Photoswitchable Micelles for the Control of Singlet-Oxygen Generation in Photodynamic Therapies.

Inadvertent photosensitizer-activation and singlet-oxygen generation hampers clinical application of photodynamic therapies of superficial tumors or subcutaneous infections. Therefore, a reversible photoswitchable system was designed in micellar nanocarriers using ZnTPP as a photosensitizer and BDTE as a photoswitch. Singlet-oxygen generation upon irradiation didnot occur in closed-switch micelles with ZnTPP/BDTE feeding ratios >1:10. Deliberate switch closure/opening within 65-80 min was possible through thin layers of porcine tissue in vitro, increasing for thicker layers. Inadvertent opening of the switch by simulated daylight, took several tens of hours. Creating deliberate cell damage and prevention of inadvertent damage in vitro and in mice could be done at lower ZnTPP/BDTE feeding ratios (1:5) in open-switch micelles and at higher irradiation intensities than inferred from chemical clues to generate singlet-oxygen. The reduction of inadvertent photosensitizer activation in micellar nanocarriers, while maintaining the ability to kill tumor cells and infectious bacteria established here, brings photodynamic therapies closer to clinical application.

Preparation and biocompatibility of demineralized bone matrix/sodium alginate putty.

Demineralized bone matrix (DBM) powder is widely used for bone regeneration due to its osteoinductivity and osteoconductivity. However, difficulties with handling, tendency to migrate from graft sites and lack of stability after surgery sometimes limit the clinical utility of this material. In this work, the possibility of using sodium alginate (ALG) carrier to deliver DBM powder was assessed. DBM-ALG putty with the DBM:ALG weight ratio of 5:5, 6:4, 7:3, 8:2 were prepared, respectively. The properties of the formed composite, including discrete degree, washout property, pH, equilibrium swelling as well as cytotoxicity in vivo, were adopted to ascertain the optimal ratio of DBM and ALG. The discrete diameter increased from 1.25 cm (5:5) to 2.08 cm (8:2) with the increase of DBM content. There was significant difference between the 8:2 group and the other groups in discrete diameter. The ratio of DBM had a significant effect on the swelling value. The pH of composites showed an increase trend with the DBM ratio's increase, when the ratio reached 7:3, the pH (7.22) was approximately equal to the body fluid. The proliferation of MC3T3-E1 cells was inhibited in the 5:5, 6:4 and 7:3 groups, while a slightly increased in the 8:2 group. The DBM-ALG with the optimal ratio of 7:3 was confirmed based on the results of the above mentioned. The histocompatibility of DBM-ALG (7:3) was examined using a rat model in which the materials were implanted subcutaneously, compared with the polyethylene, ALG and DBM. The study in vivo showed DBM-ALG (7:3) had a lower inflammatory response than DBM, a higher vascularization than ALG. The osteoinduction of DBM-ALG (7:3) was evaluated by co-culturing with MC3T3-E1 in vitro, compared with the DMEM, ALG and DBM. The results indicated calcification area in the DBM-ALG group was similar to that in the DBM group, larger than ALG group and DMEM group. The DBM-ALG (7:3) putty is promising as a directly injectable graft for repair of bone defect.

Sphingoaurantiacus polygranulatus gen. nov., sp. nov., isolated from high-Arctic tundra soil, and emended descriptions of the genera Sandarakinorhabdus, Polymorphobacter and Rhizorhabdus and the species Sandarakinorhabdus limnophila, Rhizorhabdus argentea and Sphingomonas wittichii.

An orange, Gram-reaction-negative and aerobic bacterium, designated MC 3718T, was isolated from a tundra soil near Ny-Ålesund, Svalbard archipelago, Norway (78° N). The cells were motile with either a polar or a subpolar flagellum and reproduced by budding or asymmetrical cell division. Growth occurred at 4-37 °C (optimum 28-30 °C) and at pH 6.0-10.0 (optimum pH 9.0). Many cells accumulated poly-ß-hydroxybutyrate granules and contained a single large polyphosphate granule at a pole or in the middle of the cell. Cell walls contained meso-diaminopimelic acid as the diagnostic diamino acid, and ubiquinone 10 was the main respiratory quinone. Strain MC 3718T contained summed feature 3 (comprising C16 : 1ω7c and/or C16 : 1ω6c; 29.49 %), summed feature 8 (C18 : 1ω7c and/or C18 : 1ω6c; 29.38 %), C17 : 1ω6c (10.15 %), C14 : 0 2-OH (9.05 %) and C16 : 0 (6.84 %) as the major cellular fatty acids. The main polar lipids were two sphingoglycolipids, phosphatidylethanolamine, diphosphatidylglycerol, phosphatidylglycerol, three unknown phospholipids and two unknown polar lipids. Carotenoids were detected. Phylogenetic analysis based on 16S rRNA gene sequences indicated that strain MC 3718T belonged to the family Sphingomonadaceae. The DNA G+C content was 67.2 mol%. On the basis of phenotypic, chemotaxonomic and phylogenetic data, strain MC 3718T is considered to represent a novel genus and species in the family Sphingomonadaceae, for which the name Sphingoaurantiacus polygranulatus gen. nov., sp. nov. is proposed. The type strain of Sphingoaurantiacus polygranulatus is MC 3718T ( = CCTCC AB 2014274T = LMG 28636T). Emended descriptions of the genera Sandarakinorhabdus, Polymorphobacter and Rhizorhabdus and the species Sandarakinorhabdus limnophila, Rhizorhabdus argentea and Sphingomonas wittichii are also provided.

Preparation of porous PLA/DBM composite biomaterials and experimental research of repair rabbit radius segmental bone defect.

Bone substitutes are used in wide range of orthopaedic application. An ideal bone substitute should exhibit superior osteoinductive and osteoconductive properties. Neither bio-derived materials nor synthetic materials can meet the needs of an ideal bone substitute. Preparation of composite materials is a promising way to improve properties of biomaterial. In this study, the porous poly lactic acid (PLA)/demineralized bone matrix (DBM) composite biomaterials prepared by supercritical CO2 technique were implanted to repair rabbit radius segmental bone defect. By comparing with PLA and bone autograft, the X-ray result and histological analysis showed the repair effect of PLA/DBM porous composite materials is significantly better than that of the PLA group and the blank control group, and is similar to autologous bone. The PLA/DBM can promote the healing of bone defects and can be used as a kind of ideal alternative materials to repair bone defects.

Self-regulated multifunctional collaboration of targeted nanocarriers for enhanced tumor therapy.

Exploring ideal nanocarriers for drug delivery systems has encountered unavoidable hurdles, especially the conflict between enhanced cellular uptake and prolonged blood circulation, which have determined the final efficacy of cancer therapy. Here, based on controlled self-assembly, surface structure variation in response to external environment was constructed toward overcoming the conflict. A novel micelle with mixed shell of hydrophilic poly(ethylene glycol) PEG and pH responsive hydrophobic poly(ß-amino ester) (PAE) was designed through the self-assembly of diblock amphiphilic copolymers. To avoid the accelerated clearance from blood circulation caused by the surface exposed targeting group c(RGDfK), here c(RGDfK) was conjugated to the hydrophobic PAE and hidden in the shell of PEG at pH 7.4. At tumor pH, charge conversion occurred, and c(RGDfK) stretched out of the shell, leading to facilitated cellular internalization according to the HepG2 cell uptake experiments. Meanwhile, the heterogeneous surface structure endowed the micelle with prolonged blood circulation. With the self-regulated multifunctional collaborated properties of enhanced cellular uptake and prolonged blood circulation, successful inhibition of tumor growth was achieved from the demonstration in a tumor-bearing mice model. This novel nanocarrier could be a promising candidate in future clinical experiments.

NIR-activated self-sensitized polymeric micelles for enhanced cancer chemo-photothermal therapy.

NIR-activated therapies based on light-responsive drug delivery systems are emerging as a remote-controlled method for cancer precise therapy. In this work, fluorescent dye indocyanine green (ICG)-conjugated and bioactive compound gambogic acid (GA)-loaded polymeric micelles (GA@PEG-TK-ICG PMs) were smoothly fabricated via the self-assembly of the reactive oxygen species (ROS)-responsive thioketal (TK)-linked amphiphilic polymer poly(ethyleneglycol)-thioketal-(indocyanine green) (PEG-TK-ICG). The resultant micelles demonstrated increased resistance to photobleaching, enhanced photothermal conversion efficiency, NIR-controlled drug release behavior, preferable biocompatibility, and excellent tumor accumulation performance. Moreover, upon an 808 nm laser irradiation, the micellar photoactive chromophore ICG converted the absorbed optical energy to both hyperthermia for photothermal therapy (PTT) and ROS as the feedback trigger to the micelles for the tumor-specific release of GA, which could serve as not only a chemotherapeutic drug to directly kill tumor cells but also a heat shock protein 90 (HSP90) inhibitor to realize the photothermal sensitization. As a result, an extremely high tumor inhibition rate (97.9%) of mouse 4 T1 breast cancer models was achieved with negligible side effects after the chemo-photothermal synergistic therapy. This NIR-activated nanosystem with photothermal self-sensitization function may provide a feasible option for the effective treatment of aggressive breast cancers.

Co-delivery of anionic epitope/CpG vaccine and IDO inhibitor by self-assembled cationic liposomes for combination melanoma immunotherapy.

Immunotherapy is revolutionizing cancer treatment. Vaccination of antigenic peptides has been identified as a promising strategy for cancer immunotherapy while insufficient immune responses were stimulated due to low antigenicity. Moreover, immune checkpoint blockade therapy is still limited by a low objective response rate. In this work, cationic polymer-lipid hybrid nanovesicle (P/LNV)-based liposomes are designed to simultaneously deliver tumor vaccines composed of anionic antigen epitopes, toll-like receptor-9 agonist (TLR9), CpG (AE/CpG), and indoleamine-2,3-dioxygenase (IDO) inhibitor, 1-methyl-tryptophan (1-MT), to increase the immunogenicity of peptide antigens and meanwhile block the immune checkpoint. P/LNV liposomes efficiently enhanced the uptake of vaccines by dendritic cells (DCs) and improved the maturation of DCs indicated by the significantly increased percentage of CD86+MHCI+ DCs, resulting in a potent cytotoxic T-lymphocyte (CTL) response against B16-OVA tumor cells in vitro. Importantly, the combination immunotherapy showed significantly higher therapeutic efficiency towards melanoma tumors in mice, compared with an untreated or individual therapy modality. Mechanistically, the co-delivery system could elicit a strong cancer-specific T-cell response, as characterized by the remarkably increased infiltration of CD8+ T cells in the tumor and draining lymph nodes. Altogether, cationic liposomes delivered with tumor vaccines and IDO inhibitor provide a promising platform for cancer immunotherapy by provoking antitumor T-cell immunity and simultaneously reversing the immunosuppressive tumor microenvironment.

Polymer-lipid hybrid nanovesicle-enabled combination of immunogenic chemotherapy and RNAi-mediated PD-L1 knockdown elicits antitumor immunity against melanoma.

Immunotherapy has revolutionized cancer treatment; however, only a limited portion of patients show responses to currently available immunotherapy regimens. Here, we demonstrate that RNA interference (RNAi) combined with immunogenic chemotherapy can elicit potent antitumor immunity against melanoma. Specially, we developed cationic polymer-lipid hybrid nanovesicles (P/LNVs) as a new delivery system for doxorubicin and small interfering RNA (siRNA) with extensive cytotoxicity and gene silencing efficiency towards B16 cells. The deployment of doxorubicin-loaded P/LNVs augmented the expression and presentation of endogenous tumor antigens directly in situ by inducing the immunogenic cell death of B16 cells through poly(ADP-ribose) polymerase 1-dependent (PARP1) apoptosis pathway; thereby, eliciting remarkable antitumor immune responses in mice. Leveraging dying B16 cells as a vaccination strategy in combination with RNAi-based programmed cell death ligand 1 (PD-L1) knockdown showed efficacy in both prophylactic and metastasis melanoma settings. Strikingly, PD-L1 blockade synergized with a sub-therapeutic dose of doxorubicin triggered robust therapeutic antitumor T-cell responses and eradicated pre-established tumors in 30% of mice bearing B16 melanoma. Our findings indicated that this combination treatment provided a new powerful immunotherapy modality, characterized by markedly increased infiltration of effector CD8+ T cells and effective alleviation of the immunosuppressive microenvironment in tumors. P/LNVs is a versatile and highly scalable carrier that can enable a broad combination of nanomedicine and RNAi, providing new therapeutic strategies for advanced cancers.

Combating drug-resistant bacterial infection using biodegradable nanoparticles assembled from comb-like polycarbonates grafted with amphiphilic polyquaternium.

Bacterial infection is a serious clinical threat. The misuse of antibiotics has already resulted in the emergence of antibiotic-resistant strains of pathogenic bacteria. Efficient membrane-destructive antibacterial agents are considered as an alternative, promising solution against bacterial infection. Herein, we prepared a new type of comb-like cationic, polyethylene glycol (PEG) block polycarbonates with polyquaternium arms (G-CgQAs). The amphiphilic G-CgQAs could self-assemble into about 60 nm sized nanoparticles (NPs) with positive charges (20~30 mV). G-CgQA-3 NPs with an appropriate hydrophobic-hydrophilic balance in the polyquaternium arms showed antibacterial activity against Gram-negative, Gram-positive, and drug-resistant strains at low concentrations (MIC 64-128 µg mL-1) and low hemolysis (HC50 > 2000 µg mL-1). In vivo anti-infection tests indicated G-CgQA-3 NPs could highly inhibit the growth of vancomycin-resistant bacteria by spraying on wounds. Collectively, G-CgQA NPs hold great promise for the prevention of infection, serving as new antibacterial agents. This study also highlights the significance of a hydrophobic block in positive polyquaternium arms to facilitate the antibacterial activity of cationic, quaternized polymers. The design of comb-like amphiphilic cationic polycarbonates provides a new method for manufacturing antibacterial nano-agents.

Vitamin E-Enhanced Liners in Primary Total Hip Arthroplasty: A Systematic Review and Meta-Analysis.

OBJECTIVE: Adding vitamin E to highly cross-linked polyethylene liners is frequently performed in clinical practice, aiming at reducing liner wear, increasing liner survival, and delaying revision surgery. This study is aimed at evaluating the revision rate, total femoral head penetration, and postoperative clinical function of highly cross-linked polyethylene liners with and without vitamin E in total hip arthroplasty. METHODS: We conducted a systematic literature search to identify the use of highly cross-linked vitamin E liners compared to other liners in patients who received total hip arthroplasty (THA) before April 2021. The study quality assessment and data collection were conducted by two independent reviewers. Studies were artificially grouped, and vitamin E-enhanced liners (VE-PE) were compared with vitamin E-free liners (non-VE-PE). Analyses were executed using Review Manager version 5.4.1. RESULTS: From the preliminary screening of 568 studies, fourteen studies met the research criteria. Compared to non-VE-PE, using VE-PE reduced the all-cause revision rate (odds ratio = 0.54; 95% confidence interval (CI) 0.40, 0.73; P < 0.0001). The total femoral head penetration of the VE-PE was lower than that of the non-VE-PE (mean difference = -0.10; 95% CI -0.17, -0.03; P = 0.007). However, there was no difference in clinical function, including the Harris Hip Score and EuroQol Five-Dimension Questionnaire scores. CONCLUSION: Compared to the liners without vitamin E, the addition of vitamin E to liners could reduce the all-cause revision rate by approximately 46% in the short-term follow-up. In addition, even though addition of vitamin E could also slow down femoral head penetration, there is no contribution to clinical function.

Development of injectable thermosensitive polypeptide hydrogel as facile radioisotope and radiosensitizer hotspot for synergistic brachytherapy.

Brachytherapy is considered to be an unparalleled form of conformal radiation therapy, which involves the delivery of radiation directly to tumor lesions or the postoperative cavity. With the development of specific applicators, the exploitation of in situ drug-delivery platform introduces opportunities for the synchronous administration of radiosensitizers. In this study, an iodine-131 (I131)-labeled injectable thermosensitive methoxy poly(ethylene glycol)-b-poly(tyrosine) hydrogel (denoted as PETyr-I131) was developed via a facile method. The radioactive source of I131 was immobilized at the subcutaneous injection site and monitored via single-photon emission computed tomography in real time, and hematological and histopathological analyses revealed no obvious side effects. Additionally, the SmacN7 peptide conjugated with cell membrane-permeable oligosarginine (denoted as SmacN7-R9) was used to enhance the radiosensitivity of cancer cells, as confirmed by the results of reactive oxygen species detection, DNA damage assay, cell apoptosis assay, and clonogenic evaluation. Importantly, a synergistic brachytherapy treatment effect on tumor-bearing nude mice was achieved. The proposed thermosensitive supramolecular hydrogel platform, which conformally immobilizes radionuclides and delivers radiosensitizers by virtue of its proximity to the site of the primary tumor or the postoperative cavity, has great potential for achieving synergistic treatment outcomes with reduced radiation-related side effects. STATEMENT OF SIGNIFICANCE: In this work, a kind of radioiodinated thermosensitive supramolecular hydrogel was developed, which was facilely used as the radioactive source for brachytherapy. Meanwhile, SmacN7-R9 peptide was combined as a model radiosensitizer to facilitate the activation of tumor cell apoptosis pathways and promotion of radiation-induced cytotoxicity. Synergistic brachytherapy outcomes were achieved from the in vitro and in vivo evaluations. Therefore, from the practical standpoint, this thermosensitive supramolecular hydrogel platform holds great potential for the 3D-conformally immobilizing radionuclide and delivering radiosensitizer by virtue of its proximity to the site of primary tumor lesions or postoperative cavity, resulting in synergetic treatment outcomes with reduced radiation associated side effects.

ICG-Conjugated and 125 I-Labeled Polymeric Micelles with High Biosafety for Multimodality Imaging-Guided Photothermal Therapy of Tumors.

Noninvasive multimodality imaging-guided precision photothermal therapy (PTT) is proven to be an effective strategy for tumor theranostics by integrating diagnostics and therapeutics in one nanoplatform. In this study, indocyanine green (ICG)-conjugated and radionuclide iodine-125 (125 I)-labeled polymeric micelles (PEG-PTyr(125 I)-ICG PMs) are strategically prepared by the self-assembly of the ICG-decorated amphiphilic diblock polymer poly(ethylene glycol)-poly(l-tyrosine-125 I)-(indocyanine green) (PEG-PTyr(125 I)-ICG). The as-prepared polymeric micelles exhibit favorable biocompatibility, excellent size/photo/radiolabel stability, a high-photothermal conversion efficiency, a passive tumor-targeting ability, and a fluorescence (FL)/photoacoustic (PA)/single photon emission computed tomography (SPECT) imaging property. After tail intravenous injection, the polymeric micelles can efficiently accumulate at the tumor site and present comprehensive FL/PA/SPECT images with a high sensitivity, excellent spatial resolution, and unlimited tissue penetration under near-infrared (NIR) irradiation. Upon 808 nm laser irradiation, the subsequent precision PTT of tumors can be achieved with minimal cumulative side effects. Thus, this capable multifunctional nanoplatform with simple components and preparation procedures for FL/PA/SPECT multimodality imaging-guided PTT can be a potential candidate for clinical tumor theranostics.

Surface-adaptive zwitterionic nanoparticles for prolonged blood circulation time and enhanced cellular uptake in tumor cells.

Recently, zwitterionic materials have been developed as alternatives to PEG for prolonging the circulation time of nanoparticles without triggering immune responses. However, zwitterionic coatings also hindered the interactions between nanoparticles and tumor cells, leading to less efficient uptake of nanoparticles by cancer cells. Such effect significantly limited the applications of zwitterionic materials for the purposes of drug delivery and the development to novel therapeutic agents. To overcome these issues, surface-adaptive mixed-shell micelles (MSMs) with poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)/poly(ß-amino ester) (PAE) heterogeneous surfaces were constructed. Owing to the synergistic effect of zwitterionic coatings and micro-phase-separated surfaces, PMPC mixed-shell micelles exhibited the improved blood circulation time compared to single-PEG-shell micelles (PEGSMs) and single-PMPC-shell micelles (PMPCSMs). Moreover, such MSMs can convert their surface to positively charged ones in response to the acidic tumor microenvironment, leading to a significant enhancement in cellular uptake of MSMs by tumor cells. This strategy demonstrated a general approach to enhance the cellular uptake of zwitterionic nanoparticles without compromising their long circulating capability, providing a practical method for improving the tumor-targeting efficiency of particulate drug delivery systems. STATEMENT OF SIGNIFICANCE: Herein we demonstrate a general strategy to integrate non-fouling zwitterionic surface on the nanoparticles without compromising their capability of tumor accumulation, by constructing a surface-adaptive mixed-shell micelles (MSMs) with poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)/poly(ß-amino ester) (PAE) heterogeneous surfaces. At the blood pH (7.4), PAE chains collapsed to the inner of the shell due to the deprotonation, and the forming micro-phase separation structure was synergistic with zwitterionic surface to prolong the circulation time of MSMs in the blood. While at the tumor sites, PAE was protonated, and the positively charged surface of MSMs enhanced cellular uptake. This self-assembly-based strategy is compatible to other zwitterionic materials, endowing a great flexibility for the construction of responsive drug delivery systems particularly to the novel chemotherapeutic agents.

Preparation of poly(lactic acid)/sintered hydroxyapatite composite biomaterial by supercritical CO2.

Based on a kind of sintered hydroxyapatite (HA) with a good cytocompatibility, a series of polylactic acid (PLA) and PLA/HA with the various PLA:HA weight ratio (5:5, 4:6, 3:7, 2:8, 1:9) were fabricated by supercritical CO2. The physical and chemical properties were evaluated by pH, degradation, water absorption, porosity, density, mechanical property, and cytotoxicity respectively. With the increase of HA content, the pH value and porosity increased gradually, while weight loss rate and the density showed a gradual downward trend. Existence of HA can drastically improve the hydroscopicity of PLA scaffolds. The compression strength values slightly increased (p>0.05) from 39.96 MPa of PLA to 45.00 MPa of PLA/HA with the ratio of 7:3, subsequently, the values decreased (p<0.05) from 43.29 MPa (8:2) to 19.00 MPa (9:1). While the modulus of elasticity decreased (p<0.05) from 5.89 to 1.84 GPa with increasing HA content. The PLA/HA (8:2) promoted cell proliferation more significantly than any of other groups (p<0.05). Based on the results, the overall properties of porous scaffolds are the optimal when the weight ratio of PLA/HA is 8:2. Its pH, porosity, density, compression strength, and elasticity modulus are 7.39, 83.0%, 0.60g/cm-3, 34.1 MPa and 2.63 GPa, respectively. SEM observation presented a homogeneous distribution of HA in PLA matrix and a foam-like structure comprising interconnected pores.

Nanocarriers with conjugated antimicrobials to eradicate pathogenic biofilms evaluated in murine in vivo and human ex vivo infection models.

Conventional antimicrobials are becoming increasingly ineffective for treating bacterial infection due to the emergence of multi-drug resistant (MDR) pathogens. In addition, the biofilm-mode-of-growth of infecting bacteria impedes antimicrobial penetration in biofilms. Here, we report on poly(ethylene)glycol-poly(ß-amino esters) (PEG-PAE) micelles with conjugated antimicrobials, that can uniquely penetrate biofilms, target themselves to bacterial cell surfaces once inside the low-pH environment of a biofilm and release conjugated antimicrobials through degradation of their ester-linkage with PAE by bacterial lipases. In vitro, PEG-PAE micelles with conjugated Triclosan (PEG-PAE-Triclosan) yielded no inadvertent leakage of their antimicrobial cargo and better killing of MDR Staphylococcus aureus, Escherichia coli and oral streptococcal biofilms than Triclosan in solution. In mice, PEG-PAE-Triclosan micelles with conjugated Triclosan yielded better eradication efficacy towards a MDR S. aureus-infection compared with Triclosan in solution and Triclosan-loaded micelles at equal Triclosan-equivalent concentrations. Ex vivo exposure of multi-species oral biofilms collected from orthodontic patients to PEG-PAE-Triclosan micelles, demonstrated effective bacterial killing at 30-40 fold lower Triclosan-equivalent concentrations than achieved by Triclosan in solution. Importantly, Streptococcus mutans, the main causative organism of dental caries, was preferentially killed by PEG-PAE-Triclosan micelles. Thus PEG-PAE-Triclosan micelles present a promising addendum to the decreasing armamentarium available to combat infection in diverse sites of the body. STATEMENT OF SIGNIFICANCE: pH-adaptive polymeric micelles with conjugated antimicrobials can efficiently eradicate infectious biofilms from diverse body sites in mice and men. An antimicrobial was conjugated through an ester-linkage to a poly(ethylene glycol) (PEG)/poly(ß-amino ester) block copolymer to create micellar nanocarriers. Stable micelle structures were formed by the hydrophobic poly(ß-amino ester) inner core and a hydrophilic PEG outer shell. Thus formed PEG-PAE-Triclosan micelles do not lose their antimicrobial cargo underway to an infection site through the blood circulation, but penetrate and accumulate in biofilms to release antimicrobials once inside a biofilm through degradation of its ester-linkage by bacterial lipases, to kill biofilm-embedded bacteria at lower antimicrobial concentrations than when applied in solution. PEG-PAE-Triclosan micelles effectively eradicate biofilms of multi-drug-resistant pathogens and oral bacteria, most notably highly cariogenic Streptococcus mutans, in mice and men respectively, and possess excellent clinical translation possibilities.

Silver-Decorated Polymeric Micelles Combined with Curcumin for Enhanced Antibacterial Activity.

Because of the mounting prevalence of complicated infections induced by multidrug-resistant bacteria, it is imperative to develop innovative and efficient antibacterial agents. In this work, we design a novel polymeric micelle for simultaneous decorating of silver nanoparticles and encapsulating of curcumin as a combination strategy to improve the antibacterial efficiency. In the constructed combination system, silver nanoparticles were decorated in the micellar shell because of the in situ reduction of silver ions, which were absorbed by the poly(aspartic acid) (PAsp) chains in the shell. Meanwhile, natural curcumin was encapsulated into the poly(ε-caprolactone) (PCL) core of the micelle through hydrophobic interaction. This strategy could prevent aggregation of silver nanoparticles and improve the water solubility of curcumin at the same time, which showed enhanced antibacterial activity toward Gram-negative P.aeruginosa and Gram-positive S.aureus compared with sliver-decorated micelle and curcumin-loaded micelle alone, due to the cooperative antibacterial effects of the silver nanoparticles and curcumin. Furthermore, the achieved combinational micelles had good biocompatibility and low hemolytic activity. Thus, our study provides a new pathway in the rational design of combination strategy for efficiently preventing the ubiquitous bacterial infections.

FRET-enabled monitoring of the thermosensitive nanoscale assembly of polymeric micelles into macroscale hydrogel and sequential cognate micelles release.

Thermosensitive "micellar hydrogel" is prepared based on poly(ε-caprolactone-co- 1,4,8-trioxa[4.6]spiro-9-undecanone)-b-poly(ethylene glycol)- b-poly(ε-caprolactone- co-1,4,8-trioxa[4.6]spiro-9-undecanone) (PECT) triblock copolymer. Fluorescence resonance energy transfer (FRET) is adopted to explore its assembly (formation) and disassembly (degradation) mechanism within the range of 10 nm. Results prove that the thermosensitive non-covalent aggregation of micelles facilitates the hydrogel formation and the sustained shedding of cognate micelles induces the hydrogel degradation, during which polymers are steadily incorporated in micelles without any micelle disassembly or reassembly. It is confirmed that using multiple-tags based imaging technology, such as FRET imaging, the fate of macro biodegradable materials in vitro and in vivo can be followed at a precise nano even molecular level. Such an unique hydrogel composed of nothing more than PECT micelles can act as not only an injectable nanomedicine reservoir by subcutaneous or peri-tissue administration, but also an advanced "combo" macroscale platform for co-delivery of multi-modal therapeutic agents. Our findings also indicate that biological stimuli (e.g., temperature, enzymes)-induced non-covalent micelle self-assembly may provide us an effective strategy to prepare a macroscale device from nanoscale subunits.

A flexible nanofiber-based membrane with superhydrophobic pinning properties.

A nanofiber-based TiO2(B)/carbon nanofiber membrane has been synthesized by a facile and effective route that incorporates electrospinning approach with hydrothermal method. The prepared membrane shows high flexibility and hydrophilicity. After treatment with a low surface energy fluorosilane, the obtained superhydrophobic surface endows the membrane a high adhesive force due to the hybrid microstructure of TiO2(B) nanotubes and nanoplates on fibers. A water droplet on the surface of the membrane appears spherical in shape, which cannot roll off even when the membrane is bent and turned upside down. When a water droplet dropped from a certain height above the tilt membrane, the rolled water droplet can be stopped after a small displacement. In addition, a 12 µl water droplet can be quickly captured from a hydrophobic surface by curvature change of the superhydrophobic TiO2(B)/carbon nanofiber membrane. The membrane with excellent static and dynamic pinning performance to water may be expected to apply to biomedical and microfluidic devices.

[BIOCOMPATIBILITY OF POROUS POLY LACTIC ACID/BONE MATRIX GELATIN COMPOSITE BIOMATERIALS FOR BONE REPAIR].

OBJECTIVE: To evaluate the biocompatibility of poiy lactic acid/bone matrix gelatin (PLA/BMG) composite biomaterial so as to lay a foundation for bone defect repair. METHODS: Rats' MC3T3-E1 cells were cultured with leaching solution of PIJA/BMG and PLA material respectively for 7 days. The cell proliferation rate was tested by MTT and cell toxicity grading was carried out everyday. The PLA/BMG and MG3T3-E1 cells were co-cultured, the cell shape and proliferation were observed by inverted phase contrast microscope at 1, 3, and 5 days and cell adhesion by scanning electron microscope at 5 days. The PLA and PLA/BMG were implanted subcutaneously ilS Wistar rats. The histological observation was done, and the thickness of fibrous membrane, the number of inflammatory cells, and the vascularization area were measured at postoperative 2nd, 4th, and 8th week. RESULTS: The tests for cytotoxicity in vitro showed that the cell proliferation rates were over 100% and the cell cytotoxic grades were grade 0 at 1-7 days in PLA/BMG group. While in PLA group, the cell proliferation rates were less than 100% and the cell cytotoxic grades were grade 1 at 2, 4, and 7 days. After co-culture of PLA/BMG and MC3T3-E1 cells, cells grew on the surface and in the pores of PLA! BMG, and the cellular morphology was triangle or polygon with abundant microvillus on the surface. After subcutaneous implantation, the rats survived to the end of experiment, and incision healed well. PLA was wrapped by connective tissue where there were a lot of lymphocytes and neutrophiic granulocytes. The cells and tissue grew slowly in PLA. The PLA! BMG materials were wrapped by utile connective tissue where there were a few inflammatory cells. The connective tissue growth was observed in the center of PLA/BMG. There was no significant difference in the thickness of fibrous membrane between 2 groups at each time point (P>0.05). The number of inflammatory cells of PLA/BMG group were significantly less than those in PLA group at 2, 4, and 8 weeks (P<0.05); the vascularization area was significantly larger than that in PLA group (P<0.05). CONCLUSION: PLA/BMG composite biomaterials prepared by super critical-CO2 technique are good in cell and tissue biocompatibilty.

Synthesis, characterization and evaluation of dewatering properties of chitosan-grafting DMDAAC flocculants.

Flocculation is one of the most widely applied techniques for water treatment and sludge dewatering. A fresh environmentally friendly and powerful flocculant is highly eager in the sludge dewatering area. In this work, a highly efficient cationic flocculant, chitosan-g-PDMDAAC was synthesized through grafting a monomer, dimethy ldiallyl ammonium chloride(DMDAAC), onto chitosan initiated by ceric sulfate under ultrasonic-assisted and conventional heating condition. The graft copolymer was characterized using FT-IR, XRD and SEM. Further, the dewatering performance of municipal activated sludge was evaluated by the filter cake moisture content and specific resistance in filtration. Its application as a flocculant for wastewater treatment was investigated. The prepared chitosan-g-PDMDAAC showed a highly effective flocculation capability for activated sludge compared with chitosan, polyacrylamide(PAM), cationic polyacrylamide(CPAM).