveolar Bone Remodeling.

During mechanical force-induced alveolar bone remodeling, macrophage-mediated local inflammation plays a critical role. Yet, the detailed heterogeneity of macrophages is still unknown. Single-cell RNA sequencing was used to study the transcriptome heterogeneity of macrophages during alveolar bone remodeling. We identified macrophage subclusters with specific gene expression profiles and functions. CellChat and trajectory analysis revealed a central role of the Ccr2 cluster during development, with the CCL signaling pathway playing a crucial role. We further demonstrated that the Ccr2 cluster modulated bone remodeling associated inflammation through an NF-κB dependent pathway. Blocking CCR2 could significantly reduce the Orthodontic tooth movement (OTM) progression. In addition, we confirmed the variation of CCR2+ macrophages in human periodontal tissues. Our findings reveal that mechanical force-induced functional shift of the Ccr2 macrophages cluster mediated by NF-κB pathway, leading to a pro-inflammatory response and bone remodeling. This macrophage cluster may represent a potential target for the manipulation of OTM.

Nanofibrillar Poly(vinyl alcohol) Ionic Organohydrogels for Smart Contact Lens and Human-Interactive Sensing.

Hydrogel bioelectronics as one of the next-generation wearable and implantable electronics ensures excellent biocompatibility and softness to link the human body and electronics. However, volatile, opaque, and fragile features of hydrogels due to the sparse and microscale three-dimensional network seriously limit their practical applications. Here, we report a type of smart and robust nanofibrillar poly(vinyl alcohol) (PVA) organohydrogels fabricated via one-step physical cross-linking. The nanofibrillar network cross-linked by numerous PVA nanocrystallites enables the formation of organohydrogels with high transparency (90%), drying resistance, high toughness (3.2 MJ/m3), and tensile strength (1.4 MPa). For strain sensor application, the PVA ionic organohydrogel after soaking in NaCl solution shows excellent linear sensitivity (GF = 1.56, R2 > 0.998) owing to the homogeneous nanofibrillar PVA network. We demonstrate the potential applications of the nanofibrillar PVA-based organohydrogel in smart contact lens and emotion recognition. Such a strategy paves an effective way to fabricate strong, tough, biocompatible, and ionically conductive organohydrogels, shedding light on multifunctional sensing applications in next-generation flexible bioelectronics.

[Determination of twenty pesticide residues in Viscum coloratum by gas chromatography using cloud-point extraction].

OBJECTIVE: To establish a gas chromatography method for simultaneous determination of organochlorine and pyrethroid pesticide residues in Viscum coloratum by cloud-point extraction (CPE). METHOD: Pesticides were extracted with the non-ionic surfactant Triton X-100. The apparatus was gas chromatography with electron capture detector and the separation was performed on an Hp-5 column. The pesticide residues were calculated by external standard method. RESULT: Good linear relation was obtained over the range of 5-500 microg L(-1) for organochlorine and 10-1,000 microg L(-1) for pyrethroid. The limits of detection was 1.5-7.5 microg kg(-1). The average recoveries of organochlorine and pyrethroid were 74.15% -111.6% with corresponding RSD of 4.0% -9.1%. CONCLUSION: The sample and rapid method was applied to pesticide residues determination.