Recent Advances in Tailored Fabrication and Properties of Biobased Self-Healing Polyurethane.

With the emergence of challenges in the environmental degradation and resource scarcity fields, the research of biobased self-healing polyurethane (BSPU) has become a prevailing trend in the technology of the polyurethane industry and a promising direction for developing biomass resources. Here, the production of BSPU from lignocellulose, vegetable oil, chitosan, collagen, and coumarin is classified, and the principles of designing polyurethane based on compelling examples using the latest methods and current research are summarized. Moreover, the impact of biomass materials on self-healing and mechanical properties, as well as the tailored performance method, are presented in detail. Finally, the applications of BSPU in biomedicine, sensors, coatings, etc. are also summarized, and the possible challenges and development prospects are explored to helpfully make progress in the development of BSPU. These findings demonstrate valuable references and practical significance for future BSPU research.

Drug-Coated Balloon in Primary Percutaneous Coronary Intervention.

According to the latest coronary interventional guidelines, a drug-eluting stent is the recommended reperfusion therapy in primary percutaneous coronary intervention (pPCI). However, deficiencies and defects, such as in-stent restenosis (ISR), incomplete stent apposition, stent thrombosis, reinfarction after stent implantation, long-term dual antiplatelet drug use, and adverse reactions of metal implants, plague clinicians and patients. Drug-coated balloon (DCB), which delivers antiproliferative agents into the vessel wall without stent implantation and leaves no implants behind after the procedure, is a novel option for percutaneous coronary intervention and has proven to be a promising strategy in cases of ISR, small vessel coronary artery disease, and bifurcation lesions. However, most of the available experience has been gained in elective percutaneous coronary intervention, and experience in pPCI is lacking. The current evidence for the use of DCB-only in pPCI was discussed and analyzed in this review.

Study on Dissociation and Chemical Structural Characteristics of Areca Nut Husk.

From the perspective of full-component utilization of woody fiber biomass resources, areca nut husk is an excellent woody fiber biomass feedstock because of its fast regeneration, significant regeneration ability, sustainability, low cost, and easy availability. In this study, fiber cell morphologies, chemical compositions, lignin structures, and carbohydrate contents of areca nut husks were analyzed and compared with those of rice straw, and the application potentials of these two materials as biomass resources were compared. We found that areca nut husk fibers were shorter and wider than those of rice straw; areca nut husk contained more lignin and less ash, as well as less holocellulose than rice straw; areca nut husk and rice straw lignin were obtained by ball milling and phase separation, and areca nut husk lignin was found to be a typical GHS-type lignin. Herein, the yield of lignocresol was higher than that of milled wood lignin for both raw materials, and the molecular size was more homogeneous. Tricin structural monomers were discovered in the lignin of areca nut husk, similar to those present in other types of herbaceous plants. Structures of areca nut husk MWL (AHMWL) and AHLC were comprehensively characterized by quantitative NMR techniques (that is, 1H NMR, 31P NMR, and 2D NMR). The molecular structure of AHLC was found to be closer to the linear structure with more functional groups exposed on the molecular surface, and the hydroxyl-rich p-cresol grafting structure was successfully introduced into the lignin structure. In addition, the carbohydrate content in the aqueous layer of the phase separation system was close to the carbohydrate content in the raw material, indicating that the phase separation method can precisely separate lignin from carbohydrates. These experimental results indicate that the phase separation method as a method for lignin utilization and structure study has outstanding advantages in lignin structure regulation and yield, and areca nut husk lignin is suitable for application in the same phase separation systems as short-period herbs, such as rice straw and wheat grass, and has the advantages of low ash content and high lignification degree, which will provide guidance for the high-value utilization of areca nut husk in the future.

The Synergistic Effects between Sulfobetaine and Hydrophobically Modified Polyacrylamide on Properties Related to Enhanced Oil Recovery.

In order to explore the mechanism responsible for the interactions in the surfactant-polymer composite flooding and broaden the application range of the binary system in heterogeneous oil reservoirs, in this paper, the influences of different surfactants on the viscosity of two polymers with similar molecular weights, partially hydrolyzed polyacrylamide (HPAM) and hydrophobically modified polyacrylamide (HMPAM), were studied at different reservoir environments. In addition, the relationship between the surfactant-polymer synergistic effects and oil displacement efficiency was also investigated. The experimental results show that for HPAM, surfactants mainly act as an electrolyte to reduce its viscosity. For HMPAM, SDBS and TX-100 will form aggregates with the hydrophobic blocks of polymer molecules, reducing the bulk viscosity. However, zwitterionic surfactant aralkyl substituted alkyl sulfobetaine BSB molecules can build "bridges" between different polymer molecules through hydrogen bonding and electrostatic interaction. After forming aggregates with HMPAM molecules, the viscosity will increase. The presence of two polymers all weakened the surfactant oil-water interfacial membrane strength to a certain extent, but had little effect on the interfacial tension. The synergistic effect of the "bridge" between HMPAM and BSB under macroscopic conditions also occurs in the microscopic pores of the core, which has a beneficial effect on improving oil recovery.

[Clinical and genetic analyses of Joubert syndrome in children]. / 儿童Joubertç»¼åˆå¾ä¸´åºŠåŠé—ä¼ å­¦åˆ†æž.

OBJECTIVES: To study the clinical and genetic features of Joubert syndrome (JS) in children. METHODS: A retrospective analysis was performed on the clinical data, genetic data, and follow-up data of 20 children who were diagnosed with JS in the Department of Children's Rehabilitation, the Third Affiliated Hospital of Zhengzhou University, from January 2017 to July 2022. RESULTS: Among the 20 children with JS, there were 11 boys and 9 girls. The common clinical manifestations were developmental delay (20 children, 100%), abnormal eye movement (19 children, 95%), and hypotonia (16 children, 80%), followed by abnormal respiratory rhythm in 5 children (25%) and unusual facies (including prominent forehead, low-set ears, and triangular mouth) in 3 children (15%), and no limb deformity was observed. All 20 children (100%) had the typical "molar tooth sign" and "midline cleft syndrome" on head images, and 6 children (30%) had abnormal eye examination results. Genetic testing was performed on 7 children and revealed 6 pathogenic genes, i.e., the CPLANE1, RPGRIP1L, MKS1, CC2D2A, CEP120, and AHI1 genes. CONCLUSIONS: For children with developmental delay, especially those with abnormal eye movement and hypotonia, it is recommended to perform a head imaging examination to determine the presence or absence of "molar tooth sign" and "midline cleft syndrome", so as to screen for JS to avoid missed diagnosis and misdiagnosis. There are many pathogenic genes for JS, and whole-exome sequencing can assist in the diagnosis of JS.

Simultaneous quantitative analysis of seven steroid hormones in human saliva: A novel method based on O-ethylhydroxylamine hydrochloride as derivatization reagent.

RATIONALE: Saliva has been widely accepted as a more convenient alternative to serum or plasma in the field of clinical diagnosis. However, the detection of trace components in saliva has been a bottleneck problem. The aim of this work was to develop a highly sensitive and reliable method for simultaneously determining the trace steroid hormones including some with poor ionization efficiency in human saliva by liquid chromatography/tandem mass spectrometry (LC/MS). METHODS: Saliva was deproteinated by acetonitrile containing mixed isotope internal standards and extracted with methyl tert-butyl ether. The extraction solution was dried under a stream of nitrogen and the residue was derivatized using 50 mM O-ethylhydroxylamine hydrochloride in 80% methanol/water solution (v/v). The processed sample was determined by LC/MS in multiple reaction monitoring (MRM) mode. RESULTS: The method was successfully established for the simultaneous quantification of seven steroid hormones in human saliva and showed excellent specificity and sensitivity. The limits of quantification (LOQs) of all steroid hormones were below 5 pg/mL, in particular, the LOQ of progesterone was as low as 0.15 pg/mL. The linear correlation coefficients (r) were greater than 0.9990 in the range of 2-200 pg/mL for T, DHEA, A4, P4, P5, and 17OHP4 and in the range of 5-500 pg/mL for 17OHP5. The intra-day and inter-day variability ranged from 1.86% to 7.83% and 1.95% to 10.4%, respectively. The recovery of the method ranged from 86.9% to 111.1% for all steroid hormones using three spiked concentrations. CONCLUSIONS: A novel LC/MS/MS method was developed for the simultaneous quantification of seven kinds of trace steroid hormones in human saliva. The results of the methodological study showed that the method exhibited excellent sensitivity and reliability for the evaluation of free steroid hormones in the human body. It is believed that this method could provide useful information of steroid hormone metabolism for auxiliary diagnosis of some endocrine disorders.

Cellulose filter paper immobilized α-glucosidase and its application to screening inhibitors from traditional Chinese medicine.

In this study, α-glucosidase was successfully immobilized on cellulose filter paper and further applied to screening inhibitors from traditional Chinese medicines combined with capillary electrophoresis analysis. For α-glucosidase immobilization, a cellulose filter paper was used as the carrier and grafted with amino groups by coating chitosan, then α-glucosidase was covalently bonded on the amino-modified carrier via epoxy ring-opening reaction using polyethylene glycol diglycidyl ether as the crosslinker. Several parameters influencing the enzyme immobilization were optimized and the optimal values were enzyme concentration of 4 U/mL, polyethylene glycol diglycidyl ether concentration of 1.25%, chitosan concentration of 7.5 mg/mL, immobilization pH 7.0, crosslinking time of 4 h and immobilization time of 2 h. The immobilized α-glucosidase exhibited good batch-to-batch reproducibility (RSD = 2.1%, n = 5), excellent storage stability (73.5% of its initial activity after being stored at 4°C for 15 days), and reusability (75% of its initial activity after 10 repeated cycles). The Michaelis constant of immobilized α-glucosidase and half-maximal inhibitory concentration of acarbose were calculated to be 1.12 mM and 0.38 µM, respectively. Finally, the immobilized α-glucosidase was used for screening inhibitors from 14 kinds of Traditional Chinese Medicine extracts, and Sanguisorbae Radix showed the strongest inhibitory effect on α-glucosidase.

Design of a Highly Sensitive Reduced Graphene Oxide/Graphene Oxide@Cellulose Acetate/Thermoplastic Polyurethane Flexible Sensor.

As a substitute for rigid sensors, flexible sensing materials have been greatly developed in recent years, but maintaining the stability of conductive fillers and the stability of micro-strain sensing is still a major challenge. In this experiment, we innovatively prepared a polyurethane-based cellulose acetate composite membrane (CA/TPU) with abundant mesopores through electrospinning. Then, we reduced graphene oxide (rGO)-as a conductive filler-and graphene oxide (GO)-as an insulating layer-which were successively and firmly anchored on the CA/TPU nanofiber membrane with the ultrasonic impregnation method, to obtain an rGO/GO@CA/TPU sensor with a GF of 3.006 under a very small strain of 0.5%. The flexibility of the film and its high sensitivity under extremely low strains enables the detection of subtle human motions (such as finger bending, joint motion, etc.), making it suitable for potential application in wearable electronic devices.

Hydrogel Dressing Containing Basic Fibroblast Growth Factor Accelerating Chronic Wound Healing in Aged Mouse Model.

Due to the decreasing self-repairing ability, elder people are easier to form chronic wounds and suffer from slow and difficult wound healing. It is desirable to develop a novel wound dressing that can accelerate chronic wound healing in elderly subjects to decrease the pain of patients and save medical resources. In this work, Heparin and basic fibroblast growth factor(bFGF) were dissolved in the mixing solution of 4-arm acrylated polyethylene glycol and dithiothreitol to form hydrogel dressing in vitro at room temperature without any catalysts, which is convenient and easy to handle in clinic application. In vitro re-lease test shows the bFGF could be continuously released for at least 7 days, whereas the dressing surface integrity maintained for 3 days degradation in PBS solution. Three groups of treatments including bFGF-Gel, bFGF-Sol and control without any treatment were applied on the full-thickness wound on the 22 months old mice back. The wound closure rate and histological and immunohistochemical staining all illustrated that bFGF-Gel displayed a better wound healing effect than the other two groups. Thus, as-prepared hydrogel dressing seems supe-rior to current clinical treatment and more effective in elderly subjects, which shows promising potential to be applied in the clinic.

Recurrent retinal detachment after pars plana vitrectomy with silicone oil tamponade for rhegmatogenous retinal detachment.

BACKGROUND: The recurrence of retinal detachment following rhegmatogenous retinal detachment (RRD) is a relatively common complication that can lead to reduced visual acuity and requires further surgery. The purpose of this study was to investigate the risk factors and visual outcomes of recurrent RRD following pars plana vitrectomy (PPV) with silicone oil tamponade for primary RRD. METHODS: This was a retrospective follow-up study of 343 eyes that underwent initial PPV surgery with silicone oil tamponade for primary RRD. Patients were divided into a recurrence group and a reattachment group. The main outcome measures included causative factors, visual outcomes related to the recurrence of RRD, and the perioperative factors most affecting the recurrence of RRD. RESULTS: After retinal reattachment, we observed RRD recurrence after PPV for primary RRD in 42 out of 343 eyes (12.2%) during the follow-up period. Most causes of recurrence (69%) occurred within 6 months of surgery. Multivariate logistic regression analysis showed that a PVR ≥ Grade C (odds ratio [OR]: 4.015; 95% confidence interval [CI] 1.721-9.367; P = 0.001) was a significant predictor for the development of recurrent RRD. Compared with the reattachment group, the recurrence group exhibited a significant decline in best-corrected visual acuity (BCVA) at the last follow-up visit (P = 0.000). Eyes with PVR prior to primary surgery, or at the diagnosis of re-detachment, showed a worse final BCVA. CONCLUSIONS: Our analysis shows that the predominant risk factor for the recurrence of RRD is a PVR ≥ Grade C. PVR prior to primary surgery, or at the diagnosis of re-detachment, was also shown to limit the recovery of final visual acuity.

High failure rate after Beta-tricalcium phosphate grafting for the treatment of femoral head osteonecrosis: a retrospective analysis.

BACKGROUND: Non-vascularized bone grafting is a promising head-preserving technique for younger patients diagnosed as non-traumatic osteonecrosis of the femoral head (NONFH). Among the various types of bone grafting techniques, "light-bulb" procedure grafting with synthetic bone substitute is an attractive option. We aimed to assess the effectiveness of using beta-tricalcium phosphate (ß-TCP) for the treatment of pre-collapse and early post-collapse lesions NONFH. METHODS: From April 2010 to June 2014, 33 patients (47 hips) with NONFH were treated using the afore-mentioned technique. The clinical and radiological outcomes were recorded and compared statistically between pre- and post-operation. Harris hip score (HHS) was used to evaluate the clinical results, and Association Research Circulation Osseous (ARCO) stage was applied to assess the radiological outcomes. RESULTS: The 5-years survival rate of using ß-TCP grafting was accounting for 25.5%. HHS was decreased from 78.47 to 52.87 points, and a very significant worsening of radiological results were revealed (P <  0.05). Two hips collapsed more than 2 mm were awaiting for THA, and 33 of the 47 hips had converted to THAs in an average time to failure of 24.24 months postoperatively. Meanwhile, only 4 hips survived without collapse, and 8 hips collapsed less than 2 mm. After surgery, the time onset of head collapse was 3.65 months on average, and the first conversion to THA was performed at 5 months postoperative. CONCLUSIONS: Our results suggest that "light-bulb" procedure grafting with ß-TCP sticks presented with a high failure rate in the early postoperative period. It is not proposed for the treatment of pre-collapse and early post-collapse lesions NONFH.

A Simple and Effective Technique for Production of Pycnidia and Pycnidiospores by Macrophomina phaseolina.

Production of pycnidia and pycnidiospores by Macrophomina phaseolina is not often seen in vitro. The objective of this study is to develop a simple and effective technique to obtain pycnidiospores of M. phaseolina isolates in vitro and to evaluate germination rates and pathogenicity of pycnidiospores. We found M. phaseolina isolates can produce pycnidia on oatmeal agar (OMA) under ultraviolet light with 365 nm wavelength (UV). For evaluating the effect of OMA and UV on growth of M. phaseolina, combinations of two agar media and three lighting conditions were tested. The results confirm that all six M. phaseolina isolates produced pycnidia only on OMA under UV. The pycnidiospores produced on OMA under UV had germination rates higher than 90%. In pathogenicity tests, inoculation with the pycnidiospores showed symptoms later than inoculation with hypha-colonized toothpicks. Significant differences in the pathogenicity is detected between isolates Mp2014003 and Mp2014024 when inoculation is done with the pycnidiospores (P < 0.001), but not when hypha-colonized toothpicks are used as inoculum (P = 0.091). This study provides a new method for obtaining pycnidiospores of M. phaseolina for future investigations.

Boric Acid as a Coupling Agent for Preparation of Phenolic Resin Containing Boron and Silicon with Enhanced Char Yield.

In this study, an innovative, facile, and low-cost method is developed to prepare phenolic resin (PR) containing boron and silicon (BSiPR). BSiPR is synthesized by a solvent-free, one-pot method using boric acid as the coupling agent instead of silane, and methyltriethoxysilane as the silicon source. The results show that boron and silicon elements are introduced into PR via BOC and BOSi structures. The char yield of the resulting resin at 800 °C is improved to 76%. The reasons for higher char yield are investigated. The formation of BOC can reduce the content of phenolic hydroxyl, which helps to decrease the weight loss. B2 O3 is also formed at 400 °C, and it can prevent the release of carbon oxides. Moreover, thermally stable BOSi and SiO structures remain stable during the pyrolysis. In addition, the mechanical and ablative properties of fiber-reinforced composites are also enhanced.

A systematic evaluation of the error detection abilities of a new diode transmission detector.

Transmission detectors meant to measure every beam delivered on a linear accelerator are now becoming available for monitoring the quality of the dose distribution delivered to the patient daily. The purpose of this work is to present results from a systematic evaluation of the error detection capabilities of one such detector, the Delta4 Discover. Existing patient treatment plans were modified through in-house-developed software to mimic various delivery errors that have been observed in the past. Errors included shifts in multileaf collimator leaf positions, changing the beam energy from what was planned, and a simulation of what would happen if the secondary collimator jaws did not track with the leaves as they moved. The study was done for simple 3D plans, static gantry intensity modulated radiation therapy plans as well as dynamic arc and volumetric modulated arc therapy (VMAT) plans. Baseline plans were delivered with both the Discover device and the Delta4 Phantom+ to establish baseline gamma pass rates. Modified plans were then delivered using the Discover only and the predicted change in gamma pass rate, as well as the detected leaf positions were evaluated. Leaf deviations as small as 0.5 mm for a static three-dimensional field were detected, with this detection limit growing to 1 mm with more complex delivery modalities such as VMAT. The gamma pass rates dropped noticeably once the intentional leaf error introduced was greater than the distance-to-agreement criterion. The unit also demonstrated the desired drop in gamma pass rates of at least 20% when jaw tracking was intentionally disabled and when an incorrect energy was used for the delivery. With its ability to find errors intentionally introduced into delivered plans, the Discover shows promise of being a valuable, independent error detection tool that should serve to detect delivery errors that can occur during radiotherapy treatment.

Macromolecularly Crowded Protocells from Reversibly Shrinking Monodisperse Liposomes.

The compartmentalization of cell-free gene expression systems in liposomes provides an attractive route to the formation of protocells, but these models do not capture the physical (crowded) environment found in living systems. Here, we present a microfluidics-based route to produce monodisperse liposomes that can shrink almost 3 orders of magnitude without compromising their stability. We demonstrate that our strategy is compatible with cell-free gene expression and show increased protein production rates in crowded liposome protocells.

Fluorometric determination of nucleic acids based on the use of polydopamine nanotubes and target-induced strand displacement amplification.

The authors describe a fluorometric method for the quantitation of nucleic acids by combining (a) cycled strand displacement amplification, (b) the unique features of the DNA probe SYBR Green, and (c) polydopamine nanotubes. SYBR Green undergoes strong fluorescence enhancement upon intercalation into double-stranded DNA (dsDNA). The polydopamine nanotubes selectively adsorb single-stranded DNA (ssDNA) and molecular beacons. In the absence of target DNA, the molecular beacon, primer and SYBR Green are adsorbed on the surface of polydopamine nanotubes. This results in quenching of the fluorescence of SYBR Green, typically measured at excitation/emission wavelengths of 488/518 nm. Upon addition of analyte (target DNA) and polymerase, the stem of the molecular beacon is opened so that it can bind to the primer. This triggers target strand displacement polymerization, during which dsDNA is synthesized. The hybridized target is then displaced due to the strand displacement activity of the polymerase. The displaced target hybridizes with another molecular beacon. This triggers the next round of polymerization. Consequently, a large amount of dsDNA is formed which is detected by addition of SYBR Green. Thus, sensitive and selective fluorometric detection is realized. The fluorescent sensing strategy shows very good analytical performances towards DNA detection, such as a wide linear range from 0.05 to 25 nM with a low limit of detection of 20 pM. Graphical abstract Schematic of a fluorometric strategy for highly sensitive and selective determination of nucleic acids by combining strand displacement amplification and the unique features of SYBR Green I (SG) and polydopamine nanotubes.

TLR3 signaling in macrophages is indispensable for the protective immunity of invariant natural killer T cells against enterovirus 71 infection.

Enterovirus 71 (EV71) is the most virulent pathogen among enteroviruses that cause hand, foot and mouth disease in children but rarely in adults. The mechanisms that determine the age-dependent susceptibility remain largely unclear. Here, we found that the paucity of invariant natural killer T (iNKT) cells together with immaturity of the immune system was related to the susceptibility of neonatal mice to EV71 infection. iNKT cells were crucial antiviral effector cells to protect young mice from EV71 infection before their adaptive immune systems were fully mature. EV71 infection led to activation of iNKT cells depending on signaling through TLR3 but not other TLRs. Surprisingly, iNKT cell activation during EV71 infection required TLR3 signaling in macrophages, but not in dendritic cells (DCs). Mechanistically, interleukin (IL)-12 and endogenous CD1d-restricted antigens were both required for full activation of iNKT cells. Furthermore, CD1d-deficiency led to dramatically increased viral loads in central nervous system and more severe disease in EV71-infected mice. Altogether, our results suggest that iNKT cells may be involved in controlling EV71 infection in children when their adaptive immune systems are not fully developed, and also imply that iNKT cells might be an intervention target for treating EV71-infected patients.

Thermoresponsive and Active Functional Fiber Mats for Cultured Cell Recovery.

Thermoresponsive and active functional fiber mats were prepared from random copolymer of poly(pentafluorophenyl acrylate-co-N-isopropylacrylamide) (P(PFPA-co-NIPAM)), which was synthesized by a controlled radical polymerization process based on reversible addition-fragmentation chain transfer (RAFT). As reactive sites, pentafluorophenyl ester (PFP) groups were incorporated in the copolymer to allow for a multiple post-polymerization modification. UV-cross-linkable moieties were first introduced by partially reacting PFP groups in the copolymer with ortho-nitrobenzyl (ONB)-protected diamine. Electrospinning the resulting ONB-containing P(PFPA-co-NIPAM), followed by UV-induced cross-linking, yielded stable cross-linked thermoresponsive PNIPAM-based fiber mats. The remaining PFP active groups on the surface of copolymer fiber mats allowed for further conjugation with an H-Gly-Arg-Gly-Asp-Ser-OH (GRGDS) peptide, a well-known cell adhesive peptide sequence that was selected as a model in order to promote cell growth. At 37 °C, fibroblast cells were found to attach, spread, and proliferate well on the GRGDS-immobilized cross-linked (CL) fiber mat, as opposed to those on the GRGDS-immobilized un-cross-linked (UCL) fiber mat. By decreasing the temperature down to 20 °C, i.e. below the lower critical solution temperature (LCST) of thermoresponsive PNIPAM, cultured cells could easily be released from both GRGDS-immobilized CL and UCL fiber mats, whereas no cells were detached from tissue culture polystyrene (TCPS). These results suggest that the thermosensitive and active functional fiber mat obtained in this research represent an attractive and versatile platform for cultured cell recovery, which is beneficial for tissue engineering applications.

Optical resolution and mechanism using enantioselective cellulose, sodium alginate and hydroxypropyl-ß-cyclodextrin membranes.

Chiral solid membranes of cellulose, sodium alginate, and hydroxypropyl-ß-cyclodextrin were prepared for chiral dialysis separations. After optimizing the membrane material concentrations, the membrane preparation conditions and the feed concentrations, enantiomeric excesses of 89.1%, 42.6%, and 59.1% were obtained for mandelic acid on the cellulose membrane, p-hydroxy phenylglycine on the sodium alginate membrane, and p-hydroxy phenylglycine on the hydroxypropyl-ß-cyclodextrin membrane, respectively. To study the optical resolution mechanism, chiral discrimination by membrane adsorption, solid phase extraction, membrane chromatography, high-pressure liquid chromatography ultrafiltration were performed. All of the experimental results showed that the first adsorbed enantiomer was not the enantiomer that first permeated the membrane. The crystal structures of mandelic acid and p-hydroxy phenylglycine are the racematic compounds. We suggest that the chiral separation mechanism of the solid membrane is "adsorption - association - diffusion," which is able to explain the optical resolution of the enantioselective membrane. This is also the first report in which solid membranes of sodium alginate and hydroxypropyl-ß-cyclodextrin were used in the chiral separation of p-hydroxy phenylglycine.

Glucose solution determination based on liquid photoacoustic resonance.

Noninvasive blood glucose determination has received considerable attention in the past from both patients and scientists all over the world, and it is becoming increasingly important as a research focus. The two most difficult problems leading to no breakthrough in this area are sensitivity and specificity in determination. In order to obtain reliable measurement results of blood glucose levels, we propose a new liquid photoacoustic resonance theory that can significantly enhance the intensity of the signal and improve the sensitivity. This paper demonstrates the theory of liquid photoacoustic resonance, gives a rigorous mathematical expression, and analyzes the variation of the transducer output in the case of liquid photoacoustic resonance. A signal processing method is demonstrated at the same time under the liquid photoacoustic resonance condition. Meanwhile, the feasibility and validity are verified by experiments with different concentrations of glucose solution. The result shows that liquid photoacoustic resonance can strengthen the signal, and the resolution achieves 20 mg/dL. This method overcomes the issue of low sensitivity and the inaccurate detection in the nonresonant case, and gets accurate results. This result could provide a theoretical basis for realization of noninvasive measurement of blood glucose.