Preimplantation genetic testing for monogenic disorders (PGT-M) offers an alternative strategy to prevent children from being born with hereditary neurological diseases or metabolic diseases dominated by nervous system phenotypes: a retrospective study.

BACKGROUND: Preimplantation genetic testing for monogenic disorders (PGT-M) is now widely used as an effective strategy to prevent various monogenic or chromosomal diseases. MATERIAL AND METHODS: In this retrospective study, couples with a family history of hereditary neurological diseases or metabolic diseases dominated by nervous system phenotypes and/or carrying the pathogenic genes underwent PGT-M to prevent children from inheriting disease-causing gene mutations from their parents and developing known genetic diseases. After PGT-M, unaffected (i.e., normal) embryos after genetic detection were transferred into the uterus of their corresponding mothers. RESULTS: A total of 43 carrier couples with the following hereditary neurological diseases or metabolic diseases dominated by nervous system phenotypes underwent PGT-M: Duchenne muscular dystrophy (13 families); methylmalonic acidemia (7 families); spinal muscular atrophy (5 families); infantile neuroaxonal dystrophy and intellectual developmental disorder (3 families each); Cockayne syndrome (2 families); Menkes disease, spinocerebellar ataxia, glycine encephalopathy with epilepsy, Charcot-Marie-Tooth disease, mucopolysaccharidosis, Aicardi-Goutieres syndrome, adrenoleukodystrophy, phenylketonuria, amyotrophic lateral sclerosis, and Dravet syndrome (1 family each). After 53 PGT-M cycles, the final transferable embryo rate was 12.45%, the clinical pregnancy rate was 74.19%, and the live birth rate was 89.47%; a total of 18 unaffected (i.e., healthy) children were born to these families. CONCLUSIONS: This study highlights the importance of PGT-M in preventing children born with hereditary neurological diseases or metabolic diseases dominated by nervous system phenotypes.

Coking-Resistant Polyethylene Upcycling Modulated by Zeolite Micropore Diffusion.

Although the mass production of synthetic plastics has transformed human lives, it has resulted in waste accumulation on the earth. Here, we report a low-temperature conversion of polyethylene into olefins. By mixing the polyethylene feed with rationally designed ZSM-5 zeolite nanosheets at 280 °C in flowing hydrogen as a carrier gas, light hydrocarbons (C1-C7) were produced with a yield of up to 74.6%, where 83.9% of these products were C3-C6 olefins with almost undetectable coke formation. The reaction proceeds in multiple steps, including polyethylene melting, flowing to access the zeolite surface, cracking on the zeolite surface, formation of intermediates to diffuse into the zeolite micropores, and cracking into small molecules in the zeolite micropores. The ZSM-5 zeolite nanosheets kinetically matched the cascade cracking steps on the zeolite external surface and within micropores by boosting the intermediate diffusion. This feature efficiently suppressed the intermediate accumulation on the zeolite surface to minimize coke formation. In addition, we found that hydrogen participation in the cracking process could hinder the formation of polycyclic species within zeolite micropores, which also contributes to the rapid molecule diffusion. The coking-resistant polyethylene upcycling process at a low temperature not only overturns the general viewpoint for facile coke formation in the catalytic cracking over the zeolites but also demonstrates how the polyethylene-based plastics can be upcycled to valuable chemicals. In addition to the model polyethylene, the reaction system worked efficiently for the depolymerization of multiple practically used polyethylene-rich plastics, enabling an industrially and economically viable path for dealing with plastic wastes.

Synthesis of Silver Nanoparticles and Detection of Glucose via Chemical Reduction with Nanocellulose as Carrier and Stabilizer.

The application of silver nanoparticles (AgNPs) in antibacterial materials, glucose detection, etc., is of broad interest for researchers around the world. Nanocellulose with many excellent properties can be used as a carrier and stabilizer to assist in the synthesis of AgNPs. In this study, cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) were used to assist in the synthesis of AgNPs under the reduction of glucose and detection of glucose concentration under different conditions. Transmission electron microscopy (TEM) analysis showed that the AgNPs in the nanocellulose-AgNPs (NC-AgNPs) system were roughly spherical and randomly distributed on the nanocellulose. In the whole reaction system, when the concentration of nanocellulose is 0.11 mg/mL, the concentration of silver ammonia solution is 0.6 mM, and the mixing time is 2.5 h, according to the UV-Vis analysis, the absorbance of CNF-AgNPs at 425 nm exhibited a good linear relationship (R2 = 0.9945) with the glucose concentration range (5-50 µM), while the absorbance of CNC-AgNPs at 420 nm showed a good linear relationship (R2 = 0.9956) with the glucose concentration range (5-35 µM). The synthesis of NC-AgNPs can be further developed into a sensor with higher sensitivity and higher stability for detecting glucose concentration and a material with antibacterial effects.

Antimicrobial effect of photodynamic therapy using sinoporphyrin sodium and 390-400 nm light-emitting diode on Porphyromonas gingivalis in vitro.

This study aims to investigate the effect of antimicrobial photodynamic therapy (a-PDT) using a novel combination of sinoporphyrin sodium (DVDMS) and light-emitting diode (LED) with a wavelength of 390-400 nm on Porphyromonas gingivalis in vitro. Absorption spectrum of DVDMS was determined by spectrometer for selecting suitable wavelength light source. The uptake of DVDMS by P. gingivalis was evaluated according to fluorescence intensity detected by a spectrometer. Then effects of DVDMS alone, 390-400 nm LED alone, and photodynamic therapy produced by 10, 20, 40, and 80 µg/mL DVDMS and 390-400 nm LED on the suspension of P. gingivalis were evaluated by counting the number of colony forming units (CFU) after incubation. In the experiment, the LED illumination time was 30, 60, 90, 120, 180, 240, and 360 s, respectively, and the corresponding energy density was 1, 2, 3, 4, 6, 8, and 12 J/cm2, respectively. According to the absorption spectrum of DVDMS, the 390-400-nm light emitted by the LED was selected as the light source. The fluorescence intensity of DVDMS on P. gingivalis increased significantly at 5 min, and with the extension of time, it decreased at 30 min. DVDMS alone did not produce a significant toxicity on P. gingivalis compared with PBS (p = 0.979). While 390-400 nm LED alone had a certain bactericidal effect on P. gingivalis, the bactericidal effect was more obvious as the light dose increased (p < 0.001). The effect of a-PDT produced by 20, 40, and 80 µg/mL DVDMS and 390-400 nm LED were significantly better than that of 390-400 nm LED alone (p < 0.05). Both DVDMS concentration and light dose could enchance the bactericidal effect. The strongest photo-killing effect was generated by 80 µg/mL DVDMS with 360 s illumination (energy density is 12 J/cm2), and the log reduction of bacteria was 5.69 ± 1.70. a-PDT using the combination of DVDMS with 390-400 nm LED shows promise as a new treatment modality for pathogens elimination in periodontal therapy.

HD-ZIP IV gene Roc8 regulates the size of bulliform cells and lignin content in rice.

The morphology of bulliform cells located on the upper epidermis of leaves is one of the most important cell structures affecting leaf shape. Although many mechanisms regulating the development of bulliform cells have been reported, the fine regulatory mechanisms governing this process have rarely been described. To identify novel components regulating rice leaf morphology, a mutant showing a constitutively rolling phenotype from the seedling stage to flowering, known as crm1-D, was selected for further analysis. Anatomical analyses in crm1-D were attributable to the size reduction of bulliform cells. The crm1-D was controlled by a single dominant nuclear gene. Map-based cloning revealed that Roc8, an HD zipper class IV family member, was responsible for the crm1-D phenotype. Notably, the 50-bp sequence in the 3'-untranslated region (3'-UTR) of the Roc8 gene represses Roc8 at the translational level. Moreover, the roc8 knockdown lines notably increased the size of bulliform cells. A series of assays revealed that Roc8 negatively regulates the size of bulliform cells. Unexpectedly, Roc8 was also observed to positively mediate lignin biosynthesis without incurring a production penalty. The above results show that Roc8 may have a practical application in cultivating materials with high photosynthetic efficiency and low lignin content.

Antitumor mechanism of MAP30 in bladder cancer T24 cells, and its potential toxic effects in mice.

To investigate the antitumor mechanism of MAP30 in human bladder cell line (T24) and its potential toxic effects in mice.  In this study, the biological behavior of MAP30's influence on bladder cell was investigated to reveal the antitumor mechanism and role of MAP30 in bladder cancer. MAP30 gene sequence optimized by gene synthesis codon was inserted into the prokaryotic expression vector pET-28a to produce a large amount of target protein in Escherichia coli. The protein product was obtained after purification. Membrane hydration method was used to prepare MAP30 liposome in order to enhance its membrane permeability. The effects of MAP30 on the viability, apoptosis and migration of T24 cell were assessed using 3­(4,5­dimethyl­thiazol­2­yl)­2,5­diphenyl­2H­tetrazolium bromide (MTT), flow cytometric and TUNEL assays, respectively. Mice were transfected with bladder cancer cells for 48 h. The expressions of apoptotic and non-apoptotic proteins were determined using Western blotting. Changes in tumor volume and occurrence of metastasis were assessed using luciferase assay. After 7 days, liver and kidney were excised for histological examination. The levels of reactive oxygen species (ROS), malondialdehyde (MDA), and reduced glutathione (GSH), and activities of catalase and glutathione peroxidase (GPx) were determined in serum or homogenate using enzyme-linked immunosorbent assay (ELISA). The yield of MAP30 after purification was significantly increased. The results of MTT assay showed that MAP30 significantly and concentration-dependently inhibited the proliferation and migration of T24 cells (p < 0.05). The prepared liposomes had uniform hydrated particle size of 132.6 nm, with encapsulation efficiency of 78 %. The inhibitory effect of MAP30 liposome on T24 cells was significantly higher than that of MAP30, and MAP30 significantly increased the number of apoptotic cells (p < 0.05). Western blotting showed that MAP30 significantly promoted the expression of caspase 3 (p < 0.05), but did not significantly affect the expressions of bcl-2 and bax (p > 0.05). It also significantly down-regulated the expressions of NF-kB, JNK and MMP2 (p < 0.05). Tumor formation was significantly inhibited, and tumor volume reduced in bladder cancer-bearing mice after treatment with MAP30 (p < 0.05). Histological examination showed that MAP30 induced mild histological changes in the liver and kidney of mice, and significantly increased the level of MDA at day 1 (p < 0.05). It also significantly and time-dependently increased ROS, but reduced GSH levels and activities of catalase and GPx (p < 0.05). However, MAP30 had no significant effect on DNA (p > 0.05). The apoptotic effect of MAP30 in T24 cells is mediated via activation of caspase-3 signaling pathway. The protein produces mild histological changes in the liver and kidney of mice, but has no significant effect on DNA.

Improved antibacterial effects of alkali-transformed saponin from quinoa husks against halitosis-related bacteria.

BACKGROUND: Quinoa is a food crop native to the Andes. The process of dehulling quinoa can produce approximately 8-12% husk, which is often discarded because it contains bitter saponin. Saponin derived from quinoa has been reported to exhibit anti-inflammatory and antifungal activity. However, the antibacterial effects of quinoa saponin against halitosis-related bacteria are still unclear. METHODS: In this study, quinoa saponin (QS) and alkali-transformed saponin (ATS) were separated by AB-2 resin to obtain QS-30, QS-80, ATS-30 and ATS-80. Halitosis-related bacteria included Porphyromonas gingivalis (P. gingivalis), Clostridium perfringens (C. perfringens) and Fusobacterium nucleatum (F. nucleatum). The MIC and MBC were determined using gradient dilutions in 96-well plates, and the saponins were identified by HPLC and mass spectrometry. The changes in membrane integrity were tested using a microplate reader, the membrane potential was tested by spectrofluorometry, and the morphological characteristics were examined using a transmission electron microscope to explore the antibacterial mechanisms. RESULTS: Antibacterial assays indicated that QS-80 and ATS-80 showed inhibitory activity. In addition, ATS-80 exerted a stronger inhibitory effect than QS-80, especially against Fusobacterium nucleatum, with a lower minimum inhibitory concentration (31.3 µg/mL) and a lower minimum bactericidal concentration (125 µg/mL). ATS-80 destroyed the bacterial membrane structure, leading to bacterial death. CONCLUSIONS: Based on the excellent antibacterial activity and economic prospects of quinoa husk, ATS-80 could be used as an antibacterial agent to treat halitosis.

Molecularly imprinted Photoelectrochemical sensor for Escherichia coli based on Cu:ZIF-8/KZ3TTz heterojunction.

Herein, a signal stable molecularly imprinted photoelectrochemical (MIP-PEC) sensing platform was designed to sensitively detect Escherichia coli by incorporating polythiophene film with Cu: ZIF-8/KZ3TTz heterojunction. Attributed to the formation of a staggered type II heterostructure between KZ3TTz and Cu: ZIF-8 semiconductors, the Cu: ZIF-8/KZ3TTz heterojunction exhibited stable and significant cathode PEC response. Impressively, selective MIP film was grown on the surface of Cu: ZIF-8/KZ3TTz/GCE by electro-polymerization of 2,2-Dimethyl-5-(3-thienyl)-1,3-dioxane-4,6-dione (DTDD) in the presence of E. coli. After removing E. coli, more electrons were transferred to the electrolyte solution through the imprinting cavity on the MIP film, which was eliminated by O2 in the electrolyte, causing further enhancement of the cathode PEC response. On the contrary, when the imprinted cavity was filled with E. coli, the cathodic PEC response gradually decreased due to steric hindrance effect. The sensor showed excellent linearity in the range of 101 to 108 CFU/mL with a detection limit of 4.09 CFU/mL (S/N = 3). This strategy offered a novel approach for pathogenic bacteria detection in food safety and environmental monitoring.

Characterization of microplastic-derived dissolved organic matter in freshwater: Effects of light irradiation and polymer types.

This study investigated the impacts of light irradiation and polymer types on the leaching behavior of dissolved organic matter (DOM) from microplastics (MPs) in freshwater. Polypropylene had the highest leaching capacity of DOM after photoaging, followed by polystyrene (PS), polyamide (PA) and polyethylene terephthalate (PET). While similarly low levels of DOM were observed in the remaining 5 MP suspensions under UV irradiation and in almost all MP suspensions (except PA) under darkness. These suggest that the photooxidation of some buoyant plastics may influence the carbon cycling of nature waters. Among 9 MP-derived leachates, PET leachates had the highest chromophoric DOM concentration and aromaticity, probably owing to the special benzene rings and carbonyl groups in PET structures and its fast degradation rate. Protein-like substances were the primary fluorescent DOM in MP suspensions (except PS), especially in darkness no other fluorescent substances were found. Considering the bio-labile properties of proteins together, MPs regardless of floating or suspended in an aquatic environment may have prevalent long-term effects on microbial activities. Besides, from monomers to hexamers with newly formed chemical bonds were identified in UV-irradiated MP suspensions. These results will contribute to a deep insight into the potential ecological effects related to MP degradation.

Bactericidal effects of hematoporphyrin monomethyl ether-mediated photosensitization against pathogenic communities from supragingival plaque.

Photodynamic antimicrobial chemotherapy (PACT) is proposed as a potential candidate to inactivate pathogens in localized infections due to the rapid evolution of bacterial resistance. The treatment modality utilizes nontoxic agents called photosensitizers and harmless visible light to generate reactive oxygen species which result in microbial cells' killing. Hematoporphyrin monomethyl ether (HMME) as a novel and affordable photosensitizer has been used in treating various clinical diseases for years, but few applications in infection. In this report, we studied the bactericidal effects of the HMME-mediated photodynamic reaction on the pathogenic microbes in supragingival plaque which can lead to many oral infectious diseases such as caries, gingivitis, and so on. Our findings demonstrated that HMME promoted an effective action in bacterial reduction with the application of laser energy. Moreover, the antimicrobial activities were dramatically enhanced as the HMME concentration and exposure time were increased, but reached a plateau when matched the appropriate agent concentration and illumination. It was found that the survival fraction of microorganisms is exponentially dependent on the product of HMME concentration and irradiation time. These promising results suggest the HMME may be an excellently cost-effective photosensitizing agent for mediating PACT in the treatment of supragingival plaque-related diseases. An optimized HMME concentration and irradiation time has been found to achieve the best results under our experimental conditions. The high HMME concentration matching short curative time, or vice versa, can achieve the similar therapeutic effect, which may provide more flexible treatment plans according to specific conditions.

Non-destructive preservation state estimation of waterlogged archaeological wooden artifacts.

Non-destructive preservation state estimation is an essential prerequisite for the preservation and conservation of waterlogged archaeological wooden artifacts. Herein, Near Infrared (NIR) spectroscopy coupled with orthogonal partial least squares discriminant analysis (OPLS-DA) were applied to assess sixty-four waterlogged archaeological woods collected from seven excavation sites in the period range of 2900 BCE-1912 CE, aiming at developing a non-destructive, accurate and rapid preservation state estimation methodology. The role of non-decayed recent wood of relevant species on preservation state estimation was studied in prior, showing the use of non-decayed recent wood could not improve the predictive ability. Besides, the high variability in terms of chemical structure between archaeological softwoods and archaeological hardwoods did affect the preservation state estimation. Thus, a simple OPLS-DA model of non-destructively distinguishing archaeological hardwoods from softwoods, R2Xcum of 0.659, R2Ycum of 0.836 and Q2cum of 0.763, was established to avoid and overcome destructive approach for wood identification. Then, the well-defined three grouped separations of slightly-decayed, moderately-decayed and severely-decayed waterlogged archaeological woods were revealed in OPLS-DA models, providing R2Xcum of 0.793, R2Ycum of 0.738, Q2cum of 0.680, and R2Xcum of 0.780, R2Ycum of 0.901, Q2cum of 0.870, for waterlogged archaeological hardwoods and waterlogged archaeological softwoods respectively. Potential predictive wood spectral bands were screened and tentatively identified as hydroxyls of crystalline cellulose, acetyl groups of hemicelluloses, C-H bands of lignin, which guaranteed the elimination of non-structural compounds, such as water and inorganic components interference. Furthermore, the developed NIR methodology was validated by an extensively used destructive method consisting of anatomical characteristics, maximum water content and basic density analyses. The results indicated that NIR coupled to chemometrics could non-destructively and accurately predict the preservation states of waterlogged archaeological wooden artifacts and avoid the interference of water and inorganic deposits.

Aggregation kinetics and mechanisms of silver nanoparticles in simulated pollution water under UV light irradiation.

This paper investigated the effect mechanism of complex components (fulvic acid [FA], sodium dodecylbenzene sulfonate [SDBS], and sodium nitrate [NaNO3 ]) on the aggregation kinetics of polyvinylpyrrolidone-modified silver nanoparticles (PVP-AgNPs) under UV irradiation. The results showed that FA and NaNO3 alone did not cause aggregation due to the high steric hindrance and/or electrostatic repulsive forces. In high concentration of SDBS solution (20-50 mM), the stability of PVP-AgNPs was reduced by adsorbing SDBS on nanoparticle surface and replacing their PVP coatings. A mixed system of two pollutants had a synergistic effect on PVP-AgNPs aggregation. In the mixed system of SDBS and FA, the interaction of SDBS and PVP-AgNPs dominated the aggregation of PVP-AgNPs. NaNO3 significantly improved the aggregation rate of PVP-AgNPs in SDBS solution due to the charge neutralization effect of electrolyte. In 20 mg/L FA solution, the aggregation rate increased slightly with increasing NaNO3 concentration from 50 to 200 mM due to the charge neutralization effect, while the hydrodynamic diameters of PVP-AgNPs increased linearly and rapidly to micrometer size because the spatial conformation of adsorbed FA became compact in high-salinity solution. The calculation results of eDLVO theory were basically consistent with most of the experimental results. PRACTITIONER POINTS: PVP-AgNPs was uniformly dispersed in NaNO3 or FA solution under UV irradiation. PVP-AgNPs formed aggregates in SDBS solutions under UV irradiation. A system with two mixed pollutants had a synergistic effect on promoting aggregation of PVP-AgNPs. eDLVO theory could explain the aggregation results in different chemical conditions except in NaNO3 solution.

A circRNA-miRNA-mRNA network plays a role in the protective effect of diosgenin on alveolar bone loss in ovariectomized rats.

BACKGROUND: The present study aimed to assess the perturbation in circular RNA (circRNA)/mRNA expression profiles and a circRNA-miRNA-mRNA coexpression network involved in the potential protective effect of diosgenin (DIO) on alveolar bone loss in rats subjected to ovariectomy (OVX). METHODS: The Wistar rats (female) manipulated with sham operation were classified as the SHAM group and the grouping of OVX rats administered with DIO, estradiol valerate or vehicle for 12 weeks was DIO group, EV group and OVX group respectively. Following treatments, the plasmatic levels of osteocalcin and tumor necrosis factor-alpha and the microstructure of alveolar bone were assayed. Based on microarray analyses, we identified differentially expressed (DE) circRNAs and mRNAs in alveolar bone of rats in both OVX and DIO group. The DE circRNAs and DE mRNAs involved in the bone metabolism pathway validated by RT-qPCR were considered key circRNAs/mRNAs. On the basis of these key circRNAs/mRNAs, we predicted the overlapping relative miRNAs of key circRNAs/mRNAs, and a circRNA-miRNA-mRNA network was built. RESULTS: DIO showed an anti-osteopenic effect on the rat alveolar bone loss induced by OVX. In total, we found 10 DE circRNAs (6 downregulated and 4 upregulated) and 614 DE mRNAs (314 downregulated and 300 upregulated) in samples of the DIO group compared with those of the OVX group. However, only one circRNA (rno_circRNA_016717) and seven mRNAs (Sfrp1, Csf1, Il1rl1, Nfatc4, Tnfrsf1a, Pik3c2g, and Wnt9b) were validated by qRT-PCR and therefore considered key circRNA/mRNAs. According to these key circRNA/mRNAs and overlapping predicted miRNAs, a coexpression network was constructed. After network analysis, one circRNA-miRNA-mRNA axis (circRNA_016717/miR-501-5p/Sfrp1) was identified. CONCLUSION: The mechanism of DIO inhibiting alveolar bone loss after OVX is possibly relevant to the simultaneous inhibition of osteogenesis and osteoclastogenesis by mediating the expression of important molecules in the Wnt, PI3K, RANK/RANKL or osteoclastogenic cytokine pathways. The circRNA_016717/miR-501-5p/Sfrp1 axis may play important roles in these processes.

Facile Fabrication of Hierarchical MOF-Metal Nanoparticle Tandem Catalysts for the Synthesis of Bioactive Molecules.

Multifunctional metal-organic frameworks (MOFs) that possess permanent porosity are promising catalysts in organic transformation. Herein, we report the construction of a hierarchical MOF functionalized with basic aliphatic amine groups and polyvinylpyrrolidone-capped platinum nanoparticles (Pt NPs). The postsynthetic covalent modification of organic ligands increases basic site density in the MOF and simultaneously introduces mesopores to create a hierarchically porous structure. The multifunctional MOF is capable of catalyzing a sequential Knoevenagel condensation-hydrogenation-intramolecular cyclization reaction. The unique selective reduction of the nitro group to intermediate hydroxylamine by Pt NPs supported on MOF followed by intramolecular cyclization with a cyano group affords an excellent yield (up to 92%) to the uncommon quinoline N-oxides over quinolines. The hierarchical MOF and polyvinylpyrrolidone capping agent on Pt NPs synergistically facilitate the enrichment of substrates and thus lead to high activity in the reduction-intramolecular cyclization reaction. The bioactivity assay indicates that the synthesized quinoline N-oxides evidently inhibit the proliferation of lung cancer cells. Our findings demonstrate the feasibility of MOF-catalyzed direct synthesis of bioactive molecules from readily available compounds under mild conditions.

Protective effect of Rhizoma Dioscoreae extract against alveolar bone loss in ovariectomized rats via regulation of IL-6/STAT3 signaling.

The aim of the present study was to assess the effectiveness of Rhizoma Dioscoreae extract (RDE) on preventing rat alveolar bone loss induced by ovariectomy (OVX), and to determine the role of interleukin-6 (IL-6)/signal transducer and activator of transcription 3 (STAT3) signaling pathway in this effect. Female Wistar rats were subjected to OVX or sham surgery. The rats that had undergone OVX were treated with RDE (RDE group), vehicle (OVX group) or 17ß-estradiol subcutaneous injection (E2 group). Subsequently, bone metabolic activity was assessed by analyzing 3-D alveolar bone construction, bone mineral density, as well as the plasma biomarkers of bone turnover. The gene expression of alveolar bone in the OVX and RDE groups was evaluated by IL-6/STAT3 signaling pathway polymerase chain reaction (PCR) arrays, and differentially expressed genes were determined through reverse transcription-quantitative PCR. The inhibitory effect of RDE on alveolar bone loss in the OVX group was demonstrated in the study. In comparison with the OVX group, the RDE group exhibited 19 downregulated genes and 1 upregulated gene associated with the IL-6/STAT3 signaling pathway in alveolar bone. Thus, RDE was shown to relieve OVX-induced alveolar bone loss in rats, an effect which was likely associated with decreased abnormal bone remodeling via regulation of the IL-6/STAT3 signaling pathway.

Changes on structural properties of biomass pretreated by combined deacetylation with liquid hot water and its effect on enzymatic hydrolysis.

A novel combined pretreatment of deacetylation and liquid hot water (LHW) was invented which has been proved to be effective in increasing enzymatic hydrolysis yield of biomass. In order to further understand the effect of this new pretreatment process on biomass, the variation on structural properties including cellulose crystallinity index (CrI), specific surface area (SSA) and degree of polymerization (DP) before/after pretreatment and how these properties affected the enzymatic hydrolysis of biomass were explored. The improvement of pretreatment severity (PS) could increase CrI, SSA and reduce DP. Whereas the enhancement of degree of deacetylation could decrease SSA and DP. An optimal formula (E12Y=0.347(100-CrI)(-0.375)×(SSA)(0.203)×(1700-DP)(0.281)) was achieved to express the correlation between structural properties and enzymatic hydrolysis after 12h. The enzymatic yield was more sensitive to CrI than to SSA and DP.

The effect of non-structural components and lignin on hemicellulose extraction.

As the important structural component of corn stover, hemicellulose could be converted into a variety of high value-added products. However, high quality hemicellulose extraction is not an easy issue. The present study aims to investigate the effects of non-structural components (NSCs) and lignin removal on alkaline extraction of hemicellulose. Although NSCs were found to have a minimal effect on hemicellulose dissolution, they affected the color values of the hemicellulose extracts. The lignin limited the hemicellulose dissolution and increased the color value by binding to hemicellulose molecules and forming lignin-carbohydrate complexes. Sodium chlorite method can remove about 90% lignin from corn stover, especially the lignin connected to hemicellulose through p-coumaric and ferulic acids. Which increased the hemicellulose dissolution ratio to 93% and reduced the color value 14-28%, but the cost is about 20% carbohydrates lost.

Rhizoma Dioscoreae extract protects against alveolar bone loss by regulating the cell cycle: A predictive study based on the protein­protein interaction network.

Rhizoma Dioscoreae extract (RDE) exhibits a protective effect on alveolar bone loss in ovariectomized (OVX) rats. The aim of this study was to predict the pathways or targets that are regulated by RDE, by re­assessing our previously reported data and conducting a protein­protein interaction (PPI) network analysis. In total, 383 differentially expressed genes (≥3­fold) between alveolar bone samples from the RDE and OVX group rats were identified, and a PPI network was constructed based on these genes. Furthermore, four molecular clusters (A­D) in the PPI network with the smallest P­values were detected by molecular complex detection (MCODE) algorithm. Using Database for Annotation, Visualization and Integrated Discovery (DAVID) and Ingenuity Pathway Analysis (IPA) tools, two molecular clusters (A and B) were enriched for biological process in Gene Ontology (GO). Only cluster A was associated with biological pathways in the IPA database. GO and pathway analysis results showed that cluster A, associated with cell cycle regulation, was the most important molecular cluster in the PPI network. In addition, cyclin­dependent kinase 1 (CDK1) may be a key molecule achieving the cell­cycle­regulatory function of cluster A. From the PPI network analysis, it was predicted that delayed cell cycle progression in excessive alveolar bone remodeling via downregulation of CDK1 may be another mechanism underling the anti­osteopenic effect of RDE on alveolar bone.

Effect of polyoxypropylene chain length on the critical micelle concentration of propylene oxide-ethylene oxide block copolymers.

In this work, the surface activity of block copolymer nonionic surfactants (RPE) has been determined, i.e., critical micelle concentration (CMC), surface excess concentration (gamma), surface area demand per molecule (A), surface tension at CMC (gamma(CMC)). A linear decrease of ln[CMC] vs number of oxypropylene units in copolymer molecule was observed. The change in the work of cohesion per oxypropylene group when passing from molecular into micellar state, calculated from the Shinoda equation, was 0.43 kT for the studied compounds.

Microwave-assisted fabrication of strontium doped apatite coating on Ti6Al4V.

Strontium has been shown to be a beneficial dopant to calcium phosphates when incorporated at nontoxic level. In the present work we studied the possibility of solution derived doping strontium into calcium phosphate coatings on titanium alloy Ti6Al4V based implants by a recently reported microwave-assisted method. By using this method strontium doped calcium phosphate nuclei were deposited to pretreated titanium alloy surface dot by dot to compose a crack-free coating layer. The presence of strontium in solution led to reduced roughness of the coating and finer nucleus size formed. In vitro study found that proliferation and differentiation of osteoblast cells seeded on the coating were influenced by strontium content in coatings, showing an increasing followed by a decreasing behavior with increasing substitution of calcium by strontium. It is suggested that this new microwave-assisted strontium doped calcium phosphate coatings may have great potential in implant modification.