Janus Iron Oxides @ Semiconducting Polymer Nanoparticle Tracer for Cell Tracking by Magnetic Particle Imaging.

Iron oxides nanoparticles tailored for magnetic particle imaging (MPI) have been synthesized, and their MPI signal intensity is three-times that of commercial MPI contrast (Ferucarbotran, also called Vivotrax) and seven-times that of MRI contrast (Feraheme) at the same Fe concentration. MPI tailored iron oxide nanoparticles were encapsulated with semiconducting polymers to produce Janus nanoparticles that possessed optical and magnetic properties for MPI and fluorescence imaging. Janus particles were applied to cancer cell labeling and in vivo tracking, and as few as 250 cells were imaged by MPI after implantation, corresponding to an amount of 7.8 ng of Fe. Comparison with MRI and fluorescence imaging further demonstrated the advantages of our Janus particles for MPI-super sensitivity, unlimited tissue penetration, and linear quantitativity.

Small molecule-initiated light-activated semiconducting polymer dots: an integrated nanoplatform for targeted photodynamic therapy and imaging of cancer cells.

Photodynamic therapy (PDT) is a noninvasive and light-activated method for cancer treatment. Two of the vital parameters that govern the efficiency of PDT are the light irradiation to the photosensitizer and visual detection of the selective accumulation of the photosensitizer in malignant cells. Herein, we prepared an integrated nanoplatform for targeted PDT and imaging of cancer cells using folic acid and horseradish peroxidase (HRP)-bifunctionalized semiconducting polymer dots (FH-Pdots). In the FH-Pdots, meta-tetra(hydroxyphenyl)-chlorin (m-THPC) was used as photosensitizer to produce cytotoxic reactive oxygen species (ROS); fluorescent semiconducting polymer poly[2-methoxy-5-((2-ethylhexyl)oxy)-p-phenylenevinylene] was used as light antenna and hydrophobic matrix for incorporating m-THPC, and amphiphilic Janus dendrimer was used as a surface functionalization agent to conjugate HRP and aminated folic acid onto the surface of FH-Pdots. Results indicated that the doped m-THPC can be simultaneously excited by the on-site luminol-H2O2-HRP chemiluminescence system through two paths. One is directly through chemiluminescence resonance energy transfer (CRET), and the other is through CRET and subsequent fluorescence resonance energy transfer. In vitro PDT and specificity studies of FH-Pdots using a standard transcriptional and translational assay against MCF-7 breast cancer cells, C6 glioma cells, and NIH 3T3 fibroblast cells demonstrated that cell viability decreased with increasing concentration of FH-Pdots. At the same concentration of FH-Pdots, the decrease in cell viability was positively relevant with increasing folate receptor expression. Results from in vitro fluorescence imaging exhibited that more FH-Pdots were internalized by cancerous MCF-7 and C6 cells than by noncancerous NIH 3T3 cells. All the results demonstrate that the designed semiconducting FH-Pdots can be used as an integrated nanoplatform for targeted PDT and on-site imaging of cancer cells.

Hypercrosslinking porous polymer layers on TiO2-graphene photocatalyst: Enhanced adsorption of water pollutants for efficient degradation.

Solar-driven photocatalysis offers an environmentally friendly and sustainable approach for the degradation of organic pollutants in water without chemical additives, but the low specific surface area and adsorption capacity of common photocatalysts restricts the surface reactions with the contaminants. Herein, we hypercrosslinked polymer layers on TiO2-graphene surface to enlarge the specific surface area from 136 to 988 m2/g, leading to a high adsorption capacity of sulfadiazine as 54.3 mg/g, which is 15.5 times that of TiO2-graphene (3.5 mg/g). The adsorption kinetics reveals the combination of physical and chemical adsorption by porous benzene-based polymer for sulfadiazine enrichment. Besides, the polymer layers with broad light absorption enable the composite to function efficiently as visible-light-driven photocatalysts. Thus, the as-designed composite exhibits excellent performance for sulfadiazine removal by integrating the adsorptive and photocatalytic processes, especially for the diluted sulfadiazine solution. More importantly, the porous polymer layer can function as a filter for weakening the interference of TiO2 surface with the natural matters from complex water matrices. Based on the identification of dominant reactive species, the possible attacking pathway and the sulfadiazine subsequent degradation are presented. Further, the enhanced adsorption and photodegradation efficiency can also be achieved for the removal of other typical pollutants such as 4-chlorophenol and methylene blue. This study highlights an adsorption-enhanced-degradation mechanism for water pollutants that can direct the design of high-performance photocatalysts under visible light.

Fabrication of reversible poly(dimethylsiloxane) surfaces via host-guest chemistry and their repeated utilization in cardiac biomarker analysis.

On the basis of the host-guest interactions between azobenzenes and cyclodextrins, a new strategy for the preparation of a dually functionalized poly(dimethylsiloxane) (PDMS) surface was investigated using surface-initiated atom-transfer radical polymerization (SI-ATRP) and click chemistry. The PDMS substrates were first oxidized in a H(2)SO(4)/H(2)O(2) solution to transform the surface Si-CH(3) groups into Si-OH groups. Then, the SI-ATRP initiator 3-(2-bromoisobutyramido)propyl(trime-thoxy)silane was grafted onto the substrates through a silanization reaction. Sequentially, the poly(ethylene glycol) (PEG) units were introduced onto the PDMS-Br surfaces via SI-ATRP reaction using oligo(ethylene glycol) methacrylate. Afterward, the bromide groups on the surface were converted to azido groups via nucleophilic substitution reaction with NaN(3). Finally, the azido-grafted PDMS surfaces were subjected to a click reaction with alkynyl and PEG-modified ß-cyclodextrins, resulting in the grafting of cyclodextrins onto the PDMS surfaces. The composition and chemical state of the modified surfaces were characterized via X-ray photoelectron spectroscopy, and the stability and dynamic characteristics of the cyclodextrin-modified PDMS substrates were investigated via attenuated total reflection-Fourier transform infrared spectroscopy and temporal contact angle experiments. The surface morphology of the modified PDMS surfaces was characterized through imaging using a multimode atomic force microscope. A protein adsorption assay using Alexa Fluor594-labeled bovine serum albumin, Alexa Fluor594-labeled chicken egg albumin, and FITC-labeled lysozyme shows that the prepared PDMS surfaces possess good protein-repelling properties. On-surface studies on the interactions between azobenzenes and the cyclodextrin-modified surfaces reveal that the reversible binding of azobenzene to the cyclodextrin-modified PDMS surfaces and its subsequent release can be reversibly controlled using UV irradiation. Sandwich fluoroimmunoassay of the cardiac markers myoglobin and fatty acid-binding protein demonstrates that the cyclodextrin-modified PDMS surfaces can be repeatedly utilized in disease biomarker analysis.

Folate-decorated hybrid polymeric nanoparticles for chemically and physically combined paclitaxel loading and targeted delivery.

In this study, folate-functionalized hybrid polymeric nanoparticles (NPs) were prepared as carriers of low water solubility paclitaxel for tumor targeting, which were composed of monomethoxy-poly(ethylene glycol)-b-poly(lactide)-paclitaxel (MPEG-PLA-paclitaxel) and d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS)-folate (TPGS-FOL). NPs with various weight ratios of MPEG-PLA-paclitaxel and TPGS-FOL were prepared using a solvent extraction/evaporation method, which can also physically encapsulate paclitaxel. The size, size distribution, surface charge, and morphology of the drug-loaded NPs were characterized using a Zetasizer Nano ZS, scanning electron microscope (SEM), and atomic force microscopy (AFM). The encapsulation and drug loading efficiencies of these polymeric NPs are analyzed using high-performance liquid chromatography (HPLC) at 227 nm. The combination of covalent coupling and physical encapsulation is found to improve the loading of paclitaxel in NPs greatly. The in vitro antitumor activity of the drug-loaded NPs is assessed using a standard method of transcriptional and translational (MTT) assays against HeLa and glioma C6 cells. When the cells were exposed to NPs with the same paclitaxel weights, cell viability decreases in relation to the increase in TPGS-FOL in drug-loaded NPs. To investigate drug-loaded NP cellular uptake, the fluorescent dye coumarin-6 is utilized as a model drug and enveloped in NPs with 0 or 50% TPGS-FOL. Confocal laser scanning microscopy (CLSM) analysis shows that cellular uptake is lower for coumarin-6-loaded NPs with 0% TPGS-FOL than those with 50% TPGS-FOL. However, no difference for NIH 3T3 cells with normally expressed folate receptors is found. Results from in vitro antitumor activity and cellular uptake assay demonstrate that folic acid promotes drug-loaded NP cellular uptake through folate receptor-mediated endocytosis (RME). All of these results demonstrate that folate-decorated hybrid polymeric NPs are potential carriers for tumor-targeted drug delivery.

Photocatalyzed surface modification of poly(dimethylsiloxane) with polysaccharides and assay of their protein adsorption and cytocompatibility.

An improved approach for the surface modification of poly(dimethylsiloxane) (PDMS) using carboxymethyl cellulose (CMC), carboxymethyl beta-1,3-dextran (CMD), and alginic acid (AA) was investigated. The PDMS substrates were first oxidized in a H(2)SO(4)/H(2)O(2) solution to transform the Si-CH(3) groups on their surfaces into Si-OH groups. Then methacrylate groups were grafted onto the substrates through a silanization reaction using 3-(trimethoxysilyl)propyl methacrylate. Sequentially, cysteamine was conjugated onto the silanized surfaces by the reaction between the thiol and methacrylate groups under 254 nm UV exposure. Afterward, the amino-terminated PDMS substrates were sequentially reacted with CMC, CMD, and AA in the presence of N-hydroxysuccinimide and 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide, resulting in the grafting of polysaccharides onto PDMS surfaces. The composition and chemical state of the modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS). In addition, the stability and dynamic characteristics of the polysaccharide-grafted PDMS substrates were investigated by XPS and temporal contact angle experiments. A protein adsorption assay using bovine serum albumin (BSA), chicken egg albumin, lysozyme, and RNase-A showed that the introduction of CMD and AA can reduce the adsorption of negatively charged BSA and chicken egg albumin, but increase the adsorption of the positively charged lysozyme and RNase-A. However, CMC-modified PDMS surfaces showed protein-repelling properties, regardless of whether the protein was positively or negatively charged. A cell culture and migration study of glioma C6, MKN-45, MCF-7, and HepG-2 cells revealed that the polysaccharide-modified PDMS greatly improved the cytocompatibility of native PDMS.

Biomimetic choline-like graphene oxide composites for neurite sprouting and outgrowth.

Neurodegenerative diseases or acute injuries of the nervous system always lead to neuron loss and neurite damage. Thus, the development of effective methods to repair these damaged neurons is necessary. The construction of biomimetic materials with specific physicochemical properties is a promising solution to induce neurite sprouting and guide the regenerating nerve. Herein, we present a simple method for constructing biomimetic graphene oxide (GO) composites by covalently bonding an acetylcholine-like unit (dimethylaminoethyl methacrylate, DMAEMA) or phosphorylcholine-like unit (2-methacryloyloxyethyl phosphorylcholine, MPC) onto GO surfaces to enhance neurite sprouting and outgrowth. The resulting GO composites were characterized by Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, UV-vis spectrometry, scanning electron microscopy, and contact angle analyses. Primary rat hippocampal neurons were used to investigate nerve cell adhesion, spreading, and proliferation on these biomimetic GO composites. GO-DMAEMA and GO-MPC composites provide the desired biomimetic properties for superior biocompatibility without affecting cell viability. At 2 to 7 days after cell seeding was performed, the number of neurites and average neurite length on GO-DMAEMA and GO-MPC composites were significantly enhanced compared with the control GO. In addition, analysis of growth-associate protein-43 (GAP-43) by Western blot showed that GAP-43 expression was greatly improved in biomimetic GO composite groups compared to GO groups, which might promote neurite sprouting and outgrowth. All the results demonstrate the potential of DMAEMA- and MPC-modified GO composites as biomimetic materials for neural interfacing and provide basic information for future biomedical applications of graphene oxide.

Antifouling properties of poly(dimethylsiloxane) surfaces modified with quaternized poly(dimethylaminoethyl methacrylate).

A quaternized poly(dimethylaminoethyl methacrylate)-grafted poly(dimethylsiloxane) (PDMS) surface (PDMS-QPDMAEMA) was successfully prepared in this study via solution-phase oxidation reaction and surface-initiated atom transfer radical polymerization (SI-ATRP) using dimethylaminoethyl methacrylate (DMAEMA) as initial monomer. PDMS substrates were first oxidized in H(2)SO(4)/H(2)O(2) solution to transform the SiCH(3) groups on their surfaces into SiOH groups. Subsequently, a surface initiator for ATRP was immobilized onto the PDMS surface, and DMAEMA was then grafted onto the PDMS surface via copper-mediated ATRP. Finally, the tertiary amino groups of PolyDMAEMA (PDMAEMA) were quaternized by ethyl bromide to provide a cationic polymer brush-modified PDMS surface. Various characterization techniques, including contact angle measurements, attenuated total reflection infrared spectroscopy, and X-ray photoelectron spectroscopy, were used to ascertain the successful grafting of the quaternized PDMAEMA brush onto the PDMS surface. Furthermore, the wettability and stability of the PDMS-QPDMAEMA surface were examined by contact angle measurements. Antifouling properties were investigated via protein adsorption, as well as bacterial and cell adhesion studies. The results suggest that the PDMS-QPDMAEMA surface exhibited durable wettability and stability, as well as significant antifouling properties, compared with the native PDMS and PDMS-PDMAEMA surfaces. In addition, our results present possible uses for the PDMS-QPDMAEMA surface as adhesion barriers and antifouling or functional surfaces in PDMS microfluidics-based biomedical applications.

Click synthesis of neutral, cationic, and zwitterionic poly(propargyl glycolide)-co-poly(ɛ-caprolactone)-based aliphatic polyesters as antifouling biomaterials.

With the development of polymer-based biomaterials, aliphatic polyesters have attracted considerable interest because of their non-toxicity, non-allergenic property, and good biocompatibility. However, the hydrophobic nature and the lack of side chain functionalities of aliphatic polyesters limit their biomedical applications. In this study, we prepared four new polyesters: poly(sulfobetaine methacrylate)-, poly(2-methacryloyloxyethyl phosphotidylcholine)-, poly(ethylene glycol)-, and quaternized poly[(2-dimethylamino)ethyl methacrylate]-grafted poly(propargyl glycolide)-co-poly(ɛ-caprolactone). Their synthesis was conducted through ring-opening polymerization of acetylene-functionalized lactones and subsequent graft of bioactive units using click chemistry. The chemical structures of the polyesters were characterized through nuclear magnetic resonance and Fourier-transform infrared spectroscopy, and their physical properties (including molecular weight, glass transition temperature, and melting point) were determined using gel permeation chromatography and differential scanning calorimetry. For studies on their hydrophilicity, stability, and anti-bioadhesive property, a series of polymeric surfaces of these polyesters was prepared by coating them onto glass substrates. The hydrophilicity and stability of these polyester surfaces were examined by contact angle measurements and attenuated total reflection Fourier-transform infrared spectroscopy. Their anti-bioadhesive property was investigated through protein adsorption, as well as cellular and bacterial adhesion assays. The prepared polyesters showed good hydrophilicity and long-lasting stability, as well as significant anti-fouling property. The newly prepared polyesters could be developed as promising anti-fouling materials with extensive biomedical applications.

Synthesis of polyethylene glycol- and sulfobetaine-conjugated zwitterionic poly(L-lactide) and assay of its antifouling properties.

A new antifouling polyester monomethoxy-poly(ethylene glycol)-b-poly(L-lactide)-b-poly(sulfobetaine methacrylate) (MPEG-PLA-PSBMA) was obtained by ring-opening polymerization of L-lactide, and subsequent click chemistry to graft the azide end-functionalized poly(sulfobetaine methacrylate) (polySBMA) moieties onto the alkyne end-functionalized MPEG-PLA (MPEG-PLA-alkyne). The chemical structure of the polymer was characterized using (1)H nuclear magnetic resonance and Fourier-transform infrared spectroscopy, and its physical properties (including molecular weight, glass transition temperature, and melting point) were determined using gel permeation chromatography and differential scanning calorimetry. To investigate its hydrophilicity and stability, as well as its antifouling properties, the polymer was also prepared as a surface coating on glass substrates. The wettability and stability of this polyester was examined by contact angle measurements. Furthermore, its antifouling properties were investigated via protein adsorption, cell adhesion studies, and bacterial attachment assays. The results suggest that the prepared zwitterionic polyester exhibits durable wettability and stability, as well as significant antifouling properties. The new zwitterionic polyester MPEG-PLA-PSBMA could be developed as a promising antifouling material with extensive biomedical applications.

Novel TEMPO-PEG-RGDs conjugates remediate tissue damage induced by acute limb ischemia/reperfusion.

We have recently developed new Tempo-PEG-RGDs conjugates and have quantitatively examined their antithrombotic and antioxidant capabilities. These compounds were therapeutically beneficial when characterized in both in vitro platelet aggregation assays and a rat model of arterial thrombosis. Moreover, these compounds demonstrated significant protection from organ damage in a rat model of ischemia/reperfusion. Our data indicate that Tempo-PEG-RGDs represent a new class of adjuvants with therapeutic efficacy in acute and transient ischemic damage.

Synthesis of copolymers using dendronized polyethylene glycol and assay of their blood compatibility and antibacterial adhesion activity.

Thrombus formation and microbial invasion are two major complications that impede the widespread application of blood-contacting devices. The development of new materials that have blood compatibility and antibacterial adhesion activity has gained increased attention. In this study, a new class of polymers composed of hydrophilic dendronized polyethylene glycol (PEG) methacrylate and hydrophobic octyne monomethyl ether-glycidyl methacrylate was synthesized via click chemistry and free radical polymerization. Different polymers were synthesized by changing the ratio of the two monomers. The structures of the synthesized polymers were characterized by (1)H nuclear magnetic resonance and Fourier-transform infrared spectroscopy. Their physical properties such as molecular weight, polydispersity, and glass transition temperature were determined using gel permeation chromatography and differential scanning calorimetry. The synthesized polymers were coated on glass slides to prepare a series of polymeric surfaces. Contact angle measurements and attenuated total reflection Fourier-transform infrared spectroscopy analysis showed that the polymeric surfaces had long-lasting stability. The introduction of the monomer dendronized PEG methacrylate to the polymers greatly improved the hydrophilicity of the polymeric surfaces. The blood compatibility of the synthesized polymers was evaluated by protein (bovine serum albumin and fibrinogen) adsorption and platelet adhesion assays. Their antibacterial adhesion ability was investigated using the Gram-negative Pseudomonas aeruginosa and the Gram-positive Staphylococcus aureus. The results demonstrated that the amount of adsorbed protein, platelets, and bacteria on the polymeric surfaces decreased with increased content of the hydrophilic monomer dendronized PEG methacrylate in the polymers. However, no obvious difference was observed when such content exceeded 50 mol%. The results suggested that the new kind of polymer could be developed as a promising blood-contact coating material that may have extensive medical applications.

Synthesis and photophysical properties of three (multi)branched planar molecules.

Three thiophenevinyl substituted one-, two-, and three-branched truxene π-conjugated compounds TS1, TS2 and TS3 have been prepared using a Heck reaction. Their linear absorption, single- and two-photon excited fluorescence were examined. The three analogues emit blue fluorescence at 420 nm. The number of branches has no influence on the position of the absorption maxima of the charge transfer band and fluorescence emitting maxima. However, the molar extinction coefficients of charge transfer band increase almost linearly with the number of branches. The two-photon absorption cross-section of the octupolar three-branched compound TS3 is several times that of the two-branched compound TS2 and one-branched compound TS1.

Preparation and in vitro properties of redox-responsive polymeric nanoparticles for paclitaxel delivery.

Rice-like polymeric nanoparticles (NPs) composed of a new redox-responsive polymer, poly(ethylene glycol)-b-poly(lactic acid) (MPEG-SS-PLA), were prepared to carry paclitaxel (PTX) for glutathione (GSH)-regulated drug delivery. The PTX-loaded MPEG-SS-PLA NPs were fabricated using an optimized oil-in-water emulsion/solvent evaporation method. The size and morphology of the prepared NPs were characterized by scanning electron microscopy (SEM). The SEM results demonstrate that the NPs were dispersed as individual particles and were rice-shaped. The PTX loading efficiency, in vitro release, and stability of the NPs were analyzed by high-performance liquid chromatography (HPLC). The HPLC results revealed that the NPs released almost 90% PTX within 96 h when GSH presented at intracellular concentrations, whereas only a very small PTX amount was released at plasma GSH levels. The in vitro cytotoxicities of the NPs against A549, MCF-7, and HeLa carcinoma cells were assessed using a standard methyl thiazolyl tetrazoliun (MTT) assay. The MTT assay results show that the NPs caused concentration- and time-dependent changes in cell viability. To investigate the cellular uptake of the PTX-loaded NPs, visual endocytosis assay was performed using the fluorescent dye coumarin-6 as a model drug. The endocytosis assay results reveal rapid penetration and intracellular accumulation of coumarin-6-loaded NPs, as well as rapid coumarin-6 dispersion from the NPs. Overall, these findings establish that the NPs containing the synthesized redox-responsive polymer MPEG-SS-PLA can be used as potential carrier systems for antitumor drug delivery.

The effect of acetylcholine-like biomimetic polymers on neuronal growth.

Driven by clinical needs, nerve regeneration studies have recently become the focus of research and area of growth in tissue engineering. Biomimetic polymer synthesis and functional interface construction is a promising solution to induce neuritic sprouting and guide the regenerating nerve. However, few studies have been made on primary hippocampal neurons. In this study, a new type of acetylcholine-like biomimetic polymers for their potential in biomaterial-modulated nerve regeneration application is synthesized using click chemistry and free radical polymerization. The structure of the synthesized polymers includes a "bioactive" unit (acetylcholine-like unit) and a "bioinert" unit [poly(ethylene glycol) unit]. To explore the effects of the bioactive unit and the bioinert unit on neuronal growth, different ratios of the two initial monomers poly(ethylene glycol) monomethyl ether-glycidyl methacrylate (MePEG-GMA) and dimethylaminoethyl methacrylate (DMAEMA) were employed and five different polymers were synthesized. Their chemical structures were characterized using (1)H nuclear magnetic resonance and Fourier-transform infrared spectroscopy, and their physical properties (including molecular weight, polydispersity, glass transition temperature, and melting point) were determined using gel permeation chromatography and differential scanning calorimetry. Culturing of the primary rat hippocampal neurons on the polymeric surfaces show that the ratio of the two initial monomers utilized for polymer synthesis significantly affects neuronal growth. Rat hippocampal neurons show different growth morphologies on different polymeric surfaces. The polymeric surface prepared with 1:60 (mol/mol) of MePEG-GMA to DMAEMA induces neuronal regenerative responses similar to that on poly-l-lysine, a very common benchmark material for nerve cell cultures. These results suggest that acetylcholine-like biomimetic polymers are potential biomaterials for neural engineering applications, particularly in modulating the growth of hippocampal neurons.

Surface modification of PDMS by surface-initiated atom transfer radical polymerization of water-soluble dendronized PEG methacrylate.

The current paper reports the synthesis of a highly hydrophilic, antifouling dendronized poly(3,4,5-tris(2-(2-(2-hydroxylethoxy)ethoxy)ethoxy)benzyl methacrylate) (PolyPEG) brush using surface initiated atom transfer radical polymerization (SI-ATRP) on PDMS substrates. The PDMS substrates were first oxidized in H(2)SO(4)/H(2)O(2) solution to transform the Si-CH(3) groups on their surfaces into Si-OH groups. Subsequently, a surface initiator for ATRP was immobilized onto the PDMS surface, and PolyPEG was finally grafted onto the PDMS surface via copper-mediated ATRP. Various characterization techniques, including contact angle measurements, attenuated total reflection infrared spectroscopy, and X-ray photoelectron spectroscopy, were used to ascertain the successful grafting of the PolyPEG brush onto the PDMS surface. Furthermore, the wettability and stability of the PDMS-PolyPEG surface were examined by contact angle measurements. Anti-adhesion properties were investigated via protein adsorption, as well as bacterial and cell adhesion studies. The results suggest that the PDMS-PolyPEG surface exhibited durable wettability and stability, as well as significantly anti-adhesion properties, compared with native PDMS surfaces. Additionally, our results present possible uses for the PDMS-PolyPEG surface as adhesion barriers and anti-fouling or functional surfaces in biomedical applications.